On Wed, Dec 08, 2010 at 10:50:52PM +0000, M A Young
wrote:> Actually, I might have sent the wrong log files in my earlier post.
>
> Here are the kernel dmesg output and debugkeys output from a nomsi boot.
Can you send me the lspci -vvv and lspci - n try this patch below with MSI
enabled.
The only thing it does it reverse the order of IRQ being initialized
from the high to low.. which should _not_ be a problem unless the AHCI
driver has some issues with a high number.
commit be72548ffe8618c3141c050400306b93f40a107a
Author: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Tue Dec 14 11:43:40 2010 -0500
Revert "xen: Find an unbound irq number in reverse order (high to
low)."
This reverts commit 482839e7b96098f678d0404ec4dd321419ab3ea7.
Conflicts:
drivers/xen/events.c
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 0380664..8889e7f 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -401,11 +401,9 @@ static int find_unbound_irq(void)
struct irq_desc *desc;
int start = get_nr_hw_irqs();
- if (start == nr_irqs)
- goto no_irqs;
/* nr_irqs is a magic value. Must not use it.*/
- for (irq = nr_irqs-1; irq > start; irq--) {
+ for (irq = start; irq < nr_irqs; irq++) {
desc = irq_to_desc(irq);
/* only 0->15 have init''d desc; handle irq > 16 */
if (desc == NULL)
@@ -414,11 +412,8 @@ static int find_unbound_irq(void)
break;
if (desc->chip != &xen_dynamic_chip)
continue;
- if (irq_info[irq].type == IRQT_UNBOUND)
- break;
}
-
- if (irq == start)
+ if (irq == nr_irqs)
goto no_irqs;
desc = irq_to_desc_alloc_node(irq, -1);>
> Michael Young
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64
(mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.5.1 20101130 (Red Hat
4.5.1-6) (GCC) ) #1 SMP Thu Dec 2 16:56:26 UTC 2010
> [ 0.000000] Command line: ro
root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi
> [ 0.000000] xen_release_chunk: looking at area pfn e0000-f423c: 82492
pages freed
> [ 0.000000] released 82492 pages of unused memory
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
> [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
> [ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable)
> [ 0.000000] Xen: 00000000df66d800 - 00000000e0000000 (reserved)
> [ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved)
> [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] Xen: 00000000fed18000 - 00000000fed1c000 (reserved)
> [ 0.000000] Xen: 00000000fed20000 - 00000000fed90000 (reserved)
> [ 0.000000] Xen: 00000000feda0000 - 00000000feda6000 (reserved)
> [ 0.000000] Xen: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
> [ 0.000000] Xen: 0000000100000000 - 000000013423c000 (usable)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] DMI: 0U990C/Inspiron 1525 , BIOS A17
10/27/2009
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
> [ 0.000000] No AGP bridge found
> [ 0.000000] last_pfn = 0x13423c max_arch_pfn = 0x400000000
> [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000
> [ 0.000000] initial memory mapped : 0 - 05fff000
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000df66d000
> [ 0.000000] 0000000000 - 00df66d000 page 4k
> [ 0.000000] kernel direct mapping tables up to df66d000 @
58fe000-5fff000
> [ 0.000000] init_memory_mapping: 0000000100000000-000000013423c000
> [ 0.000000] 0100000000 - 013423c000 page 4k
> [ 0.000000] kernel direct mapping tables up to 13423c000 @
decc5000-df66d000
> [ 0.000000] RAMDISK: 02ac8000 - 04ea2000
> [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08
27D90A1B ASL 00000061)
> [ 0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08
27D90A1B ASL 00000061)
> [ 0.000000] ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx
00001001 INTL 20050624)
> [ 0.000000] ACPI: FACS 00000000df67e000 00040
> [ 0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL M08
00000001 ASL 00000061)
> [ 0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL M08
27D90A1B ASL 00000047)
> [ 0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08
27D90A1B ASL 00000061)
> [ 0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08
27D90A1B ASL 00000061)
> [ 0.000000] ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08
27D90A1B ASL 00000061)
> [ 0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08
27D90A1B ASL 00000061)
> [ 0.000000] ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm
00003000 INTL 20050624)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-000000013423c000
> [ 0.000000] Initmem setup node 0 0000000000000000-000000013423c000
> [ 0.000000] NODE_DATA [00000000df658800 - 00000000df66d7ff]
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x0013423c
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x000df66d
> [ 0.000000] 0: 0x00100000 -> 0x0013423c
> [ 0.000000] On node 0 totalpages: 1128504
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 6 pages reserved
> [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 14280 pages used for memmap
> [ 0.000000] DMA32 zone: 896677 pages, LIFO batch:31
> [ 0.000000] Normal zone: 2920 pages used for memmap
> [ 0.000000] Normal zone: 210644 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10.
(tell your hw vendor)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI
0-255
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 272
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000df66d000 -
00000000df66e000
> [ 0.000000] PM: Registered nosave memory: 00000000df66e000 -
00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f8000000
> [ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
> [ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec10000
> [ 0.000000] PM: Registered nosave memory: 00000000fec10000 -
00000000fed18000
> [ 0.000000] PM: Registered nosave memory: 00000000fed18000 -
00000000fed1c000
> [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed20000
> [ 0.000000] PM: Registered nosave memory: 00000000fed20000 -
00000000fed90000
> [ 0.000000] PM: Registered nosave memory: 00000000fed90000 -
00000000feda0000
> [ 0.000000] PM: Registered nosave memory: 00000000feda0000 -
00000000feda6000
> [ 0.000000] PM: Registered nosave memory: 00000000feda6000 -
00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee10000
> [ 0.000000] PM: Registered nosave memory: 00000000fee10000 -
00000000ffe00000
> [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 -
0000000100000000
> [ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:18000000)
> [ 0.000000] Booting paravirtualized kernel on Xen
> [ 0.000000] Xen version: 4.0.1 (preserve-AD)
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2
nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800dee7d000 s1920512
r8192 d20992 u1949696
> [ 0.000000] pcpu-alloc: s1920512 r8192 d20992 u1949696 alloc=476*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1111242
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: ro
root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Placing 64MB software IO TLB between ffff8800d6200000 -
ffff8800da200000
> [ 0.000000] software IO TLB at phys 0xd6200000 - 0xda200000
> [ 0.000000] Memory: 3446248k/5048560k available (4849k kernel code,
534544k absent, 1067768k reserved, 6795k data, 2744k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU lockdep checking is enabled.
> [ 0.000000] RCU-based detection of stalled CPUs is disabled.
> [ 0.000000] NR_IRQS:33024 nr_irqs:512 16
> [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0
> [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
> [ 0.000000] xen: --> irq=9
> [ 0.000000] xen: acpi sci 9
> [ 0.000000] xen: --> irq=1
> [ 0.000000] xen: --> irq=2
> [ 0.000000] xen: --> irq=3
> [ 0.000000] xen: --> irq=4
> [ 0.000000] xen: --> irq=5
> [ 0.000000] xen: --> irq=6
> [ 0.000000] xen: --> irq=7
> [ 0.000000] xen: --> irq=8
> [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
> [ 0.000000] xen: --> irq=9
> [ 0.000000] xen: --> irq=10
> [ 0.000000] xen: --> irq=11
> [ 0.000000] xen: --> irq=12
> [ 0.000000] xen: --> irq=13
> [ 0.000000] xen: --> irq=14
> [ 0.000000] xen: --> irq=15
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> [ 0.000000] ... CLASSHASH_SIZE: 4096
> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
> [ 0.000000] ... CHAINHASH_SIZE: 16384
> [ 0.000000] memory used by lock dependency info: 6367 kB
> [ 0.000000] per task-struct memory footprint: 2688 bytes
> [ 0.000000] allocated 45875200 bytes of page_cgroup
> [ 0.000000] please try ''cgroup_disable=memory'' option
if you don''t want memory cgroups
> [ 0.000000] ODEBUG: 11 of 11 active objects replaced
> [ 0.000000] Xen: using vcpuop timer interface
> [ 0.000000] installing Xen timer for CPU 0
> [ 0.000000] Detected 2394.062 MHz processor.
> [ 0.000999] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4788.12 BogoMIPS (lpj=2394062)
> [ 0.000999] pid_max: default: 32768 minimum: 301
> [ 0.000999] Security Framework initialized
> [ 0.000999] SELinux: Initializing.
> [ 0.000999] SELinux: Starting in permissive mode
> [ 0.003293] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
> [ 0.008310] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> [ 0.010522] Mount-cache hash table entries: 256
> [ 0.012437] Initializing cgroup subsys ns
> [ 0.012457] ns_cgroup deprecated: consider using the
''clone_children'' flag without the ns_cgroup.
> [ 0.012469] Initializing cgroup subsys cpuacct
> [ 0.012501] Initializing cgroup subsys memory
> [ 0.012651] Initializing cgroup subsys devices
> [ 0.012661] Initializing cgroup subsys freezer
> [ 0.012669] Initializing cgroup subsys net_cls
> [ 0.012677] Initializing cgroup subsys blkio
> [ 0.012944] CPU: Physical Processor ID: 0
> [ 0.012950] CPU: Processor Core ID: 0
> [ 0.012958] Performance Events: unsupported p6 CPU model 23 no PMU
driver, software events only.
> [ 0.013701] ACPI: Core revision 20101013
> [ 0.040046] ftrace: allocating 24696 entries in 97 pages
> [ 0.045474] NMI watchdog failed to create perf event on cpu0:
fffffffffffffffe
> [ 0.046200] installing Xen timer for CPU 1
> [ 0.046316] lockdep: fixing up alternatives.
> [ 0.046692] NMI watchdog failed to create perf event on cpu1:
fffffffffffffffe
> [ 0.046703] Brought up 2 CPUs
> [ 0.046707] sizeof(vma)=184 bytes
> [ 0.046710] sizeof(page)=56 bytes
> [ 0.046712] sizeof(inode)=1088 bytes
> [ 0.046715] sizeof(dentry)=264 bytes
> [ 0.046717] sizeof(ext3inode)=1552 bytes
> [ 0.046719] sizeof(ext4inode)=1912 bytes
> [ 0.046722] sizeof(buffer_head)=104 bytes
> [ 0.046724] sizeof(skbuff)=240 bytes
> [ 0.046726] sizeof(task_struct)=9104 bytes
> [ 0.047720] devtmpfs: initialized
> [ 0.057506] atomic64 test passed for x86-64 platform with CX8 and with
SSE
> [ 0.057541] Grant table initialized
> [ 0.057590] Time: 20:38:44 Date: 12/03/10
> [ 0.057999] NET: Registered protocol family 16
> [ 0.060248] ACPI: bus type pci registered
> [ 0.060864] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
> [ 0.060875] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
E820
> [ 0.079750] PCI: Using configuration type 1 for base access
> [ 0.091103] bio: create slab <bio-0> at 0
> [ 0.094391] ACPI: EC: Look up EC in DSDT
> [ 0.115142] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
> [ 0.115999] ACPI: Dynamic OEM Table Load:
> [ 0.115999] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
> [ 0.116306] ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
> [ 0.116999] ACPI: Dynamic OEM Table Load:
> [ 0.116999] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
> [ 0.117113] ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist
00003000 INTL 20050624)
> [ 0.117999] ACPI: Dynamic OEM Table Load:
> [ 0.117999] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist
00003000 INTL 20050624)
> [ 0.118068] ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst
00003000 INTL 20050624)
> [ 0.118999] ACPI: Dynamic OEM Table Load:
> [ 0.118999] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst
00003000 INTL 20050624)
> [ 0.118999] ACPI: Interpreter enabled
> [ 0.118999] ACPI: (supports S0 S3 S4 S5)
> [ 0.118999] ACPI: Using IOAPIC for interrupt routing
> [ 0.252999] ACPI: No dock devices found.
> [ 0.252999] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
> [ 0.279999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0x000d0000-0x000dffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xe0000000-0xf7ffffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xfc000000-0xfebfffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xfec10000-0xfecfffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xfed1c000-0xfed1ffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xfed90000-0xfed9ffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xfeda7000-0xfedfffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xfee10000-0xff9fffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0xffc00000-0xffdfffff]
> [ 0.329999] pci_root PNP0A03:00: host bridge window [mem
0x120000000-0x317ffffff]
> [ 0.329999] pci_root PNP0A03:00: address space collision: host bridge
window [mem 0x120000000-0x317ffffff] conflicts with System RAM [mem
0x100000000-0x13423bfff]
> [ 0.329999] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
> [ 0.330103] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
> [ 0.330185] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit]
> [ 0.330233] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit
pref]
> [ 0.330265] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff]
> [ 0.330490] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
> [ 0.330559] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit]
> [ 0.330999] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
> [ 0.330999] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
> [ 0.331056] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
> [ 0.331247] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
> [ 0.331458] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
> [ 0.331536] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
> [ 0.331855] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.331869] pci 0000:00:1a.7: PME# disabled
> [ 0.331972] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
> [ 0.331999] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
> [ 0.332030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.332043] pci 0000:00:1b.0: PME# disabled
> [ 0.332146] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
> [ 0.332453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.332466] pci 0000:00:1c.0: PME# disabled
> [ 0.332578] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
> [ 0.332883] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.332896] pci 0000:00:1c.1: PME# disabled
> [ 0.332999] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
> [ 0.333059] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.333073] pci 0000:00:1c.4: PME# disabled
> [ 0.333207] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
> [ 0.333400] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
> [ 0.333555] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
> [ 0.333746] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
> [ 0.333900] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
> [ 0.333999] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
> [ 0.334105] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
> [ 0.334184] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
> [ 0.334501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.334515] pci 0000:00:1d.7: PME# disabled
> [ 0.334597] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
> [ 0.334903] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
> [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6
ACPI/GPIO/TCO
> [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6
GPIO
> [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900
(mask 007f)
> [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c
(mask 0007)
> [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80
(mask 003f)
> [ 0.335089] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
> [ 0.335143] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
> [ 0.335180] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
> [ 0.335218] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
> [ 0.335256] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
> [ 0.335293] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
> [ 0.335507] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
> [ 0.335595] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
> [ 0.335632] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
> [ 0.335670] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
> [ 0.335707] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
> [ 0.335745] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
> [ 0.335783] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff]
> [ 0.335956] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.335969] pci 0000:00:1f.2: PME# disabled
> [ 0.335999] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
> [ 0.335999] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff]
> [ 0.335999] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
> [ 0.336324] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200
> [ 0.336408] pci 0000:09:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
> [ 0.336452] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff]
> [ 0.336760] pci 0000:09:00.0: supports D1 D2
> [ 0.336763] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.336778] pci 0000:09:00.0: PME# disabled
> [ 0.336999] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
> [ 0.336999] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
> [ 0.336999] pci 0000:00:1c.0: bridge window [mem
0xfe800000-0xfe8fffff]
> [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
> [ 0.336999] pci 0000:0b:00.0: [8086:4229] type 0 class 0x000280
> [ 0.336999] pci 0000:0b:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit]
> [ 0.337067] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
> [ 0.337106] pci 0000:0b:00.0: PME# disabled
> [ 0.337449] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
> [ 0.337467] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000]
(disabled)
> [ 0.337480] pci 0000:00:1c.1: bridge window [mem
0xfe700000-0xfe7fffff]
> [ 0.337504] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
> [ 0.337717] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
> [ 0.337734] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
> [ 0.337747] pci 0000:00:1c.4: bridge window [mem
0xfe400000-0xfe6fffff]
> [ 0.337770] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff
64bit pref]
> [ 0.337999] pci 0000:02:09.0: [1180:0832] type 0 class 0x000c00
> [ 0.337999] pci 0000:02:09.0: reg 10: [mem 0xfe3ff800-0xfe3fffff]
> [ 0.338031] pci 0000:02:09.0: supports D1 D2
> [ 0.338034] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.338085] pci 0000:02:09.0: PME# disabled
> [ 0.338160] pci 0000:02:09.1: [1180:0822] type 0 class 0x000805
> [ 0.338229] pci 0000:02:09.1: reg 10: [mem 0xfe3ff500-0xfe3ff5ff]
> [ 0.338532] pci 0000:02:09.1: supports D1 D2
> [ 0.338535] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.338550] pci 0000:02:09.1: PME# disabled
> [ 0.338624] pci 0000:02:09.2: [1180:0592] type 0 class 0x000880
> [ 0.338694] pci 0000:02:09.2: reg 10: [mem 0xfe3ff600-0xfe3ff6ff]
> [ 0.338995] pci 0000:02:09.2: supports D1 D2
> [ 0.338998] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.338999] pci 0000:02:09.2: PME# disabled
> [ 0.339070] pci 0000:02:09.3: [1180:0852] type 0 class 0x000880
> [ 0.339140] pci 0000:02:09.3: reg 10: [mem 0xfe3ff700-0xfe3ff7ff]
> [ 0.339441] pci 0000:02:09.3: supports D1 D2
> [ 0.339444] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.339459] pci 0000:02:09.3: PME# disabled
> [ 0.339654] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive
decode)
> [ 0.339672] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000]
(disabled)
> [ 0.339685] pci 0000:00:1e.0: bridge window [mem
0xfe300000-0xfe3fffff]
> [ 0.339709] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
> [ 0.339714] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
> [ 0.339718] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
> [ 0.339723] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
> [ 0.339727] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000dffff] (subtractive decode)
> [ 0.339735] pci 0000:00:1e.0: bridge window [mem
0xe0000000-0xf7ffffff] (subtractive decode)
> [ 0.339739] pci 0000:00:1e.0: bridge window [mem
0xfc000000-0xfebfffff] (subtractive decode)
> [ 0.339744] pci 0000:00:1e.0: bridge window [mem
0xfec10000-0xfecfffff] (subtractive decode)
> [ 0.339758] pci 0000:00:1e.0: bridge window [mem
0xfed1c000-0xfed1ffff] (subtractive decode)
> [ 0.339762] pci 0000:00:1e.0: bridge window [mem
0xfed90000-0xfed9ffff] (subtractive decode)
> [ 0.339767] pci 0000:00:1e.0: bridge window [mem
0xfeda7000-0xfedfffff] (subtractive decode)
> [ 0.339771] pci 0000:00:1e.0: bridge window [mem
0xfee10000-0xff9fffff] (subtractive decode)
> [ 0.339776] pci 0000:00:1e.0: bridge window [mem
0xffc00000-0xffdfffff] (subtractive decode)
> [ 0.339876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
> [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 0.345616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> [ 0.345999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
> [ 0.375866] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
> [ 0.376592] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
> [ 0.377418] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
> [ 0.377999] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0,
disabled.
> [ 0.378588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12
14 15)
> [ 0.378999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12
14 15)
> [ 0.379588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12
14 15)
> [ 0.379999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12
14 15) *0, disabled.
> [ 0.380062] HEST: Table is not found!
> [ 0.380149] xen_balloon: Initialising balloon driver.
> [ 0.380305] last_pfn = 0x13423c max_arch_pfn = 0x400000000
> [ 0.386887] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.386999] vgaarb: loaded
> [ 0.387816] SCSI subsystem initialized
> [ 0.388214] libata version 3.00 loaded.
> [ 0.388719] usbcore: registered new interface driver usbfs
> [ 0.388860] usbcore: registered new interface driver hub
> [ 0.389098] usbcore: registered new device driver usb
> [ 0.389507] PCI: Using ACPI for IRQ routing
> [ 0.389507] PCI: pci_cache_line_size set to 64 bytes
> [ 0.389861] reserve RAM buffer: 000000000009f000 - 000000000009ffff
> [ 0.389876] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff
> [ 0.389884] reserve RAM buffer: 000000013423c000 - 0000000137ffffff
> [ 0.390943] NetLabel: Initializing
> [ 0.390949] NetLabel: domain hash size = 128
> [ 0.390954] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.390999] NetLabel: unlabeled traffic allowed by default
> [ 0.391982] Switching to clocksource xen
> [ 0.513144] pnp: PnP ACPI init
> [ 0.513315] ACPI: bus type pnp registered
> [ 0.564054] pnp 00:00: [bus 00-ff]
> [ 0.564054] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 0.564054] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 0.575063] pnp 00:00: [io 0x0d00-0xffff window]
> [ 0.575068] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 0.575072] pnp 00:00: [mem 0x000d0000-0x000dffff window]
> [ 0.575077] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
> [ 0.575081] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
> [ 0.575085] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
> [ 0.575089] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
> [ 0.575093] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
> [ 0.575097] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
> [ 0.575101] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
> [ 0.575106] pnp 00:00: [mem 0xffc00000-0xffdfffff window]
> [ 0.575110] pnp 00:00: [mem 0x120000000-0x317ffffff window]
> [ 0.575776] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> [ 0.575877] pnp 00:01: [io 0x004e-0x004f]
> [ 0.575882] pnp 00:01: [io 0x0068-0x006f]
> [ 0.575886] pnp 00:01: [mem 0xff800000-0xff8fffff]
> [ 0.575890] pnp 00:01: [mem 0xffc00000-0xffcfffff]
> [ 0.576355] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.576498] xen: registering gsi 12 triggering 1 polarity 0
> [ 0.576503] xen_map_pirq_gsi: returning irq 12 for gsi 12
> [ 0.576510] xen: --> irq=12
> [ 0.576527] pnp 00:02: [irq 12]
> [ 0.576800] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
> [ 0.576939] pnp 00:03: [io 0x0060]
> [ 0.576943] pnp 00:03: [io 0x0064]
> [ 0.576947] pnp 00:03: [io 0x0062]
> [ 0.576950] pnp 00:03: [io 0x0066]
> [ 0.576954] xen: registering gsi 1 triggering 1 polarity 0
> [ 0.576958] xen_map_pirq_gsi: returning irq 1 for gsi 1
> [ 0.576965] xen: --> irq=1
> [ 0.576972] pnp 00:03: [irq 1]
> [ 0.577267] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
> [ 0.577413] pnp 00:04: [io 0x0070-0x0071]
> [ 0.577416] xen: registering gsi 8 triggering 1 polarity 0
> [ 0.577420] xen_map_pirq_gsi: returning irq 8 for gsi 8
> [ 0.577427] xen: --> irq=8
> [ 0.577435] pnp 00:04: [irq 8]
> [ 0.577447] pnp 00:04: [io 0x0072-0x0077]
> [ 0.577710] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.577884] pnp 00:05: [io 0x0061]
> [ 0.577888] pnp 00:05: [io 0x0063]
> [ 0.577892] pnp 00:05: [io 0x0065]
> [ 0.577895] pnp 00:05: [io 0x0067]
> [ 0.578188] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.578332] pnp 00:06: [io 0x0c80-0x0cff]
> [ 0.578836] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.579009] pnp 00:07: [dma 4]
> [ 0.579013] pnp 00:07: [io 0x0000-0x000f]
> [ 0.579016] pnp 00:07: [io 0x0080-0x0085]
> [ 0.579020] pnp 00:07: [io 0x0087-0x008f]
> [ 0.579023] pnp 00:07: [io 0x00c0-0x00df]
> [ 0.579026] pnp 00:07: [io 0x0010-0x001f]
> [ 0.579030] pnp 00:07: [io 0x0090-0x0091]
> [ 0.579030] pnp 00:07: [io 0x0093-0x009f]
> [ 0.579311] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.579453] pnp 00:08: [io 0x00f0-0x00ff]
> [ 0.579457] xen: registering gsi 13 triggering 1 polarity 0
> [ 0.579461] xen_map_pirq_gsi: returning irq 13 for gsi 13
> [ 0.579468] xen: --> irq=13
> [ 0.579476] pnp 00:08: [irq 13]
> [ 0.579772] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.580167] pnp 00:09: [mem 0xfed00000-0xfed003ff]
> [ 0.580745] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01
(active)
> [ 0.581487] pnp 00:0a: [io 0x0900-0x097f]
> [ 0.581487] pnp 00:0a: [io 0x0092]
> [ 0.581487] pnp 00:0a: [io 0x00b2-0x00b3]
> [ 0.581487] pnp 00:0a: [io 0x0020-0x0021]
> [ 0.581487] pnp 00:0a: [io 0x00a0-0x00a1]
> [ 0.581487] pnp 00:0a: [irq 0 disabled]
> [ 0.581487] pnp 00:0a: [io 0x04d0-0x04d1]
> [ 0.582587] pnp 00:0a: [io 0x1000-0x1005]
> [ 0.582591] pnp 00:0a: [io 0x1008-0x100f]
> [ 0.582738] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> [ 0.582750] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> [ 0.583328] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.583471] pnp 00:0b: [io 0xf400-0xf4fe]
> [ 0.583475] pnp 00:0b: [io 0x0086]
> [ 0.583479] pnp 00:0b: [io 0x1006-0x1007]
> [ 0.583483] pnp 00:0b: [io 0x100a-0x1059]
> [ 0.583486] pnp 00:0b: [io 0x1060-0x107f]
> [ 0.583490] pnp 00:0b: [io 0x1080-0x10bf]
> [ 0.583494] pnp 00:0b: [io 0x10c0-0x10df]
> [ 0.583497] pnp 00:0b: [io 0x1010-0x102f]
> [ 0.583501] pnp 00:0b: [io 0x0809]
> [ 0.583647] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> [ 0.583659] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> [ 0.583669] pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> [ 0.583680] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
> [ 0.584286] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.661805] pnp 00:0c: [mem 0x00000000-0x0009efff]
> [ 0.661805] pnp 00:0c: [mem 0x0009f000-0x0009ffff]
> [ 0.661805] pnp 00:0c: [mem 0x000c0000-0x000cffff]
> [ 0.661805] pnp 00:0c: [mem 0x000e0000-0x000fffff]
> [ 0.661805] pnp 00:0c: [mem 0x00100000-0xdf66d7ff]
> [ 0.661805] pnp 00:0c: [mem 0xdf66d800-0xdf6fffff]
> [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdf7fffff]
> [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdfefffff]
> [ 0.661805] pnp 00:0c: [mem 0xffe00000-0xffffffff]
> [ 0.661805] pnp 00:0c: [mem 0xffa00000-0xffbfffff]
> [ 0.661805] pnp 00:0c: [mem 0xfec00000-0xfec0ffff]
> [ 0.661805] pnp 00:0c: [mem 0xfee00000-0xfee0ffff]
> [ 0.661805] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
> [ 0.666782] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff]
> [ 0.666786] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff]
> [ 0.666790] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff]
> [ 0.666794] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff]
> [ 0.666798] pnp 00:0c: [mem 0xfed18000-0xfed1bfff]
> [ 0.666802] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
> [ 0.667567] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.668287] pnp: PnP ACPI: found 13 devices
> [ 0.668295] ACPI: ACPI bus type pnp unregistered
> [ 0.668353] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved
> [ 0.668365] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved
> [ 0.668418] system 00:06: [io 0x0c80-0x0cff] could not be reserved
> [ 0.668460] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
> [ 0.668510] system 00:0a: [io 0x0900-0x097f] has been reserved
> [ 0.668521] system 00:0a: [io 0x04d0-0x04d1] has been reserved
> [ 0.668559] system 00:0b: [io 0xf400-0xf4fe] has been reserved
> [ 0.668570] system 00:0b: [io 0x1080-0x10bf] has been reserved
> [ 0.668581] system 00:0b: [io 0x10c0-0x10df] has been reserved
> [ 0.668591] system 00:0b: [io 0x0809] has been reserved
> [ 0.668654] system 00:0c: [mem 0x00000000-0x0009efff] could not be
reserved
> [ 0.668672] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be
reserved
> [ 0.668689] system 00:0c: [mem 0x000c0000-0x000cffff] could not be
reserved
> [ 0.668706] system 00:0c: [mem 0x000e0000-0x000fffff] could not be
reserved
> [ 0.668723] system 00:0c: [mem 0x00100000-0xdf66d7ff] could not be
reserved
> [ 0.668735] system 00:0c: [mem 0xdf66d800-0xdf6fffff] has been reserved
> [ 0.668745] system 00:0c: [mem 0xdf700000-0xdf7fffff] has been reserved
> [ 0.668762] system 00:0c: [mem 0xdf700000-0xdfefffff] could not be
reserved
> [ 0.668773] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
> [ 0.668784] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved
> [ 0.668801] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be
reserved
> [ 0.668812] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved
> [ 0.668823] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.668833] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved
> [ 0.668844] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved
> [ 0.668855] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved
> [ 0.668866] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved
> [ 0.668877] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved
> [ 0.668887] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
> [ 0.694225] PM-Timer failed consistency check (0x0xffffff) - aborting.
> [ 0.694610] pci 0000:00:1c.0: BAR 15: assigned [mem
0xff600000-0xff7fffff 64bit pref]
> [ 0.694636] pci 0000:00:1c.1: BAR 15: assigned [mem
0xff400000-0xff5fffff 64bit pref]
> [ 0.694649] pci 0000:00:1c.1: BAR 13: assigned [io 0xb000-0xbfff]
> [ 0.694660] pci 0000:00:1c.0: PCI bridge to [bus 09-09]
> [ 0.694672] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
> [ 0.694694] pci 0000:00:1c.0: bridge window [mem
0xfe800000-0xfe8fffff]
> [ 0.694711] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff7fffff
64bit pref]
> [ 0.694740] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b]
> [ 0.694751] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.694773] pci 0000:00:1c.1: bridge window [mem
0xfe700000-0xfe7fffff]
> [ 0.694790] pci 0000:00:1c.1: bridge window [mem 0xff400000-0xff5fffff
64bit pref]
> [ 0.694818] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d]
> [ 0.694830] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
> [ 0.694851] pci 0000:00:1c.4: bridge window [mem
0xfe400000-0xfe6fffff]
> [ 0.694868] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff
64bit pref]
> [ 0.694897] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
> [ 0.694903] pci 0000:00:1e.0: bridge window [io disabled]
> [ 0.694925] pci 0000:00:1e.0: bridge window [mem
0xfe300000-0xfe3fffff]
> [ 0.694941] pci 0000:00:1e.0: bridge window [mem pref disabled]
> [ 0.694992] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.695042] xen: --> irq=16
> [ 0.695052] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
> [ 0.695072] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.695099] xen: registering gsi 17 triggering 0 polarity 1
> [ 0.695122] xen: --> irq=17
> [ 0.695127] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
> [ 0.695145] pci 0000:00:1c.1: setting latency timer to 64
> [ 0.695171] xen: registering gsi 16 triggering 0 polarity 1
> [ 0.695175] xen_map_pirq_gsi: returning irq 16 for gsi 16
> [ 0.695182] xen: --> irq=16
> [ 0.695185] Already setup the GSI :16
> [ 0.695190] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
> [ 0.695208] pci 0000:00:1c.4: setting latency timer to 64
> [ 0.695237] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.695246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.695250] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.695253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.695256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.695260] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
> [ 0.695263] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
> [ 0.695266] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
> [ 0.695269] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
> [ 0.695273] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
> [ 0.695276] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
> [ 0.695279] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
> [ 0.695282] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
> [ 0.695286] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
> [ 0.695289] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff]
> [ 0.695293] pci_bus 0000:09: resource 2 [mem 0xff600000-0xff7fffff 64bit
pref]
> [ 0.695296] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff]
> [ 0.695299] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff]
> [ 0.695303] pci_bus 0000:0b: resource 2 [mem 0xff400000-0xff5fffff 64bit
pref]
> [ 0.695306] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
> [ 0.695309] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff]
> [ 0.695313] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit
pref]
> [ 0.695316] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
> [ 0.695319] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
> [ 0.695322] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
> [ 0.695326] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.695329] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.695332] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xf7ffffff]
> [ 0.695335] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff]
> [ 0.695339] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff]
> [ 0.695342] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff]
> [ 0.695345] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff]
> [ 0.695348] pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff]
> [ 0.695352] pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff]
> [ 0.695355] pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff]
> [ 0.695620] NET: Registered protocol family 2
> [ 0.696895] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
> [ 0.702432] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
> [ 0.708388] TCP bind hash table entries: 65536 (order: 10, 5242880
bytes)
> [ 0.711010] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.711010] TCP reno registered
> [ 0.715466] UDP hash table entries: 4096 (order: 7, 786432 bytes)
> [ 0.717423] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes)
> [ 0.719200] NET: Registered protocol family 1
> [ 0.719302] pci 0000:00:02.0: Boot video device
> [ 0.720070] PCI: CLS 64 bytes, default 64
> [ 0.720814] Trying to unpack rootfs image as initramfs...
> [ 1.119817] Freeing initrd memory: 36712k freed
> [ 1.218370] DMA-API: preallocated 32768 debug entries
> [ 1.218386] DMA-API: debugging enabled by kernel config
> [ 1.218628] Simple Boot Flag at 0x79 set to 0x1
> [ 1.222512] audit: initializing netlink socket (disabled)
> [ 1.222603] type=2000 audit(1291408726.062:1): initialized
> [ 1.238278] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.265522] VFS: Disk quotas dquot_6.5.2
> [ 1.266072] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.271813] msgmni has been set to 6802
> [ 1.272678] SELinux: Registering netfilter hooks
> [ 1.274613] cryptomgr_test used greatest stack depth: 5448 bytes left
> [ 1.275406] alg: No test for stdrng (krng)
> [ 1.275771] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
> [ 1.275815] io scheduler noop registered
> [ 1.275822] io scheduler deadline registered
> [ 1.276284] io scheduler cfq registered (default)
> [ 1.276292] list_sort_test: start testing list_sort()
> [ 1.280781] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.281008] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.281008] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 1.284654] acpiphp: Slot [1] registered
> [ 1.285228] pci-stub: invalid id string ""
> [ 1.287390] ACPI: AC Adapter [AC] (on-line)
> [ 1.288364] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> [ 1.289760] ACPI: Lid Switch [LID]
> [ 1.290137] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> [ 1.290197] ACPI: Power Button [PBTN]
> [ 1.290648] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> [ 1.290670] ACPI: Sleep Button [SBTN]
> [ 1.293175] ACPI: acpi_idle registered with cpuidle
> [ 1.294827] Marking TSC unstable due to TSC halts in idle
> [ 1.319147] thermal LNXTHERM:00: registered as thermal_zone0
> [ 1.319147] ACPI: Thermal Zone [THM] (47 C)
> [ 1.319147] ERST: Table is not found!
> [ 1.400177] hpet_acpi_add: no address or irqs in _CRS
> [ 1.400672] Non-volatile memory driver v1.3
> [ 1.400679] Linux agpgart interface v0.103
> [ 1.401141] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
> [ 1.402701] agpgart-intel 0000:00:00.0: detected gtt size: 524288K
total, 262144K mappable
> [ 1.404490] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
> [ 1.411011] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
0xe0000000
> [ 1.411818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.421172] ACPI: Battery Slot [BAT0] (battery present)
> [ 1.439428] brd: module loaded
> [ 1.446285] loop: module loaded
> [ 1.447289] ahci 0000:00:1f.2: version 3.0
> [ 1.447326] xen: registering gsi 17 triggering 0 polarity 1
> [ 1.447344] xen_map_pirq_gsi: returning irq 17 for gsi 17
> [ 1.447351] xen: --> irq=17
> [ 1.447357] Already setup the GSI :17
> [ 1.447363] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
> [ 1.447710] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x5 impl SATA mode
> [ 1.447720] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum
part ccc ems
> [ 1.447740] ahci 0000:00:1f.2: setting latency timer to 64
> [ 1.453250] scsi0 : ahci
> [ 1.454595] scsi1 : ahci
> [ 1.455304] scsi2 : ahci
> [ 1.456260] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 17
> [ 1.456260] ata2: DUMMY
> [ 1.456260] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port
0xfe9fba00 irq 17
> [ 1.457680] ata_piix 0000:00:1f.1: version 2.13
> [ 1.457708] xen: registering gsi 16 triggering 0 polarity 1
> [ 1.457712] xen_map_pirq_gsi: returning irq 16 for gsi 16
> [ 1.457720] xen: --> irq=16
> [ 1.457724] Already setup the GSI :16
> [ 1.457731] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
> [ 1.457966] ata_piix 0000:00:1f.1: setting latency timer to 64
> [ 1.461571] scsi3 : ata_piix
> [ 1.462268] scsi4 : ata_piix
> [ 1.464011] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq
14
> [ 1.464011] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq
15
> [ 1.466684] ata5: port disabled. ignoring.
> [ 1.467029] Fixed MDIO Bus: probed
> [ 1.467683] ehci_hcd: USB 2.0 ''Enhanced'' Host
Controller (EHCI) Driver
> [ 1.467784] xen: registering gsi 22 triggering 0 polarity 1
> [ 1.467816] xen: --> irq=22
> [ 1.467825] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low)
-> IRQ 22
> [ 1.467909] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 1.467918] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 1.469012] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
> [ 1.469498] ehci_hcd 0000:00:1a.7: debug port 1
> [ 1.473404] ehci_hcd 0000:00:1a.7: cache line size of 64 is not
supported
> [ 1.473528] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
> [ 1.483064] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 1.483383] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
> [ 1.483391] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.483399] usb usb1: Product: EHCI Host Controller
> [ 1.483405] usb usb1: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd
> [ 1.483414] usb usb1: SerialNumber: 0000:00:1a.7
> [ 1.484917] hub 1-0:1.0: USB hub found
> [ 1.485040] hub 1-0:1.0: 4 ports detected
> [ 1.486129] xen: registering gsi 20 triggering 0 polarity 1
> [ 1.486153] xen: --> irq=20
> [ 1.486159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low)
-> IRQ 20
> [ 1.486232] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 1.486240] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 1.486697] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
> [ 1.487039] ehci_hcd 0000:00:1d.7: debug port 1
> [ 1.490952] ehci_hcd 0000:00:1d.7: cache line size of 64 is not
supported
> [ 1.491009] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
> [ 1.496054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 1.496233] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
> [ 1.496242] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.496250] usb usb2: Product: EHCI Host Controller
> [ 1.496256] usb usb2: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd
> [ 1.496264] usb usb2: SerialNumber: 0000:00:1d.7
> [ 1.497266] hub 2-0:1.0: USB hub found
> [ 1.497322] hub 2-0:1.0: 6 ports detected
> [ 1.498293] ohci_hcd: USB 1.1 ''Open'' Host Controller
(OHCI) Driver
> [ 1.498446] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.498758] xen: registering gsi 20 triggering 0 polarity 1
> [ 1.498763] xen_map_pirq_gsi: returning irq 20 for gsi 20
> [ 1.498770] xen: --> irq=20
> [ 1.498773] Already setup the GSI :20
> [ 1.498780] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low)
-> IRQ 20
> [ 1.498818] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1.498826] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 1.499273] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
> [ 1.499485] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
> [ 1.499854] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
> [ 1.499862] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.499870] usb usb3: Product: UHCI Host Controller
> [ 1.499876] usb usb3: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd
> [ 1.499885] usb usb3: SerialNumber: 0000:00:1a.0
> [ 1.500868] hub 3-0:1.0: USB hub found
> [ 1.500926] hub 3-0:1.0: 2 ports detected
> [ 1.501788] xen: registering gsi 21 triggering 0 polarity 1
> [ 1.501812] xen: --> irq=21
> [ 1.501819] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
> [ 1.501857] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 1.501865] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 1.502350] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
> [ 1.502645] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
> [ 1.502968] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
> [ 1.502977] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.502985] usb usb4: Product: UHCI Host Controller
> [ 1.502991] usb usb4: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd
> [ 1.503000] usb usb4: SerialNumber: 0000:00:1a.1
> [ 1.503918] hub 4-0:1.0: USB hub found
> [ 1.503974] hub 4-0:1.0: 2 ports detected
> [ 1.504830] xen: registering gsi 20 triggering 0 polarity 1
> [ 1.504835] xen_map_pirq_gsi: returning irq 20 for gsi 20
> [ 1.504842] xen: --> irq=20
> [ 1.504846] Already setup the GSI :20
> [ 1.504852] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low)
-> IRQ 20
> [ 1.504889] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 1.504898] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 1.505401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
> [ 1.505641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
> [ 1.505952] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001
> [ 1.505960] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.505968] usb usb5: Product: UHCI Host Controller
> [ 1.505973] usb usb5: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd
> [ 1.505982] usb usb5: SerialNumber: 0000:00:1d.0
> [ 1.506979] hub 5-0:1.0: USB hub found
> [ 1.507058] hub 5-0:1.0: 2 ports detected
> [ 1.508013] xen: registering gsi 21 triggering 0 polarity 1
> [ 1.508017] xen_map_pirq_gsi: returning irq 21 for gsi 21
> [ 1.508024] xen: --> irq=21
> [ 1.508053] Already setup the GSI :21
> [ 1.508060] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
> [ 1.508097] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 1.508106] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 1.508526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
> [ 1.508750] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
> [ 1.509110] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001
> [ 1.509118] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.509126] usb usb6: Product: UHCI Host Controller
> [ 1.509132] usb usb6: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd
> [ 1.509140] usb usb6: SerialNumber: 0000:00:1d.1
> [ 1.510075] hub 6-0:1.0: USB hub found
> [ 1.510142] hub 6-0:1.0: 2 ports detected
> [ 1.510954] xen: registering gsi 22 triggering 0 polarity 1
> [ 1.510958] xen_map_pirq_gsi: returning irq 22 for gsi 22
> [ 1.510965] xen: --> irq=22
> [ 1.510969] Already setup the GSI :22
> [ 1.510975] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low)
-> IRQ 22
> [ 1.511037] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 1.511045] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.511472] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
> [ 1.511709] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
> [ 1.512054] usb usb7: New USB device found, idVendor=1d6b,
idProduct=0001
> [ 1.512062] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
> [ 1.512070] usb usb7: Product: UHCI Host Controller
> [ 1.512076] usb usb7: Manufacturer: Linux
2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd
> [ 1.512084] usb usb7: SerialNumber: 0000:00:1d.2
> [ 1.512968] hub 7-0:1.0: USB hub found
> [ 1.513082] hub 7-0:1.0: 2 ports detected
> [ 1.514306] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
> [ 1.515012] i8042.c: Detected active multiplexing controller, rev 1.1.
> [ 1.541669] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.541669] serio: i8042 AUX0 port at 0x60,0x64 irq 12
> [ 1.542434] serio: i8042 AUX1 port at 0x60,0x64 irq 12
> [ 1.542708] serio: i8042 AUX2 port at 0x60,0x64 irq 12
> [ 1.542998] serio: i8042 AUX3 port at 0x60,0x64 irq 12
> [ 1.543959] mice: PS/2 mouse device common for all mice
> [ 1.545789] rtc_cmos 00:04: RTC can wake from S4
> [ 1.546497] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> [ 1.546589] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [ 1.547751] device-mapper: uevent: version 1.0.3
> [ 1.548982] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised:
dm-devel@redhat.com
> [ 1.550808] cpuidle: using governor ladder
> [ 1.552464] cpuidle: using governor menu
> [ 1.554429] usbcore: registered new interface driver usbhid
> [ 1.554436] usbhid: USB HID core driver
> [ 1.554755] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 1.559346] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.559463] TCP cubic registered
> [ 1.559469] Initializing XFRM netlink socket
> [ 1.559535] NET: Registered protocol family 17
> [ 1.559680] Registering the dns_resolver key type
> [ 1.560789] PM: Hibernation image not present or could not be loaded.
> [ 1.560912] registered taskstats version 1
> [ 1.561465] IMA: No TPM chip found, activating TPM-bypass!
> [ 1.563842] Magic number: 6:963:648
> [ 1.563871] scsi_host host2: hash matches
> [ 1.563877] scsi host2: hash matches
> [ 1.563983] processor LNXCPU:01: hash matches
> [ 1.564101] rtc_cmos 00:04: setting system clock to 2010-12-03 20:38:46
UTC (1291408726)
> [ 1.564389] Initalizing network drop monitor service
> [ 1.572051] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
> [ 1.636611] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max
UDMA/33
> [ 1.658414] ata4.00: configured for UDMA/33
> [ 1.753698] input: PS/2 Mouse as
/devices/platform/i8042/serio2/input/input4
> [ 1.761447] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio2/input/input5
> [ 1.763120] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.787219] usb 1-1: new high speed USB device using ehci_hcd and
address 2
> [ 1.907020] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640
> [ 1.907029] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [ 1.907037] usb 1-1: Product: Laptop Integrated Webcam
> [ 1.907043] usb 1-1: Manufacturer: OmniVision Technologies, Inc.
-2640-07.07.20.3
> [ 2.181227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 2.319160] usb 6-2: new low speed USB device using uhci_hcd and address
2
> [ 2.486280] usb 6-2: New USB device found, idVendor=046d, idProduct=c517
> [ 2.486289] usb 6-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [ 2.486296] usb 6-2: Product: USB Receiver
> [ 2.486302] usb 6-2: Manufacturer: Logitech
> [ 2.505613] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6
> [ 2.506889] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10
Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
> [ 36.001170] ata1.00: qc timeout (cmd 0x27)
> [ 36.001187] ata1.00: failed to read native max address (err_mask=0x4)
> [ 36.001194] ata1.00: HPA support seems broken, skipping HPA handling
> [ 36.001509] uhci_hcd 0000:00:1a.0: PCI INT A disabled
> [ 36.001858] uhci_hcd 0000:00:1a.1: PCI INT B disabled
> [ 36.002246] uhci_hcd 0000:00:1d.0: PCI INT A disabled
> [ 36.029123] logitech 0003:046D:C517.0002: fixing up Logitech keyboard
report descriptor
> [ 36.030289] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7
> [ 36.031983] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID
v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
> [ 36.238211] usb 7-2: new full speed USB device using uhci_hcd and
address 2
> [ 36.307575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 36.308293] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100
> [ 36.308310] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth
31/32), AA
> [ 36.309278] ata1.00: configured for UDMA/100
> [ 36.310595] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS
LB01 PQ: 0 ANSI: 5
> [ 36.312478] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 GiB)
> [ 36.312938] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 36.313039] sd 0:0:0:0: [sda] Write Protect is off
> [ 36.313047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 36.313264] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn''t support DPO or FUA
> [ 36.318433] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H
DW10 PQ: 0 ANSI: 5
> [ 36.335230] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
> [ 36.335244] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 36.336431] sr 3:0:0:0: Attached scsi CD-ROM sr0
> [ 36.337045] sr 3:0:0:0: Attached scsi generic sg1 type 5
> [ 36.398715] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500
> [ 36.398724] usb 7-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [ 36.398732] usb 7-2: Product: BCM2045B2
> [ 36.398737] usb 7-2: Manufacturer: Broadcom
> [ 36.400929] hub 7-2:1.0: USB hub found
> [ 36.402733] hub 7-2:1.0: 3 ports detected
> [ 36.679703] usb 7-2.1: new full speed USB device using uhci_hcd and
address 3
> [ 36.768221] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
> [ 36.772364] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 36.773011] Freeing unused kernel memory: 2744k freed
> [ 36.773011] Write protecting the kernel read-only data: 10240k
> [ 36.789969] Freeing unused kernel memory: 1276k freed
> [ 36.792956] Freeing unused kernel memory: 1616k freed
> [ 36.800534] usb 7-2.1: New USB device found, idVendor=413c,
idProduct=8126
> [ 36.800548] usb 7-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [ 36.800557] usb 7-2.1: Product: BCM2045
> [ 36.800562] usb 7-2.1: Manufacturer: Broadcom Corp
> [ 36.823979] mount used greatest stack depth: 5248 bytes left
> [ 36.874647] usb 7-2.2: new full speed USB device using uhci_hcd and
address 4
> [ 36.878951] dracut: dracut-006-5.fc14
> [ 36.943518] udev[84]: starting version 161
> [ 36.996694] usb 7-2.2: New USB device found, idVendor=0a5c,
idProduct=4502
> [ 36.996706] usb 7-2.2: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
> [ 36.996715] usb 7-2.2: Manufacturer: Broadcom Corp
> [ 105.689486] input: Broadcom Corp as
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8
> [ 105.690223] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID
v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
> [ 105.693130] ehci_hcd 0000:00:1d.7: PCI INT A disabled
> [ 105.693268] ehci_hcd 0000:00:1d.7: PME# enabled
> [ 105.755988] usb 7-2.3: new full speed USB device using uhci_hcd and
address 5
> [ 105.805477] udevadm used greatest stack depth: 5200 bytes left
> [ 105.875286] [drm] Initialized drm 1.1.0 20060810
> [ 105.915996] usb 7-2.3: New USB device found, idVendor=0a5c,
idProduct=4503
> [ 105.916011] usb 7-2.3: New USB device strings: Mfr=1, Product=0,
SerialNumber=0
> [ 105.916011] usb 7-2.3: Manufacturer: Broadcom Corp
> [ 105.932670] input: Broadcom Corp as
/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9
> [ 105.937353] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID
v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
> [ 105.948127] xen: registering gsi 16 triggering 0 polarity 1
> [ 105.948133] xen_map_pirq_gsi: returning irq 16 for gsi 16
> [ 105.948142] xen: --> irq=16
> [ 105.948147] Already setup the GSI :16
> [ 105.948155] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
> [ 105.948173] i915 0000:00:02.0: setting latency timer to 64
> [ 106.257101] [drm] MTRR allocation failed. Graphics performance may
suffer.
> [ 106.318984] composite sync not supported
> [ 106.488426] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 106.488878] [drm] initialized overlay support
> [ 106.489013] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM
is zero.
> [ 106.501316] composite sync not supported
> [ 106.511230] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM
is zero.
> [ 106.585871] fbcon: inteldrmfb (fb0) is primary device
> [ 106.587198] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM
is zero.
> [ 106.617125] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM
is zero.
> [ 106.617129] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM
is zero.
> [ 106.622541] Console: switching to colour frame buffer device 160x50
> [ 106.625011] fb0: inteldrmfb frame buffer device
> [ 106.625011] drm: registered panic notifier
> [ 106.674422] acpi device:30: registered as cooling_device2
> [ 106.677398] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input10
> [ 106.678382] ACPI: Video Device [VID] (multi-head: yes rom: no post:
no)
> [ 106.678663] [Firmware Bug]: Duplicate ACPI video bus devices for the
same VGA controller, please try module parameter
"video.allow_duplicates=1"if the current driver doesn''t work.
> [ 106.678943] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
> [ 106.681091] modprobe used greatest stack depth: 3632 bytes left
> [ 115.383580] dracut: Starting plymouth daemon
> [ 115.429847] composite sync not supported
> [ 116.062508] xen: registering gsi 16 triggering 0 polarity 1
> [ 116.062514] xen_map_pirq_gsi: returning irq 16 for gsi 16
> [ 116.062551] xen: --> irq=16
> [ 116.062557] Already setup the GSI :16
> [ 116.062579] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
> [ 116.084452] sdhci: Secure Digital Host Controller Interface driver
> [ 116.084498] sdhci: Copyright(c) Pierre Ossman
> [ 116.126456] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI
v1.10, 4 IR + 4 IT contexts, quirks 0x1
> [ 116.128758] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822]
(rev 22)
> [ 116.128837] xen: registering gsi 18 triggering 0 polarity 1
> [ 116.128867] xen: --> irq=18
> [ 116.128877] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low)
-> IRQ 18
> [ 116.132819] Registered led device: mmc0::
> [ 116.134397] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
> [ 131.799412] firewire_core: created device fw0: GUID 444fc00012d94c70,
S400
> [ 133.104764] dracut: Scanning devices sda7 for LVM volume groups
> [ 133.380718] dracut: Reading all physical volumes. This may take a
while...
> [ 133.382792] dracut: Found volume group "vg0" using metadata
type lvm2
> [ 143.325625] dracut: 7 logical volume(s) in volume group "vg0"
now active
> [ 143.417889] EXT4-fs (dm-8): mounted filesystem with ordered data mode.
Opts: (null)
> [ 143.510994] dracut: Remounting
/dev/disk/by-uuid/23bea158-7d3e-4112-82ae-4f394e0b8b56 with -o noatime,ro
> [ 143.544636] EXT4-fs (dm-8): mounted filesystem with ordered data mode.
Opts: (null)
> [ 143.585225] dracut: Mounted root filesystem /dev/mapper/vg0-austen3b
> [ 143.801926] dracut: Loading SELinux policy
> [ 144.342736] SELinux: 2048 avtab hash slots, 210512 rules.
> [ 144.664886] SELinux: 2048 avtab hash slots, 210512 rules.
> [ 145.997495] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens,
1024 cats
> [ 145.997502] SELinux: 77 classes, 210512 rules
> [ 146.025709] SELinux: Permission read_policy in class security not
defined in policy.
> [ 146.026023] SELinux: the above unknown classes and permissions will be
allowed
> [ 146.026023] SELinux: Completing initialization.
> [ 146.026023] SELinux: Setting up existing superblocks.
> [ 146.026023] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
> [ 146.026023] SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
> [ 146.026023] SELinux: initialized (dev bdev, type bdev), uses
genfs_contexts
> [ 146.026023] SELinux: initialized (dev proc, type proc), uses
genfs_contexts
> [ 146.026023] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
> [ 146.026023] SELinux: initialized (dev devtmpfs, type devtmpfs), uses
transition SIDs
> [ 146.026023] SELinux: initialized (dev sockfs, type sockfs), uses task
SIDs
> [ 146.026023] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
> [ 146.045012] SELinux: initialized (dev pipefs, type pipefs), uses task
SIDs
> [ 146.045012] SELinux: initialized (dev anon_inodefs, type anon_inodefs),
uses genfs_contexts
> [ 146.045012] SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
> [ 146.045012] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses
transition SIDs
> [ 146.045012] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
> [ 146.045012] SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
> [ 146.045012] SELinux: initialized (dev usbfs, type usbfs), uses
genfs_contexts
> [ 146.045012] SELinux: initialized (dev securityfs, type securityfs), uses
genfs_contexts
> [ 146.045012] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
> [ 146.045012] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
> [ 146.068415] SELinux: initialized (dev dm-8, type ext4), uses xattr
> [ 146.105894] type=1403 audit(1291408871.041:2): policy loaded
auid=4294967295 ses=4294967295
> [ 146.687015] restorecon used greatest stack depth: 3600 bytes left
> [ 146.972245] dracut: Switching root
> [ 148.433078] readahead-collector: starting
> [ 150.747204] udev[408]: starting version 161
> [ 151.763232] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 152.332329] Linux video capture interface: v2.00
> [ 152.427894] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam
(05a9:2640)
> [ 152.430482] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported.
Enabling workaround.
> [ 152.432985] uvcvideo: Failed to query (129) UVC probe control : -32
(exp. 26).
> [ 152.433625] uvcvideo: Failed to initialize the device (-5).
> [ 152.440323] usbcore: registered new interface driver uvcvideo
> [ 152.441019] USB Video Class driver (v1.0.0)
> [ 153.831044] wmi: Mapper loaded
> [ 154.014580] cfg80211: Calling CRDA to update world regulatory domain
> [ 154.345261] audit: name_count maxed, losing inode data: dev=00:07,
inode=10268
> [ 154.345329] audit: name_count maxed, losing inode data: dev=00:07,
inode=10268
> [ 154.345363] audit: name_count maxed, losing inode data: dev=00:07,
inode=10268
> [ 154.345418] audit: name_count maxed, losing inode data: dev=00:07,
inode=10260
> [ 154.345445] audit: name_count maxed, losing inode data: dev=00:07,
inode=10273
> [ 154.345471] audit: name_count maxed, losing inode data: dev=00:07,
inode=10273
> [ 154.345515] audit: name_count maxed, losing inode data: dev=00:07,
inode=10273
> [ 154.345543] audit: name_count maxed, losing inode data: dev=00:07,
inode=10273
> [ 154.345571] audit: name_count maxed, losing inode data: dev=00:07,
inode=10260
> [ 154.346002] audit: name_count maxed, losing inode data: dev=00:07,
inode=10278
> [ 154.346024] audit: name_count maxed, losing inode data: dev=00:07,
inode=10278
> [ 154.346090] audit: name_count maxed, losing inode data: dev=00:07,
inode=10278
> [ 154.346117] audit: name_count maxed, losing inode data: dev=00:07,
inode=10278
> [ 154.346146] audit: name_count maxed, losing inode data: dev=00:07,
inode=10260
> [ 154.346180] audit: name_count maxed, losing inode data: dev=00:07,
inode=10283
> [ 154.346206] audit: name_count maxed, losing inode data: dev=00:07,
inode=10283
> [ 154.346242] audit: name_count maxed, losing inode data: dev=00:07,
inode=10283
> [ 154.346544] audit: name_count maxed, losing inode data: dev=00:07,
inode=10283
> [ 154.346575] audit: name_count maxed, losing inode data: dev=00:07,
inode=1088
> [ 154.346604] audit: name_count maxed, losing inode data: dev=00:07,
inode=10288
> [ 154.346631] audit: name_count maxed, losing inode data: dev=00:07,
inode=10288
> [ 154.346657] audit: name_count maxed, losing inode data: dev=00:07,
inode=10288
> [ 154.346683] audit: name_count maxed, losing inode data: dev=00:07,
inode=10291
> [ 154.346718] audit: name_count maxed, losing inode data: dev=00:07,
inode=10291
> [ 154.346766] audit: name_count maxed, losing inode data: dev=00:07,
inode=10291
> [ 154.346793] audit: name_count maxed, losing inode data: dev=00:07,
inode=10291
> [ 154.346828] audit: name_count maxed, losing inode data: dev=00:07,
inode=10288
> [ 154.346854] audit: name_count maxed, losing inode data: dev=00:07,
inode=10296
> [ 154.346880] audit: name_count maxed, losing inode data: dev=00:07,
inode=10296
> [ 154.346919] audit: name_count maxed, losing inode data: dev=00:07,
inode=10296
> [ 154.347220] audit: name_count maxed, losing inode data: dev=00:07,
inode=10296
> [ 154.347276] audit: name_count maxed, losing inode data: dev=00:07,
inode=1088
> [ 154.347305] audit: name_count maxed, losing inode data: dev=00:07,
inode=10301
> [ 154.347331] audit: name_count maxed, losing inode data: dev=00:07,
inode=10301
> [ 154.347358] audit: name_count maxed, losing inode data: dev=00:07,
inode=10301
> [ 154.347384] audit: name_count maxed, losing inode data: dev=00:07,
inode=10304
> [ 154.347411] audit: name_count maxed, losing inode data: dev=00:07,
inode=10304
> [ 154.347454] audit: name_count maxed, losing inode data: dev=00:07,
inode=10304
> [ 154.347487] audit: name_count maxed, losing inode data: dev=00:07,
inode=10304
> [ 154.347517] audit: name_count maxed, losing inode data: dev=00:07,
inode=10301
> [ 154.347543] audit: name_count maxed, losing inode data: dev=00:07,
inode=10309
> [ 154.347569] audit: name_count maxed, losing inode data: dev=00:07,
inode=10309
> [ 154.347605] audit: name_count maxed, losing inode data: dev=00:07,
inode=10309
> [ 154.347632] audit: name_count maxed, losing inode data: dev=00:07,
inode=10309
> [ 154.347660] audit: name_count maxed, losing inode data: dev=00:07,
inode=10301
> [ 154.347713] audit: name_count maxed, losing inode data: dev=00:07,
inode=10314
> [ 154.347740] audit: name_count maxed, losing inode data: dev=00:07,
inode=10314
> [ 154.348207] audit: name_count maxed, losing inode data: dev=00:07,
inode=10314
> [ 154.348236] audit: name_count maxed, losing inode data: dev=00:07,
inode=10314
> [ 154.506418] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
in-tree:d
> [ 154.507037] iwlagn: Copyright(c) 2003-2010 Intel Corporation
> [ 154.513352] xen: registering gsi 17 triggering 0 polarity 1
> [ 154.513358] xen_map_pirq_gsi: returning irq 17 for gsi 17
> [ 154.514010] xen: --> irq=17
> [ 154.515084] Already setup the GSI :17
> [ 154.516062] iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
> [ 154.516062] iwlagn 0000:0b:00.0: setting latency timer to 64
> [ 154.521583] iwlagn 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link
4965AGN, REV=0x4
> [ 154.567366] iwlagn 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5
> [ 154.569748] iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19
802.11a channels
> [ 154.756009] sky2: driver version 1.28
> [ 154.762160] xen: registering gsi 16 triggering 0 polarity 1
> [ 154.762166] xen_map_pirq_gsi: returning irq 16 for gsi 16
> [ 154.763010] xen: --> irq=16
> [ 154.763822] Already setup the GSI :16
> [ 154.764770] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
> [ 154.767238] sky2 0000:09:00.0: setting latency timer to 64
> [ 154.767416] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
> [ 154.776659] sky2 0000:09:00.0: eth0: addr 00:1d:09:4a:96:a6
> [ 156.353946] Bluetooth: Core ver 2.15
> [ 156.359231] NET: Registered protocol family 31
> [ 156.360024] Bluetooth: HCI device and connection manager initialized
> [ 156.360024] Bluetooth: HCI socket layer initialized
> [ 156.569033] Bluetooth: Generic Bluetooth USB driver ver 0.6
> [ 156.578429] usbcore: registered new interface driver btusb
> [ 156.793307] iTCO_vendor_support: vendor-support=0
> [ 156.874972] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
> [ 156.877518] iTCO_wdt: Found a ICH8M TCO device (Version=2,
TCOBASE=0x1060)
> [ 156.880377] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 157.059584] input: Dell WMI hotkeys as /devices/virtual/input/input11
> [ 157.180515] xen: registering gsi 18 triggering 0 polarity 1
> [ 157.180521] xen_map_pirq_gsi: returning irq 18 for gsi 18
> [ 157.181010] xen: --> irq=18
> [ 157.182037] Already setup the GSI :18
> [ 157.183021] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) ->
IRQ 18
> [ 157.185724] r852: driver loaded succesfully
> [ 157.387499] iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24
> [ 157.894405] xen: registering gsi 21 triggering 0 polarity 1
> [ 157.894411] xen_map_pirq_gsi: returning irq 21 for gsi 21
> [ 157.895075] xen: --> irq=21
> [ 157.895936] Already setup the GSI :21
> [ 157.896888] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
> [ 157.899643] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 158.988157] cfg80211: World regulatory domain updated:
> [ 158.989015] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
> [ 158.989015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
> [ 158.989015] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
> [ 158.989015] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
> [ 158.989015] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
> [ 158.989015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
> [ 159.847134] cfg80211: Calling CRDA for country: GB
> [ 160.074022] ieee80211 phy0: Selected rate control algorithm
''iwl-agn-rs''
> [ 161.611185] ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1
(0xd/0x0/0x0/0x0/0x0)
> [ 161.611191] ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
> [ 161.611196] ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=2
(0xa/0xf/0x0/0x0/0x0)
> [ 161.611201] ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0
> [ 161.611205] ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x21/0x0
> [ 161.611210] ALSA sound/pci/hda/hda_codec.c:4632: inputs:
> [ 161.611214] ALSA sound/pci/hda/hda_codec.c:4638:
> [ 161.611785] ALSA sound/pci/hda/patch_sigmatel.c:3040: stac92xx:
dac_nids=2 (0x2/0x5/0x0/0x0/0x0)
> [ 162.492213] cfg80211: Regulatory domain changed to country: GB
> [ 162.493013] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
> [ 162.493013] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> [ 162.493013] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> [ 162.493013] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> [ 162.493013] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
> [ 163.788950] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 163.792143] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 163.794706] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [ 163.798976] audit: name_count maxed, losing inode data: dev=00:05,
inode=11782
> [ 163.799690] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.799816] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.803318] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.803369] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.805691] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.805753] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.808665] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.808921] audit: name_count maxed, losing inode data: dev=00:05,
inode=10183
> [ 163.811368] xen: registering gsi 17 triggering 0 polarity 1
> [ 163.811373] xen_map_pirq_gsi: returning irq 17 for gsi 17
> [ 163.812025] xen: --> irq=17
> [ 163.812691] Already setup the GSI :17
> [ 163.813676] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
> [ 163.915216] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
> [ 165.686148] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 169.198131] ip used greatest stack depth: 3488 bytes left
> [ 169.912335] SELinux: initialized (dev xenfs, type xenfs), uses
genfs_contexts
> [ 169.960778] Event-channel device installed.
> [ 172.164745] EXT4-fs (dm-8): re-mounted. Opts: (null)
> [ 174.063444] SELinux: initialized (dev binfmt_misc, type binfmt_misc),
uses genfs_contexts
> [ 176.849172] dmeventd (1025): /proc/1025/oom_adj is deprecated, please
use /proc/1025/oom_score_adj instead.
> [ 178.278183] NET: Registered protocol family 10
> [ 178.292650] lo: Disabled Privacy Extensions
> [ 178.335359] ip6_tables: (C) 2000-2006 Netfilter Core Team
> [ 188.895215] Bluetooth: L2CAP ver 2.15
> [ 188.896016] Bluetooth: L2CAP socket layer initialized
> [ 189.036115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 189.037059] Bluetooth: BNEP filters: protocol multicast
> [ 189.070325] Bluetooth: SCO (Voice Link) ver 0.6
> [ 189.071010] Bluetooth: SCO socket layer initialized
> [ 189.287778] Bluetooth: RFCOMM TTY layer initialized
> [ 189.288014] Bluetooth: RFCOMM socket layer initialized
> [ 189.288014] Bluetooth: RFCOMM ver 1.11
> [ 190.275241] sky2 0000:09:00.0: eth0: enabling interface
> [ 190.306010] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 190.671870] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 191.713023] btusb_intr_complete: hci0 urb ffff8800cf6fc630 failed to
resubmit (1)
> [ 191.716094] btusb_bulk_complete: hci0 urb ffff8800cf6fc948 failed to
resubmit (1)
> [ 191.718974] btusb_bulk_complete: hci0 urb ffff8800cf6fca50 failed to
resubmit (1)
> [ 194.208998] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
> [ 194.601189] XENBUS: Unable to read cpu state
> [ 194.606842] XENBUS: Unable to read cpu state
> [ 195.605014] Bridge firewalling registered
> [ 199.162255] Ebtables v2.0 registered
> [ 200.146258] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
> [ 200.147480] SELinux: initialized (dev proc, type proc), uses
genfs_contexts
> [ 200.200013] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
> [ 200.215545] lo: Disabled Privacy Extensions
> [ 200.226307] SELinux: initialized (dev proc, type proc), uses
genfs_contexts
> [ 228.501223] readahead-collector: sorting
> [ 228.815859] readahead-collector: finished
>
> (XEN) Xen version 4.0.1 (mockbuild@(none)) (gcc version 4.5.1 20100924 (Red
Hat 4.5.1-4) (GCC) ) Tue Oct 12 22:05:04 UTC 2010
> (XEN) Latest ChangeSet: unavailable
> (XEN) Bootloader: GNU GRUB 0.97
> (XEN) Command line:
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009f000 (usable)
> (XEN) 000000000009f000 - 00000000000a0000 (reserved)
> (XEN) 0000000000100000 - 00000000df66d800 (usable)
> (XEN) 00000000df66d800 - 00000000e0000000 (reserved)
> (XEN) 00000000f8000000 - 00000000fc000000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec10000 (reserved)
> (XEN) 00000000fed18000 - 00000000fed1c000 (reserved)
> (XEN) 00000000fed20000 - 00000000fed90000 (reserved)
> (XEN) 00000000feda0000 - 00000000feda6000 (reserved)
> (XEN) 00000000fee00000 - 00000000fee10000 (reserved)
> (XEN) 00000000ffe00000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000120000000 (usable)
> (XEN) ACPI: RSDP 000FBC60, 0024 (r2 DELL )
> (XEN) ACPI: XSDT DF66F200, 0064 (r1 DELL M08 27D90A1B ASL 61)
> (XEN) ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D90A1B ASL 61)
> (XEN) ACPI: DSDT DF66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624)
> (XEN) ACPI: FACS DF67E000, 0040
> (XEN) ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61)
> (XEN) ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D90A1B ASL 47)
> (XEN) ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D90A1B ASL
61)
> (XEN) ACPI: SLIC DF66F49C, 0176 (r1 DELL M08 27D90A1B ASL 61)
> (XEN) ACPI: OSFR DF66EA00, 002C (r1 DELL M08 27D90A1B ASL 61)
> (XEN) ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D90A1B ASL 61)
> (XEN) ACPI: SSDT DF66D97E, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
> (XEN) System RAM: 4086MB (4184112kB)
> (XEN) Domain heap initialised
> (XEN) Processor #0 7:7 APIC version 20
> (XEN) Processor #1 7:7 APIC version 20
> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2394.062 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) VMX: Supported advanced features:
> (XEN) - APIC MMIO access virtualisation
> (XEN) - APIC TPR shadow
> (XEN) - Virtual NMI
> (XEN) - MSR direct-access bitmap
> (XEN) HVM: ASIDs disabled.
> (XEN) HVM: VMX enabled
> (XEN) I/O virtualisation disabled
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Allocated console ring of 16 KiB.
> (XEN) Brought up 2 CPUs
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2ac8000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000110000000->0000000118000000 (967228 pages
to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff81000000->ffffffff82ac8000
> (XEN) Init. ramdisk: ffffffff82ac8000->ffffffff84ea1a00
> (XEN) Phys-Mach map: ffffffff84ea2000->ffffffff856431e0
> (XEN) Start info: ffffffff85644000->ffffffff856444b4
> (XEN) Page tables: ffffffff85645000->ffffffff85674000
> (XEN) Boot stack: ffffffff85674000->ffffffff85675000
> (XEN) TOTAL: ffffffff80000000->ffffffff85800000
> (XEN) ENTRY ADDRESS: ffffffff81d36200
> (XEN) Dom0 has maximum 2 VCPUs
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three
times to switch input to Xen)
> (XEN) Freed 172kB init memory.
> (XEN) ''h'' pressed -> showing installed handlers
> (XEN) key ''%'' (ascii ''25'') => trap
to xendbg
> (XEN) key ''*'' (ascii ''2a'') => print
all diagnostics
> (XEN) key ''0'' (ascii ''30'') => dump
Dom0 registers
> (XEN) key ''C'' (ascii ''43'') =>
trigger a crashdump
> (XEN) key ''H'' (ascii ''48'') => dump
heap info
> (XEN) key ''M'' (ascii ''4d'') => dump
MSI state
> (XEN) key ''N'' (ascii ''4e'') =>
trigger an NMI
> (XEN) key ''Q'' (ascii ''51'') => dump
PCI devices
> (XEN) key ''R'' (ascii ''52'') =>
reboot machine
> (XEN) key ''a'' (ascii ''61'') => dump
timer queues
> (XEN) key ''c'' (ascii ''63'') => dump
ACPI Cx structures
> (XEN) key ''d'' (ascii ''64'') => dump
registers
> (XEN) key ''e'' (ascii ''65'') => dump
evtchn info
> (XEN) key ''g'' (ascii ''67'') => print
grant table usage
> (XEN) key ''h'' (ascii ''68'') => show
this message
> (XEN) key ''i'' (ascii ''69'') => dump
interrupt bindings
> (XEN) key ''m'' (ascii ''6d'') =>
memory info
> (XEN) key ''n'' (ascii ''6e'') => NMI
statistics
> (XEN) key ''q'' (ascii ''71'') => dump
domain (and guest debug) info
> (XEN) key ''r'' (ascii ''72'') => dump
run queues
> (XEN) key ''s'' (ascii ''73'') => dump
softtsc stats
> (XEN) key ''t'' (ascii ''74'') =>
display multi-cpu clock info
> (XEN) key ''u'' (ascii ''75'') => dump
numa info
> (XEN) key ''v'' (ascii ''76'') => dump
Intel''s VMCS
> (XEN) key ''z'' (ascii ''7a'') => print
ioapic info
> (XEN) ''e'' pressed -> dumping event-channel info
> (XEN) Event channel information for domain 0:
> (XEN) Polling vCPUs: {}
> (XEN) port [p/m]
> (XEN) 1 [0/0]: s=5 n=0 v=0 x=0
> (XEN) 2 [0/0]: s=6 n=0 x=0
> (XEN) 3 [0/0]: s=6 n=0 x=0
> (XEN) 4 [0/0]: s=5 n=0 v=1 x=0
> (XEN) 5 [0/0]: s=6 n=0 x=0
> (XEN) 6 [0/0]: s=5 n=1 v=0 x=0
> (XEN) 7 [0/0]: s=6 n=1 x=0
> (XEN) 8 [0/0]: s=6 n=1 x=0
> (XEN) 9 [0/0]: s=5 n=1 v=1 x=0
> (XEN) 10 [0/0]: s=6 n=1 x=0
> (XEN) 11 [0/0]: s=3 n=1 d=0 p=25 x=0
> (XEN) 12 [0/0]: s=4 n=0 p=9 x=0
> (XEN) 13 [0/1]: s=5 n=0 v=2 x=0
> (XEN) 14 [0/0]: s=4 n=0 p=17 x=0
> (XEN) 15 [0/0]: s=4 n=0 p=14 x=0
> (XEN) 16 [0/0]: s=4 n=0 p=15 x=0
> (XEN) 17 [0/0]: s=4 n=0 p=22 x=0
> (XEN) 18 [0/0]: s=4 n=0 p=20 x=0
> (XEN) 19 [0/0]: s=4 n=0 p=21 x=0
> (XEN) 20 [0/0]: s=4 n=0 p=12 x=0
> (XEN) 21 [0/0]: s=4 n=0 p=1 x=0
> (XEN) 22 [0/0]: s=4 n=0 p=8 x=0
> (XEN) 23 [0/0]: s=4 n=0 p=16 x=0
> (XEN) 24 [0/0]: s=4 n=0 p=18 x=0
> (XEN) 25 [0/0]: s=3 n=0 d=0 p=11 x=0
> (XEN) 26 [0/0]: s=5 n=0 v=3 x=0
> (XEN) PCI-MSI interrupt information:
> (XEN) ==== PCI devices ===> (XEN) 02:09.3 - dom 0 - MSIs < >
> (XEN) 02:09.2 - dom 0 - MSIs < >
> (XEN) 02:09.1 - dom 0 - MSIs < >
> (XEN) 02:09.0 - dom 0 - MSIs < >
> (XEN) 0b:00.0 - dom 0 - MSIs < >
> (XEN) 09:00.0 - dom 0 - MSIs < >
> (XEN) 00:1f.3 - dom 0 - MSIs < >
> (XEN) 00:1f.2 - dom 0 - MSIs < >
> (XEN) 00:1f.1 - dom 0 - MSIs < >
> (XEN) 00:1f.0 - dom 0 - MSIs < >
> (XEN) 00:1e.0 - dom 0 - MSIs < >
> (XEN) 00:1d.7 - dom 0 - MSIs < >
> (XEN) 00:1d.2 - dom 0 - MSIs < >
> (XEN) 00:1d.1 - dom 0 - MSIs < >
> (XEN) 00:1d.0 - dom 0 - MSIs < >
> (XEN) 00:1c.4 - dom 0 - MSIs < >
> (XEN) 00:1c.1 - dom 0 - MSIs < >
> (XEN) 00:1c.0 - dom 0 - MSIs < >
> (XEN) 00:1b.0 - dom 0 - MSIs < >
> (XEN) 00:1a.7 - dom 0 - MSIs < >
> (XEN) 00:1a.1 - dom 0 - MSIs < >
> (XEN) 00:1a.0 - dom 0 - MSIs < >
> (XEN) 00:02.1 - dom 0 - MSIs < >
> (XEN) 00:02.0 - dom 0 - MSIs < >
> (XEN) 00:00.0 - dom 0 - MSIs < >
> (XEN) Guest interrupt information:
> (XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0
type=IO-APIC-edge status=00000000 mapped, unbound
> (XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 1(----),
> (XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2
type=XT-PIC status=00000000 mapped, unbound
> (XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:30
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:38
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:40
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:48
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:50
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:58
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(----),
> (XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:60
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(----),
> (XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:68
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:70
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:78
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 12(----),
> (XEN) IRQ: 13 affinity:00000000,00000000,00000000,00000003 vec:88
type=IO-APIC-edge status=00000002 mapped, unbound
> (XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:90
type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 14(----),
> (XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:98
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 15(----),
> (XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:a0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(----),
> (XEN) IRQ: 17 affinity:00000000,00000000,00000000,00000001 vec:a8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 17(----),
> (XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:c8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(----),
> (XEN) IRQ: 20 affinity:00000000,00000000,00000000,00000001 vec:b8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 20(----),
> (XEN) IRQ: 21 affinity:00000000,00000000,00000000,00000001 vec:c0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 21(----),
> (XEN) IRQ: 22 affinity:00000000,00000000,00000000,00000001 vec:b0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 22(----),
> (XEN) IO-APIC interrupt information:
> (XEN) IRQ 0 Vec240:
> (XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 1 Vec 40:
> (XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 3 Vec 48:
> (XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 4 Vec 56:
> (XEN) Apic 0x00, Pin 4: vector=56, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 5 Vec 64:
> (XEN) Apic 0x00, Pin 5: vector=64, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 6 Vec 72:
> (XEN) Apic 0x00, Pin 6: vector=72, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 7 Vec 80:
> (XEN) Apic 0x00, Pin 7: vector=80, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 8 Vec 88:
> (XEN) Apic 0x00, Pin 8: vector=88, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 9 Vec 96:
> (XEN) Apic 0x00, Pin 9: vector=96, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) IRQ 10 Vec104:
> (XEN) Apic 0x00, Pin 10: vector=104, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 11 Vec112:
> (XEN) Apic 0x00, Pin 11: vector=112, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 12 Vec120:
> (XEN) Apic 0x00, Pin 12: vector=120, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 13 Vec136:
> (XEN) Apic 0x00, Pin 13: vector=136, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1,
dest_id:3
> (XEN) IRQ 14 Vec144:
> (XEN) Apic 0x00, Pin 14: vector=144, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 15 Vec152:
> (XEN) Apic 0x00, Pin 15: vector=152, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0,
dest_id:1
> (XEN) IRQ 16 Vec160:
> (XEN) Apic 0x00, Pin 16: vector=160, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) IRQ 17 Vec168:
> (XEN) Apic 0x00, Pin 17: vector=168, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) IRQ 18 Vec200:
> (XEN) Apic 0x00, Pin 18: vector=200, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) IRQ 20 Vec184:
> (XEN) Apic 0x00, Pin 20: vector=184, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) IRQ 21 Vec192:
> (XEN) Apic 0x00, Pin 21: vector=192, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) IRQ 22 Vec176:
> (XEN) Apic 0x00, Pin 22: vector=176, delivery_mode=1,
dest_mode=logical, delivery_status=0, polarity=1, irr=0, trigger=level, mask=0,
dest_id:1
> (XEN) number of MP IRQ sources: 15.
> (XEN) number of IO-APIC #2 registers: 24.
> (XEN) testing the IO APIC.......................
> (XEN) IO APIC #2......
> (XEN) .... register #00: 00000000
> (XEN) ....... : physical APIC id: 00
> (XEN) ....... : Delivery Type: 0
> (XEN) ....... : LTS : 0
> (XEN) .... register #01: 00170020
> (XEN) ....... : max redirection entries: 0017
> (XEN) ....... : PRQ implemented: 0
> (XEN) ....... : IO APIC version: 0020
> (XEN) .... IRQ redirection table:
> (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> (XEN) 00 000 00 1 0 0 0 0 0 0 00
> (XEN) 01 001 01 0 0 0 0 0 1 1 28
> (XEN) 02 001 01 0 0 0 0 0 1 1 F0
> (XEN) 03 001 01 0 0 0 0 0 1 1 30
> (XEN) 04 001 01 0 0 0 0 0 1 1 38
> (XEN) 05 001 01 0 0 0 0 0 1 1 40
> (XEN) 06 001 01 0 0 0 0 0 1 1 48
> (XEN) 07 001 01 0 0 0 0 0 1 1 50
> (XEN) 08 001 01 0 0 0 0 0 1 1 58
> (XEN) 09 001 01 0 1 0 0 0 1 1 60
> (XEN) 0a 001 01 0 0 0 0 0 1 1 68
> (XEN) 0b 001 01 0 0 0 0 0 1 1 70
> (XEN) 0c 001 01 0 0 0 0 0 1 1 78
> (XEN) 0d 003 03 1 0 0 0 0 1 1 88
> (XEN) 0e 001 01 0 0 0 0 0 1 1 90
> (XEN) 0f 001 01 0 0 0 0 0 1 1 98
> (XEN) 10 001 01 0 1 0 1 0 1 1 A0
> (XEN) 11 001 01 0 1 0 1 0 1 1 A8
> (XEN) 12 001 01 0 1 0 1 0 1 1 C8
> (XEN) 13 000 00 1 0 0 0 0 0 0 00
> (XEN) 14 001 01 0 1 0 1 0 1 1 B8
> (XEN) 15 001 01 0 1 0 1 0 1 1 C0
> (XEN) 16 001 01 0 1 0 1 0 1 1 B0
> (XEN) 17 000 00 1 0 0 0 0 0 0 00
> (XEN) Using vector-based indexing
> (XEN) IRQ to pin mappings:
> (XEN) IRQ240 -> 0:2
> (XEN) IRQ40 -> 0:1
> (XEN) IRQ48 -> 0:3
> (XEN) IRQ56 -> 0:4
> (XEN) IRQ64 -> 0:5
> (XEN) IRQ72 -> 0:6
> (XEN) IRQ80 -> 0:7
> (XEN) IRQ88 -> 0:8
> (XEN) IRQ96 -> 0:9
> (XEN) IRQ104 -> 0:10
> (XEN) IRQ112 -> 0:11
> (XEN) IRQ120 -> 0:12
> (XEN) IRQ136 -> 0:13
> (XEN) IRQ144 -> 0:14
> (XEN) IRQ152 -> 0:15
> (XEN) IRQ160 -> 0:16
> (XEN) IRQ168 -> 0:17
> (XEN) IRQ200 -> 0:18
> (XEN) IRQ184 -> 0:20
> (XEN) IRQ192 -> 0:21
> (XEN) IRQ176 -> 0:22
> (XEN) .................................... done.
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel