Tim Moore
2009-Apr-15 10:41 UTC
[Xen-devel] RE: Some questions of VT-D graphic passthrough
Answers inline below…. I heard the good news you published from Xen Maillist.That really inspired me. Recently i was working on vt-d graphic passthrough experiment. That was a real tough job for me. I faced some problems that you may also met before. So i hope you can give me any advises or informaitons. Any reply appreciated! HardWare: Q35 matherboard + PCIE NVIDIA 9400 + PCI ATI R128 + IGD Intel Two Monitors connected with respective cards OS : Domain0 (Gentoo X86_64 2.6.28) DomainU (Ubuntu i386 / windows xp / RedHat Ent4.5) Xen3.3.1 At first ,I assumed the Matherboard integrated graphic card for Domain0 then passthrough the PCIE NVIDIA graphic card for DomainU. But My Matherboard cann''t support those two cards work together. And Everytime i use the PCIE card render for Domain0, the VT-D can''t be Enable Because of the RMMR incorrect. See: http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html Use this work around and (/* the whole “if” section */) and recompile Xen I think VT-d is needed for this to work … Considered that reason , the PCIE card was aborted in my experiment. Now I use the integrated card as the primary card ,the ATI PCI graphic card as the secondly. Now i face the problem is that the DomainU asigned the ATI card can''t displaied on the Monitor connected with the ATI card.>From you information on Xen maillist,you passthrough the PCIE NVIDIA card to DomainU --> boot from console --> setup the proper driver for that card --> startx --> then the DomainU display on the second Monitor Any other works ? Is that right? You didn''t change any source codes. The whole process are works about configurations. I tried install a R128 driver in DomainU for the ATI card and Modified the xorg.conf(/etc/X11/xorg.conf) to tell the DomainU use the ATI card do render work. whatever i do the DomainU always stay on the same screen. Now i have none idea for the next step . Hope you can give me some help. Thanks so much ! -- Best regards ! 周魏 E-mail: weizhou.sir@gmail.com<mailto:weizhou.sir@gmail.com> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Jean Guyader
2009-Apr-15 10:47 UTC
Re: [Xen-devel] RE: Some questions of VT-D graphic passthrough
Hi, 2009/4/15 Tim Moore <timothy.moore@expidas.net>:> Answers inline below…. > > > > I heard the good news you published from Xen Maillist.That really > inspired me. Recently i was working on vt-d graphic passthrough experiment. > That was a real tough job for me. I faced some problems that you may also > met before. So i hope you can give me any advises or informaitons. > Any reply appreciated! > > HardWare: Q35 matherboard + PCIE NVIDIA 9400 + PCI ATI R128 + IGD Intel > Two Monitors connected with respective cards > OS : Domain0 (Gentoo X86_64 2.6.28) > DomainU (Ubuntu i386 / windows xp / RedHat Ent4.5) > Xen3.3.1 > > At first ,I assumed the Matherboard integrated graphic card for Domain0 then > passthrough the PCIE NVIDIA graphic card for DomainU. > But My Matherboard cann''t support those two cards work together. > And Everytime i use the PCIE card render for Domain0, the VT-D can''t be > Enable Because of the RMMR incorrect. > > > > See: > > http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html > > > > Use this work around and (/* the whole “if” section */) and recompile Xen > > > > I think VT-d is needed for this to work … > > Considered that reason , the PCIE card was aborted in my experiment. > Now I use the integrated card as the primary card ,the ATI PCI graphic card > as the secondly. > Now i face the problem is that the DomainU asigned the ATI card can''t > displaied on the Monitor connected with the ATI card. >ATI graphic driver doesn''t work with vt-d.> From you information on Xen maillist, > you passthrough the PCIE NVIDIA card to DomainU --> boot from console --> > setup the proper driver for that card --> startx --> then the DomainU > display on the second Monitor > Any other works ? > Is that right? You didn''t change any source codes. The whole process are > works about configurations. > I tried install a R128 driver in DomainU for the ATI card and Modified the > xorg.conf(/etc/X11/xorg.conf) to tell the DomainU use the ATI card do render > work. > whatever i do the DomainU always stay on the same screen. > > Now i have none idea for the next step . > Hope you can give me some help. >Usually the linux drivers are a bit more flexible. And works with vt-d. -- Jean Guyader _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
wei zhou
2009-Apr-15 11:39 UTC
Re: [Xen-devel] RE: Some questions of VT-D graphic passthrough
That means the proper graphic driver can make the DomainU displaied on the seconed screen. It that all right ? Without any patch or source modification. 2009/4/15 Jean Guyader <jean.guyader@gmail.com>> Hi, > > 2009/4/15 Tim Moore <timothy.moore@expidas.net>: > > Answers inline below…. > > > > > > > > I heard the good news you published from Xen Maillist.That really > > inspired me. Recently i was working on vt-d graphic passthrough > experiment. > > That was a real tough job for me. I faced some problems that you may also > > met before. So i hope you can give me any advises or informaitons. > > Any reply appreciated! > > > > HardWare: Q35 matherboard + PCIE NVIDIA 9400 + PCI ATI R128 + IGD Intel > > Two Monitors connected with respective cards > > OS : Domain0 (Gentoo X86_64 2.6.28) > > DomainU (Ubuntu i386 / windows xp / RedHat Ent4.5) > > Xen3.3.1 > > > > At first ,I assumed the Matherboard integrated graphic card for Domain0 > then > > passthrough the PCIE NVIDIA graphic card for DomainU. > > But My Matherboard cann''t support those two cards work together. > > And Everytime i use the PCIE card render for Domain0, the VT-D can''t be > > Enable Because of the RMMR incorrect. > > > > > > > > See: > > > > http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html > > > > > > > > Use this work around and (/* the whole “if” section */) and recompile Xen > > > > > > > > I think VT-d is needed for this to work … > > > > Considered that reason , the PCIE card was aborted in my experiment. > > Now I use the integrated card as the primary card ,the ATI PCI graphic > card > > as the secondly. > > Now i face the problem is that the DomainU asigned the ATI card can''t > > displaied on the Monitor connected with the ATI card. > > > > ATI graphic driver doesn''t work with vt-d. > > > From you information on Xen maillist, > > you passthrough the PCIE NVIDIA card to DomainU --> boot from console > --> > > setup the proper driver for that card --> startx --> then the DomainU > > display on the second Monitor > > Any other works ? > > Is that right? You didn''t change any source codes. The whole process are > > works about configurations. > > I tried install a R128 driver in DomainU for the ATI card and Modified > the > > xorg.conf(/etc/X11/xorg.conf) to tell the DomainU use the ATI card do > render > > work. > > whatever i do the DomainU always stay on the same screen. > > > > Now i have none idea for the next step . > > Hope you can give me some help. > > > > Usually the linux drivers are a bit more flexible. And works with vt-d. > > -- > Jean Guyader >-- Best regards ! William zhou E-mail: weizhou.sir@gmail.com _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Stefano Stabellini
2009-Apr-15 13:39 UTC
Re: [Xen-devel] RE: Some questions of VT-D graphic passthrough
wei zhou wrote:> That means the proper graphic driver can make the DomainU displaied on > the seconed screen. > It that all right ? > Without any patch or source modification.Yes but ATI graphic cards do not support passthrough at the moment. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Cihula, Joseph
2009-Apr-15 17:21 UTC
[Xen-devel] RE: Some questions of VT-D graphic passthrough
And Everytime i use the PCIE card render for Domain0, the VT-D can''t be Enable Because of the RMMR incorrect. Are you using the latest BIOS version? There have been several BIOS releases that have improved VT-d and TXT support. Joe From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Tim Moore Sent: Wednesday, April 15, 2009 3:42 AM To: ''wei zhou'' Cc: xen-devel@lists.xensource.com Subject: [Xen-devel] RE: Some questions of VT-D graphic passthrough Answers inline below…. I heard the good news you published from Xen Maillist.That really inspired me. Recently i was working on vt-d graphic passthrough experiment. That was a real tough job for me. I faced some problems that you may also met before. So i hope you can give me any advises or informaitons. Any reply appreciated! HardWare: Q35 matherboard + PCIE NVIDIA 9400 + PCI ATI R128 + IGD Intel Two Monitors connected with respective cards OS : Domain0 (Gentoo X86_64 2.6.28) DomainU (Ubuntu i386 / windows xp / RedHat Ent4.5) Xen3.3.1 At first ,I assumed the Matherboard integrated graphic card for Domain0 then passthrough the PCIE NVIDIA graphic card for DomainU. But My Matherboard cann''t support those two cards work together. And Everytime i use the PCIE card render for Domain0, the VT-D can''t be Enable Because of the RMMR incorrect. See: http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html Use this work around and (/* the whole “if” section */) and recompile Xen I think VT-d is needed for this to work … Considered that reason , the PCIE card was aborted in my experiment. Now I use the integrated card as the primary card ,the ATI PCI graphic card as the secondly. Now i face the problem is that the DomainU asigned the ATI card can''t displaied on the Monitor connected with the ATI card.>From you information on Xen maillist,you passthrough the PCIE NVIDIA card to DomainU --> boot from console --> setup the proper driver for that card --> startx --> then the DomainU display on the second Monitor Any other works ? Is that right? You didn''t change any source codes. The whole process are works about configurations. I tried install a R128 driver in DomainU for the ATI card and Modified the xorg.conf(/etc/X11/xorg.conf) to tell the DomainU use the ATI card do render work. whatever i do the DomainU always stay on the same screen. Now i have none idea for the next step . Hope you can give me some help. Thanks so much ! -- Best regards ! 周魏 E-mail: weizhou.sir@gmail.com<mailto:weizhou.sir@gmail.com> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Ross Philipson
2009-Apr-15 17:28 UTC
[Xen-devel] RE: Some questions of VT-D graphic passthrough
Also a workaround was introduced a few months ago to work around RMRR mapping issues in dom0. You use the parameter “iommu_inclusive_mapping=1“ on the xen command line to map all reserved and conventional memory below 4GB for the iommu. Maybe this would help. Thanks Ross From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Cihula, Joseph Sent: Wednesday, April 15, 2009 1:22 PM To: Tim Moore; ''wei zhou'' Cc: xen-devel@lists.xensource.com Subject: [Xen-devel] RE: Some questions of VT-D graphic passthrough And Everytime i use the PCIE card render for Domain0, the VT-D can''t be Enable Because of the RMMR incorrect. Are you using the latest BIOS version? There have been several BIOS releases that have improved VT-d and TXT support. Joe From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Tim Moore Sent: Wednesday, April 15, 2009 3:42 AM To: ''wei zhou'' Cc: xen-devel@lists.xensource.com Subject: [Xen-devel] RE: Some questions of VT-D graphic passthrough Answers inline below…. I heard the good news you published from Xen Maillist.That really inspired me. Recently i was working on vt-d graphic passthrough experiment. That was a real tough job for me. I faced some problems that you may also met before. So i hope you can give me any advises or informaitons. Any reply appreciated! HardWare: Q35 matherboard + PCIE NVIDIA 9400 + PCI ATI R128 + IGD Intel Two Monitors connected with respective cards OS : Domain0 (Gentoo X86_64 2.6.28) DomainU (Ubuntu i386 / windows xp / RedHat Ent4.5) Xen3.3.1 At first ,I assumed the Matherboard integrated graphic card for Domain0 then passthrough the PCIE NVIDIA graphic card for DomainU. But My Matherboard cann''t support those two cards work together. And Everytime i use the PCIE card render for Domain0, the VT-D can''t be Enable Because of the RMMR incorrect. See: http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html Use this work around and (/* the whole “if” section */) and recompile Xen I think VT-d is needed for this to work … Considered that reason , the PCIE card was aborted in my experiment. Now I use the integrated card as the primary card ,the ATI PCI graphic card as the secondly. Now i face the problem is that the DomainU asigned the ATI card can''t displaied on the Monitor connected with the ATI card.>From you information on Xen maillist,you passthrough the PCIE NVIDIA card to DomainU --> boot from console --> setup the proper driver for that card --> startx --> then the DomainU display on the second Monitor Any other works ? Is that right? You didn''t change any source codes. The whole process are works about configurations. I tried install a R128 driver in DomainU for the ATI card and Modified the xorg.conf(/etc/X11/xorg.conf) to tell the DomainU use the ATI card do render work. whatever i do the DomainU always stay on the same screen. Now i have none idea for the next step . Hope you can give me some help. Thanks so much ! -- Best regards ! 周魏 E-mail: weizhou.sir@gmail.com<mailto:weizhou.sir@gmail.com> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Unfortunately, The BIOS of my motherboard can''t be updaded . Because the board is not a Intel One which just used the Q35 chips. So if i want use the PCIE NVIDIA card with the VT-D enable. I ought to follow that way. http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html Use this work around and (/* the whole “if” section */) and recompile Xen I knew which was not a good way but i have no choice.Now I have modified the source code and recompiled. Everything seems good . Domain0 works with VT-D. DomainU asigned the PCIE NVIDIA card and installed the nvidia-177-83 drivers. But I am still face the tough question mentioned before that DomainU cann''t be displaied on the second screen. Booted the DomainU with console --> configured the driver for card --> startx DomainU staied on the same screen then went into black screen but still alived. 2009/4/16 Ross Philipson <Ross.Philipson@citrix.com>> Also a workaround was introduced a few months ago to work around RMRR > mapping issues in dom0. You use the parameter “iommu_inclusive_mapping=1“ > on the xen command line to map all reserved and conventional memory below > 4GB for the iommu. Maybe this would help. > > > > Thanks > > Ross > > > > *From:* xen-devel-bounces@lists.xensource.com [mailto: > xen-devel-bounces@lists.xensource.com] *On Behalf Of *Cihula, Joseph > *Sent:* Wednesday, April 15, 2009 1:22 PM > *To:* Tim Moore; ''wei zhou'' > > *Cc:* xen-devel@lists.xensource.com > *Subject:* [Xen-devel] RE: Some questions of VT-D graphic passthrough > > > > And Everytime i use the PCIE card render for Domain0, the VT-D can''t be > Enable Because of the RMMR incorrect. > > > > Are you using the latest BIOS version? There have been several BIOS > releases that have improved VT-d and TXT support. > > > > Joe > > > > *From:* xen-devel-bounces@lists.xensource.com [mailto: > xen-devel-bounces@lists.xensource.com] *On Behalf Of *Tim Moore > *Sent:* Wednesday, April 15, 2009 3:42 AM > *To:* ''wei zhou'' > *Cc:* xen-devel@lists.xensource.com > *Subject:* [Xen-devel] RE: Some questions of VT-D graphic passthrough > > > > Answers inline below…. > > > > > I heard the good news you published from Xen Maillist.That really > inspired me. Recently i was working on vt-d graphic passthrough experiment. That was a real tough job for me. I faced some problems that you > may also met before. So i hope you can give me any advises or informaitons. > Any reply appreciated! > > HardWare: Q35 matherboard + PCIE NVIDIA 9400 + PCI ATI R128 + IGD Intel > Two Monitors connected with respective cards > OS : Domain0 (Gentoo X86_64 2.6.28) > DomainU (Ubuntu i386 / windows xp / RedHat Ent4.5) > Xen3.3.1 > > At first ,I assumed the Matherboard integrated graphic card for Domain0 > then passthrough the PCIE NVIDIA graphic card for DomainU. > But My Matherboard cann''t support those two cards work together. > And Everytime i use the PCIE card render for Domain0, the VT-D can''t be > Enable Because of the RMMR incorrect. > > > > See: > > http://www.nabble.com/Re:-Re:-VT-D-RMRR-is-incorrect-p22022061.html > > > > Use this work around and (/* the whole “if” section */) and recompile Xen > > > > I think VT-d is needed for this to work … > > > Considered that reason , the PCIE card was aborted in my experiment. > Now I use the integrated card as the primary card ,the ATI PCI graphic card > as the secondly. > Now i face the problem is that the DomainU asigned the ATI card can''t > displaied on the Monitor connected with the ATI card. > > From you information on Xen maillist, > you passthrough the PCIE NVIDIA card to DomainU --> boot from console --> > setup the proper driver for that card --> startx --> then the DomainU > display on the second Monitor > Any other works ? > Is that right? You didn''t change any source codes. The whole process are > works about configurations. > I tried install a R128 driver in DomainU for the ATI card and Modified the > xorg.conf(/etc/X11/xorg.conf) to tell the DomainU use the ATI card do render > work. > whatever i do the DomainU always stay on the same screen. > > Now i have none idea for the next step . > Hope you can give me some help. > > Thanks so much ! > > > > -- > Best regards ! > 周魏 > E-mail: weizhou.sir@gmail.com >-- Best regards ! William zhou E-mail: weizhou.sir@gmail.com _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel