thr3ads.net - Xen devel - [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7 [May 2011]

If this information is useful, please help other people find it:
Share via:

Anthony Wright

2011-May-31 12:07 UTC

[Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

I build Xen 4.1.0 and linux 2.6.38.7 from source to do a DIY system based on
Linux From Scratch (LFS).

When I try to read from a USB memory stick (around 64M big), I get corruption on
the latest version of Xen.

With Xen 3.x and linux 2.6.18 I can read the memory stick no problems.

If I use the linux 2.6.38.7 kernel without a Xen hypervisor I can read the
memory stick without problems.

If I use the same setup, but this time introduce the Xen 4.1.0 hypervisor I get
random blocks of sectors on the USB disk returning all zeros. Normally these
blocks change each time I reboot, but are fixed once they''ve been
established. On one occasion the blocks changed continuously each time I looked
at the disk (I have a big file on the USB disk and I run md5sum before accessing
it).

Just to remove other possibilities I''ve checked the system''s
RAM and it''s fine (I''ve seen similar problems before with
dodgy RAM). If I try to access a hard disk or CDROM, everything is fine.

This could be a problem with the way I''ve built the kernel or Xen, but
it seems to suggest that there''s a bug in Xen.

I''m happy to try to isolate the problem further if it can''t be
reproduced elsewhere. My first suggestion would be to use a known good binary
copy of xen 4.1.0 and/or linux 2.6.38.7 if anybody can supply one.

thanks,

Anthony Wright

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-May-31 14:54 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Tue, May 31, 2011 at 01:07:49PM +0100, Anthony Wright
wrote:> I build Xen 4.1.0 and linux 2.6.38.7 from source to do a DIY system based
on Linux From Scratch (LFS).
Ok.. Had you tried my #devel/next-2.6.38 branch in the past?
> 
> When I try to read from a USB memory stick (around 64M big), I get
corruption on the latest version of Xen.
So this is from dom0 kernel, right?
> 
> With Xen 3.x and linux 2.6.18 I can read the memory stick no problems.
> 
> If I use the linux 2.6.38.7 kernel without a Xen hypervisor I can read the
memory stick without problems.
> 
> If I use the same setup, but this time introduce the Xen 4.1.0 hypervisor I
get random blocks of sectors on the USB disk returning all zeros. Normally these
blocks change each time I reboot, but are fixed once they''ve been
established. On one occasion the blocks changed continuously each time I looked
at the disk (I have a big file on the USB disk and I run md5sum before accessing
it).
What is the filesystem on the USB disk?> 
> Just to remove other possibilities I''ve checked the
system''s RAM and it''s fine (I''ve seen similar
problems before with dodgy RAM). If I try to access a hard disk or CDROM,
everything is fine.
> 
> This could be a problem with the way I''ve built the kernel or Xen,
but it seems to suggest that there''s a bug in Xen.
> 
> I''m happy to try to isolate the problem further if it
can''t be reproduced elsewhere. My first suggestion would be to use a
known good binary copy of xen 4.1.0 and/or linux 2.6.38.7 if anybody can supply
one.
<sigh>Please provide serial log or dmesg output.> 
> thanks,
> 
> Anthony Wright
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Ian Pratt

2011-Jun-01 08:53 UTC

head link

RE: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

> If I use the same setup, but this time introduce the Xen 4.1.0 hypervisor I
get
> random blocks of sectors on the USB disk returning all zeros. Normally
these
> blocks change each time I reboot, but are fixed once they've been
> established. On one occasion the blocks changed continuously each time I
> looked at the disk (I have a big file on the USB disk and I run md5sum
before
> accessing it).
Does the issue go away if you limit the total amount of memory visible to xen to
4GB? (mem=4096M on the xen command line)

If so, I suspect this is a swiotlb or latent UHCI driver issue. The easiest way
of working around it is just to ensure all dom0 memory gets allocated below 4GB,
but it would be good to investigate properly.

Ian 

 > Just to remove other possibilities I've checked the system's RAM
and it's fine
> (I've seen similar problems before with dodgy RAM). If I try to access
a hard
> disk or CDROM, everything is fine.
> 
> This could be a problem with the way I've built the kernel or Xen, but
it
> seems to suggest that there's a bug in Xen.
> 
> I'm happy to try to isolate the problem further if it can't be
reproduced
> elsewhere. My first suggestion would be to use a known good binary copy of
> xen 4.1.0 and/or linux 2.6.38.7 if anybody can supply one.
> 
> thanks,
> 
> Anthony Wright
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-01 09:52 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On 31/05/2011 15:54, Konrad Rzeszutek Wilk wrote:> Ok.. Had you tried my #devel/next-2.6.38 branch in the past?
Yes I tried one of your devel kernels in the past, but switched back to stock
linux when I realised that Dom0 functionality was now in that. I''m
willing to give a devel kernel a go if you think it would help.
> So this is from dom0 kernel, right?
The corruption occurs in the Dom0 kernel.
> What is the filesystem on the USB disk?
The filesystem on the USB disk is ext2. It''s a slightly funny format
because while the memory stick is a 2GB memory stick, it''s partitioned
and formatted as a 64MB memory stick. I''ve done an md5sum on the raw
/dev/sdX device under a system that works and under a system that''s
faulty and I get different results, so I suspect the fault''s below the
file system.
> <sigh>Please provide serial log or dmesg output.
dmesg output is attached, but it doesn''t show anything that I can see
(I boot off a CD and then mount the USB memory stick - the fsck errors at the
end)

On 01/06/2011 09:53, Ian Pratt wrote:> Does the issue go away if you limit the total amount of memory visible to
xen to 4GB? (mem=4096M on the xen command line)
> 
> If so, I suspect this is a swiotlb or latent UHCI driver issue. The easiest
way of working around it is just to ensure all > dom0 memory gets allocated
below 4GB, but it would be good to investigate properly.
Yes! I put mem=4096M on the xen command line as asked and everything starts
working as it should yea!

Anthony.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-01 14:23 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

> > Does the issue go away if you limit the total amount of memory visible
to xen to 4GB? (mem=4096M on the xen command line)
> > 
> > If so, I suspect this is a swiotlb or latent UHCI driver issue. The
easiest way of working around it is just to ensure all > dom0 memory gets
allocated below 4GB, but it would be good to investigate properly.
> 
> Yes! I put mem=4096M on the xen command line as asked and everything starts
working as it should yea!
<scratches his head> This is most unexpected. Do you get the same problem
if you boot
baremetal and do ''iommu=soft'' (without the mem=4G)? You should
see the same error.
Can you attach your lspci -vvv output too please? This is the motherboard you
have right?
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-02 12:24 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

> Do you get the same problem if you boot baremetal and do
''iommu=soft'' (without the mem=4G)? You should see the same
error.I''m not quite sure what you mean by "boot baremetal", but
I''ve just done a boot where I removed the mem=4096M options from the
Xen boot line and added an ''iommu=soft'' option. The result of
this was a corrupt USB device again.
> Can you attach your lspci -vvv output too please?attached.
> This is the motherboard you have right?
> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613Yes that''s the motherboard.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-02 14:38 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright
wrote:> > Do you get the same problem if you boot baremetal and do
''iommu=soft'' (without the mem=4G)? You should see the same
error.
> I''m not quite sure what you mean by "boot baremetal",
but I''ve just done a boot where I removed the mem=4096M options from
the Xen boot line and added an ''iommu=soft'' option. The result
of this was a corrupt USB device again.
Baremetal = no Xen.> 
> > Can you attach your lspci -vvv output too please?
> attached.
> 
> > This is the motherboard you have right?
> > http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
> Yes that''s the motherboard.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-02 14:44 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk
wrote:> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
> > > Do you get the same problem if you boot baremetal and do
''iommu=soft'' (without the mem=4G)? You should see the same
error.
> > I''m not quite sure what you mean by "boot
baremetal", but I''ve just done a boot where I removed the
mem=4096M options from the Xen boot line and added an
''iommu=soft'' option. The result of this was a corrupt USB
device again.
> 
> Baremetal = no Xen.
> > 
> > > Can you attach your lspci -vvv output too please?
> > attached.
> > 
> > > This is the motherboard you have right?
> > > http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
> > Yes that''s the motherboard.
I''ve an BIOSTART motherboard that looks to have a similar EHCI
controller - MCP61 based.
Is the USB stick that you are using any special? Or is just a normal one?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-02 15:59 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On 02/06/2011 15:44, Konrad Rzeszutek Wilk wrote:> On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
>> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
>>>> Do you get the same problem if you boot baremetal and do
''iommu=soft'' (without the mem=4G)? You should see the same
error.
>>> I''m not quite sure what you mean by "boot
baremetal", but I''ve just done a boot where I removed the
mem=4096M options from the Xen boot line and added an
''iommu=soft'' option. The result of this was a corrupt USB
device again.
>> Baremetal = no Xen.Tried a baremetal boot (no Xen) with ''''iommu=soft" on the
linux command
line, and the USB reads fine.> I''ve an BIOSTART motherboard that looks to have a similar EHCI
controller - MCP61 based.
> Is the USB stick that you are using any special? Or is just a normal one?It''s a Kingston DataTraveler G2 (2GB). It''s the cheapest
memory stick I
could find at the time, nothing special as far as I know.

I''ll try to get the kernel sorted out to get around the screen
corruption tonight, and try on another system tomorrow and with a
different memory stick too.

Cheers,

Anthony.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-09 13:11 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

I''ve got things running on a number of systems now, and have tried a
number of combinations. I have changed machines and USB memory sticks,
and the fault seems to be related to the machine rather than the memory
stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
memory sticks doesn''t have any effect, but only two out of the three
machines I tried has a problem, the third works fine.

I have previously attached the lspci -vvv for one of the machines that
fails, and the lspci -vvv for the second machine is attached to an email
relating to the screen corruption problems I was having a few days ago
(Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
some systems).

Cheers,

Anthony

On 02/06/2011 15:44, Konrad Rzeszutek Wilk wrote:> On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
>> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
>>>> Do you get the same problem if you boot baremetal and do
''iommu=soft'' (without the mem=4G)? You should see the same
error.
>>> I''m not quite sure what you mean by "boot
baremetal", but I''ve just done a boot where I removed the
mem=4096M options from the Xen boot line and added an
''iommu=soft'' option. The result of this was a corrupt USB
device again.
>> Baremetal = no Xen.
>>>> Can you attach your lspci -vvv output too please?
>>> attached.
>>>
>>>> This is the motherboard you have right?
>>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
>>> Yes that''s the motherboard.
> I''ve an BIOSTART motherboard that looks to have a similar EHCI
controller - MCP61 based.
> Is the USB stick that you are using any special? Or is just a normal one?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Ian Pratt

2011-Jun-09 13:25 UTC

head link

RE: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

> I''ve got things running on a number of systems now, and have tried
a
> number of combinations. I have changed machines and USB memory sticks,
> and the fault seems to be related to the machine rather than the memory
> stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> memory sticks doesn''t have any effect, but only two out of the
three
> machines I tried has a problem, the third works fine.
If you''re copying the data from the hard disk, you should check that
you have the BIOS set to operate the SATA controller in AHCI mode rather than
legacy IDE.  I''ve seen the legacy IDE driver tickle swiotlb issues too
above 4GB.

Ian
> I have previously attached the lspci -vvv for one of the machines that
> fails, and the lspci -vvv for the second machine is attached to an email
> relating to the screen corruption problems I was having a few days ago
> (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
> some systems).
> 
> Cheers,
> 
> Anthony
> 
> On 02/06/2011 15:44, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 02, 2011 at 10:38:07AM -0400, Konrad Rzeszutek Wilk wrote:
> >> On Thu, Jun 02, 2011 at 01:24:56PM +0100, Anthony Wright wrote:
> >>>> Do you get the same problem if you boot baremetal and do
> ''iommu=soft'' (without the mem=4G)? You should see the
same error.
> >>> I''m not quite sure what you mean by "boot
baremetal", but I''ve just
> done a boot where I removed the mem=4096M options from the Xen boot
> line and added an ''iommu=soft'' option. The result of this
was a corrupt USB
> device again.
> >> Baremetal = no Xen.
> >>>> Can you attach your lspci -vvv output too please?
> >>> attached.
> >>>
> >>>> This is the motherboard you have right?
> >>>>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16813131613
> >>> Yes that''s the motherboard.
> > I''ve an BIOSTART motherboard that looks to have a similar
EHCI controller -
> MCP61 based.
> > Is the USB stick that you are using any special? Or is just a normal
one?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-09 13:32 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright
wrote:> I''ve got things running on a number of systems now, and have tried
a
> number of combinations. I have changed machines and USB memory sticks,
> and the fault seems to be related to the machine rather than the memory
> stick. I have 3 machines with >4GB ram & 2 memory sticks, changing
> memory sticks doesn''t have any effect, but only two out of the
three
> machines I tried has a problem, the third works fine.
One of them was an MCP61 based (BIOSTAR) and the other is
SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
I vagually remember something about quirks for those boards for the AHCI
controller.

Let me see if I can reproduce this issue on my box next
week.> 
> I have previously attached the lspci -vvv for one of the machines that
> fails, and the lspci -vvv for the second machine is attached to an email
> relating to the screen corruption problems I was having a few days ago
Right, and the screen corruption was due to a lacking patch (the VGA
support).> (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39 on
> some systems).
There was a crash too? What was that due too?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-09 13:40 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On 09/06/2011 14:32, Konrad Rzeszutek Wilk wrote:>
>> I have previously attached the lspci -vvv for one of the machines that
>> fails, and the lspci -vvv for the second machine is attached to an
email
>> relating to the screen corruption problems I was having a few days ago
> Right, and the screen corruption was due to a lacking patch (the VGA
support).
>> (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39
on
>> some systems).
> There was a crash too? What was that due too?The crash I''m refering to was related to the VGA corruption I had that
was fixed in stable/2.6.39.x. The screen filled with junk on the
handover from Xen to Dom0 and I presumed the system had crashed at that
point. The crash is unrelated to the USB problem.

Anthony.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-10 16:46 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk
wrote:> On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > I''ve got things running on a number of systems now, and have
tried a
> > number of combinations. I have changed machines and USB memory sticks,
> > and the fault seems to be related to the machine rather than the
memory
> > stick. I have 3 machines with >4GB ram & 2 memory sticks,
changing
> > memory sticks doesn''t have any effect, but only two out of
the three
> > machines I tried has a problem, the third works fine.
> 
> One of them was an MCP61 based (BIOSTAR) and the other is
> SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
> I vagually remember something about quirks for those boards for the AHCI
> controller.
> 
> Let me see if I can reproduce this issue on my box next week.
I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
and couldn''t reproduce it. But let me try to put in some more memory
and see.
> > 
> > I have previously attached the lspci -vvv for one of the machines that
> > fails, and the lspci -vvv for the second machine is attached to an
email
> > relating to the screen corruption problems I was having a few days ago
> 
> Right, and the screen corruption was due to a lacking patch (the VGA
support).
> > (Screen corruption and crash at boot with Xen 4.1.0 & linux 2.6.39
on
> > some systems).
> 
> There was a crash too? What was that due too?
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-13 22:06 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Fri, Jun 10, 2011 at 12:46:56PM -0400, Konrad Rzeszutek Wilk
wrote:> On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > > I''ve got things running on a number of systems now, and
have tried a
> > > number of combinations. I have changed machines and USB memory
sticks,
> > > and the fault seems to be related to the machine rather than the
memory
> > > stick. I have 3 machines with >4GB ram & 2 memory sticks,
changing
> > > memory sticks doesn''t have any effect, but only two out
of the three
> > > machines I tried has a problem, the third works fine.
> > 
> > One of them was an MCP61 based (BIOSTAR) and the other is
> > SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
> > I vagually remember something about quirks for those boards for the
AHCI
> > controller.
> > 
> > Let me see if I can reproduce this issue on my box next week.
> 
> I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
> and couldn''t reproduce it. But let me try to put in some more
memory and see.
So, playing around on a 8gB machine with ballooning memory up (I had initially
set
only 2GB to dom0) and then using the md5sum I was able to trigger this once.

You said you are hitting this everytime right? Do you limit the amount of memory
to the initial domain?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-15 10:45 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

I hit it every time, though with slight variations on which blocks are affected.
I get the problem on two out of three of my machines. I don''t supply
any command line options to Xen or the kernel. I do use an initramfs.

----- Original Message -----
From: "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
To: "Anthony Wright" <anthony@overnetdata.com>
Cc: "Ian Pratt" <Ian.Pratt@eu.citrix.com>,
xen-devel@lists.xensource.com
Sent: Monday, 13 June, 2011 11:06:25 PM
Subject: Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Fri, Jun 10, 2011 at 12:46:56PM -0400, Konrad Rzeszutek Wilk
wrote:> On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > > I''ve got things running on a number of systems now, and
have tried a
> > > number of combinations. I have changed machines and USB memory
sticks,
> > > and the fault seems to be related to the machine rather than the
memory
> > > stick. I have 3 machines with >4GB ram & 2 memory sticks,
changing
> > > memory sticks doesn''t have any effect, but only two out
of the three
> > > machines I tried has a problem, the third works fine.
> > 
> > One of them was an MCP61 based (BIOSTAR) and the other is
> > SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ... and
> > I vagually remember something about quirks for those boards for the
AHCI
> > controller.
> > 
> > Let me see if I can reproduce this issue on my box next week.
> 
> I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
> and couldn''t reproduce it. But let me try to put in some more
memory and see.
So, playing around on a 8gB machine with ballooning memory up (I had initially
set
only 2GB to dom0) and then using the md5sum I was able to trigger this once.

You said you are hitting this everytime right? Do you limit the amount of memory
to the initial domain?

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Ian Pratt

2011-Jun-15 11:43 UTC

head link

RE: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

> I hit it every time, though with slight variations on which blocks are
affected. I
> get the problem on two out of three of my machines. I don't supply any
> command line options to Xen or the kernel. I do use an initramfs.
If you're seeing the issue I think you are, you'll be vulnerable to it
whenever any of dom0's memory is allocated above 4GB.

If you patch xen to always allocate dom0's memory from below 4GB I bet you
don't see the issue (though obviously you'll be limited to having a dom0
that is a bit smaller than 4GB). The real bug is probably in the EHCI
driver's use of swiotlb.


Ian
> ----- Original Message -----
> From: "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
> To: "Anthony Wright" <anthony@overnetdata.com>
> Cc: "Ian Pratt" <Ian.Pratt@eu.citrix.com>,
xen-devel@lists.xensource.com
> Sent: Monday, 13 June, 2011 11:06:25 PM
> Subject: Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux
2.6.38.7
> 
> On Fri, Jun 10, 2011 at 12:46:56PM -0400, Konrad Rzeszutek Wilk wrote:
> > On Thu, Jun 09, 2011 at 09:32:08AM -0400, Konrad Rzeszutek Wilk wrote:
> > > On Thu, Jun 09, 2011 at 02:11:27PM +0100, Anthony Wright wrote:
> > > > I've got things running on a number of systems now, and
have tried a
> > > > number of combinations. I have changed machines and USB
memory
> sticks,
> > > > and the fault seems to be related to the machine rather than
the
> memory
> > > > stick. I have 3 machines with >4GB ram & 2 memory
sticks, changing
> > > > memory sticks doesn't have any effect, but only two out
of the three
> > > > machines I tried has a problem, the third works fine.
> > >
> > > One of them was an MCP61 based (BIOSTAR) and the other is
> > > SB600 (Gigabyte gs_ma69vm_s2) Southbridge. Both are AMD based ...
> and
> > > I vagually remember something about quirks for those boards for
the
> AHCI
> > > controller.
> > >
> > > Let me see if I can reproduce this issue on my box next week.
> >
> > I tried on my BIOSTAR Group N61PB-M2S which has 4GB physically
> > and couldn't reproduce it. But let me try to put in some more
memory and
> see.
> 
> So, playing around on a 8gB machine with ballooning memory up (I had
> initially set
> only 2GB to dom0) and then using the md5sum I was able to trigger this
once.
> 
> You said you are hitting this everytime right? Do you limit the amount of
> memory
> to the initial domain?
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-16 20:10 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Wed, Jun 15, 2011 at 11:45:33AM +0100, Anthony Wright
wrote:> I hit it every time, though with slight variations on which blocks are
affected. I get the problem on two out of three of my machines. I don''t
supply any command line options to Xen or the kernel. I do use an initramfs.
So a couple of things popped at when looking at this:

a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back to
PIO"

That is not good. Somehow it wasn''t able to set a 32-bit mask.
Don''t know
if that is due to the driver or just that the kernel can''t do it (b/c
it
was compiled with some special options).

b). Are you using some special .config option? If you were to use a normal
 distro would you see this?

c). You are using a 32-bit dom0. Didn''t notice it until now so I wonder
  if there are some lingering issues (for example not flushing the highmemory
  mappings) that are at foot. Had you tried a 64-bit kernel before?

d). Does the problem exist if you try it with a 2.6.39 kernel or the 3.0-rc3?

e). Can you run lspci -n ? There is a pretty big file in
drivers/usb/host/pci-quirks.c
  Want to check against your machine.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jun-17 09:45 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On 16/06/2011 21:10, Konrad Rzeszutek Wilk wrote:> So a couple of things popped at when looking at this:
> a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling back
to PIO"
>
> That is not good. Somehow it wasn''t able to set a 32-bit mask.
Don''t know
> if that is due to the driver or just that the kernel can''t do it
(b/c it
> was compiled with some special options).
I never saw anything in dmesg or any other logs.> b). Are you using some special .config option? If you were to use a normal
>  distro would you see this?
My config is attached.> c). You are using a 32-bit dom0. Didn''t notice it until now so I
wonder
>   if there are some lingering issues (for example not flushing the
highmemory
>   mappings) that are at foot. Had you tried a 64-bit kernel before?I haven''t tried 64 bit because I need a 32 bit
kernel.> d). Does the problem exist if you try it with a 2.6.39 kernel or the
3.0-rc3?It happens on every kernel I''ve tried which is 2.6.39, 2.6.39.x &
3.0-rc3> e). Can you run lspci -n ? There is a pretty big file in
drivers/usb/host/pci-quirks.c
>   Want to check against your machine.I have the problem on two machines and have attached the lspci -n for
both of them.




_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Konrad Rzeszutek Wilk

2011-Jun-20 12:39 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On Fri, Jun 17, 2011 at 10:45:41AM +0100, Anthony Wright
wrote:> On 16/06/2011 21:10, Konrad Rzeszutek Wilk wrote:
> > So a couple of things popped at when looking at this:
> > a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask, falling
back to PIO"
> >
> > That is not good. Somehow it wasn''t able to set a 32-bit
mask. Don''t know
> > if that is due to the driver or just that the kernel can''t do
it (b/c it
> > was compiled with some special options).
> I never saw anything in dmesg or any other logs.
Uh, I copied that from your logs.
> > b). Are you using some special .config option? If you were to use a
normal
> >  distro would you see this?
> My config is attached.
Great.> > c). You are using a 32-bit dom0. Didn''t notice it until now
so I wonder
> >   if there are some lingering issues (for example not flushing the
highmemory
> >   mappings) that are at foot. Had you tried a 64-bit kernel before?
> I haven''t tried 64 bit because I need a 32 bit kernel.
> > d). Does the problem exist if you try it with a 2.6.39 kernel or the
3.0-rc3?
> It happens on every kernel I''ve tried which is 2.6.39, 2.6.39.x
& 3.0-rc3
> > e). Can you run lspci -n ? There is a pretty big file in
drivers/usb/host/pci-quirks.c
> >   Want to check against your machine.
> I have the problem on two machines and have attached the lspci -n for
> both of them.
Is it possible for you provide this binary blob/USB disk somewhere so I can
test it on my hardware?
> #
> # Automatically generated make config: don''t edit
> # Linux/i386 3.0.0-rc3 Kernel Configuration
> #
> # CONFIG_64BIT is not set
> CONFIG_X86_32=y
> # CONFIG_X86_64 is not set
> CONFIG_X86=y
> CONFIG_INSTRUCTION_DECODER=y
> CONFIG_OUTPUT_FORMAT="elf32-i386"
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> # CONFIG_NEED_DMA_MAP_STATE is not set
> CONFIG_NEED_SG_DMA_LENGTH=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_GPIO=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> # CONFIG_GENERIC_TIME_VSYSCALL is not set
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
> CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
> # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> # CONFIG_ZONE_DMA32 is not set
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> # CONFIG_AUDIT_ARCH is not set
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_X86_32_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_32_LAZY_GS=y
> CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
> CONFIG_KTIME_SCALAR=y
> CONFIG_ARCH_CPU_PROBE_RELEASE=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> CONFIG_CONSTRUCTORS=y
> CONFIG_HAVE_IRQ_WORK=y
> CONFIG_IRQ_WORK=y
> 
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_CROSS_COMPILE=""
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_HAVE_KERNEL_XZ=y
> CONFIG_HAVE_KERNEL_LZO=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> # CONFIG_KERNEL_XZ is not set
> # CONFIG_KERNEL_LZO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> # CONFIG_FHANDLE is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_TASK_XACCT=y
> CONFIG_TASK_IO_ACCOUNTING=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_WATCH=y
> CONFIG_AUDIT_TREE=y
> CONFIG_HAVE_GENERIC_HARDIRQS=y
> 
> #
> # IRQ subsystem
> #
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_HAVE_SPARSE_IRQ=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_IRQ_SHOW=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_IRQ_FORCED_THREADING=y
> CONFIG_SPARSE_IRQ=y
> 
> #
> # RCU Subsystem
> #
> CONFIG_TREE_RCU=y
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_RCU_TRACE is not set
> CONFIG_RCU_FANOUT=32
> # CONFIG_RCU_FANOUT_EXACT is not set
> # CONFIG_RCU_FAST_NO_HZ is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> CONFIG_CGROUPS=y
> # CONFIG_CGROUP_DEBUG is not set
> # CONFIG_CGROUP_FREEZER is not set
> CONFIG_CGROUP_DEVICE=y
> CONFIG_CPUSETS=y
> CONFIG_PROC_PID_CPUSET=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_RESOURCE_COUNTERS=y
> # CONFIG_CGROUP_MEM_RES_CTLR is not set
> # CONFIG_CGROUP_PERF is not set
> CONFIG_CGROUP_SCHED=y
> CONFIG_FAIR_GROUP_SCHED=y
> CONFIG_RT_GROUP_SCHED=y
> # CONFIG_BLK_CGROUP is not set
> CONFIG_NAMESPACES=y
> CONFIG_UTS_NS=y
> CONFIG_IPC_NS=y
> CONFIG_USER_NS=y
> CONFIG_PID_NS=y
> # CONFIG_NET_NS is not set
> # CONFIG_SCHED_AUTOGROUP is not set
> # CONFIG_SYSFS_DEPRECATED is not set
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_RD_XZ=y
> CONFIG_RD_LZO=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EXPERT is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> # CONFIG_EMBEDDED is not set
> CONFIG_HAVE_PERF_EVENTS=y
> 
> #
> # Kernel Performance Events And Counters
> #
> CONFIG_PERF_EVENTS=y
> CONFIG_PERF_COUNTERS=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_PCI_QUIRKS=y
> CONFIG_SLUB_DEBUG=y
> # CONFIG_COMPAT_BRK is not set
> # CONFIG_SLAB is not set
> CONFIG_SLUB=y
> # CONFIG_PROFILING is not set
> CONFIG_HAVE_OPROFILE=y
> # CONFIG_KPROBES is not set
> # CONFIG_JUMP_LABEL is not set
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_OPTPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_ATTRS=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_HAVE_HW_BREAKPOINT=y
> CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
> CONFIG_HAVE_USER_RETURN_NOTIFIER=y
> CONFIG_HAVE_PERF_EVENTS_NMI=y
> CONFIG_HAVE_ARCH_JUMP_LABEL=y
> 
> #
> # GCOV-based kernel profiling
> #
> CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODVERSIONS is not set
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> CONFIG_LBDAF=y
> CONFIG_BLK_DEV_BSG=y
> CONFIG_BLK_DEV_INTEGRITY=y
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> # CONFIG_INLINE_SPIN_TRYLOCK is not set
> # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
> # CONFIG_INLINE_SPIN_LOCK is not set
> # CONFIG_INLINE_SPIN_LOCK_BH is not set
> # CONFIG_INLINE_SPIN_LOCK_IRQ is not set
> # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
> CONFIG_INLINE_SPIN_UNLOCK=y
> # CONFIG_INLINE_SPIN_UNLOCK_BH is not set
> CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
> # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
> # CONFIG_INLINE_READ_TRYLOCK is not set
> # CONFIG_INLINE_READ_LOCK is not set
> # CONFIG_INLINE_READ_LOCK_BH is not set
> # CONFIG_INLINE_READ_LOCK_IRQ is not set
> # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
> CONFIG_INLINE_READ_UNLOCK=y
> # CONFIG_INLINE_READ_UNLOCK_BH is not set
> CONFIG_INLINE_READ_UNLOCK_IRQ=y
> # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
> # CONFIG_INLINE_WRITE_TRYLOCK is not set
> # CONFIG_INLINE_WRITE_LOCK is not set
> # CONFIG_INLINE_WRITE_LOCK_BH is not set
> # CONFIG_INLINE_WRITE_LOCK_IRQ is not set
> # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
> CONFIG_INLINE_WRITE_UNLOCK=y
> # CONFIG_INLINE_WRITE_UNLOCK_BH is not set
> CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
> # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
> CONFIG_MUTEX_SPIN_ON_OWNER=y
> CONFIG_FREEZER=y
> 
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> CONFIG_X86_MPPARSE=y
> # CONFIG_X86_BIGSMP is not set
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_MRST is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_32_NON_STANDARD is not set
> CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_X86_32_IRIS is not set
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> CONFIG_PARAVIRT_GUEST=y
> CONFIG_XEN=y
> CONFIG_XEN_DOM0=y
> CONFIG_XEN_PRIVILEGED_GUEST=y
> CONFIG_XEN_PVHVM=y
> CONFIG_XEN_MAX_DOMAIN_MEMORY=128
> CONFIG_XEN_SAVE_RESTORE=y
> # CONFIG_XEN_DEBUG is not set
> CONFIG_KVM_CLOCK=y
> # CONFIG_KVM_GUEST is not set
> # CONFIG_LGUEST_GUEST is not set
> CONFIG_PARAVIRT=y
> CONFIG_PARAVIRT_SPINLOCKS=y
> CONFIG_PARAVIRT_CLOCK=y
> CONFIG_NO_BOOTMEM=y
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MELAN is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MCORE2 is not set
> # CONFIG_MATOM is not set
> CONFIG_X86_GENERIC=y
> CONFIG_X86_INTERNODE_CACHE_SHIFT=7
> CONFIG_X86_CMPXCHG=y
> CONFIG_CMPXCHG_LOCAL=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_XADD=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=5
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_CYRIX_32=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> CONFIG_CPU_SUP_TRANSMETA_32=y
> CONFIG_CPU_SUP_UMC_32=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> # CONFIG_IOMMU_API is not set
> CONFIG_NR_CPUS=8
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_IRQ_TIME_ACCOUNTING is not set
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> # CONFIG_X86_ANCIENT_MCE is not set
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_X86_THERMAL_VECTOR=y
> CONFIG_VM86=y
> CONFIG_TOSHIBA=y
> CONFIG_I8K=y
> # CONFIG_X86_REBOOTFIXUPS is not set
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_INTEL=y
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_NOHIGHMEM is not set
> # CONFIG_HIGHMEM4G is not set
> CONFIG_HIGHMEM64G=y
> CONFIG_PAGE_OFFSET=0xC0000000
> CONFIG_HIGHMEM=y
> CONFIG_X86_PAE=y
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ILLEGAL_POINTER_VALUE=0
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_SPARSEMEM_STATIC=y
> CONFIG_HAVE_MEMBLOCK=y
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> # CONFIG_COMPACTION is not set
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MMU_NOTIFIER=y
> # CONFIG_KSM is not set
> CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
> # CONFIG_MEMORY_FAILURE is not set
> # CONFIG_TRANSPARENT_HUGEPAGE is not set
> # CONFIG_CLEANCACHE is not set
> # CONFIG_HIGHPTE is not set
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW=64
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> CONFIG_X86_PAT=y
> CONFIG_ARCH_USES_PG_UNCACHED=y
> CONFIG_EFI=y
> CONFIG_SECCOMP=y
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_SCHED_HRTICK=y
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> CONFIG_PHYSICAL_START=0x400000
> CONFIG_RELOCATABLE=y
> CONFIG_X86_NEED_RELOCS=y
> CONFIG_PHYSICAL_ALIGN=0x400000
> CONFIG_HOTPLUG_CPU=y
> # CONFIG_COMPAT_VDSO is not set
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> 
> #
> # Power management and ACPI options
> #
> # CONFIG_SUSPEND is not set
> CONFIG_HIBERNATE_CALLBACKS=y
> # CONFIG_HIBERNATION is not set
> CONFIG_PM_SLEEP=y
> CONFIG_PM_SLEEP_SMP=y
> # CONFIG_PM_RUNTIME is not set
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_ACPI=y
> # CONFIG_ACPI_PROCFS is not set
> # CONFIG_ACPI_PROCFS_POWER is not set
> # CONFIG_ACPI_EC_DEBUGFS is not set
> # CONFIG_ACPI_PROC_EVENT is not set
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_PROCESSOR=y
> # CONFIG_ACPI_IPMI is not set
> CONFIG_ACPI_HOTPLUG_CPU=y
> # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=1999
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_PCI_SLOT=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_SBS=y
> # CONFIG_ACPI_HED is not set
> # CONFIG_ACPI_APEI is not set
> # CONFIG_SFI is not set
> # CONFIG_APM is not set
> 
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_STAT_DETAILS=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> 
> #
> # x86 CPU frequency scaling drivers
> #
> # CONFIG_X86_PCC_CPUFREQ is not set
> CONFIG_X86_ACPI_CPUFREQ=y
> # CONFIG_X86_POWERNOW_K6 is not set
> CONFIG_X86_POWERNOW_K7=y
> CONFIG_X86_POWERNOW_K7_ACPI=y
> CONFIG_X86_POWERNOW_K8=y
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_SPEEDSTEP_ICH=y
> CONFIG_X86_SPEEDSTEP_SMI=y
> CONFIG_X86_P4_CLOCKMOD=y
> # CONFIG_X86_CPUFREQ_NFORCE2 is not set
> CONFIG_X86_LONGRUN=y
> # CONFIG_X86_LONGHAUL is not set
> CONFIG_X86_E_POWERSAVER=y
> 
> #
> # shared options
> #
> CONFIG_X86_SPEEDSTEP_LIB=y
> # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
> CONFIG_CPU_IDLE_GOV_MENU=y
> # CONFIG_INTEL_IDLE is not set
> 
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GOMMCONFIG is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_XEN=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_PCI_CNB20LE_QUIRK is not set
> # CONFIG_DMAR is not set
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=y
> CONFIG_PCIEAER=y
> # CONFIG_PCIE_ECRC is not set
> # CONFIG_PCIEAER_INJECT is not set
> CONFIG_PCIEASPM=y
> # CONFIG_PCIEASPM_DEBUG is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_STUB=y
> CONFIG_XEN_PCIDEV_FRONTEND=y
> CONFIG_HT_IRQ=y
> # CONFIG_PCI_IOV is not set
> CONFIG_PCI_IOAPIC=y
> CONFIG_PCI_LABEL=y
> CONFIG_ISA_DMA_API=y
> CONFIG_ISA=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> CONFIG_AMD_NB=y
> CONFIG_PCCARD=y
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_CARDBUS=y
> 
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> CONFIG_PD6729=y
> CONFIG_I82092=y
> CONFIG_I82365=y
> # CONFIG_TCIC is not set
> CONFIG_PCMCIA_PROBE=y
> CONFIG_PCCARD_NONSTATIC=y
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_FAKE=y
> CONFIG_HOTPLUG_PCI_COMPAQ=y
> # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
> CONFIG_HOTPLUG_PCI_IBM=y
> CONFIG_HOTPLUG_PCI_ACPI=y
> CONFIG_HOTPLUG_PCI_ACPI_IBM=y
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> # CONFIG_HOTPLUG_PCI_SHPC is not set
> # CONFIG_RAPIDIO is not set
> 
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> CONFIG_HAVE_AOUT=y
> # CONFIG_BINFMT_AOUT is not set
> CONFIG_BINFMT_MISC=y
> CONFIG_HAVE_ATOMIC_IOMAP=y
> CONFIG_HAVE_TEXT_POKE_SMP=y
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=y
> CONFIG_XFRM_SUB_POLICY=y
> CONFIG_XFRM_MIGRATE=y
> CONFIG_XFRM_STATISTICS=y
> CONFIG_XFRM_IPCOMP=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> # CONFIG_IP_FIB_TRIE_STATS is not set
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> CONFIG_IP_ROUTE_CLASSID=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=y
> # CONFIG_NET_IPGRE_DEMUX is not set
> CONFIG_IP_MROUTE=y
> # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> CONFIG_INET_TUNNEL=y
> # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> # CONFIG_INET_XFRM_MODE_TUNNEL is not set
> # CONFIG_INET_XFRM_MODE_BEET is not set
> CONFIG_INET_LRO=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_TCP_CONG_WESTWOOD=y
> CONFIG_TCP_CONG_HTCP=y
> CONFIG_TCP_CONG_HSTCP=y
> CONFIG_TCP_CONG_HYBLA=y
> CONFIG_TCP_CONG_VEGAS=y
> CONFIG_TCP_CONG_SCALABLE=y
> CONFIG_TCP_CONG_LP=y
> CONFIG_TCP_CONG_VENO=y
> CONFIG_TCP_CONG_YEAH=y
> CONFIG_TCP_CONG_ILLINOIS=y
> # CONFIG_DEFAULT_BIC is not set
> CONFIG_DEFAULT_CUBIC=y
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_HYBLA is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_VENO is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="cubic"
> CONFIG_TCP_MD5SIG=y
> CONFIG_IPV6=y
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=y
> CONFIG_INET6_ESP=y
> CONFIG_INET6_IPCOMP=y
> CONFIG_IPV6_MIP6=y
> CONFIG_INET6_XFRM_TUNNEL=y
> CONFIG_INET6_TUNNEL=y
> CONFIG_INET6_XFRM_MODE_TRANSPORT=y
> CONFIG_INET6_XFRM_MODE_TUNNEL=y
> CONFIG_INET6_XFRM_MODE_BEET=y
> CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
> CONFIG_IPV6_SIT=y
> # CONFIG_IPV6_SIT_6RD is not set
> CONFIG_IPV6_NDISC_NODETYPE=y
> CONFIG_IPV6_TUNNEL=y
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_SUBTREES=y
> CONFIG_IPV6_MROUTE=y
> # CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
> CONFIG_IPV6_PIMSM_V2=y
> CONFIG_NETWORK_SECMARK=y
> # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=y
> 
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=y
> CONFIG_NETFILTER_NETLINK_QUEUE=y
> CONFIG_NETFILTER_NETLINK_LOG=y
> CONFIG_NF_CONNTRACK=y
> CONFIG_NF_CONNTRACK_MARK=y
> CONFIG_NF_CONNTRACK_SECMARK=y
> # CONFIG_NF_CONNTRACK_ZONES is not set
> CONFIG_NF_CONNTRACK_EVENTS=y
> CONFIG_NF_CONNTRACK_TIMESTAMP=y
> CONFIG_NF_CT_PROTO_DCCP=y
> CONFIG_NF_CT_PROTO_GRE=y
> CONFIG_NF_CT_PROTO_SCTP=y
> CONFIG_NF_CT_PROTO_UDPLITE=y
> CONFIG_NF_CONNTRACK_AMANDA=y
> CONFIG_NF_CONNTRACK_FTP=y
> CONFIG_NF_CONNTRACK_H323=y
> CONFIG_NF_CONNTRACK_IRC=y
> CONFIG_NF_CONNTRACK_BROADCAST=y
> CONFIG_NF_CONNTRACK_NETBIOS_NS=y
> CONFIG_NF_CONNTRACK_SNMP=y
> CONFIG_NF_CONNTRACK_PPTP=y
> CONFIG_NF_CONNTRACK_SANE=y
> CONFIG_NF_CONNTRACK_SIP=y
> CONFIG_NF_CONNTRACK_TFTP=y
> CONFIG_NF_CT_NETLINK=y
> CONFIG_NETFILTER_TPROXY=y
> CONFIG_NETFILTER_XTABLES=y
> 
> #
> # Xtables combined modules
> #
> CONFIG_NETFILTER_XT_MARK=y
> CONFIG_NETFILTER_XT_CONNMARK=y
> # CONFIG_NETFILTER_XT_SET is not set
> 
> #
> # Xtables targets
> #
> CONFIG_NETFILTER_XT_TARGET_AUDIT=y
> CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
> CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
> CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
> CONFIG_NETFILTER_XT_TARGET_CT=y
> CONFIG_NETFILTER_XT_TARGET_DSCP=y
> CONFIG_NETFILTER_XT_TARGET_HL=y
> CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
> CONFIG_NETFILTER_XT_TARGET_LED=y
> CONFIG_NETFILTER_XT_TARGET_MARK=y
> CONFIG_NETFILTER_XT_TARGET_NFLOG=y
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
> CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
> CONFIG_NETFILTER_XT_TARGET_RATEEST=y
> CONFIG_NETFILTER_XT_TARGET_TEE=y
> CONFIG_NETFILTER_XT_TARGET_TPROXY=y
> CONFIG_NETFILTER_XT_TARGET_TRACE=y
> CONFIG_NETFILTER_XT_TARGET_SECMARK=y
> CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
> CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
> 
> #
> # Xtables matches
> #
> CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
> CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
> CONFIG_NETFILTER_XT_MATCH_COMMENT=y
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
> CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
> # CONFIG_NETFILTER_XT_MATCH_CPU is not set
> CONFIG_NETFILTER_XT_MATCH_DCCP=y
> CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
> CONFIG_NETFILTER_XT_MATCH_DSCP=y
> CONFIG_NETFILTER_XT_MATCH_ESP=y
> CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
> CONFIG_NETFILTER_XT_MATCH_HELPER=y
> CONFIG_NETFILTER_XT_MATCH_HL=y
> CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
> CONFIG_NETFILTER_XT_MATCH_IPVS=y
> CONFIG_NETFILTER_XT_MATCH_LENGTH=y
> CONFIG_NETFILTER_XT_MATCH_LIMIT=y
> CONFIG_NETFILTER_XT_MATCH_MAC=y
> CONFIG_NETFILTER_XT_MATCH_MARK=y
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
> CONFIG_NETFILTER_XT_MATCH_OSF=y
> CONFIG_NETFILTER_XT_MATCH_OWNER=y
> CONFIG_NETFILTER_XT_MATCH_POLICY=y
> CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
> CONFIG_NETFILTER_XT_MATCH_QUOTA=y
> CONFIG_NETFILTER_XT_MATCH_RATEEST=y
> CONFIG_NETFILTER_XT_MATCH_REALM=y
> CONFIG_NETFILTER_XT_MATCH_RECENT=y
> CONFIG_NETFILTER_XT_MATCH_SCTP=y
> CONFIG_NETFILTER_XT_MATCH_SOCKET=y
> CONFIG_NETFILTER_XT_MATCH_STATE=y
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
> CONFIG_NETFILTER_XT_MATCH_STRING=y
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
> CONFIG_NETFILTER_XT_MATCH_TIME=y
> CONFIG_NETFILTER_XT_MATCH_U32=y
> CONFIG_IP_SET=y
> CONFIG_IP_SET_MAX=256
> CONFIG_IP_SET_BITMAP_IP=y
> CONFIG_IP_SET_BITMAP_IPMAC=y
> CONFIG_IP_SET_BITMAP_PORT=y
> CONFIG_IP_SET_HASH_IP=y
> CONFIG_IP_SET_HASH_IPPORT=y
> CONFIG_IP_SET_HASH_IPPORTIP=y
> CONFIG_IP_SET_HASH_IPPORTNET=y
> CONFIG_IP_SET_HASH_NET=y
> CONFIG_IP_SET_HASH_NETPORT=y
> CONFIG_IP_SET_LIST_SET=y
> CONFIG_IP_VS=y
> CONFIG_IP_VS_IPV6=y
> # CONFIG_IP_VS_DEBUG is not set
> CONFIG_IP_VS_TAB_BITS=12
> 
> #
> # IPVS transport protocol load balancing support
> #
> CONFIG_IP_VS_PROTO_TCP=y
> CONFIG_IP_VS_PROTO_UDP=y
> CONFIG_IP_VS_PROTO_AH_ESP=y
> CONFIG_IP_VS_PROTO_ESP=y
> CONFIG_IP_VS_PROTO_AH=y
> CONFIG_IP_VS_PROTO_SCTP=y
> 
> #
> # IPVS scheduler
> #
> CONFIG_IP_VS_RR=y
> CONFIG_IP_VS_WRR=y
> CONFIG_IP_VS_LC=y
> CONFIG_IP_VS_WLC=y
> CONFIG_IP_VS_LBLC=y
> CONFIG_IP_VS_LBLCR=y
> CONFIG_IP_VS_DH=y
> CONFIG_IP_VS_SH=y
> CONFIG_IP_VS_SED=y
> CONFIG_IP_VS_NQ=y
> 
> #
> # IPVS application helper
> #
> CONFIG_IP_VS_FTP=y
> CONFIG_IP_VS_NFCT=y
> CONFIG_IP_VS_PE_SIP=y
> 
> #
> # IP: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV4=y
> CONFIG_NF_CONNTRACK_IPV4=y
> # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
> CONFIG_IP_NF_QUEUE=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_AH=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_NF_NAT=y
> CONFIG_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_IP_NF_TARGET_NETMAP=y
> CONFIG_IP_NF_TARGET_REDIRECT=y
> CONFIG_NF_NAT_SNMP_BASIC=y
> CONFIG_NF_NAT_PROTO_DCCP=y
> CONFIG_NF_NAT_PROTO_GRE=y
> CONFIG_NF_NAT_PROTO_UDPLITE=y
> CONFIG_NF_NAT_PROTO_SCTP=y
> CONFIG_NF_NAT_FTP=y
> CONFIG_NF_NAT_IRC=y
> CONFIG_NF_NAT_TFTP=y
> CONFIG_NF_NAT_AMANDA=y
> CONFIG_NF_NAT_PPTP=y
> CONFIG_NF_NAT_H323=y
> CONFIG_NF_NAT_SIP=y
> CONFIG_IP_NF_MANGLE=y
> CONFIG_IP_NF_TARGET_CLUSTERIP=y
> CONFIG_IP_NF_TARGET_ECN=y
> CONFIG_IP_NF_TARGET_TTL=y
> CONFIG_IP_NF_RAW=y
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=y
> CONFIG_IP_NF_ARP_MANGLE=y
> 
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_NF_DEFRAG_IPV6=y
> CONFIG_NF_CONNTRACK_IPV6=y
> CONFIG_IP6_NF_QUEUE=y
> CONFIG_IP6_NF_IPTABLES=y
> CONFIG_IP6_NF_MATCH_AH=y
> CONFIG_IP6_NF_MATCH_EUI64=y
> CONFIG_IP6_NF_MATCH_FRAG=y
> CONFIG_IP6_NF_MATCH_OPTS=y
> CONFIG_IP6_NF_MATCH_HL=y
> CONFIG_IP6_NF_MATCH_IPV6HEADER=y
> CONFIG_IP6_NF_MATCH_MH=y
> CONFIG_IP6_NF_MATCH_RT=y
> CONFIG_IP6_NF_TARGET_HL=y
> CONFIG_IP6_NF_TARGET_LOG=y
> CONFIG_IP6_NF_FILTER=y
> CONFIG_IP6_NF_TARGET_REJECT=y
> CONFIG_IP6_NF_MANGLE=y
> CONFIG_IP6_NF_RAW=y
> CONFIG_BRIDGE_NF_EBTABLES=y
> CONFIG_BRIDGE_EBT_BROUTE=y
> CONFIG_BRIDGE_EBT_T_FILTER=y
> CONFIG_BRIDGE_EBT_T_NAT=y
> CONFIG_BRIDGE_EBT_802_3=y
> CONFIG_BRIDGE_EBT_AMONG=y
> CONFIG_BRIDGE_EBT_ARP=y
> CONFIG_BRIDGE_EBT_IP=y
> CONFIG_BRIDGE_EBT_IP6=y
> CONFIG_BRIDGE_EBT_LIMIT=y
> CONFIG_BRIDGE_EBT_MARK=y
> CONFIG_BRIDGE_EBT_PKTTYPE=y
> CONFIG_BRIDGE_EBT_STP=y
> CONFIG_BRIDGE_EBT_VLAN=y
> CONFIG_BRIDGE_EBT_ARPREPLY=y
> CONFIG_BRIDGE_EBT_DNAT=y
> CONFIG_BRIDGE_EBT_MARK_T=y
> CONFIG_BRIDGE_EBT_REDIRECT=y
> CONFIG_BRIDGE_EBT_SNAT=y
> CONFIG_BRIDGE_EBT_LOG=y
> CONFIG_BRIDGE_EBT_ULOG=y
> CONFIG_BRIDGE_EBT_NFLOG=y
> # CONFIG_IP_DCCP is not set
> CONFIG_IP_SCTP=y
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_RDS is not set
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_L2TP is not set
> CONFIG_STP=y
> CONFIG_GARP=y
> CONFIG_BRIDGE=y
> CONFIG_BRIDGE_IGMP_SNOOPING=y
> # CONFIG_NET_DSA is not set
> CONFIG_VLAN_8021Q=y
> CONFIG_VLAN_8021Q_GVRP=y
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_PHONET is not set
> # CONFIG_IEEE802154 is not set
> CONFIG_NET_SCHED=y
> 
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=y
> CONFIG_NET_SCH_HTB=y
> CONFIG_NET_SCH_HFSC=y
> CONFIG_NET_SCH_PRIO=y
> CONFIG_NET_SCH_MULTIQ=y
> CONFIG_NET_SCH_RED=y
> # CONFIG_NET_SCH_SFB is not set
> CONFIG_NET_SCH_SFQ=y
> CONFIG_NET_SCH_TEQL=y
> CONFIG_NET_SCH_TBF=y
> CONFIG_NET_SCH_GRED=y
> CONFIG_NET_SCH_DSMARK=y
> CONFIG_NET_SCH_NETEM=y
> # CONFIG_NET_SCH_DRR is not set
> # CONFIG_NET_SCH_MQPRIO is not set
> # CONFIG_NET_SCH_CHOKE is not set
> # CONFIG_NET_SCH_QFQ is not set
> CONFIG_NET_SCH_INGRESS=y
> 
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=y
> CONFIG_NET_CLS_TCINDEX=y
> CONFIG_NET_CLS_ROUTE4=y
> CONFIG_NET_CLS_FW=y
> CONFIG_NET_CLS_U32=y
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=y
> CONFIG_NET_CLS_RSVP6=y
> CONFIG_NET_CLS_FLOW=y
> # CONFIG_NET_CLS_CGROUP is not set
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=y
> CONFIG_NET_EMATCH_NBYTE=y
> CONFIG_NET_EMATCH_U32=y
> CONFIG_NET_EMATCH_META=y
> CONFIG_NET_EMATCH_TEXT=y
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=y
> CONFIG_NET_ACT_GACT=y
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=y
> CONFIG_NET_ACT_IPT=y
> CONFIG_NET_ACT_NAT=y
> CONFIG_NET_ACT_PEDIT=y
> CONFIG_NET_ACT_SIMP=y
> CONFIG_NET_ACT_SKBEDIT=y
> # CONFIG_NET_ACT_CSUM is not set
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_SCH_FIFO=y
> # CONFIG_DCB is not set
> # CONFIG_BATMAN_ADV is not set
> CONFIG_RPS=y
> CONFIG_RFS_ACCEL=y
> CONFIG_XPS=y
> 
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=y
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_WEXT_CORE=y
> CONFIG_WEXT_PROC=y
> CONFIG_CFG80211=y
> # CONFIG_NL80211_TESTMODE is not set
> # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
> # CONFIG_CFG80211_REG_DEBUG is not set
> CONFIG_CFG80211_DEFAULT_PS=y
> # CONFIG_CFG80211_INTERNAL_REGDB is not set
> CONFIG_CFG80211_WEXT=y
> CONFIG_WIRELESS_EXT_SYSFS=y
> CONFIG_LIB80211=y
> # CONFIG_LIB80211_DEBUG is not set
> CONFIG_MAC80211=y
> CONFIG_MAC80211_HAS_RC=y
> CONFIG_MAC80211_RC_MINSTREL=y
> CONFIG_MAC80211_RC_MINSTREL_HT=y
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
> # CONFIG_MAC80211_MESH is not set
> CONFIG_MAC80211_LEDS=y
> # CONFIG_MAC80211_DEBUG_MENU is not set
> # CONFIG_WIMAX is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
> # CONFIG_CAIF is not set
> # CONFIG_CEPH_LIB is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> # CONFIG_DEVTMPFS is not set
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_FIRMWARE_IN_KERNEL is not set
> CONFIG_EXTRA_FIRMWARE=""
> CONFIG_SYS_HYPERVISOR=y
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> CONFIG_MTD=y
> # CONFIG_MTD_DEBUG is not set
> # CONFIG_MTD_TESTS is not set
> CONFIG_MTD_REDBOOT_PARTS=y
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> # CONFIG_MTD_CMDLINE_PARTS is not set
> CONFIG_MTD_AR7_PARTS=y
> 
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=y
> CONFIG_MTD_BLKDEVS=y
> CONFIG_MTD_BLOCK=y
> CONFIG_FTL=y
> CONFIG_NFTL=y
> CONFIG_NFTL_RW=y
> CONFIG_INFTL=y
> CONFIG_RFD_FTL=y
> CONFIG_SSFDC=y
> # CONFIG_SM_FTL is not set
> CONFIG_MTD_OOPS=y
> # CONFIG_MTD_SWAP is not set
> 
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=y
> CONFIG_MTD_JEDECPROBE=y
> CONFIG_MTD_GEN_PROBE=y
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_CFI_INTELEXT=y
> CONFIG_MTD_CFI_AMDSTD=y
> CONFIG_MTD_CFI_STAA=y
> CONFIG_MTD_CFI_UTIL=y
> CONFIG_MTD_RAM=y
> CONFIG_MTD_ROM=y
> CONFIG_MTD_ABSENT=y
> 
> #
> # Mapping drivers for chip access
> #
> CONFIG_MTD_COMPLEX_MAPPINGS=y
> # CONFIG_MTD_PHYSMAP is not set
> CONFIG_MTD_SC520CDP=y
> CONFIG_MTD_NETSC520=y
> CONFIG_MTD_TS5500=y
> # CONFIG_MTD_SBC_GXX is not set
> # CONFIG_MTD_AMD76XROM is not set
> # CONFIG_MTD_ICHXROM is not set
> CONFIG_MTD_ESB2ROM=y
> CONFIG_MTD_CK804XROM=y
> CONFIG_MTD_SCB2_FLASH=y
> # CONFIG_MTD_NETtel is not set
> # CONFIG_MTD_L440GX is not set
> CONFIG_MTD_PCI=y
> # CONFIG_MTD_PCMCIA is not set
> # CONFIG_MTD_GPIO_ADDR is not set
> # CONFIG_MTD_INTEL_VR_NOR is not set
> # CONFIG_MTD_PLATRAM is not set
> # CONFIG_MTD_LATCH_ADDR is not set
> 
> #
> # Self-contained MTD device drivers
> #
> CONFIG_MTD_PMC551=y
> # CONFIG_MTD_PMC551_BUGFIX is not set
> # CONFIG_MTD_PMC551_DEBUG is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> CONFIG_MTD_MTDRAM=y
> CONFIG_MTDRAM_TOTAL_SIZE=4096
> CONFIG_MTDRAM_ERASE_SIZE=128
> CONFIG_MTDRAM_ABS_POS=0
> CONFIG_MTD_BLOCK2MTD=y
> 
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
> CONFIG_MTD_NAND_ECC=y
> CONFIG_MTD_NAND_ECC_SMC=y
> CONFIG_MTD_NAND=y
> # CONFIG_MTD_NAND_VERIFY_WRITE is not set
> # CONFIG_MTD_NAND_ECC_BCH is not set
> # CONFIG_MTD_SM_COMMON is not set
> # CONFIG_MTD_NAND_MUSEUM_IDS is not set
> # CONFIG_MTD_NAND_DENALI is not set
> CONFIG_MTD_NAND_IDS=y
> # CONFIG_MTD_NAND_RICOH is not set
> CONFIG_MTD_NAND_DISKONCHIP=y
> # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
> CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
> # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
> CONFIG_MTD_NAND_CAFE=y
> CONFIG_MTD_NAND_CS553X=y
> CONFIG_MTD_NAND_NANDSIM=y
> # CONFIG_MTD_NAND_PLATFORM is not set
> CONFIG_MTD_ALAUDA=y
> # CONFIG_MTD_ONENAND is not set
> 
> #
> # LPDDR flash memory drivers
> #
> # CONFIG_MTD_LPDDR is not set
> CONFIG_MTD_UBI=y
> CONFIG_MTD_UBI_WL_THRESHOLD=4096
> CONFIG_MTD_UBI_BEB_RESERVE=1
> # CONFIG_MTD_UBI_GLUEBI is not set
> # CONFIG_MTD_UBI_DEBUG is not set
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_SERIAL=y
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> CONFIG_PARPORT_PC_PCMCIA=y
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=y
> CONFIG_PNP=y
> CONFIG_PNP_DEBUG_MESSAGES=y
> 
> #
> # Protocols
> #
> CONFIG_ISAPNP=y
> # CONFIG_PNPBIOS is not set
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> CONFIG_BLK_CPQ_DA=y
> CONFIG_BLK_CPQ_CISS_DA=y
> CONFIG_CISS_SCSI_TAPE=y
> CONFIG_BLK_DEV_DAC960=y
> CONFIG_BLK_DEV_UMEM=y
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_CRYPTOLOOP=y
> # CONFIG_BLK_DEV_DRBD is not set
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_OSD=y
> CONFIG_BLK_DEV_SX8=y
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> # CONFIG_BLK_DEV_XIP is not set
> CONFIG_CDROM_PKTCDVD=y
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> CONFIG_ATA_OVER_ETH=y
> CONFIG_XEN_BLKDEV_FRONTEND=y
> CONFIG_XEN_BLKDEV_BACKEND=y
> CONFIG_VIRTIO_BLK=y
> # CONFIG_BLK_DEV_HD is not set
> # CONFIG_BLK_DEV_RBD is not set
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_MISC_DEVICES is not set
> CONFIG_HAVE_IDE=y
> # CONFIG_IDE is not set
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI_MOD=y
> CONFIG_RAID_ATTRS=y
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> CONFIG_SCSI_TGT=y
> CONFIG_SCSI_NETLINK=y
> # CONFIG_SCSI_PROC_FS is not set
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=y
> CONFIG_CHR_DEV_SCH=y
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> CONFIG_SCSI_SCAN_ASYNC=y
> CONFIG_SCSI_WAIT_SCAN=m
> 
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> CONFIG_SCSI_FC_ATTRS=y
> CONFIG_SCSI_FC_TGT_ATTRS=y
> CONFIG_SCSI_ISCSI_ATTRS=y
> CONFIG_SCSI_SAS_ATTRS=y
> CONFIG_SCSI_SAS_LIBSAS=y
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_SCSI_SAS_HOST_SMP=y
> CONFIG_SCSI_SRP_ATTRS=y
> CONFIG_SCSI_SRP_TGT_ATTRS=y
> CONFIG_SCSI_LOWLEVEL=y
> CONFIG_ISCSI_TCP=y
> CONFIG_ISCSI_BOOT_SYSFS=y
> # CONFIG_SCSI_CXGB3_ISCSI is not set
> # CONFIG_SCSI_CXGB4_ISCSI is not set
> # CONFIG_SCSI_BNX2_ISCSI is not set
> # CONFIG_SCSI_BNX2X_FCOE is not set
> # CONFIG_BE2ISCSI is not set
> CONFIG_BLK_DEV_3W_XXXX_RAID=y
> CONFIG_SCSI_HPSA=y
> CONFIG_SCSI_3W_9XXX=y
> CONFIG_SCSI_3W_SAS=y
> CONFIG_SCSI_7000FASST=y
> CONFIG_SCSI_ACARD=y
> CONFIG_SCSI_AHA152X=y
> CONFIG_SCSI_AHA1542=y
> CONFIG_SCSI_AACRAID=y
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC7XXX_OLD=y
> CONFIG_SCSI_AIC79XX=y
> CONFIG_AIC79XX_CMDS_PER_DEVICE=4
> CONFIG_AIC79XX_RESET_DELAY_MS=15000
> # CONFIG_AIC79XX_DEBUG_ENABLE is not set
> CONFIG_AIC79XX_DEBUG_MASK=0
> # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC94XX=y
> # CONFIG_AIC94XX_DEBUG is not set
> CONFIG_SCSI_MVSAS=y
> CONFIG_SCSI_MVSAS_DEBUG=y
> CONFIG_SCSI_DPT_I2O=y
> CONFIG_SCSI_ADVANSYS=y
> CONFIG_SCSI_IN2000=y
> CONFIG_SCSI_ARCMSR=y
> CONFIG_SCSI_ARCMSR_AER=y
> CONFIG_MEGARAID_NEWGEN=y
> CONFIG_MEGARAID_MM=y
> CONFIG_MEGARAID_MAILBOX=y
> CONFIG_MEGARAID_LEGACY=y
> CONFIG_MEGARAID_SAS=y
> CONFIG_SCSI_MPT2SAS=y
> CONFIG_SCSI_MPT2SAS_MAX_SGE=128
> # CONFIG_SCSI_MPT2SAS_LOGGING is not set
> CONFIG_SCSI_HPTIOP=y
> CONFIG_SCSI_BUSLOGIC=y
> CONFIG_SCSI_FLASHPOINT=y
> # CONFIG_VMWARE_PVSCSI is not set
> CONFIG_LIBFC=y
> CONFIG_LIBFCOE=y
> # CONFIG_FCOE is not set
> # CONFIG_FCOE_FNIC is not set
> CONFIG_SCSI_DMX3191D=y
> CONFIG_SCSI_DTC3280=y
> CONFIG_SCSI_EATA=y
> # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
> # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
> CONFIG_SCSI_EATA_MAX_TAGS=16
> CONFIG_SCSI_FUTURE_DOMAIN=y
> CONFIG_SCSI_GDTH=y
> CONFIG_SCSI_GENERIC_NCR5380=y
> CONFIG_SCSI_GENERIC_NCR5380_MMIO=y
> CONFIG_SCSI_GENERIC_NCR53C400=y
> CONFIG_SCSI_IPS=y
> CONFIG_SCSI_INITIO=y
> CONFIG_SCSI_INIA100=y
> CONFIG_SCSI_PPA=y
> CONFIG_SCSI_IMM=y
> # CONFIG_SCSI_IZIP_EPP16 is not set
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> # CONFIG_SCSI_NCR53C406A is not set
> CONFIG_SCSI_STEX=y
> CONFIG_SCSI_SYM53C8XX_2=y
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_SYM53C8XX_MMIO=y
> CONFIG_SCSI_IPR=y
> CONFIG_SCSI_IPR_TRACE=y
> CONFIG_SCSI_IPR_DUMP=y
> CONFIG_SCSI_PAS16=y
> CONFIG_SCSI_QLOGIC_FAS=y
> CONFIG_SCSI_QLOGIC_1280=y
> CONFIG_SCSI_QLA_FC=y
> CONFIG_SCSI_QLA_ISCSI=y
> CONFIG_SCSI_LPFC=y
> CONFIG_SCSI_SYM53C416=y
> CONFIG_SCSI_DC395x=y
> CONFIG_SCSI_DC390T=y
> CONFIG_SCSI_T128=y
> CONFIG_SCSI_U14_34F=y
> # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
> # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
> CONFIG_SCSI_U14_34F_MAX_TAGS=8
> CONFIG_SCSI_ULTRASTOR=y
> CONFIG_SCSI_NSP32=y
> # CONFIG_SCSI_DEBUG is not set
> CONFIG_SCSI_PMCRAID=y
> CONFIG_SCSI_PM8001=y
> CONFIG_SCSI_SRP=y
> CONFIG_SCSI_BFA_FC=y
> CONFIG_SCSI_LOWLEVEL_PCMCIA=y
> CONFIG_PCMCIA_AHA152X=m
> CONFIG_PCMCIA_FDOMAIN=m
> CONFIG_PCMCIA_NINJA_SCSI=m
> CONFIG_PCMCIA_QLOGIC=m
> CONFIG_PCMCIA_SYM53C500=m
> CONFIG_SCSI_DH=y
> CONFIG_SCSI_DH_RDAC=y
> CONFIG_SCSI_DH_HP_SW=y
> CONFIG_SCSI_DH_EMC=y
> CONFIG_SCSI_DH_ALUA=y
> CONFIG_SCSI_OSD_INITIATOR=y
> CONFIG_SCSI_OSD_ULD=y
> CONFIG_SCSI_OSD_DPRINT_SENSE=1
> # CONFIG_SCSI_OSD_DEBUG is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_VERBOSE_ERROR=y
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> 
> #
> # Controllers with non-SFF native interface
> #
> CONFIG_SATA_AHCI=y
> CONFIG_SATA_AHCI_PLATFORM=y
> CONFIG_SATA_INIC162X=y
> CONFIG_SATA_ACARD_AHCI=y
> CONFIG_SATA_SIL24=y
> CONFIG_ATA_SFF=y
> 
> #
> # SFF controllers with custom DMA interface
> #
> CONFIG_PDC_ADMA=y
> CONFIG_SATA_QSTOR=y
> CONFIG_SATA_SX4=y
> CONFIG_ATA_BMDMA=y
> 
> #
> # SATA SFF controllers with BMDMA
> #
> CONFIG_ATA_PIIX=y
> CONFIG_SATA_MV=y
> CONFIG_SATA_NV=y
> CONFIG_SATA_PROMISE=y
> CONFIG_SATA_SIL=y
> CONFIG_SATA_SIS=y
> CONFIG_SATA_SVW=y
> CONFIG_SATA_ULI=y
> CONFIG_SATA_VIA=y
> CONFIG_SATA_VITESSE=y
> 
> #
> # PATA SFF controllers with BMDMA
> #
> CONFIG_PATA_ALI=y
> CONFIG_PATA_AMD=y
> CONFIG_PATA_ARASAN_CF=y
> CONFIG_PATA_ARTOP=y
> CONFIG_PATA_ATIIXP=y
> CONFIG_PATA_ATP867X=y
> CONFIG_PATA_CMD64X=y
> CONFIG_PATA_CS5520=y
> CONFIG_PATA_CS5530=y
> CONFIG_PATA_CS5535=y
> CONFIG_PATA_CS5536=y
> CONFIG_PATA_CYPRESS=y
> CONFIG_PATA_EFAR=y
> CONFIG_PATA_HPT366=y
> CONFIG_PATA_HPT37X=y
> CONFIG_PATA_HPT3X2N=y
> CONFIG_PATA_HPT3X3=y
> CONFIG_PATA_HPT3X3_DMA=y
> CONFIG_PATA_IT8213=y
> CONFIG_PATA_IT821X=y
> CONFIG_PATA_JMICRON=y
> CONFIG_PATA_MARVELL=y
> CONFIG_PATA_NETCELL=y
> CONFIG_PATA_NINJA32=y
> CONFIG_PATA_NS87415=y
> CONFIG_PATA_OLDPIIX=y
> CONFIG_PATA_OPTIDMA=y
> CONFIG_PATA_PDC2027X=y
> CONFIG_PATA_PDC_OLD=y
> CONFIG_PATA_RADISYS=y
> CONFIG_PATA_RDC=y
> CONFIG_PATA_SC1200=y
> CONFIG_PATA_SCH=y
> CONFIG_PATA_SERVERWORKS=y
> CONFIG_PATA_SIL680=y
> CONFIG_PATA_SIS=y
> CONFIG_PATA_TOSHIBA=y
> CONFIG_PATA_TRIFLEX=y
> CONFIG_PATA_VIA=y
> CONFIG_PATA_WINBOND=y
> 
> #
> # PIO-only SFF controllers
> #
> CONFIG_PATA_CMD640_PCI=y
> CONFIG_PATA_ISAPNP=y
> CONFIG_PATA_MPIIX=y
> CONFIG_PATA_NS87410=y
> CONFIG_PATA_OPTI=y
> CONFIG_PATA_PCMCIA=y
> CONFIG_PATA_QDI=y
> CONFIG_PATA_RZ1000=y
> CONFIG_PATA_WINBOND_VLB=y
> 
> #
> # Generic fallback / legacy drivers
> #
> CONFIG_PATA_ACPI=y
> CONFIG_ATA_GENERIC=y
> CONFIG_PATA_LEGACY=y
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_RAID0=y
> CONFIG_MD_RAID1=y
> CONFIG_MD_RAID10=y
> CONFIG_MD_RAID456=y
> CONFIG_MULTICORE_RAID456=y
> CONFIG_MD_MULTIPATH=y
> CONFIG_MD_FAULTY=y
> CONFIG_BLK_DEV_DM=y
> CONFIG_DM_DEBUG=y
> CONFIG_DM_CRYPT=y
> CONFIG_DM_SNAPSHOT=y
> CONFIG_DM_MIRROR=y
> CONFIG_DM_RAID=y
> # CONFIG_DM_LOG_USERSPACE is not set
> CONFIG_DM_ZERO=y
> CONFIG_DM_MULTIPATH=y
> CONFIG_DM_MULTIPATH_QL=y
> CONFIG_DM_MULTIPATH_ST=y
> # CONFIG_DM_DELAY is not set
> CONFIG_DM_UEVENT=y
> # CONFIG_DM_FLAKEY is not set
> # CONFIG_TARGET_CORE is not set
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=y
> CONFIG_FUSION_FC=y
> CONFIG_FUSION_SAS=y
> CONFIG_FUSION_MAX_SGE=40
> CONFIG_FUSION_CTL=y
> CONFIG_FUSION_LAN=y
> CONFIG_FUSION_LOGGING=y
> 
> #
> # IEEE 1394 (FireWire) support
> #
> CONFIG_FIREWIRE=y
> CONFIG_FIREWIRE_OHCI=y
> CONFIG_FIREWIRE_OHCI_DEBUG=y
> CONFIG_FIREWIRE_SBP2=y
> CONFIG_FIREWIRE_NET=y
> # CONFIG_FIREWIRE_NOSY is not set
> CONFIG_I2O=y
> # CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
> CONFIG_I2O_EXT_ADAPTEC=y
> CONFIG_I2O_EXT_ADAPTEC_DMA64=y
> CONFIG_I2O_CONFIG=y
> CONFIG_I2O_CONFIG_OLD_IOCTL=y
> CONFIG_I2O_BUS=y
> CONFIG_I2O_BLOCK=y
> CONFIG_I2O_SCSI=y
> CONFIG_I2O_PROC=y
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_IFB=y
> CONFIG_DUMMY=y
> CONFIG_BONDING=y
> CONFIG_MACVLAN=y
> # CONFIG_MACVTAP is not set
> CONFIG_EQUALIZER=y
> CONFIG_TUN=y
> CONFIG_VETH=y
> CONFIG_NET_SB1000=y
> # CONFIG_ARCNET is not set
> CONFIG_MII=y
> CONFIG_PHYLIB=y
> 
> #
> # MII PHY device drivers
> #
> CONFIG_MARVELL_PHY=y
> CONFIG_DAVICOM_PHY=y
> CONFIG_QSEMI_PHY=y
> CONFIG_LXT_PHY=y
> CONFIG_CICADA_PHY=y
> CONFIG_VITESSE_PHY=y
> CONFIG_SMSC_PHY=y
> CONFIG_BROADCOM_PHY=y
> # CONFIG_BCM63XX_PHY is not set
> CONFIG_ICPLUS_PHY=y
> CONFIG_REALTEK_PHY=y
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_STE10XP is not set
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_MICREL_PHY is not set
> # CONFIG_FIXED_PHY is not set
> CONFIG_MDIO_BITBANG=y
> # CONFIG_MDIO_GPIO is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_HAPPYMEAL=y
> CONFIG_SUNGEM=y
> CONFIG_CASSINI=y
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_EL1=y
> CONFIG_EL2=y
> CONFIG_ELPLUS=y
> CONFIG_EL16=y
> CONFIG_EL3=y
> CONFIG_3C515=y
> CONFIG_VORTEX=y
> CONFIG_TYPHOON=y
> CONFIG_LANCE=y
> CONFIG_NET_VENDOR_SMC=y
> CONFIG_WD80x3=y
> CONFIG_ULTRA=y
> CONFIG_SMC9194=y
> CONFIG_ETHOC=y
> CONFIG_NET_VENDOR_RACAL=y
> CONFIG_NI52=y
> CONFIG_NI65=y
> CONFIG_DNET=y
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=y
> CONFIG_DE2104X_DSL=0
> CONFIG_TULIP=y
> # CONFIG_TULIP_MWI is not set
> CONFIG_TULIP_MMIO=y
> # CONFIG_TULIP_NAPI is not set
> CONFIG_DE4X5=y
> CONFIG_WINBOND_840=y
> CONFIG_DM9102=y
> CONFIG_ULI526X=y
> CONFIG_PCMCIA_XIRCOM=y
> CONFIG_AT1700=y
> CONFIG_DEPCA=y
> CONFIG_HP100=y
> CONFIG_NET_ISA=y
> CONFIG_E2100=y
> CONFIG_EWRK3=y
> CONFIG_EEXPRESS=y
> CONFIG_EEXPRESS_PRO=y
> CONFIG_HPLAN_PLUS=y
> CONFIG_HPLAN=y
> CONFIG_LP486E=y
> CONFIG_ETH16I=y
> CONFIG_NE2000=y
> CONFIG_ZNET=y
> CONFIG_SEEQ8005=y
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=y
> CONFIG_AMD8111_ETH=y
> CONFIG_ADAPTEC_STARFIRE=y
> CONFIG_AC3200=y
> CONFIG_KSZ884X_PCI=y
> CONFIG_APRICOT=y
> CONFIG_B44=y
> CONFIG_B44_PCI_AUTOSELECT=y
> CONFIG_B44_PCICORE_AUTOSELECT=y
> CONFIG_B44_PCI=y
> CONFIG_FORCEDETH=y
> CONFIG_CS89x0=y
> CONFIG_E100=y
> CONFIG_FEALNX=y
> CONFIG_NATSEMI=y
> CONFIG_NE2K_PCI=y
> CONFIG_8139CP=y
> CONFIG_8139TOO=y
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> CONFIG_8139TOO_8129=y
> # CONFIG_8139_OLD_RX_RESET is not set
> CONFIG_R6040=y
> CONFIG_SIS900=y
> CONFIG_EPIC100=y
> # CONFIG_SMSC9420 is not set
> CONFIG_SUNDANCE=y
> # CONFIG_SUNDANCE_MMIO is not set
> CONFIG_TLAN=y
> CONFIG_KS8842=y
> CONFIG_KS8851_MLL=y
> CONFIG_VIA_RHINE=y
> CONFIG_VIA_RHINE_MMIO=y
> CONFIG_SC92031=y
> CONFIG_NET_POCKET=y
> CONFIG_ATP=y
> CONFIG_DE600=y
> CONFIG_DE620=y
> CONFIG_ATL2=y
> CONFIG_NETDEV_1000=y
> CONFIG_ACENIC=y
> # CONFIG_ACENIC_OMIT_TIGON_I is not set
> CONFIG_DL2K=y
> CONFIG_E1000=y
> CONFIG_E1000E=y
> CONFIG_IP1000=y
> CONFIG_IGB=y
> CONFIG_IGB_DCA=y
> CONFIG_IGBVF=y
> CONFIG_NS83820=y
> CONFIG_HAMACHI=y
> CONFIG_YELLOWFIN=y
> CONFIG_R8169=y
> CONFIG_SIS190=y
> CONFIG_SKGE=y
> CONFIG_SKY2=y
> CONFIG_VIA_VELOCITY=y
> CONFIG_TIGON3=y
> CONFIG_BNX2=y
> CONFIG_CNIC=y
> CONFIG_QLA3XXX=y
> CONFIG_ATL1=y
> CONFIG_ATL1E=y
> CONFIG_ATL1C=y
> CONFIG_JME=y
> CONFIG_STMMAC_ETH=y
> # CONFIG_STMMAC_DA is not set
> # CONFIG_STMMAC_DUAL_MAC is not set
> CONFIG_PCH_GBE=y
> CONFIG_NETDEV_10000=y
> CONFIG_MDIO=y
> CONFIG_CHELSIO_T1=y
> CONFIG_CHELSIO_T1_1G=y
> CONFIG_CHELSIO_T3=y
> # CONFIG_CHELSIO_T4 is not set
> # CONFIG_CHELSIO_T4VF is not set
> CONFIG_ENIC=y
> CONFIG_IXGBE=y
> CONFIG_IXGBE_DCA=y
> CONFIG_IXGBEVF=y
> CONFIG_IXGB=y
> CONFIG_S2IO=y
> CONFIG_VXGE=y
> # CONFIG_VXGE_DEBUG_TRACE_ALL is not set
> CONFIG_MYRI10GE=y
> CONFIG_MYRI10GE_DCA=y
> CONFIG_NETXEN_NIC=y
> CONFIG_NIU=y
> CONFIG_MLX4_EN=y
> CONFIG_MLX4_CORE=y
> CONFIG_MLX4_DEBUG=y
> CONFIG_TEHUTI=y
> CONFIG_BNX2X=y
> CONFIG_QLCNIC=y
> CONFIG_QLGE=y
> CONFIG_BNA=y
> CONFIG_SFC=y
> CONFIG_SFC_MTD=y
> CONFIG_BE2NET=y
> CONFIG_TR=y
> # CONFIG_IBMTR is not set
> CONFIG_IBMOL=y
> CONFIG_IBMLS=y
> CONFIG_3C359=y
> CONFIG_TMS380TR=y
> CONFIG_TMSPCI=y
> CONFIG_SKISA=y
> CONFIG_PROTEON=y
> CONFIG_ABYSS=y
> CONFIG_SMCTR=y
> # CONFIG_WLAN is not set
> 
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
> 
> #
> # USB Network Adapters
> #
> CONFIG_USB_CATC=y
> CONFIG_USB_KAWETH=y
> CONFIG_USB_PEGASUS=y
> CONFIG_USB_RTL8150=y
> CONFIG_USB_USBNET=y
> CONFIG_USB_NET_AX8817X=y
> CONFIG_USB_NET_CDCETHER=y
> CONFIG_USB_NET_CDC_EEM=y
> CONFIG_USB_NET_CDC_NCM=y
> CONFIG_USB_NET_DM9601=y
> # CONFIG_USB_NET_SMSC75XX is not set
> CONFIG_USB_NET_SMSC95XX=y
> CONFIG_USB_NET_GL620A=y
> CONFIG_USB_NET_NET1080=y
> CONFIG_USB_NET_PLUSB=y
> CONFIG_USB_NET_MCS7830=y
> CONFIG_USB_NET_RNDIS_HOST=y
> CONFIG_USB_NET_CDC_SUBSET=y
> CONFIG_USB_ALI_M5632=y
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_ARMLINUX=y
> CONFIG_USB_EPSON2888=y
> CONFIG_USB_KC2190=y
> CONFIG_USB_NET_ZAURUS=y
> # CONFIG_USB_NET_CX82310_ETH is not set
> CONFIG_USB_NET_INT51X1=y
> # CONFIG_USB_IPHETH is not set
> # CONFIG_USB_SIERRA_NET is not set
> # CONFIG_USB_VL600 is not set
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=y
> CONFIG_PCMCIA_3C574=y
> CONFIG_PCMCIA_FMVJ18X=y
> CONFIG_PCMCIA_PCNET=y
> CONFIG_PCMCIA_NMCLAN=y
> CONFIG_PCMCIA_SMC91C92=y
> CONFIG_PCMCIA_XIRC2PS=y
> CONFIG_PCMCIA_AXNET=y
> CONFIG_PCMCIA_IBMTR=y
> # CONFIG_WAN is not set
> 
> #
> # CAIF transport drivers
> #
> CONFIG_XEN_NETDEV_FRONTEND=y
> CONFIG_XEN_NETDEV_BACKEND=y
> CONFIG_FDDI=y
> CONFIG_DEFXX=y
> # CONFIG_DEFXX_MMIO is not set
> CONFIG_SKFP=y
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=y
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=y
> CONFIG_PPP_SYNC_TTY=y
> CONFIG_PPP_DEFLATE=y
> # CONFIG_PPP_BSDCOMP is not set
> CONFIG_PPP_MPPE=y
> CONFIG_PPPOE=y
> # CONFIG_SLIP is not set
> CONFIG_SLHC=y
> CONFIG_NET_FC=y
> CONFIG_NETCONSOLE=y
> CONFIG_NETCONSOLE_DYNAMIC=y
> CONFIG_NETPOLL=y
> CONFIG_NETPOLL_TRAP=y
> CONFIG_NET_POLL_CONTROLLER=y
> CONFIG_VIRTIO_NET=y
> # CONFIG_VMXNET3 is not set
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> CONFIG_INPUT_POLLDEV=y
> CONFIG_INPUT_SPARSEKMAP=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> # CONFIG_KEYBOARD_ADP5588 is not set
> # CONFIG_KEYBOARD_ADP5589 is not set
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_QT1070 is not set
> # CONFIG_KEYBOARD_QT2160 is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_GPIO_POLLED is not set
> # CONFIG_KEYBOARD_TCA6416 is not set
> # CONFIG_KEYBOARD_MATRIX is not set
> # CONFIG_KEYBOARD_LM8323 is not set
> # CONFIG_KEYBOARD_MAX7359 is not set
> # CONFIG_KEYBOARD_MCS is not set
> # CONFIG_KEYBOARD_MPR121 is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_OPENCORES is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_ELANTECH is not set
> # CONFIG_MOUSE_PS2_SENTELIC is not set
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> CONFIG_MOUSE_SERIAL=y
> CONFIG_MOUSE_APPLETOUCH=y
> CONFIG_MOUSE_BCM5974=y
> # CONFIG_MOUSE_INPORT is not set
> # CONFIG_MOUSE_LOGIBM is not set
> # CONFIG_MOUSE_PC110PAD is not set
> CONFIG_MOUSE_VSXXXAA=y
> # CONFIG_MOUSE_GPIO is not set
> CONFIG_MOUSE_SYNAPTICS_I2C=y
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TABLET is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> # CONFIG_INPUT_AD714X is not set
> CONFIG_INPUT_PCSPKR=y
> # CONFIG_INPUT_APANEL is not set
> # CONFIG_INPUT_WISTRON_BTNS is not set
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> # CONFIG_INPUT_UINPUT is not set
> # CONFIG_INPUT_PCF8574 is not set
> # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> # CONFIG_INPUT_ADXL34X is not set
> # CONFIG_INPUT_CMA3000 is not set
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=y
> # CONFIG_SERIO_ALTERA_PS2 is not set
> # CONFIG_SERIO_PS2MULT is not set
> # CONFIG_GAMEPORT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_NOZOMI=y
> # CONFIG_N_GSM is not set
> # CONFIG_TRACE_SINK is not set
> # CONFIG_DEVKMEM is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_CS=y
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> # CONFIG_SERIAL_8250_FOURPORT is not set
> # CONFIG_SERIAL_8250_ACCENT is not set
> # CONFIG_SERIAL_8250_BOCA is not set
> # CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
> # CONFIG_SERIAL_8250_HUB6 is not set
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
> 
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_MFD_HSU is not set
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_JSM=y
> # CONFIG_SERIAL_TIMBERDALE is not set
> # CONFIG_SERIAL_ALTERA_JTAGUART is not set
> # CONFIG_SERIAL_ALTERA_UART is not set
> # CONFIG_SERIAL_PCH_UART is not set
> # CONFIG_SERIAL_XILINX_PS_UART is not set
> # CONFIG_PRINTER is not set
> # CONFIG_PPDEV is not set
> CONFIG_HVC_DRIVER=y
> CONFIG_HVC_IRQ=y
> CONFIG_HVC_XEN=y
> CONFIG_VIRTIO_CONSOLE=y
> CONFIG_IPMI_HANDLER=y
> # CONFIG_IPMI_PANIC_EVENT is not set
> CONFIG_IPMI_DEVICE_INTERFACE=y
> CONFIG_IPMI_SI=y
> CONFIG_IPMI_WATCHDOG=y
> CONFIG_IPMI_POWEROFF=y
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_TIMERIOMEM=y
> CONFIG_HW_RANDOM_INTEL=y
> CONFIG_HW_RANDOM_AMD=y
> CONFIG_HW_RANDOM_GEODE=y
> CONFIG_HW_RANDOM_VIA=y
> CONFIG_HW_RANDOM_VIRTIO=y
> CONFIG_NVRAM=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> CONFIG_CARDMAN_4000=y
> CONFIG_CARDMAN_4040=y
> CONFIG_IPWIRELESS=y
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_NSC_GPIO is not set
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=8192
> CONFIG_HPET=y
> # CONFIG_HPET_MMAP is not set
> CONFIG_HANGCHECK_TIMER=y
> CONFIG_TCG_TPM=y
> CONFIG_TCG_TIS=y
> CONFIG_TCG_NSC=y
> CONFIG_TCG_ATMEL=y
> CONFIG_TCG_INFINEON=y
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> # CONFIG_RAMOOPS is not set
> CONFIG_I2C=y
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_COMPAT=y
> CONFIG_I2C_CHARDEV=y
> # CONFIG_I2C_MUX is not set
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_SMBUS=y
> CONFIG_I2C_ALGOBIT=y
> CONFIG_I2C_ALGOPCA=y
> 
> #
> # I2C Hardware Bus support
> #
> 
> #
> # PC SMBus host controller drivers
> #
> CONFIG_I2C_ALI1535=y
> CONFIG_I2C_ALI1563=y
> CONFIG_I2C_ALI15X3=y
> CONFIG_I2C_AMD756=y
> # CONFIG_I2C_AMD756_S4882 is not set
> CONFIG_I2C_AMD8111=y
> CONFIG_I2C_I801=y
> CONFIG_I2C_ISCH=y
> CONFIG_I2C_PIIX4=y
> CONFIG_I2C_NFORCE2=y
> # CONFIG_I2C_NFORCE2_S4985 is not set
> CONFIG_I2C_SIS5595=y
> CONFIG_I2C_SIS630=y
> CONFIG_I2C_SIS96X=y
> CONFIG_I2C_VIA=y
> CONFIG_I2C_VIAPRO=y
> 
> #
> # ACPI drivers
> #
> # CONFIG_I2C_SCMI is not set
> 
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_GPIO is not set
> # CONFIG_I2C_INTEL_MID is not set
> # CONFIG_I2C_OCORES is not set
> CONFIG_I2C_PCA_PLATFORM=y
> # CONFIG_I2C_PXA_PCI is not set
> CONFIG_I2C_SIMTEC=y
> # CONFIG_I2C_XILINX is not set
> # CONFIG_I2C_EG20T is not set
> 
> #
> # External I2C/SMBus adapter drivers
> #
> # CONFIG_I2C_DIOLAN_U2C is not set
> CONFIG_I2C_PARPORT=y
> CONFIG_I2C_PARPORT_LIGHT=y
> # CONFIG_I2C_TAOS_EVM is not set
> CONFIG_I2C_TINY_USB=y
> 
> #
> # Other I2C/SMBus bus drivers
> #
> CONFIG_I2C_PCA_ISA=y
> # CONFIG_I2C_STUB is not set
> # CONFIG_SCx200_ACB is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_SPI is not set
> 
> #
> # PPS support
> #
> # CONFIG_PPS is not set
> 
> #
> # PPS generators support
> #
> 
> #
> # PTP clock support
> #
> 
> #
> # Enable Device Drivers -> PPS to see the PTP clock options.
> #
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> CONFIG_GPIOLIB=y
> # CONFIG_GPIO_SYSFS is not set
> 
> #
> # Memory mapped GPIO drivers:
> #
> # CONFIG_GPIO_BASIC_MMIO is not set
> # CONFIG_GPIO_IT8761E is not set
> # CONFIG_GPIO_SCH is not set
> # CONFIG_GPIO_VX855 is not set
> 
> #
> # I2C GPIO expanders:
> #
> # CONFIG_GPIO_MAX7300 is not set
> # CONFIG_GPIO_MAX732X is not set
> # CONFIG_GPIO_PCA953X is not set
> # CONFIG_GPIO_PCF857X is not set
> # CONFIG_GPIO_SX150X is not set
> # CONFIG_GPIO_ADP5588 is not set
> 
> #
> # PCI GPIO expanders:
> #
> # CONFIG_GPIO_BT8XX is not set
> # CONFIG_GPIO_LANGWELL is not set
> # CONFIG_GPIO_PCH is not set
> # CONFIG_GPIO_ML_IOH is not set
> # CONFIG_GPIO_RDC321X is not set
> 
> #
> # SPI GPIO expanders:
> #
> 
> #
> # AC97 GPIO expanders:
> #
> 
> #
> # MODULbus GPIO expanders:
> #
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_TEST_POWER is not set
> # CONFIG_BATTERY_DS2780 is not set
> # CONFIG_BATTERY_DS2782 is not set
> # CONFIG_BATTERY_BQ20Z75 is not set
> CONFIG_BATTERY_BQ27x00=y
> CONFIG_BATTERY_BQ27X00_I2C=y
> CONFIG_BATTERY_BQ27X00_PLATFORM=y
> # CONFIG_BATTERY_MAX17040 is not set
> # CONFIG_BATTERY_MAX17042 is not set
> # CONFIG_CHARGER_ISP1704 is not set
> # CONFIG_CHARGER_MAX8903 is not set
> # CONFIG_CHARGER_GPIO is not set
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=y
> # CONFIG_HWMON_DEBUG_CHIP is not set
> 
> #
> # Native drivers
> #
> CONFIG_SENSORS_ABITUGURU=y
> CONFIG_SENSORS_ABITUGURU3=y
> CONFIG_SENSORS_AD7414=y
> CONFIG_SENSORS_AD7418=y
> CONFIG_SENSORS_ADM1021=y
> CONFIG_SENSORS_ADM1025=y
> CONFIG_SENSORS_ADM1026=y
> CONFIG_SENSORS_ADM1029=y
> CONFIG_SENSORS_ADM1031=y
> CONFIG_SENSORS_ADM9240=y
> CONFIG_SENSORS_ADT7411=y
> CONFIG_SENSORS_ADT7462=y
> CONFIG_SENSORS_ADT7470=y
> CONFIG_SENSORS_ADT7475=y
> CONFIG_SENSORS_ASC7621=y
> CONFIG_SENSORS_K8TEMP=y
> CONFIG_SENSORS_K10TEMP=y
> CONFIG_SENSORS_FAM15H_POWER=y
> CONFIG_SENSORS_ASB100=y
> CONFIG_SENSORS_ATXP1=y
> CONFIG_SENSORS_DS620=y
> CONFIG_SENSORS_DS1621=y
> CONFIG_SENSORS_I5K_AMB=y
> CONFIG_SENSORS_F71805F=y
> CONFIG_SENSORS_F71882FG=y
> CONFIG_SENSORS_F75375S=y
> CONFIG_SENSORS_FSCHMD=y
> CONFIG_SENSORS_G760A=y
> CONFIG_SENSORS_GL518SM=y
> CONFIG_SENSORS_GL520SM=y
> CONFIG_SENSORS_GPIO_FAN=y
> CONFIG_SENSORS_CORETEMP=y
> CONFIG_SENSORS_IBMAEM=y
> CONFIG_SENSORS_IBMPEX=y
> CONFIG_SENSORS_IT87=y
> CONFIG_SENSORS_JC42=y
> CONFIG_SENSORS_LINEAGE=y
> CONFIG_SENSORS_LM63=y
> CONFIG_SENSORS_LM73=y
> CONFIG_SENSORS_LM75=y
> CONFIG_SENSORS_LM77=y
> CONFIG_SENSORS_LM78=y
> CONFIG_SENSORS_LM80=y
> CONFIG_SENSORS_LM83=y
> CONFIG_SENSORS_LM85=y
> CONFIG_SENSORS_LM87=y
> CONFIG_SENSORS_LM90=y
> CONFIG_SENSORS_LM92=y
> CONFIG_SENSORS_LM93=y
> CONFIG_SENSORS_LTC4151=y
> CONFIG_SENSORS_LTC4215=y
> CONFIG_SENSORS_LTC4245=y
> CONFIG_SENSORS_LTC4261=y
> CONFIG_SENSORS_LM95241=y
> CONFIG_SENSORS_MAX16065=y
> CONFIG_SENSORS_MAX1619=y
> CONFIG_SENSORS_MAX6639=y
> CONFIG_SENSORS_MAX6642=y
> CONFIG_SENSORS_MAX6650=y
> CONFIG_SENSORS_PC87360=y
> CONFIG_SENSORS_PC87427=y
> CONFIG_SENSORS_PCF8591=y
> CONFIG_PMBUS=y
> CONFIG_SENSORS_PMBUS=y
> CONFIG_SENSORS_ADM1275=y
> CONFIG_SENSORS_MAX16064=y
> CONFIG_SENSORS_MAX34440=y
> CONFIG_SENSORS_MAX8688=y
> CONFIG_SENSORS_UCD9000=y
> CONFIG_SENSORS_UCD9200=y
> CONFIG_SENSORS_SHT15=y
> CONFIG_SENSORS_SHT21=y
> CONFIG_SENSORS_SIS5595=y
> CONFIG_SENSORS_SMM665=y
> CONFIG_SENSORS_DME1737=y
> CONFIG_SENSORS_EMC1403=y
> CONFIG_SENSORS_EMC2103=y
> CONFIG_SENSORS_EMC6W201=y
> CONFIG_SENSORS_SMSC47M1=y
> CONFIG_SENSORS_SMSC47M192=y
> CONFIG_SENSORS_SMSC47B397=y
> CONFIG_SENSORS_SCH5627=y
> CONFIG_SENSORS_ADS1015=y
> CONFIG_SENSORS_ADS7828=y
> CONFIG_SENSORS_AMC6821=y
> CONFIG_SENSORS_THMC50=y
> CONFIG_SENSORS_TMP102=y
> CONFIG_SENSORS_TMP401=y
> CONFIG_SENSORS_TMP421=y
> CONFIG_SENSORS_VIA_CPUTEMP=y
> CONFIG_SENSORS_VIA686A=y
> CONFIG_SENSORS_VT1211=y
> CONFIG_SENSORS_VT8231=y
> CONFIG_SENSORS_W83781D=y
> CONFIG_SENSORS_W83791D=y
> CONFIG_SENSORS_W83792D=y
> CONFIG_SENSORS_W83793=y
> CONFIG_SENSORS_W83795=y
> # CONFIG_SENSORS_W83795_FANCTRL is not set
> CONFIG_SENSORS_W83L785TS=y
> CONFIG_SENSORS_W83L786NG=y
> CONFIG_SENSORS_W83627HF=y
> CONFIG_SENSORS_W83627EHF=y
> CONFIG_SENSORS_APPLESMC=y
> 
> #
> # ACPI drivers
> #
> CONFIG_SENSORS_ACPI_POWER=y
> CONFIG_SENSORS_ATK0110=y
> CONFIG_THERMAL=y
> CONFIG_THERMAL_HWMON=y
> # CONFIG_WATCHDOG is not set
> CONFIG_SSB_POSSIBLE=y
> 
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB=y
> CONFIG_SSB_SPROM=y
> CONFIG_SSB_PCIHOST_POSSIBLE=y
> CONFIG_SSB_PCIHOST=y
> # CONFIG_SSB_B43_PCI_BRIDGE is not set
> CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
> # CONFIG_SSB_PCMCIAHOST is not set
> # CONFIG_SSB_DEBUG is not set
> CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> CONFIG_SSB_DRIVER_PCICORE=y
> CONFIG_BCMA_POSSIBLE=y
> 
> #
> # Broadcom specific AMBA
> #
> # CONFIG_BCMA is not set
> CONFIG_MFD_SUPPORT=y
> CONFIG_MFD_CORE=y
> # CONFIG_MFD_88PM860X is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_HTC_I2CPLD is not set
> # CONFIG_TPS6105X is not set
> # CONFIG_TPS65010 is not set
> # CONFIG_TPS6507X is not set
> # CONFIG_MFD_TPS6586X is not set
> # CONFIG_TWL4030_CORE is not set
> # CONFIG_MFD_STMPE is not set
> # CONFIG_MFD_TC3589X is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_PMIC_DA903X is not set
> # CONFIG_PMIC_ADP5520 is not set
> # CONFIG_MFD_MAX8925 is not set
> # CONFIG_MFD_MAX8997 is not set
> # CONFIG_MFD_MAX8998 is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM831X_I2C is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_WM8994 is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_ABX500_CORE is not set
> # CONFIG_MFD_CS5535 is not set
> # CONFIG_MFD_TIMBERDALE is not set
> CONFIG_LPC_SCH=y
> # CONFIG_MFD_RDC321X is not set
> # CONFIG_MFD_JANZ_CMODIO is not set
> # CONFIG_MFD_VX855 is not set
> # CONFIG_MFD_WL1273_CORE is not set
> # CONFIG_MFD_TPS65910 is not set
> # CONFIG_REGULATOR is not set
> # CONFIG_MEDIA_SUPPORT is not set
> 
> #
> # Graphics support
> #
> # CONFIG_AGP is not set
> CONFIG_VGA_ARB=y
> CONFIG_VGA_ARB_MAX_GPUS=16
> # CONFIG_VGA_SWITCHEROO is not set
> # CONFIG_DRM is not set
> # CONFIG_STUB_POULSBO is not set
> # CONFIG_VGASTATE is not set
> CONFIG_VIDEO_OUTPUT_CONTROL=y
> # CONFIG_FB is not set
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> 
> #
> # Display device support
> #
> CONFIG_DISPLAY_SUPPORT=y
> 
> #
> # Display hardware drivers
> #
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FONT_8x16=y
> # CONFIG_SOUND is not set
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> # CONFIG_HIDRAW is not set
> 
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> # CONFIG_HID_PID is not set
> # CONFIG_USB_HIDDEV is not set
> 
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=y
> # CONFIG_HID_ACRUX is not set
> CONFIG_HID_APPLE=y
> CONFIG_HID_BELKIN=y
> CONFIG_HID_CHERRY=y
> CONFIG_HID_CHICONY=y
> CONFIG_HID_CYPRESS=y
> # CONFIG_HID_DRAGONRISE is not set
> # CONFIG_HID_EMS_FF is not set
> CONFIG_HID_EZKEY=y
> # CONFIG_HID_KEYTOUCH is not set
> CONFIG_HID_KYE=y
> # CONFIG_HID_UCLOGIC is not set
> # CONFIG_HID_WALTOP is not set
> # CONFIG_HID_GYRATION is not set
> # CONFIG_HID_TWINHAN is not set
> CONFIG_HID_KENSINGTON=y
> # CONFIG_HID_LCPOWER is not set
> CONFIG_HID_LOGITECH=y
> # CONFIG_LOGITECH_FF is not set
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> # CONFIG_LOGIG940_FF is not set
> # CONFIG_LOGIWII_FF is not set
> CONFIG_HID_MICROSOFT=y
> CONFIG_HID_MONTEREY=y
> # CONFIG_HID_MULTITOUCH is not set
> # CONFIG_HID_NTRIG is not set
> # CONFIG_HID_ORTEK is not set
> # CONFIG_HID_PANTHERLORD is not set
> # CONFIG_HID_PETALYNX is not set
> # CONFIG_HID_PICOLCD is not set
> # CONFIG_HID_QUANTA is not set
> # CONFIG_HID_ROCCAT is not set
> # CONFIG_HID_ROCCAT_ARVO is not set
> # CONFIG_HID_ROCCAT_KONE is not set
> # CONFIG_HID_ROCCAT_KONEPLUS is not set
> # CONFIG_HID_ROCCAT_KOVAPLUS is not set
> # CONFIG_HID_ROCCAT_PYRA is not set
> # CONFIG_HID_SAMSUNG is not set
> # CONFIG_HID_SONY is not set
> # CONFIG_HID_SUNPLUS is not set
> # CONFIG_HID_GREENASIA is not set
> # CONFIG_HID_SMARTJOYPLUS is not set
> # CONFIG_HID_TOPSEED is not set
> # CONFIG_HID_THRUSTMASTER is not set
> # CONFIG_HID_ZEROPLUS is not set
> # CONFIG_HID_ZYDACRON is not set
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> 
> #
> # Miscellaneous USB options
> #
> # CONFIG_USB_DEVICEFS is not set
> # CONFIG_USB_DEVICE_CLASS is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_MON=y
> # CONFIG_USB_WUSB is not set
> # CONFIG_USB_WUSB_CBAF is not set
> 
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_XHCI_HCD=y
> # CONFIG_USB_XHCI_HCD_DEBUGGING is not set
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> CONFIG_USB_OXU210HP_HCD=y
> CONFIG_USB_ISP116X_HCD=y
> CONFIG_USB_ISP1760_HCD=y
> CONFIG_USB_ISP1362_HCD=y
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_HCD_SSB is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> CONFIG_USB_SL811_HCD=y
> # CONFIG_USB_SL811_HCD_ISO is not set
> # CONFIG_USB_SL811_CS is not set
> CONFIG_USB_R8A66597_HCD=y
> # CONFIG_USB_WHCI_HCD is not set
> # CONFIG_USB_HWA_HCD is not set
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
> 
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
> 
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_REALTEK=y
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
> CONFIG_USB_STORAGE_ALAUDA=y
> CONFIG_USB_STORAGE_ONETOUCH=y
> CONFIG_USB_STORAGE_KARMA=y
> CONFIG_USB_STORAGE_CYPRESS_ATACB=y
> # CONFIG_USB_STORAGE_ENE_UB6250 is not set
> CONFIG_USB_UAS=y
> # CONFIG_USB_LIBUSUAL is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> # CONFIG_USB_SERIAL is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> CONFIG_USB_SISUSBVGA=y
> CONFIG_USB_SISUSBVGA_CON=y
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_YUREX is not set
> # CONFIG_USB_GADGET is not set
> 
> #
> # OTG and related infrastructure
> #
> CONFIG_USB_OTG_UTILS=y
> # CONFIG_USB_GPIO_VBUS is not set
> CONFIG_NOP_USB_XCEIV=y
> # CONFIG_UWB is not set
> # CONFIG_MMC is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
> 
> #
> # LED drivers
> #
> # CONFIG_LEDS_LM3530 is not set
> # CONFIG_LEDS_ALIX2 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_GPIO is not set
> # CONFIG_LEDS_LP3944 is not set
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_LP5523 is not set
> CONFIG_LEDS_CLEVO_MAIL=y
> # CONFIG_LEDS_PCA955X is not set
> CONFIG_LEDS_BD2802=y
> # CONFIG_LEDS_INTEL_SS4200 is not set
> # CONFIG_LEDS_LT3593 is not set
> CONFIG_LEDS_TRIGGERS=y
> 
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGER_TIMER=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> CONFIG_LEDS_TRIGGER_BACKLIGHT=y
> # CONFIG_LEDS_TRIGGER_GPIO is not set
> CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> 
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_NFC_DEVICES is not set
> # CONFIG_ACCESSIBILITY is not set
> CONFIG_INFINIBAND=y
> CONFIG_INFINIBAND_USER_MAD=y
> CONFIG_INFINIBAND_USER_ACCESS=y
> CONFIG_INFINIBAND_USER_MEM=y
> CONFIG_INFINIBAND_ADDR_TRANS=y
> CONFIG_INFINIBAND_MTHCA=y
> CONFIG_INFINIBAND_MTHCA_DEBUG=y
> CONFIG_INFINIBAND_AMSO1100=y
> # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
> CONFIG_INFINIBAND_CXGB3=y
> # CONFIG_INFINIBAND_CXGB3_DEBUG is not set
> CONFIG_MLX4_INFINIBAND=y
> CONFIG_INFINIBAND_NES=y
> # CONFIG_INFINIBAND_NES_DEBUG is not set
> CONFIG_INFINIBAND_IPOIB=y
> # CONFIG_INFINIBAND_IPOIB_CM is not set
> CONFIG_INFINIBAND_IPOIB_DEBUG=y
> # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
> CONFIG_INFINIBAND_SRP=y
> CONFIG_INFINIBAND_ISER=y
> CONFIG_EDAC=y
> 
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_DECODE_MCE=y
> # CONFIG_EDAC_MCE_INJ is not set
> CONFIG_EDAC_MM_EDAC=y
> CONFIG_EDAC_MCE=y
> CONFIG_EDAC_AMD76X=y
> CONFIG_EDAC_E7XXX=y
> CONFIG_EDAC_E752X=y
> CONFIG_EDAC_I82875P=y
> CONFIG_EDAC_I82975X=y
> CONFIG_EDAC_I3000=y
> # CONFIG_EDAC_I3200 is not set
> CONFIG_EDAC_X38=y
> CONFIG_EDAC_I5400=y
> CONFIG_EDAC_I7CORE=y
> CONFIG_EDAC_I82860=y
> CONFIG_EDAC_R82600=y
> CONFIG_EDAC_I5000=y
> CONFIG_EDAC_I5100=y
> CONFIG_EDAC_I7300=y
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> # CONFIG_RTC_HCTOSYS is not set
> # CONFIG_RTC_DEBUG is not set
> 
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
> 
> #
> # I2C RTC drivers
> #
> CONFIG_RTC_DRV_DS1307=y
> CONFIG_RTC_DRV_DS1374=y
> CONFIG_RTC_DRV_DS1672=y
> CONFIG_RTC_DRV_DS3232=y
> CONFIG_RTC_DRV_MAX6900=y
> CONFIG_RTC_DRV_RS5C372=y
> CONFIG_RTC_DRV_ISL1208=y
> CONFIG_RTC_DRV_ISL12022=y
> CONFIG_RTC_DRV_X1205=y
> CONFIG_RTC_DRV_PCF8563=y
> CONFIG_RTC_DRV_PCF8583=y
> CONFIG_RTC_DRV_M41T80=y
> CONFIG_RTC_DRV_M41T80_WDT=y
> CONFIG_RTC_DRV_BQ32K=y
> CONFIG_RTC_DRV_S35390A=y
> CONFIG_RTC_DRV_FM3130=y
> CONFIG_RTC_DRV_RX8581=y
> CONFIG_RTC_DRV_RX8025=y
> CONFIG_RTC_DRV_EM3027=y
> CONFIG_RTC_DRV_RV3029C2=y
> 
> #
> # SPI RTC drivers
> #
> 
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=y
> CONFIG_RTC_DRV_DS1286=y
> CONFIG_RTC_DRV_DS1511=y
> CONFIG_RTC_DRV_DS1553=y
> CONFIG_RTC_DRV_DS1742=y
> CONFIG_RTC_DRV_STK17TA8=y
> CONFIG_RTC_DRV_M48T86=y
> CONFIG_RTC_DRV_M48T35=y
> CONFIG_RTC_DRV_M48T59=y
> CONFIG_RTC_DRV_MSM6242=y
> CONFIG_RTC_DRV_BQ4802=y
> CONFIG_RTC_DRV_RP5C01=y
> CONFIG_RTC_DRV_V3020=y
> 
> #
> # on-CPU RTC drivers
> #
> CONFIG_DMADEVICES=y
> # CONFIG_DMADEVICES_DEBUG is not set
> 
> #
> # DMA Devices
> #
> CONFIG_INTEL_MID_DMAC=y
> CONFIG_INTEL_IOATDMA=y
> CONFIG_TIMB_DMA=y
> CONFIG_PCH_DMA=y
> CONFIG_DMA_ENGINE=y
> 
> #
> # DMA Clients
> #
> CONFIG_NET_DMA=y
> CONFIG_ASYNC_TX_DMA=y
> # CONFIG_DMATEST is not set
> CONFIG_DCA=y
> CONFIG_AUXDISPLAY=y
> CONFIG_KS0108=y
> CONFIG_KS0108_PORT=0x378
> CONFIG_KS0108_DELAY=2
> CONFIG_UIO=y
> # CONFIG_UIO_CIF is not set
> # CONFIG_UIO_PDRV is not set
> # CONFIG_UIO_PDRV_GENIRQ is not set
> # CONFIG_UIO_AEC is not set
> # CONFIG_UIO_SERCOS3 is not set
> # CONFIG_UIO_PCI_GENERIC is not set
> # CONFIG_UIO_NETX is not set
> 
> #
> # Xen driver support
> #
> CONFIG_XEN_BALLOON=y
> CONFIG_XEN_SCRUB_PAGES=y
> CONFIG_XEN_DEV_EVTCHN=y
> CONFIG_XEN_BACKEND=y
> CONFIG_XENFS=y
> CONFIG_XEN_COMPAT_XENFS=y
> CONFIG_XEN_SYS_HYPERVISOR=y
> CONFIG_XEN_XENBUS_FRONTEND=y
> CONFIG_XEN_GNTDEV=y
> CONFIG_XEN_GRANT_DEV_ALLOC=y
> CONFIG_XEN_PLATFORM_PCI=y
> CONFIG_SWIOTLB_XEN=y
> # CONFIG_STAGING is not set
> # CONFIG_X86_PLATFORM_DEVICES is not set
> CONFIG_CLKSRC_I8253=y
> 
> #
> # Firmware Drivers
> #
> CONFIG_EDD=y
> # CONFIG_EDD_OFF is not set
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_EFI_VARS=y
> CONFIG_DELL_RBU=y
> CONFIG_DCDBAS=y
> CONFIG_DMIID=y
> # CONFIG_DMI_SYSFS is not set
> CONFIG_ISCSI_IBFT_FIND=y
> CONFIG_ISCSI_IBFT=y
> # CONFIG_SIGMA is not set
> # CONFIG_GOOGLE_FIRMWARE is not set
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> CONFIG_EXT4_FS=y
> CONFIG_EXT4_FS_XATTR=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
> # CONFIG_EXT4_DEBUG is not set
> CONFIG_FS_XIP=y
> CONFIG_JBD=y
> CONFIG_JBD2=y
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> CONFIG_REISERFS_FS_XATTR=y
> CONFIG_REISERFS_FS_POSIX_ACL=y
> CONFIG_REISERFS_FS_SECURITY=y
> # CONFIG_JFS_FS is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_FILE_LOCKING=y
> CONFIG_FSNOTIFY=y
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY_USER=y
> # CONFIG_FANOTIFY is not set
> # CONFIG_QUOTA is not set
> # CONFIG_QUOTACTL is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
> CONFIG_GENERIC_ACL=y
> 
> #
> # Caches
> #
> # CONFIG_FSCACHE is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> # CONFIG_UDF_FS is not set
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_TMPFS_POSIX_ACL=y
> CONFIG_TMPFS_XATTR=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=y
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> # CONFIG_UBIFS_FS is not set
> # CONFIG_LOGFS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_SQUASHFS=y
> CONFIG_SQUASHFS_XATTR=y
> CONFIG_SQUASHFS_LZO=y
> CONFIG_SQUASHFS_XZ=y
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_PSTORE is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_EXOFS_FS is not set
> # CONFIG_NETWORK_FILESYSTEMS is not set
> 
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> CONFIG_AMIGA_PARTITION=y
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> CONFIG_KARMA_PARTITION=y
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=y
> CONFIG_NLS_CODEPAGE_775=y
> CONFIG_NLS_CODEPAGE_850=y
> CONFIG_NLS_CODEPAGE_852=y
> CONFIG_NLS_CODEPAGE_855=y
> CONFIG_NLS_CODEPAGE_857=y
> CONFIG_NLS_CODEPAGE_860=y
> CONFIG_NLS_CODEPAGE_861=y
> CONFIG_NLS_CODEPAGE_862=y
> CONFIG_NLS_CODEPAGE_863=y
> CONFIG_NLS_CODEPAGE_864=y
> CONFIG_NLS_CODEPAGE_865=y
> CONFIG_NLS_CODEPAGE_866=y
> CONFIG_NLS_CODEPAGE_869=y
> CONFIG_NLS_CODEPAGE_936=y
> CONFIG_NLS_CODEPAGE_950=y
> CONFIG_NLS_CODEPAGE_932=y
> CONFIG_NLS_CODEPAGE_949=y
> CONFIG_NLS_CODEPAGE_874=y
> CONFIG_NLS_ISO8859_8=y
> CONFIG_NLS_CODEPAGE_1250=y
> CONFIG_NLS_CODEPAGE_1251=y
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=y
> CONFIG_NLS_ISO8859_3=y
> CONFIG_NLS_ISO8859_4=y
> CONFIG_NLS_ISO8859_5=y
> CONFIG_NLS_ISO8859_6=y
> CONFIG_NLS_ISO8859_7=y
> CONFIG_NLS_ISO8859_9=y
> CONFIG_NLS_ISO8859_13=y
> CONFIG_NLS_ISO8859_14=y
> CONFIG_NLS_ISO8859_15=y
> CONFIG_NLS_KOI8_R=y
> CONFIG_NLS_KOI8_U=y
> CONFIG_NLS_UTF8=y
> CONFIG_DLM=y
> CONFIG_DLM_DEBUG=y
> 
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> CONFIG_PRINTK_TIME=y
> CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
> # CONFIG_ENABLE_WARN_DEPRECATED is not set
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=1024
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_STRIP_ASM_SYMS is not set
> CONFIG_UNUSED_SYMBOLS=y
> # CONFIG_DEBUG_FS is not set
> CONFIG_HEADERS_CHECK=y
> # CONFIG_DEBUG_SECTION_MISMATCH is not set
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_HARDLOCKUP_DETECTOR is not set
> # CONFIG_SLUB_DEBUG_ON is not set
> # CONFIG_SLUB_STATS is not set
> # CONFIG_SPARSE_RCU_POINTER is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> # CONFIG_FRAME_POINTER is not set
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> # CONFIG_SYSCTL_SYSCALL_CHECK is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
> CONFIG_HAVE_C_RECORDMCOUNT=y
> CONFIG_TRACING_SUPPORT=y
> # CONFIG_FTRACE is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
> # CONFIG_BUILD_DOCSRC is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_ATOMIC64_SELFTEST is not set
> # CONFIG_ASYNC_RAID6_TEST is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> CONFIG_HAVE_ARCH_KMEMCHECK=y
> # CONFIG_TEST_KSTRTOX is not set
> CONFIG_STRICT_DEVMEM=y
> # CONFIG_X86_VERBOSE_BOOTUP is not set
> CONFIG_EARLY_PRINTK=y
> CONFIG_EARLY_PRINTK_DBGP=y
> # CONFIG_DEBUG_SET_MODULE_RONX is not set
> CONFIG_DOUBLEFAULT=y
> # CONFIG_IOMMU_STRESS is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> CONFIG_OPTIMIZE_INLINING=y
> 
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY_DMESG_RESTRICT is not set
> # CONFIG_SECURITY is not set
> CONFIG_SECURITYFS=y
> CONFIG_DEFAULT_SECURITY_DAC=y
> CONFIG_DEFAULT_SECURITY=""
> CONFIG_XOR_BLOCKS=y
> CONFIG_ASYNC_CORE=y
> CONFIG_ASYNC_MEMCPY=y
> CONFIG_ASYNC_XOR=y
> CONFIG_ASYNC_PQ=y
> CONFIG_ASYNC_RAID6_RECOV=y
> CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
> CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
> CONFIG_CRYPTO=y
> 
> #
> # Crypto core or helper
> #
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=y
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=y
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=y
> CONFIG_CRYPTO_PCOMP2=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> CONFIG_CRYPTO_GF128MUL=y
> CONFIG_CRYPTO_NULL=y
> # CONFIG_CRYPTO_PCRYPT is not set
> CONFIG_CRYPTO_WORKQUEUE=y
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=y
> # CONFIG_CRYPTO_TEST is not set
> 
> #
> # Authenticated Encryption with Associated Data
> #
> CONFIG_CRYPTO_CCM=y
> CONFIG_CRYPTO_GCM=y
> CONFIG_CRYPTO_SEQIV=y
> 
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=y
> CONFIG_CRYPTO_CTR=y
> CONFIG_CRYPTO_CTS=y
> CONFIG_CRYPTO_ECB=y
> CONFIG_CRYPTO_LRW=y
> CONFIG_CRYPTO_PCBC=y
> CONFIG_CRYPTO_XTS=y
> 
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_XCBC=y
> # CONFIG_CRYPTO_VMAC is not set
> 
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=y
> CONFIG_CRYPTO_CRC32C_INTEL=y
> CONFIG_CRYPTO_GHASH=y
> CONFIG_CRYPTO_MD4=y
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_MICHAEL_MIC=y
> CONFIG_CRYPTO_RMD128=y
> CONFIG_CRYPTO_RMD160=y
> CONFIG_CRYPTO_RMD256=y
> CONFIG_CRYPTO_RMD320=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_TGR192=y
> CONFIG_CRYPTO_WP512=y
> 
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_586=y
> # CONFIG_CRYPTO_AES_NI_INTEL is not set
> CONFIG_CRYPTO_ANUBIS=y
> CONFIG_CRYPTO_ARC4=y
> CONFIG_CRYPTO_BLOWFISH=y
> CONFIG_CRYPTO_CAMELLIA=y
> CONFIG_CRYPTO_CAST5=y
> CONFIG_CRYPTO_CAST6=y
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_FCRYPT=y
> CONFIG_CRYPTO_KHAZAD=y
> CONFIG_CRYPTO_SALSA20=y
> CONFIG_CRYPTO_SALSA20_586=y
> CONFIG_CRYPTO_SEED=y
> CONFIG_CRYPTO_SERPENT=y
> CONFIG_CRYPTO_TEA=y
> CONFIG_CRYPTO_TWOFISH=y
> CONFIG_CRYPTO_TWOFISH_COMMON=y
> CONFIG_CRYPTO_TWOFISH_586=y
> 
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=y
> CONFIG_CRYPTO_ZLIB=y
> CONFIG_CRYPTO_LZO=y
> 
> #
> # Random Number Generation
> #
> CONFIG_CRYPTO_ANSI_CPRNG=y
> # CONFIG_CRYPTO_USER_API_HASH is not set
> # CONFIG_CRYPTO_USER_API_SKCIPHER is not set
> CONFIG_CRYPTO_HW=y
> CONFIG_CRYPTO_DEV_PADLOCK=y
> CONFIG_CRYPTO_DEV_PADLOCK_AES=y
> CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
> CONFIG_CRYPTO_DEV_GEODE=y
> CONFIG_CRYPTO_DEV_HIFN_795X=y
> CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
> CONFIG_HAVE_KVM=y
> CONFIG_VIRTUALIZATION=y
> # CONFIG_KVM is not set
> CONFIG_VHOST_NET=y
> # CONFIG_LGUEST is not set
> CONFIG_VIRTIO=y
> CONFIG_VIRTIO_RING=y
> CONFIG_VIRTIO_PCI=y
> CONFIG_VIRTIO_BALLOON=y
> # CONFIG_BINARY_PRINTF is not set
> 
> #
> # Library routines
> #
> CONFIG_RAID6_PQ=y
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_CRC_CCITT=y
> CONFIG_CRC16=y
> CONFIG_CRC_T10DIF=y
> CONFIG_CRC_ITU_T=y
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> CONFIG_AUDIT_GENERIC=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_LZO_COMPRESS=y
> CONFIG_LZO_DECOMPRESS=y
> CONFIG_XZ_DEC=y
> CONFIG_XZ_DEC_X86=y
> CONFIG_XZ_DEC_POWERPC=y
> CONFIG_XZ_DEC_IA64=y
> CONFIG_XZ_DEC_ARM=y
> CONFIG_XZ_DEC_ARMTHUMB=y
> CONFIG_XZ_DEC_SPARC=y
> CONFIG_XZ_DEC_BCJ=y
> # CONFIG_XZ_DEC_TEST is not set
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_DECOMPRESS_XZ=y
> CONFIG_DECOMPRESS_LZO=y
> CONFIG_GENERIC_ALLOCATOR=y
> CONFIG_REED_SOLOMON=y
> CONFIG_REED_SOLOMON_DEC16=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=y
> CONFIG_TEXTSEARCH_BM=y
> CONFIG_TEXTSEARCH_FSM=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_CHECK_SIGNATURE=y
> CONFIG_CPU_RMAP=y
> CONFIG_NLATTR=y
> CONFIG_AVERAGE=y
> 00:00.0 0500: 10de:03e2 (rev a1)
> 00:01.0 0601: 10de:03e1 (rev a2)
> 00:01.1 0c05: 10de:03eb (rev a2)
> 00:01.2 0500: 10de:03f5 (rev a2)
> 00:02.0 0c03: 10de:03f1 (rev a3)
> 00:02.1 0c03: 10de:03f2 (rev a3)
> 00:04.0 0604: 10de:03f3 (rev a1)
> 00:05.0 0403: 10de:03f0 (rev a2)
> 00:06.0 0101: 10de:03ec (rev a2)
> 00:07.0 0680: 10de:03ef (rev a2)
> 00:08.0 0101: 10de:03f6 (rev a2)
> 00:08.1 0101: 10de:03f6 (rev a2)
> 00:09.0 0604: 10de:03e8 (rev a2)
> 00:0b.0 0604: 10de:03e9 (rev a2)
> 00:0c.0 0604: 10de:03e9 (rev a2)
> 00:0d.0 0300: 10de:03d6 (rev a2)
> 00:18.0 0600: 1022:1200
> 00:18.1 0600: 1022:1201
> 00:18.2 0600: 1022:1202
> 00:18.3 0600: 1022:1203
> 00:18.4 0600: 1022:1204
> 00:00.0 0600: 1002:7910
> 00:01.0 0604: 1002:7912
> 00:12.0 0106: 1002:4380
> 00:13.0 0c03: 1002:4387
> 00:13.1 0c03: 1002:4388
> 00:13.2 0c03: 1002:4389
> 00:13.3 0c03: 1002:438a
> 00:13.4 0c03: 1002:438b
> 00:13.5 0c03: 1002:4386
> 00:14.0 0c05: 1002:4385 (rev 14)
> 00:14.1 0101: 1002:438c
> 00:14.2 0403: 1002:4383
> 00:14.3 0601: 1002:438d
> 00:14.4 0604: 1002:4384
> 00:18.0 0600: 1022:1100
> 00:18.1 0600: 1022:1101
> 00:18.2 0600: 1022:1102
> 00:18.3 0600: 1022:1103
> 01:05.0 0300: 1002:791e
> 02:0f.0 0200: 10ec:8167 (rev 10)

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Anthony Wright

2011-Jul-29 19:24 UTC

head link

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

On 20/06/2011 13:39, Konrad Rzeszutek Wilk wrote:> On Fri, Jun 17, 2011 at 10:45:41AM +0100, Anthony Wright wrote:
>> On 16/06/2011 21:10, Konrad Rzeszutek Wilk wrote:
>>> So a couple of things popped at when looking at this:
>>> a). "sata_nv 0000:00:08.1: BMDMA: failed to set dma mask,
falling back to PIO"
>>>
>>> That is not good. Somehow it wasn''t able to set a 32-bit
mask. Don''t know
>>> if that is due to the driver or just that the kernel can''t
do it (b/c it
>>> was compiled with some special options).
>> I never saw anything in dmesg or any other logs.
> Uh, I copied that from your logs.
>
>>> b). Are you using some special .config option? If you were to use a
normal
>>>  distro would you see this?
>> My config is attached.
> Great.
>>> c). You are using a 32-bit dom0. Didn''t notice it until
now so I wonder
>>>   if there are some lingering issues (for example not flushing the
highmemory
>>>   mappings) that are at foot. Had you tried a 64-bit kernel before?
>> I haven''t tried 64 bit because I need a 32 bit kernel.
>>> d). Does the problem exist if you try it with a 2.6.39 kernel or
the 3.0-rc3?
>> It happens on every kernel I''ve tried which is 2.6.39,
2.6.39.x & 3.0-rc3
>>> e). Can you run lspci -n ? There is a pretty big file in
drivers/usb/host/pci-quirks.c
>>>   Want to check against your machine.
>> I have the problem on two machines and have attached the lspci -n for
>> both of them.
> Is it possible for you provide this binary blob/USB disk somewhere so I can
> test it on my hardware?
>Just to let the list know, that after a lot of work by konrad we
discovered that the problem while present in 3.0-rc3 was no longer
present in the final 3.0 release of linux. We never quite understood the
cause and I was the only person who could reproduce it reliably, but
since it''s now fixed we''re regarding the issue as closed.

thanks,

Anthony.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Xen devel - May 2011 - USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

[Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

RE: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

RE: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

RE: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7

Re: [Xen-devel] USB disk corruption on Xen 4.1.0 & Linux 2.6.38.7