Han, Weidong
2008-Jul-31 02:16 UTC
[Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164
Hi Stefan, The page fault (REASON 2) indicates the present (P) field of context entry is clear. That means it didn''t map context for the device (11:06.0). However, there is "(XEN) PCI add device 11:06.0" in the log, it should map context for the device. Can you add a check in intel_iommu_add_device() to see whether map context for device (11:06.0)? In our several testing platforms, we didn''t meet this issue. Can you attach the output of lspci -v? Did you run Xen 3.2.1 on the latest BIOS? If Xen 3.2.1 can work on the same environment, it may be related to dom0 add/remove device hypercall mechanism. Randy (Weidong) ________________________________ From: Mitov, Stefan [mailto:stefan.mitov@siemens.com] Sent: 2008年7月30日 20:26 To: Han, Weidong; Keir Fraser Cc: xen-devel@lists.xensource.com; Handfest, Werner; Azem, Gassan Subject: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164 Hi all, i''m using the unstable version of Xen 3.3, changeset 18164. I''m trying to do some performance measurements of network adapters. Without enabling vt-d features on my HP xw8600 i have no problems to start dom0 and some domU. But when i set the parameter "iommu=1" i can not boot even the dom0. It occurs a Primary Pending Fault by DMA Write request. I''m using the latest BIOS version (01.24 Rev.a) of the HP machine. Previously i used vt-d on the same architecture with Xen 3.2.1 and it worked very fine. I''ve added a log output from the serial console. Some suggestions from you? (XEN) Xen version 3.3.0-rc2-pre (root@) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Wed Jul 30 13:24:27 CEST 2008 (XEN) Latest ChangeSet: Tue Jul 29 13:27:29 2008 +0100 18164:b0ee5e8613e9 (XEN) Command line: iommu=1 com1=115200,8n1 console=com1 apic_verbosity=debug vga numa=on xenheap_megabytes=64 noreboot dom0_mem=min:512M,max:2048M,1024M loglvl=all guest_loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 000000000009ec00 - 00000000000a0000 (reserved) (XEN) 00000000000e8000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cffc2840 (usable) (XEN) 00000000cffc2840 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000130000000 (usable) (XEN) System RAM: 4095MB (4193664kB) (XEN) ACPI: RSDP 000E9810, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT CFFC52EC, 006C (r1 HPQOEM SLIC-WKS 20080701 0) (XEN) ACPI: FACP CFFC5494, 00F4 (r3 HPQOEM SEABURG 1 0) (XEN) ACPI Error (tbfadt-0455): 32/64X address mismatch in "Gpe0Block": [0000F828] [000000000001F030], using 64X [20070126] (XEN) ACPI: DSDT CFFC5A7A, 26A4 (r1 HPQOEM DSDT 1 MSFT 100000E) (XEN) ACPI: FACS CFFC5200, 0040 (XEN) ACPI: SSDT CFFC811E, 701D (r1 HPQOEM PROJECT 1 MSFT 100000E) (XEN) ACPI: APIC CFFC5588, 00D4 (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: ASF! CFFC565C, 006A (r32 HPQOEM SEABURG 1 0) (XEN) ACPI: MCFG CFFC585E, 003C (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: SLIC CFFC589A, 0176 (r1 HPQOEM SLIC-WKS 1 0) (XEN) ACPI: HPET CFFC5A10, 0038 (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: TCPA CFFC5A48, 0032 (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: DMAR CFFC56C6, 0120 (r1 HPQOEM SEABURG 1 0) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000130000000 (XEN) Xen heap: 9MB (9640kB) (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fe700 (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0xf808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0] (XEN) ACPI: wakeup_vec[cffc520c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) (XEN) Processor #5 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) (XEN) Processor #3 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) (XEN) Processor #7 7:7 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47 (XEN) ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48]) (XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:435: Host address width 36 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe710000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:1.0 sec = 80 sub = 80 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe712000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:3.0 sec = a0 sub = a0 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe714000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:5.0 sec = 60 sub = 60 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe719000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:9.0 sec = 10 sub = 40 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe718000 (XEN) [VT-D]dmar.c:326: found INCLUDE_ALL (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.3 (XEN) Intel VT-d has been enabled (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to fffdf000 (fee00000) (XEN) mapped IOAPIC to fffde000 (fec00000) (XEN) mapped IOAPIC to fffdd000 (fec89000) (XEN) mapped IOAPIC to fffdc000 (fec88000) (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2833.483 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) HVM: VMX enabled (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Getting VERSION: 50014 (XEN) Getting VERSION: 50014 (XEN) Getting ID: 0 (XEN) Getting LVT0: 1700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) Booting processor 1/4 eip 8c000 (XEN) Initializing CPU#1 (XEN) masked ExtINT on CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 0 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 2/2 eip 8c000 (XEN) Initializing CPU#2 (XEN) masked ExtINT on CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 3/6 eip 8c000 (XEN) Initializing CPU#3 (XEN) masked ExtINT on CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 2 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 4/1 eip 8c000 (XEN) Initializing CPU#4 (XEN) masked ExtINT on CPU#4 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#4. (XEN) CPU4: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 5/5 eip 8c000 (XEN) Initializing CPU#5 (XEN) masked ExtINT on CPU#5 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#5. (XEN) CPU5: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 6/3 eip 8c000 (XEN) Initializing CPU#6 (XEN) masked ExtINT on CPU#6 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#6. (XEN) CPU6: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 7/7 eip 8c000 (XEN) Initializing CPU#7 (XEN) masked ExtINT on CPU#7 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 3 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#7. (XEN) CPU7: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23, 2-0, 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12, 2-13, 2-14, 2-15, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #1 registers: 24. (XEN) number of IO-APIC #2 registers: 24. (XEN) number of IO-APIC #3 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #1...... (XEN) .... register #00: 01000000 (XEN) ....... : physical APIC id: 01 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 031 01 1 0 0 0 0 0 2 CA (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 30 (XEN) 04 001 01 0 0 0 0 0 1 1 F1 (XEN) 05 001 01 0 0 0 0 0 1 1 38 (XEN) 06 001 01 0 0 0 0 0 1 1 40 (XEN) 07 001 01 0 0 0 0 0 1 1 48 (XEN) 08 001 01 0 0 0 0 0 1 1 50 (XEN) 09 001 01 1 1 0 0 0 1 1 58 (XEN) 0a 001 01 0 0 0 0 0 1 1 60 (XEN) 0b 001 01 0 0 0 0 0 1 1 68 (XEN) 0c 001 01 0 0 0 0 0 1 1 70 (XEN) 0d 001 01 0 0 0 0 0 1 1 78 (XEN) 0e 001 01 0 0 0 0 0 1 1 88 (XEN) 0f 001 01 0 0 0 0 0 1 1 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 071 01 1 0 0 0 0 0 2 8B (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #2...... (XEN) .... register #00: 02000000 (XEN) ....... : physical APIC id: 02 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 00000000 (XEN) ....... : arbitration: 00 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #3...... (XEN) .... register #00: 03000000 (XEN) ....... : physical APIC id: 03 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 03000000 (XEN) ....... : arbitration: 03 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ241 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 2833.4260 MHz. (XEN) ..... host bus clock speed is 333.3441 MHz. (XEN) ..... bus_scale = 0x00015572 (XEN) checking TSC synchronization across 8 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 8 CPUs (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) ACPI sleep modes: S3 (XEN) MCA: Machine check polling timer started. (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:0.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.2 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.3 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.4 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:11.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.1 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.3 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.0 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.0 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.1 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.1 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.2 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.2 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.3 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.3 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.4 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.4 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.5 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.5 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.6 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.6 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.7 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.7 -> 0:1e.0 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = e:0.0 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = f:0.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 11:6.0 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 11:6.0 -> 10:0.3 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 60:0.0 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff77000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff76000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff75000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff74000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x262438 (XEN) elf_parse_binary: phdr: paddr=0xc0363000 memsz=0x1055fc (XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc04685fc (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xc0000000 (XEN) elf_xen_parse_note: ENTRY = 0xc0100000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc0101000 (XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000 (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse: using notes from SHT_NOTE section (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xc0000000 (XEN) elf_paddr_offset = 0xc0000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xc0100000 (XEN) virt_kend = 0xc04685fc (XEN) virt_entry = 0xc0100000 (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04685fc (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04685fc (XEN) Init. ramdisk: c0469000->c1070e00 (XEN) Phys-Mach map: c1071000->c1171000 (XEN) Start info: c1171000->c1171474 (XEN) Page tables: c1172000->c1181000 (XEN) Boot stack: c1181000->c1182000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 8 VCPUs (XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0362438 (XEN) elf_load_binary: phdr 1 at 0xc0363000 -> 0xc03fc9e4 (XEN) Scrubbing Free RAM: ..............................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) (XEN) Freed 96kB init memory. Linux version 2.6.18.8-xen (root@debian) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP Wed Jul 30 15:07:12 CEST 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active found SMP MP-table at 000fe700 DMI 2.5 present.>>> ERROR: Invalid checksumACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47 ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48]) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Detected 2833.676 MHz processor. Built 1 zonelists. Total pages: 264192 Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0 console=ttyS0,115200,8n1 pciback.hide=(''0f:0.0'') Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 2833.432 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: c1b45000 - c5b45000 Address size: 27 bits vmalloc area: ee000000-f51fe000, maxmem 2d7fe000 Memory: 954152k/1056768k available (2104k kernel code, 93664k reserved, 728k data, 196k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5668.36 BogoMIPS (lpj=28341813) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Checking ''hlt'' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 ENABLING IO-APIC IRQs SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Brought up 8 CPUs Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K migration_cost=11520 checking if image is initramfs... it is Freeing initrd memory: 12319k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init (XEN) io_apic.c:2228: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! pnp: PnP ACPI: found 18 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a report pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0e: ioport range 0x400-0x41f has been reserved pnp: 00:0e: ioport range 0x420-0x43f has been reserved pnp: 00:0e: ioport range 0x440-0x45f has been reserved pnp: 00:0e: ioport range 0x460-0x47f could not be reserved pnp: 00:0e: ioport range 0x480-0x48f has been reserved pnp: 00:0e: ioport range 0x490-0x49f has been reserved pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved pciback: Error parsing pci_devs_to_hide at "(''0f:0.0'')" PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:60:00.0 PCI: Bridge: 0000:00:05.0 IO window: 1000-1fff MEM window: f0000000-f1ffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:1e:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:1e:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:00.3 IO window: 2000-2fff MEM window: f2000000-f20fffff PREFETCH window: f2600000-f27fffff PCI: Bridge: 0000:00:09.0 IO window: 2000-2fff MEM window: f2000000-f21fffff PREFETCH window: f2600000-f27fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f2300000-f23fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: f2200000-f22fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: f2400000-f24fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 24 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 26 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 28 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 32 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:1e:00.0[A] -> GSI 32 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:1e:01.0[A] -> GSI 46 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 22 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com> audit: initializing netlink socket (disabled) audit(1217426482.084:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Floppy drive(s): fd0 is 1.44M floppy0: Unable to grab DMA2 for the floppy driver FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx (XEN) PCI add device 00:1f.1 (XEN) PCI remove device 00:1f.1 (XEN) PCI add device 00:1f.2 (XEN) PCI remove device 00:1f.2 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 NET: Registered protocol family 17 (XEN) platform_hypercall.c:183: Domain 0 says that IO-APIC REGSEL is good Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 196k freed input: AT Translated Set 2 keyboard as /class/input/input0 vga16fb: mapped to 0xf55b6000 fb0: VGA16 VGA frame buffer device ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HPQOEM] OemTableId [ CPU_TM2] [20060707] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) ACPI: Processor [CPU4] (supports 8 throttling states) ACPI: Processor [CPU5] (supports 8 throttling states) ACPI: Processor [CPU6] (supports 8 throttling states) ACPI: Processor [CPU7] (supports 8 throttling states) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 (XEN) PCI add device 00:1d.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SAS Host driver 3.04.01 (XEN) PCI add device 00:1d.1 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 23, io base 0x00003020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 (XEN) PCI add device 00:1d.2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 24 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 24, io base 0x00003040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected (XEN) PCI add device 00:1d.3 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 25 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 25, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected (XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) PCI add device 00:1f.2 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 23 ata1: SATA max UDMA/133 cmd 0x30D0 ctl 0x30EA bmdma 0x30B0 irq 23 ata2: SATA max UDMA/133 cmd 0x30D8 ctl 0x30EE bmdma 0x30B8 irq 23 scsi0 : ata_piix ata1.00: ATAPI, max UDMA/100 ata1.00: configured for UDMA/100 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x30DF Vendor: ASUS Model: DVD-E616A3T Rev: BP08 Type: CD-ROM ANSI SCSI revision: 05 (XEN) PCI add device 00:1d.7 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf2504000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected (XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.1 (XEN) PCI add device 00:1f.1 ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 22 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:pio, hdb:pio (XEN) PCI add device 01:05.0 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f2404000-f24047ff] Max Packet=[2048] IR/IT contexts=[4/8] (XEN) PCI add device 0e:00.0 tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 21 eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express) 10/100/1000BaseT Ethernet 00:1c:c4:88:0c:98 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] (XEN) PCI add device 0f:00.0 ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ 22 eth1: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express) 10/100/1000BaseT Ethernet 00:1c:c4:88:0c:97 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] (XEN) PCI add device 11:06.0 ACPI: PCI Interrupt 0000:11:06.0[A] -> GSI 62 (level, low) -> IRQ 26 mptbase: Initiating ioc0 bringup udev: renamed network interface eth0 to eth17 udev: renamed network interface eth1 to eth19 ioc0: SAS1068: Capabilities={Initiator} (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0xa0 [<c024e265>] evtchn_do_upcall+0xc5/0x1e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c0108d5b>] raw_safe_halt+0x9b/0x110 [<c01047a9>] xen_idle+0x29/0x60 [<c01036e1>] cpu_idle+0x71/0xd0 [<c03cc843>] start_kernel+0x3a3/0x470 [<c03cc230>] unknown_bootoption+0x0/0x270 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c0130100>] lock_timer_base+0x20/0x50 [<c027f7b0>] i8042_timer_func+0x0/0x10 [<c0130244>] __mod_timer+0xa4/0xd0 [<c0130100>] lock_timer_base+0x20/0x50 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0xa0 [<c024e265>] evtchn_do_upcall+0xc5/0x1e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c0108d5b>] raw_safe_halt+0x9b/0x110 [<c01047a9>] xen_idle+0x29/0x60 [<c01036e1>] cpu_idle+0x71/0xd0 [<c03cc843>] start_kernel+0x3a3/0x470 [<c03cc230>] unknown_bootoption+0x0/0x270 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! scsi2 : ioc0: LSISAS1068, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=26 (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c011d629>] __wake_up_common+0x39/0x70 [<c0130100>] lock_timer_base+0x20/0x50 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0xa0 [<c024e265>] evtchn_do_upcall+0xc5/0x1e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c0108d5b>] raw_safe_halt+0x9b/0x110 [<c01047a9>] xen_idle+0x29/0x60 [<c01036e1>] cpu_idle+0x71/0xd0 [<c03cc843>] start_kernel+0x3a3/0x470 [<c03cc230>] unknown_bootoption+0x0/0x270 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0x Mit freundlichen GrьЯen / Best Regards Stefan Mitov Siemens AG Healthcare Sector MED CO CHS CS Mozartstr. 57 91052 Erlangen, Germany Tel.: +49 (9131) 84-722433 Fax: +49 (9131) 84-2978 stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com> Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme; Vorstand: Peter Lцscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger, Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jьrgen Radomski, Erich R. Reinhardt, Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin und Mьnchen; Registergericht: Berlin Charlottenburg, HRB 12300, Mьnchen, HRB 6684; WEEE-Reg.-Nr. DE 23691322 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Cui, Dexuan
2008-Jul-31 02:49 UTC
RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164
Hi Stefan, Can you try the latest xen-unstable tree (changeset 18178: 21dd1fdb73d8)? Changeset 18173: b9edc4627944 might fix the issue you meet with. And please attach the log files of "lspci -tv" and "lspci -xxxx -vvv". BTW, for xen 3.3, do you notice the issue recently? Can you find the recent workable c/s in 3.3 on your platform? Thanks, -- Dexuan ________________________________ From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Han, Weidong Sent: 2008年7月31日 10:16 To: Mitov, Stefan; Keir Fraser Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner Subject: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen 3.3,changeset 18164 Hi Stefan, The page fault (REASON 2) indicates the present (P) field of context entry is clear. That means it didn''t map context for the device (11:06.0). However, there is "(XEN) PCI add device 11:06.0" in the log, it should map context for the device. Can you add a check in intel_iommu_add_device() to see whether map context for device (11:06.0)? In our several testing platforms, we didn''t meet this issue. Can you attach the output of lspci -v? Did you run Xen 3.2.1 on the latest BIOS? If Xen 3.2.1 can work on the same environment, it may be related to dom0 add/remove device hypercall mechanism. Randy (Weidong) ________________________________ From: Mitov, Stefan [mailto:stefan.mitov@siemens.com] Sent: 2008年7月30日 20:26 To: Han, Weidong; Keir Fraser Cc: xen-devel@lists.xensource.com; Handfest, Werner; Azem, Gassan Subject: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164 Hi all, i''m using the unstable version of Xen 3.3, changeset 18164. I''m trying to do some performance measurements of network adapters. Without enabling vt-d features on my HP xw8600 i have no problems to start dom0 and some domU. But when i set the parameter "iommu=1" i can not boot even the dom0. It occurs a Primary Pending Fault by DMA Write request. I''m using the latest BIOS version (01.24 Rev.a) of the HP machine. Previously i used vt-d on the same architecture with Xen 3.2.1 and it worked very fine. I''ve added a log output from the serial console. Some suggestions from you? (XEN) Xen version 3.3.0-rc2-pre (root@) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Wed Jul 30 13:24:27 CEST 2008 (XEN) Latest ChangeSet: Tue Jul 29 13:27:29 2008 +0100 18164:b0ee5e8613e9 (XEN) Command line: iommu=1 com1=115200,8n1 console=com1 apic_verbosity=debug vga numa=on xenheap_megabytes=64 noreboot dom0_mem=min:512M,max:2048M,1024M loglvl=all guest_loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 000000000009ec00 - 00000000000a0000 (reserved) (XEN) 00000000000e8000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cffc2840 (usable) (XEN) 00000000cffc2840 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000130000000 (usable) (XEN) System RAM: 4095MB (4193664kB) (XEN) ACPI: RSDP 000E9810, 0024 (r2 HPQOEM) (XEN) ACPI: XSDT CFFC52EC, 006C (r1 HPQOEM SLIC-WKS 20080701 0) (XEN) ACPI: FACP CFFC5494, 00F4 (r3 HPQOEM SEABURG 1 0) (XEN) ACPI Error (tbfadt-0455): 32/64X address mismatch in "Gpe0Block": [0000F828] [000000000001F030], using 64X [20070126] (XEN) ACPI: DSDT CFFC5A7A, 26A4 (r1 HPQOEM DSDT 1 MSFT 100000E) (XEN) ACPI: FACS CFFC5200, 0040 (XEN) ACPI: SSDT CFFC811E, 701D (r1 HPQOEM PROJECT 1 MSFT 100000E) (XEN) ACPI: APIC CFFC5588, 00D4 (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: ASF! CFFC565C, 006A (r32 HPQOEM SEABURG 1 0) (XEN) ACPI: MCFG CFFC585E, 003C (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: SLIC CFFC589A, 0176 (r1 HPQOEM SLIC-WKS 1 0) (XEN) ACPI: HPET CFFC5A10, 0038 (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: TCPA CFFC5A48, 0032 (r1 HPQOEM SEABURG 1 0) (XEN) ACPI: DMAR CFFC56C6, 0120 (r1 HPQOEM SEABURG 1 0) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000130000000 (XEN) Xen heap: 9MB (9640kB) (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fe700 (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0xf808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0] (XEN) ACPI: wakeup_vec[cffc520c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) (XEN) Processor #5 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) (XEN) Processor #3 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) (XEN) Processor #7 7:7 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47 (XEN) ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48]) (XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) [VT-D]dmar.c:435: Host address width 36 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe710000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:1.0 sec = 80 sub = 80 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe712000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:3.0 sec = a0 sub = a0 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe714000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:5.0 sec = 60 sub = 60 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe719000 (XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:9.0 sec = 10 sub = 40 (XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD (XEN) [VT-D]dmar.c:317: dmaru->address = fe718000 (XEN) [VT-D]dmar.c:326: found INCLUDE_ALL (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.0 (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.1 (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.2 (XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR (XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.3 (XEN) Intel VT-d has been enabled (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to fffdf000 (fee00000) (XEN) mapped IOAPIC to fffde000 (fec00000) (XEN) mapped IOAPIC to fffdd000 (fec89000) (XEN) mapped IOAPIC to fffdc000 (fec88000) (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2833.483 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) HVM: VMX enabled (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Getting VERSION: 50014 (XEN) Getting VERSION: 50014 (XEN) Getting ID: 0 (XEN) Getting LVT0: 1700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) Booting processor 1/4 eip 8c000 (XEN) Initializing CPU#1 (XEN) masked ExtINT on CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 0 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 2/2 eip 8c000 (XEN) Initializing CPU#2 (XEN) masked ExtINT on CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 3/6 eip 8c000 (XEN) Initializing CPU#3 (XEN) masked ExtINT on CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 2 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 4/1 eip 8c000 (XEN) Initializing CPU#4 (XEN) masked ExtINT on CPU#4 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#4. (XEN) CPU4: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 5/5 eip 8c000 (XEN) Initializing CPU#5 (XEN) masked ExtINT on CPU#5 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#5. (XEN) CPU5: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 6/3 eip 8c000 (XEN) Initializing CPU#6 (XEN) masked ExtINT on CPU#6 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#6. (XEN) CPU6: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Booting processor 7/7 eip 8c000 (XEN) Initializing CPU#7 (XEN) masked ExtINT on CPU#7 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 1 (XEN) CPU: Processor Core ID: 3 (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#7. (XEN) CPU7: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06 (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23, 2-0, 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12, 2-13, 2-14, 2-15, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #1 registers: 24. (XEN) number of IO-APIC #2 registers: 24. (XEN) number of IO-APIC #3 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #1...... (XEN) .... register #00: 01000000 (XEN) ....... : physical APIC id: 01 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 031 01 1 0 0 0 0 0 2 CA (XEN) 01 001 01 0 0 0 0 0 1 1 28 (XEN) 02 001 01 0 0 0 0 0 1 1 F0 (XEN) 03 001 01 0 0 0 0 0 1 1 30 (XEN) 04 001 01 0 0 0 0 0 1 1 F1 (XEN) 05 001 01 0 0 0 0 0 1 1 38 (XEN) 06 001 01 0 0 0 0 0 1 1 40 (XEN) 07 001 01 0 0 0 0 0 1 1 48 (XEN) 08 001 01 0 0 0 0 0 1 1 50 (XEN) 09 001 01 1 1 0 0 0 1 1 58 (XEN) 0a 001 01 0 0 0 0 0 1 1 60 (XEN) 0b 001 01 0 0 0 0 0 1 1 68 (XEN) 0c 001 01 0 0 0 0 0 1 1 70 (XEN) 0d 001 01 0 0 0 0 0 1 1 78 (XEN) 0e 001 01 0 0 0 0 0 1 1 88 (XEN) 0f 001 01 0 0 0 0 0 1 1 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 071 01 1 0 0 0 0 0 2 8B (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #2...... (XEN) .... register #00: 02000000 (XEN) ....... : physical APIC id: 02 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 00000000 (XEN) ....... : arbitration: 00 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) IO APIC #3...... (XEN) .... register #00: 03000000 (XEN) ....... : physical APIC id: 03 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 03000000 (XEN) ....... : arbitration: 03 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ241 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 2833.4260 MHz. (XEN) ..... host bus clock speed is 333.3441 MHz. (XEN) ..... bus_scale = 0x00015572 (XEN) checking TSC synchronization across 8 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 8 CPUs (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) ACPI sleep modes: S3 (XEN) MCA: Machine check polling timer started. (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:0.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.2 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.3 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.4 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:11.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.1 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.2 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.3 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.7 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.1 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.0 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.0 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.1 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.1 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.2 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.2 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.3 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.3 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.4 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.4 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.5 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.5 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.6 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.6 -> 0:1e.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.7 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.7 -> 0:1e.0 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = e:0.0 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = f:0.0 (XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 11:6.0 (XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 11:6.0 -> 10:0.3 (XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 60:0.0 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff77000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff76000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff75000 (XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff74000 (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x262438 (XEN) elf_parse_binary: phdr: paddr=0xc0363000 memsz=0x1055fc (XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc04685fc (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xc0000000 (XEN) elf_xen_parse_note: ENTRY = 0xc0100000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc0101000 (XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000 (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse: using notes from SHT_NOTE section (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xc0000000 (XEN) elf_paddr_offset = 0xc0000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xc0100000 (XEN) virt_kend = 0xc04685fc (XEN) virt_entry = 0xc0100000 (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04685fc (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04685fc (XEN) Init. ramdisk: c0469000->c1070e00 (XEN) Phys-Mach map: c1071000->c1171000 (XEN) Start info: c1171000->c1171474 (XEN) Page tables: c1172000->c1181000 (XEN) Boot stack: c1181000->c1182000 (XEN) TOTAL: c0000000->c1400000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 8 VCPUs (XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0362438 (XEN) elf_load_binary: phdr 1 at 0xc0363000 -> 0xc03fc9e4 (XEN) Scrubbing Free RAM: ..............................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) (XEN) Freed 96kB init memory. Linux version 2.6.18.8-xen (root@debian) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP Wed Jul 30 15:07:12 CEST 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000040800000 (usable) 304MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active found SMP MP-table at 000fe700 DMI 2.5 present.>>> ERROR: Invalid checksumACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47 ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48]) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Detected 2833.676 MHz processor. Built 1 zonelists. Total pages: 264192 Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0 console=ttyS0,115200,8n1 pciback.hide=(''0f:0.0'') Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 2833.432 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: c1b45000 - c5b45000 Address size: 27 bits vmalloc area: ee000000-f51fe000, maxmem 2d7fe000 Memory: 954152k/1056768k available (2104k kernel code, 93664k reserved, 728k data, 196k init, 311304k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5668.36 BogoMIPS (lpj=28341813) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Checking ''hlt'' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 ENABLING IO-APIC IRQs SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#4 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#5 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K Brought up 8 CPUs Initializing CPU#7 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K migration_cost=11520 checking if image is initramfs... it is Freeing initrd memory: 12319k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init (XEN) io_apic.c:2228: (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! pnp: PnP ACPI: found 18 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a report pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0e: ioport range 0x400-0x41f has been reserved pnp: 00:0e: ioport range 0x420-0x43f has been reserved pnp: 00:0e: ioport range 0x440-0x45f has been reserved pnp: 00:0e: ioport range 0x460-0x47f could not be reserved pnp: 00:0e: ioport range 0x480-0x48f has been reserved pnp: 00:0e: ioport range 0x490-0x49f has been reserved pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved pciback: Error parsing pci_devs_to_hide at "(''0f:0.0'')" PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:60:00.0 PCI: Bridge: 0000:00:05.0 IO window: 1000-1fff MEM window: f0000000-f1ffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:1e:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:1e:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:00.3 IO window: 2000-2fff MEM window: f2000000-f20fffff PREFETCH window: f2600000-f27fffff PCI: Bridge: 0000:00:09.0 IO window: 2000-2fff MEM window: f2000000-f21fffff PREFETCH window: f2600000-f27fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f2300000-f23fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: f2200000-f22fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: f2400000-f24fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 24 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 26 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 28 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 32 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:1e:00.0[A] -> GSI 32 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:1e:01.0[A] -> GSI 46 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 21 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 22 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com> audit: initializing netlink socket (disabled) audit(1217426482.084:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Floppy drive(s): fd0 is 1.44M floppy0: Unable to grab DMA2 for the floppy driver FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx (XEN) PCI add device 00:1f.1 (XEN) PCI remove device 00:1f.1 (XEN) PCI add device 00:1f.2 (XEN) PCI remove device 00:1f.2 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 NET: Registered protocol family 17 (XEN) platform_hypercall.c:183: Domain 0 says that IO-APIC REGSEL is good Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 196k freed input: AT Translated Set 2 keyboard as /class/input/input0 vga16fb: mapped to 0xf55b6000 fb0: VGA16 VGA frame buffer device ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HPQOEM] OemTableId [ CPU_TM2] [20060707] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) ACPI: Processor [CPU4] (supports 8 throttling states) ACPI: Processor [CPU5] (supports 8 throttling states) ACPI: Processor [CPU6] (supports 8 throttling states) ACPI: Processor [CPU7] (supports 8 throttling states) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 (XEN) PCI add device 00:1d.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SAS Host driver 3.04.01 (XEN) PCI add device 00:1d.1 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 23, io base 0x00003020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 (XEN) PCI add device 00:1d.2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 24 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 24, io base 0x00003040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected (XEN) PCI add device 00:1d.3 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 25 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 25, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected (XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.2 (XEN) PCI add device 00:1f.2 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 23 ata1: SATA max UDMA/133 cmd 0x30D0 ctl 0x30EA bmdma 0x30B0 irq 23 ata2: SATA max UDMA/133 cmd 0x30D8 ctl 0x30EE bmdma 0x30B8 irq 23 scsi0 : ata_piix ata1.00: ATAPI, max UDMA/100 ata1.00: configured for UDMA/100 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x30DF Vendor: ASUS Model: DVD-E616A3T Rev: BP08 Type: CD-ROM ANSI SCSI revision: 05 (XEN) PCI add device 00:1d.7 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf2504000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected (XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.1 (XEN) PCI add device 00:1f.1 ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 22 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:pio, hdb:pio (XEN) PCI add device 01:05.0 ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f2404000-f24047ff] Max Packet=[2048] IR/IT contexts=[4/8] (XEN) PCI add device 0e:00.0 tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 21 eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express) 10/100/1000BaseT Ethernet 00:1c:c4:88:0c:98 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] (XEN) PCI add device 0f:00.0 ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ 22 eth1: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express) 10/100/1000BaseT Ethernet 00:1c:c4:88:0c:97 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] (XEN) PCI add device 11:06.0 ACPI: PCI Interrupt 0000:11:06.0[A] -> GSI 62 (level, low) -> IRQ 26 mptbase: Initiating ioc0 bringup udev: renamed network interface eth0 to eth17 udev: renamed network interface eth1 to eth19 ioc0: SAS1068: Capabilities={Initiator} (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0xa0 [<c024e265>] evtchn_do_upcall+0xc5/0x1e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c0108d5b>] raw_safe_halt+0x9b/0x110 [<c01047a9>] xen_idle+0x29/0x60 [<c01036e1>] cpu_idle+0x71/0xd0 [<c03cc843>] start_kernel+0x3a3/0x470 [<c03cc230>] unknown_bootoption+0x0/0x270 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c0130100>] lock_timer_base+0x20/0x50 [<c027f7b0>] i8042_timer_func+0x0/0x10 [<c0130244>] __mod_timer+0xa4/0xd0 [<c0130100>] lock_timer_base+0x20/0x50 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0xa0 [<c024e265>] evtchn_do_upcall+0xc5/0x1e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c0108d5b>] raw_safe_halt+0x9b/0x110 [<c01047a9>] xen_idle+0x29/0x60 [<c01036e1>] cpu_idle+0x71/0xd0 [<c03cc843>] start_kernel+0x3a3/0x470 [<c03cc230>] unknown_bootoption+0x0/0x270 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! scsi2 : ioc0: LSISAS1068, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=26 (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c011d629>] __wake_up_common+0x39/0x70 [<c0130100>] lock_timer_base+0x20/0x50 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0xa0 [<c024e265>] evtchn_do_upcall+0xc5/0x1e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c0108d5b>] raw_safe_halt+0x9b/0x110 [<c01047a9>] xen_idle+0x29/0x60 [<c01036e1>] cpu_idle+0x71/0xd0 [<c03cc843>] start_kernel+0x3a3/0x470 [<c03cc230>] unknown_bootoption+0x0/0x270 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)! mptbase: Initiating ioc0 recovery (XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000 (XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault (XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2 iommu->reg = fff78000 BUG: soft lockup detected on CPU#0! [<c0151479>] softlockup_tick+0x99/0xe0 [<c01098ca>] timer_interrupt+0x30a/0x6e0 [<c0105c0d>] hypervisor_callback+0x3d/0x45 [<c01306cc>] run_timer_softirq+0x9c/0x1f0 [<c01517f3>] handle_IRQ_event+0x33/0xb0 [<c0151913>] __do_IRQ+0xa3/0x120 [<c010779f>] do_IRQ+0x3f/0x Mit freundlichen GrьЯen / Best Regards Stefan Mitov Siemens AG Healthcare Sector MED CO CHS CS Mozartstr. 57 91052 Erlangen, Germany Tel.: +49 (9131) 84-722433 Fax: +49 (9131) 84-2978 stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com> Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme; Vorstand: Peter Lцscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger, Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jьrgen Radomski, Erich R. Reinhardt, Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin und Mьnchen; Registergericht: Berlin Charlottenburg, HRB 12300, Mьnchen, HRB 6684; WEEE-Reg.-Nr. DE 23691322 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Cui, Dexuan
2008-Aug-05 10:40 UTC
RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164
"Error: pci: PCI Backend does not own device 0000:0f:00." -- this
looks like a mis-configuration issue.
I notice in Boot_5.8_xen_3.3.TXT, you use
pciback.hide=('0f:00.00').
Can you use
pciback.hide=(0f:00.00)
instead (namely, remove the 2 single quotation marks)?
-- Dexuan
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年8月5日 17:09
To: Cui, Dexuan; Han, Weidong; Keir Fraser; xen-devel@lists.xensource.com
Cc: Azem, Gassan; Handfest, Werner
Subject: AW: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi folks,
i'm sorry that i reply a little bit late but i had many things to do. So, i
found what was the reason for the write page fault. I used a SATA hard disk,
which was connected to the SAS controller on the mainboard. You can see the
description of the SAS controller in the both lspci* files,which i added to the
mail. It stays behind a PCIe to PCI/x bridge and this can be the problem. After
i repluged the SATA cable in the right SATA controler and i turned off the SAS
controller in the BIOS, i get the write page fault no more.
Now i'm using the latest xen 3.3 with changeset 18233. I'm trying to
hide the BroadCom PCIe network adapter, but dom0 is not able to unbind it and i
get the message:
Error: pci: PCI Backend does not own device 0000:0f:00.0
See the pciback.hide kernel command-line parameter or
bind your slot/device to the PCI backend using sysfs
I also added my grub configuration and the serial console output. How do you
thing, what can be the reason for this ussue
Mit freundlichen Grüßen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Löscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jürgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB
6684; WEEE-Reg.-Nr. DE 23691322
________________________________
Von: Cui, Dexuan [mailto:dexuan.cui@intel.com]
Gesendet: Donnerstag, 31. Juli 2008 04:50
An: Han, Weidong; Mitov, Stefan; Keir Fraser
Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner
Betreff: RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi Stefan,
Can you try the latest xen-unstable tree (changeset 18178: 21dd1fdb73d8)?
Changeset 18173: b9edc4627944 might fix the issue you meet with.
And please attach the log files of "lspci -tv" and "lspci -xxxx
-vvv".
BTW, for xen 3.3, do you notice the issue recently? Can you find the recent
workable c/s in 3.3 on your platform?
Thanks,
-- Dexuan
________________________________
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Han, Weidong
Sent: 2008年7月31日 10:16
To: Mitov, Stefan; Keir Fraser
Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner
Subject: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi Stefan,
The page fault (REASON 2) indicates the present (P) field of context entry is
clear. That means it didn't map context for the device (11:06.0). However,
there is "(XEN) PCI add device 11:06.0" in the log, it should map
context for the device. Can you add a check in intel_iommu_add_device() to see
whether map context for device (11:06.0)?
In our several testing platforms, we didn't meet this issue. Can you attach
the output of lspci -v?
Did you run Xen 3.2.1 on the latest BIOS? If Xen 3.2.1 can work on the same
environment, it may be related to dom0 add/remove device hypercall mechanism.
Randy (Weidong)
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年7月30日 20:26
To: Han, Weidong; Keir Fraser
Cc: xen-devel@lists.xensource.com; Handfest, Werner; Azem, Gassan
Subject: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164
Hi all,
i'm using the unstable version of Xen 3.3, changeset 18164. I'm trying
to do some performance measurements of network adapters. Without enabling vt-d
features on my HP xw8600 i have no problems to start dom0 and some domU. But
when i set the parameter "iommu=1" i can not boot even the dom0. It
occurs a Primary Pending Fault by DMA Write request. I'm using the latest
BIOS version (01.24 Rev.a) of the HP machine. Previously i used vt-d on the same
architecture with Xen 3.2.1 and it worked very fine. I've added a log output
from the serial console.
Some suggestions from you?
(XEN) Xen version 3.3.0-rc2-pre (root@) (gcc version 4.1.2 20061115 (prerelease)
(Debian 4.1.1-21)) Wed Jul 30 13:24:27 CEST 2008
(XEN) Latest ChangeSet: Tue Jul 29 13:27:29 2008 +0100 18164:b0ee5e8613e9
(XEN) Command line: iommu=1 com1=115200,8n1 console=com1 apic_verbosity=debug
vga numa=on xenheap_megabytes=64 noreboot dom0_mem=min:512M,max:2048M,1024M
loglvl=all guest_loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e8000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cffc2840 (usable)
(XEN) 00000000cffc2840 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) System RAM: 4095MB (4193664kB)
(XEN) ACPI: RSDP 000E9810, 0024 (r2 HPQOEM)
(XEN) ACPI: XSDT CFFC52EC, 006C (r1 HPQOEM SLIC-WKS 20080701 0)
(XEN) ACPI: FACP CFFC5494, 00F4 (r3 HPQOEM SEABURG 1 0)
(XEN) ACPI Error (tbfadt-0455): 32/64X address mismatch in
"Gpe0Block": [0000F828] [000000000001F030], using 64X [20070126]
(XEN) ACPI: DSDT CFFC5A7A, 26A4 (r1 HPQOEM DSDT 1 MSFT 100000E)
(XEN) ACPI: FACS CFFC5200, 0040
(XEN) ACPI: SSDT CFFC811E, 701D (r1 HPQOEM PROJECT 1 MSFT 100000E)
(XEN) ACPI: APIC CFFC5588, 00D4 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: ASF! CFFC565C, 006A (r32 HPQOEM SEABURG 1 0)
(XEN) ACPI: MCFG CFFC585E, 003C (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: SLIC CFFC589A, 0176 (r1 HPQOEM SLIC-WKS 1 0)
(XEN) ACPI: HPET CFFC5A10, 0038 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: TCPA CFFC5A48, 0032 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: DMAR CFFC56C6, 0120 (r1 HPQOEM SEABURG 1 0)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000130000000
(XEN) Xen heap: 9MB (9640kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe700
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0xf808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
(XEN) ACPI: wakeup_vec[cffc520c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:7 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) [VT-D]dmar.c:435: Host address width 36
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe710000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:1.0 sec = 80 sub = 80
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe712000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:3.0 sec = a0 sub = a0
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe714000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:5.0 sec = 60 sub = 60
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe719000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:9.0 sec = 10 sub = 40
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe718000
(XEN) [VT-D]dmar.c:326: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.3
(XEN) Intel VT-d has been enabled
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fffdf000 (fee00000)
(XEN) mapped IOAPIC to fffde000 (fec00000)
(XEN) mapped IOAPIC to fffdd000 (fec89000)
(XEN) mapped IOAPIC to fffdc000 (fec88000)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2833.483 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 1700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) Booting processor 1/4 eip 8c000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 3/6 eip 8c000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 4/1 eip 8c000
(XEN) Initializing CPU#4
(XEN) masked ExtINT on CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 5/5 eip 8c000
(XEN) Initializing CPU#5
(XEN) masked ExtINT on CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 6/3 eip 8c000
(XEN) Initializing CPU#6
(XEN) masked ExtINT on CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) masked ExtINT on CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23,
2-0, 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12, 2-13, 2-14,
2-15, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4,
3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18,
3-19, 3-20, 3-21, 3-22, 3-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #1 registers: 24.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #1......
(XEN) .... register #00: 01000000
(XEN) ....... : physical APIC id: 01
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 031 01 1 0 0 0 0 0 2 CA
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 1 1 0 0 0 1 1 58
(XEN) 0a 001 01 0 0 0 0 0 1 1 60
(XEN) 0b 001 01 0 0 0 0 0 1 1 68
(XEN) 0c 001 01 0 0 0 0 0 1 1 70
(XEN) 0d 001 01 0 0 0 0 0 1 1 78
(XEN) 0e 001 01 0 0 0 0 0 1 1 88
(XEN) 0f 001 01 0 0 0 0 0 1 1 90
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 071 01 1 0 0 0 0 0 2 8B
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #2......
(XEN) .... register #00: 02000000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 2833.4260 MHz.
(XEN) ..... host bus clock speed is 333.3441 MHz.
(XEN) ..... bus_scale = 0x00015572
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 8 CPUs
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:0.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.3
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.4
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:11.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.1
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.3
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.0
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.0 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.1
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.1 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.2
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.2 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.3
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.3 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.4
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.4 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.5
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.5 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.6
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.6 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.7
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.7 ->
0:1e.0
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = e:0.0
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = f:0.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 11:6.0
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 11:6.0 ->
10:0.3
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 60:0.0
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff77000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff76000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff75000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff74000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x262438
(XEN) elf_parse_binary: phdr: paddr=0xc0363000 memsz=0x1055fc
(XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc04685fc
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xc0000000
(XEN) elf_xen_parse_note: ENTRY = 0xc0100000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc0101000
(XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000
(XEN) elf_xen_parse_note: FEATURES =
"writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse: using notes from SHT_NOTE section
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xc0000000
(XEN) elf_paddr_offset = 0xc0000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xc0100000
(XEN) virt_kend = 0xc04685fc
(XEN) virt_entry = 0xc0100000
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04685fc
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04685fc
(XEN) Init. ramdisk: c0469000->c1070e00
(XEN) Phys-Mach map: c1071000->c1171000
(XEN) Start info: c1171000->c1171474
(XEN) Page tables: c1172000->c1181000
(XEN) Boot stack: c1181000->c1182000
(XEN) TOTAL: c0000000->c1400000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0362438
(XEN) elf_load_binary: phdr 1 at 0xc0363000 -> 0xc03fc9e4
(XEN) Scrubbing Free RAM: ..............................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 96kB init memory.
Linux version 2.6.18.8-xen (root@debian) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #2 SMP Wed Jul 30 15:07:12 CEST 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
304MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
found SMP MP-table at 000fe700
DMI 2.5 present.
>>> ERROR: Invalid checksum
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Detected 2833.676 MHz processor.
Built 1 zonelists. Total pages: 264192
Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0
console=ttyS0,115200,8n1 pciback.hide=('0f:0.0')
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2833.432 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: c1b45000 - c5b45000
Address size: 27 bits
vmalloc area: ee000000-f51fe000, maxmem 2d7fe000
Memory: 954152k/1056768k available (2104k kernel code, 93664k reserved, 728k
data, 196k init, 311304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5668.36 BogoMIPS (lpj=28341813)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Brought up 8 CPUs
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
migration_cost=11520
checking if image is initramfs... it is
Freeing initrd memory: 12319k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) io_apic.c:2228:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 18 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0e: ioport range 0x400-0x41f has been reserved
pnp: 00:0e: ioport range 0x420-0x43f has been reserved
pnp: 00:0e: ioport range 0x440-0x45f has been reserved
pnp: 00:0e: ioport range 0x460-0x47f could not be reserved
pnp: 00:0e: ioport range 0x480-0x48f has been reserved
pnp: 00:0e: ioport range 0x490-0x49f has been reserved
pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
pciback: Error parsing pci_devs_to_hide at "('0f:0.0')"
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:60:00.0
PCI: Bridge: 0000:00:05.0
IO window: 1000-1fff
MEM window: f0000000-f1ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:1e:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:1e:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:10:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:10:00.3
IO window: 2000-2fff
MEM window: f2000000-f20fffff
PREFETCH window: f2600000-f27fffff
PCI: Bridge: 0000:00:09.0
IO window: 2000-2fff
MEM window: f2000000-f21fffff
PREFETCH window: f2600000-f27fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f2300000-f23fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f2200000-f22fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f2400000-f24fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 24 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 26 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 28 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:1e:00.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:1e:01.0[A] -> GSI 46 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 22
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1217426482.084:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Floppy drive(s): fd0 is 1.44M
floppy0: Unable to grab DMA2 for the floppy driver
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as xvc0
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
(XEN) PCI add device 00:1f.1
(XEN) PCI remove device 00:1f.1
(XEN) PCI add device 00:1f.2
(XEN) PCI remove device 00:1f.2
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
(XEN) platform_hypercall.c:183: Domain 0 says that IO-APIC REGSEL is good
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
vga16fb: mapped to 0xf55b6000
fb0: VGA16 VGA frame buffer device
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HPQOEM] OemTableId [ CPU_TM2]
[20060707]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
ACPI: Processor [CPU4] (supports 8 throttling states)
ACPI: Processor [CPU5] (supports 8 throttling states)
ACPI: Processor [CPU6] (supports 8 throttling states)
ACPI: Processor [CPU7] (supports 8 throttling states)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
(XEN) PCI add device 00:1d.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.01
(XEN) PCI add device 00:1d.1
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00003020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
(XEN) PCI add device 00:1d.2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 24
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 24, io base 0x00003040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.3
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 25
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 25, io base 0x00003060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
(XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) PCI add device 00:1f.2
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 23
ata1: SATA max UDMA/133 cmd 0x30D0 ctl 0x30EA bmdma 0x30B0 irq 23
ata2: SATA max UDMA/133 cmd 0x30D8 ctl 0x30EE bmdma 0x30B8 irq 23
scsi0 : ata_piix
ata1.00: ATAPI, max UDMA/100
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x30DF
Vendor: ASUS Model: DVD-E616A3T Rev: BP08
Type: CD-ROM ANSI SCSI revision: 05
(XEN) PCI add device 00:1d.7
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf2504000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
(XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.1
(XEN) PCI add device 00:1f.1
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 22
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:pio, hdb:pio
(XEN) PCI add device 01:05.0
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f2404000-f24047ff] Max
Packet=[2048] IR/IT contexts=[4/8]
(XEN) PCI add device 0e:00.0
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 21
eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express)
10/100/1000BaseT Ethernet 00:1c:c4:88:0c:98
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
(XEN) PCI add device 0f:00.0
ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ 22
eth1: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express)
10/100/1000BaseT Ethernet 00:1c:c4:88:0c:97
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
(XEN) PCI add device 11:06.0
ACPI: PCI Interrupt 0000:11:06.0[A] -> GSI 62 (level, low) -> IRQ 26
mptbase: Initiating ioc0 bringup
udev: renamed network interface eth0 to eth17
udev: renamed network interface eth1 to eth19
ioc0: SAS1068: Capabilities={Initiator}
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c0130100>] lock_timer_base+0x20/0x50
[<c027f7b0>] i8042_timer_func+0x0/0x10
[<c0130244>] __mod_timer+0xa4/0xd0
[<c0130100>] lock_timer_base+0x20/0x50
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi2 : ioc0: LSISAS1068, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=26
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c011d629>] __wake_up_common+0x39/0x70
[<c0130100>] lock_timer_base+0x20/0x50
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0x
Mit freundlichen GrьЯen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Lцscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jьrgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und Mьnchen; Registergericht: Berlin Charlottenburg, HRB 12300, Mьnchen, HRB
6684; WEEE-Reg.-Nr. DE 23691322
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Cui, Dexuan
2008-Aug-06 10:03 UTC
[Xen-devel] RE: Unknown pciback.hide boot option in lastest changeset 18242
I can't reproduce the issue in my side.
It's really weird... Looks the setting is ok. (Please ensure the devices
0f:00.0 and 80:00.0 do exist in your platform)
Maybe you can try finding the recently workable changeset and locate which c/s
caused the issue?
-- Dexuan
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年8月6日 17:19
To: Cui, Dexuan; Handfest, Werner; Han, Weidong
Cc: Keir Fraser; xen-devel@lists.xensource.com
Subject: Unknown pciback.hide boot option in lastest changeset 18242
Hi Dexuan,
the pci error was because of single quotation marks. I realy didn't saw
them. After fix the marks, i was able to start the domain.
Now there is another issue on the latest Xen 4.0.0-rc3 with changeset 18242. The
boot option pciback.hide is unknonw anymore. Did you change something in the
configuration and assigning of VT-d in the latest changeset?
Here is the log output which i get:
Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0
console=ttyS0,115200,8n1 pciback.hide=(0f:00.00)(80:00.0) apic=debug
Unknown boot option `pciback.hide=(0f:00.00)(80:00.0)': ignoring
Exactly same configuration worked fine before i checked out the latest
changeset. I attached the whole log from the serial console.
Mit freundlichen Grüßen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Löscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jürgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB
6684; WEEE-Reg.-Nr. DE 23691322
________________________________
Von: Cui, Dexuan [mailto:dexuan.cui@intel.com]
Gesendet: Dienstag, 5. August 2008 12:41
An: Mitov, Stefan; Han, Weidong; Keir Fraser; xen-devel@lists.xensource.com
Cc: Azem, Gassan; Handfest, Werner
Betreff: RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
"Error: pci: PCI Backend does not own device 0000:0f:00." -- this
looks like a mis-configuration issue.
I notice in Boot_5.8_xen_3.3.TXT, you use
pciback.hide=('0f:00.00').
Can you use
pciback.hide=(0f:00.00)
instead (namely, remove the 2 single quotation marks)?
-- Dexuan
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年8月5日 17:09
To: Cui, Dexuan; Han, Weidong; Keir Fraser; xen-devel@lists.xensource.com
Cc: Azem, Gassan; Handfest, Werner
Subject: AW: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi folks,
i'm sorry that i reply a little bit late but i had many things to do. So, i
found what was the reason for the write page fault. I used a SATA hard disk,
which was connected to the SAS controller on the mainboard. You can see the
description of the SAS controller in the both lspci* files,which i added to the
mail. It stays behind a PCIe to PCI/x bridge and this can be the problem. After
i repluged the SATA cable in the right SATA controler and i turned off the SAS
controller in the BIOS, i get the write page fault no more.
Now i'm using the latest xen 3.3 with changeset 18233. I'm trying to
hide the BroadCom PCIe network adapter, but dom0 is not able to unbind it and i
get the message:
Error: pci: PCI Backend does not own device 0000:0f:00.0
See the pciback.hide kernel command-line parameter or
bind your slot/device to the PCI backend using sysfs
I also added my grub configuration and the serial console output. How do you
thing, what can be the reason for this ussue
Mit freundlichen Grüßen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Löscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jürgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB
6684; WEEE-Reg.-Nr. DE 23691322
________________________________
Von: Cui, Dexuan [mailto:dexuan.cui@intel.com]
Gesendet: Donnerstag, 31. Juli 2008 04:50
An: Han, Weidong; Mitov, Stefan; Keir Fraser
Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner
Betreff: RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi Stefan,
Can you try the latest xen-unstable tree (changeset 18178: 21dd1fdb73d8)?
Changeset 18173: b9edc4627944 might fix the issue you meet with.
And please attach the log files of "lspci -tv" and "lspci -xxxx
-vvv".
BTW, for xen 3.3, do you notice the issue recently? Can you find the recent
workable c/s in 3.3 on your platform?
Thanks,
-- Dexuan
________________________________
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Han, Weidong
Sent: 2008年7月31日 10:16
To: Mitov, Stefan; Keir Fraser
Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner
Subject: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi Stefan,
The page fault (REASON 2) indicates the present (P) field of context entry is
clear. That means it didn't map context for the device (11:06.0). However,
there is "(XEN) PCI add device 11:06.0" in the log, it should map
context for the device. Can you add a check in intel_iommu_add_device() to see
whether map context for device (11:06.0)?
In our several testing platforms, we didn't meet this issue. Can you attach
the output of lspci -v?
Did you run Xen 3.2.1 on the latest BIOS? If Xen 3.2.1 can work on the same
environment, it may be related to dom0 add/remove device hypercall mechanism.
Randy (Weidong)
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年7月30日 20:26
To: Han, Weidong; Keir Fraser
Cc: xen-devel@lists.xensource.com; Handfest, Werner; Azem, Gassan
Subject: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164
Hi all,
i'm using the unstable version of Xen 3.3, changeset 18164. I'm trying
to do some performance measurements of network adapters. Without enabling vt-d
features on my HP xw8600 i have no problems to start dom0 and some domU. But
when i set the parameter "iommu=1" i can not boot even the dom0. It
occurs a Primary Pending Fault by DMA Write request. I'm using the latest
BIOS version (01.24 Rev.a) of the HP machine. Previously i used vt-d on the same
architecture with Xen 3.2.1 and it worked very fine. I've added a log output
from the serial console.
Some suggestions from you?
(XEN) Xen version 3.3.0-rc2-pre (root@) (gcc version 4.1.2 20061115 (prerelease)
(Debian 4.1.1-21)) Wed Jul 30 13:24:27 CEST 2008
(XEN) Latest ChangeSet: Tue Jul 29 13:27:29 2008 +0100 18164:b0ee5e8613e9
(XEN) Command line: iommu=1 com1=115200,8n1 console=com1 apic_verbosity=debug
vga numa=on xenheap_megabytes=64 noreboot dom0_mem=min:512M,max:2048M,1024M
loglvl=all guest_loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e8000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cffc2840 (usable)
(XEN) 00000000cffc2840 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) System RAM: 4095MB (4193664kB)
(XEN) ACPI: RSDP 000E9810, 0024 (r2 HPQOEM)
(XEN) ACPI: XSDT CFFC52EC, 006C (r1 HPQOEM SLIC-WKS 20080701 0)
(XEN) ACPI: FACP CFFC5494, 00F4 (r3 HPQOEM SEABURG 1 0)
(XEN) ACPI Error (tbfadt-0455): 32/64X address mismatch in
"Gpe0Block": [0000F828] [000000000001F030], using 64X [20070126]
(XEN) ACPI: DSDT CFFC5A7A, 26A4 (r1 HPQOEM DSDT 1 MSFT 100000E)
(XEN) ACPI: FACS CFFC5200, 0040
(XEN) ACPI: SSDT CFFC811E, 701D (r1 HPQOEM PROJECT 1 MSFT 100000E)
(XEN) ACPI: APIC CFFC5588, 00D4 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: ASF! CFFC565C, 006A (r32 HPQOEM SEABURG 1 0)
(XEN) ACPI: MCFG CFFC585E, 003C (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: SLIC CFFC589A, 0176 (r1 HPQOEM SLIC-WKS 1 0)
(XEN) ACPI: HPET CFFC5A10, 0038 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: TCPA CFFC5A48, 0032 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: DMAR CFFC56C6, 0120 (r1 HPQOEM SEABURG 1 0)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000130000000
(XEN) Xen heap: 9MB (9640kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe700
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0xf808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
(XEN) ACPI: wakeup_vec[cffc520c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:7 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) [VT-D]dmar.c:435: Host address width 36
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe710000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:1.0 sec = 80 sub = 80
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe712000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:3.0 sec = a0 sub = a0
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe714000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:5.0 sec = 60 sub = 60
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe719000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:9.0 sec = 10 sub = 40
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe718000
(XEN) [VT-D]dmar.c:326: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.3
(XEN) Intel VT-d has been enabled
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fffdf000 (fee00000)
(XEN) mapped IOAPIC to fffde000 (fec00000)
(XEN) mapped IOAPIC to fffdd000 (fec89000)
(XEN) mapped IOAPIC to fffdc000 (fec88000)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2833.483 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 1700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) Booting processor 1/4 eip 8c000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 3/6 eip 8c000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 4/1 eip 8c000
(XEN) Initializing CPU#4
(XEN) masked ExtINT on CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 5/5 eip 8c000
(XEN) Initializing CPU#5
(XEN) masked ExtINT on CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 6/3 eip 8c000
(XEN) Initializing CPU#6
(XEN) masked ExtINT on CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) masked ExtINT on CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23,
2-0, 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12, 2-13, 2-14,
2-15, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4,
3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18,
3-19, 3-20, 3-21, 3-22, 3-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #1 registers: 24.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #1......
(XEN) .... register #00: 01000000
(XEN) ....... : physical APIC id: 01
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 031 01 1 0 0 0 0 0 2 CA
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 1 1 0 0 0 1 1 58
(XEN) 0a 001 01 0 0 0 0 0 1 1 60
(XEN) 0b 001 01 0 0 0 0 0 1 1 68
(XEN) 0c 001 01 0 0 0 0 0 1 1 70
(XEN) 0d 001 01 0 0 0 0 0 1 1 78
(XEN) 0e 001 01 0 0 0 0 0 1 1 88
(XEN) 0f 001 01 0 0 0 0 0 1 1 90
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 071 01 1 0 0 0 0 0 2 8B
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #2......
(XEN) .... register #00: 02000000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 2833.4260 MHz.
(XEN) ..... host bus clock speed is 333.3441 MHz.
(XEN) ..... bus_scale = 0x00015572
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 8 CPUs
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:0.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.3
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.4
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:11.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.1
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.3
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.0
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.0 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.1
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.1 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.2
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.2 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.3
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.3 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.4
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.4 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.5
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.5 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.6
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.6 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.7
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.7 ->
0:1e.0
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = e:0.0
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = f:0.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 11:6.0
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 11:6.0 ->
10:0.3
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 60:0.0
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff77000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff76000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff75000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff74000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x262438
(XEN) elf_parse_binary: phdr: paddr=0xc0363000 memsz=0x1055fc
(XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc04685fc
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xc0000000
(XEN) elf_xen_parse_note: ENTRY = 0xc0100000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc0101000
(XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000
(XEN) elf_xen_parse_note: FEATURES =
"writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse: using notes from SHT_NOTE section
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xc0000000
(XEN) elf_paddr_offset = 0xc0000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xc0100000
(XEN) virt_kend = 0xc04685fc
(XEN) virt_entry = 0xc0100000
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04685fc
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04685fc
(XEN) Init. ramdisk: c0469000->c1070e00
(XEN) Phys-Mach map: c1071000->c1171000
(XEN) Start info: c1171000->c1171474
(XEN) Page tables: c1172000->c1181000
(XEN) Boot stack: c1181000->c1182000
(XEN) TOTAL: c0000000->c1400000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0362438
(XEN) elf_load_binary: phdr 1 at 0xc0363000 -> 0xc03fc9e4
(XEN) Scrubbing Free RAM: ..............................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 96kB init memory.
Linux version 2.6.18.8-xen (root@debian) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #2 SMP Wed Jul 30 15:07:12 CEST 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
304MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
found SMP MP-table at 000fe700
DMI 2.5 present.
>>> ERROR: Invalid checksum
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Detected 2833.676 MHz processor.
Built 1 zonelists. Total pages: 264192
Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0
console=ttyS0,115200,8n1 pciback.hide=('0f:0.0')
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2833.432 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: c1b45000 - c5b45000
Address size: 27 bits
vmalloc area: ee000000-f51fe000, maxmem 2d7fe000
Memory: 954152k/1056768k available (2104k kernel code, 93664k reserved, 728k
data, 196k init, 311304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5668.36 BogoMIPS (lpj=28341813)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Brought up 8 CPUs
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
migration_cost=11520
checking if image is initramfs... it is
Freeing initrd memory: 12319k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) io_apic.c:2228:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 18 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0e: ioport range 0x400-0x41f has been reserved
pnp: 00:0e: ioport range 0x420-0x43f has been reserved
pnp: 00:0e: ioport range 0x440-0x45f has been reserved
pnp: 00:0e: ioport range 0x460-0x47f could not be reserved
pnp: 00:0e: ioport range 0x480-0x48f has been reserved
pnp: 00:0e: ioport range 0x490-0x49f has been reserved
pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
pciback: Error parsing pci_devs_to_hide at "('0f:0.0')"
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:60:00.0
PCI: Bridge: 0000:00:05.0
IO window: 1000-1fff
MEM window: f0000000-f1ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:1e:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:1e:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:10:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:10:00.3
IO window: 2000-2fff
MEM window: f2000000-f20fffff
PREFETCH window: f2600000-f27fffff
PCI: Bridge: 0000:00:09.0
IO window: 2000-2fff
MEM window: f2000000-f21fffff
PREFETCH window: f2600000-f27fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f2300000-f23fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f2200000-f22fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f2400000-f24fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 24 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 26 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 28 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:1e:00.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:1e:01.0[A] -> GSI 46 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 22
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1217426482.084:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Floppy drive(s): fd0 is 1.44M
floppy0: Unable to grab DMA2 for the floppy driver
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as xvc0
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
(XEN) PCI add device 00:1f.1
(XEN) PCI remove device 00:1f.1
(XEN) PCI add device 00:1f.2
(XEN) PCI remove device 00:1f.2
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
(XEN) platform_hypercall.c:183: Domain 0 says that IO-APIC REGSEL is good
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
vga16fb: mapped to 0xf55b6000
fb0: VGA16 VGA frame buffer device
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HPQOEM] OemTableId [ CPU_TM2]
[20060707]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
ACPI: Processor [CPU4] (supports 8 throttling states)
ACPI: Processor [CPU5] (supports 8 throttling states)
ACPI: Processor [CPU6] (supports 8 throttling states)
ACPI: Processor [CPU7] (supports 8 throttling states)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
(XEN) PCI add device 00:1d.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.01
(XEN) PCI add device 00:1d.1
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00003020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
(XEN) PCI add device 00:1d.2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 24
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 24, io base 0x00003040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.3
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 25
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 25, io base 0x00003060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
(XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) PCI add device 00:1f.2
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 23
ata1: SATA max UDMA/133 cmd 0x30D0 ctl 0x30EA bmdma 0x30B0 irq 23
ata2: SATA max UDMA/133 cmd 0x30D8 ctl 0x30EE bmdma 0x30B8 irq 23
scsi0 : ata_piix
ata1.00: ATAPI, max UDMA/100
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x30DF
Vendor: ASUS Model: DVD-E616A3T Rev: BP08
Type: CD-ROM ANSI SCSI revision: 05
(XEN) PCI add device 00:1d.7
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf2504000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
(XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.1
(XEN) PCI add device 00:1f.1
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 22
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:pio, hdb:pio
(XEN) PCI add device 01:05.0
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f2404000-f24047ff] Max
Packet=[2048] IR/IT contexts=[4/8]
(XEN) PCI add device 0e:00.0
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 21
eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express)
10/100/1000BaseT Ethernet 00:1c:c4:88:0c:98
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
(XEN) PCI add device 0f:00.0
ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ 22
eth1: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express)
10/100/1000BaseT Ethernet 00:1c:c4:88:0c:97
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
(XEN) PCI add device 11:06.0
ACPI: PCI Interrupt 0000:11:06.0[A] -> GSI 62 (level, low) -> IRQ 26
mptbase: Initiating ioc0 bringup
udev: renamed network interface eth0 to eth17
udev: renamed network interface eth1 to eth19
ioc0: SAS1068: Capabilities={Initiator}
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c0130100>] lock_timer_base+0x20/0x50
[<c027f7b0>] i8042_timer_func+0x0/0x10
[<c0130244>] __mod_timer+0xa4/0xd0
[<c0130100>] lock_timer_base+0x20/0x50
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi2 : ioc0: LSISAS1068, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=26
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c011d629>] __wake_up_common+0x39/0x70
[<c0130100>] lock_timer_base+0x20/0x50
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0x
Mit freundlichen GrьЯen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Lцscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jьrgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und Mьnchen; Registergericht: Berlin Charlottenburg, HRB 12300, Mьnchen, HRB
6684; WEEE-Reg.-Nr. DE 23691322
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Li, Haicheng
2008-Aug-06 14:39 UTC
RE: [Xen-devel] RE: Unknown pciback.hide boot option in lastestchangeset 18242
besides, make sure pciback is built into your dom0 kernel not just built as a
module.
-- haicheng
________________________________
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Cui, Dexuan
Sent: 2008年8月6日 18:04
To: Mitov, Stefan; Handfest, Werner; Han, Weidong
Cc: xen-devel@lists.xensource.com; Keir Fraser
Subject: [Xen-devel] RE: Unknown pciback.hide boot option in lastestchangeset
18242
I can't reproduce the issue in my side.
It's really weird... Looks the setting is ok. (Please ensure the devices
0f:00.0 and 80:00.0 do exist in your platform)
Maybe you can try finding the recently workable changeset and locate which c/s
caused the issue?
-- Dexuan
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年8月6日 17:19
To: Cui, Dexuan; Handfest, Werner; Han, Weidong
Cc: Keir Fraser; xen-devel@lists.xensource.com
Subject: Unknown pciback.hide boot option in lastest changeset 18242
Hi Dexuan,
the pci error was because of single quotation marks. I realy didn't saw
them. After fix the marks, i was able to start the domain.
Now there is another issue on the latest Xen 4.0.0-rc3 with changeset 18242. The
boot option pciback.hide is unknonw anymore. Did you change something in the
configuration and assigning of VT-d in the latest changeset?
Here is the log output which i get:
Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0
console=ttyS0,115200,8n1 pciback.hide=(0f:00.00)(80:00.0) apic=debug
Unknown boot option `pciback.hide=(0f:00.00)(80:00.0)': ignoring
Exactly same configuration worked fine before i checked out the latest
changeset. I attached the whole log from the serial console.
Mit freundlichen Grüßen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Löscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jürgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB
6684; WEEE-Reg.-Nr. DE 23691322
________________________________
Von: Cui, Dexuan [mailto:dexuan.cui@intel.com]
Gesendet: Dienstag, 5. August 2008 12:41
An: Mitov, Stefan; Han, Weidong; Keir Fraser; xen-devel@lists.xensource.com
Cc: Azem, Gassan; Handfest, Werner
Betreff: RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
"Error: pci: PCI Backend does not own device 0000:0f:00." -- this
looks like a mis-configuration issue.
I notice in Boot_5.8_xen_3.3.TXT, you use
pciback.hide=('0f:00.00').
Can you use
pciback.hide=(0f:00.00)
instead (namely, remove the 2 single quotation marks)?
-- Dexuan
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年8月5日 17:09
To: Cui, Dexuan; Han, Weidong; Keir Fraser; xen-devel@lists.xensource.com
Cc: Azem, Gassan; Handfest, Werner
Subject: AW: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi folks,
i'm sorry that i reply a little bit late but i had many things to do. So, i
found what was the reason for the write page fault. I used a SATA hard disk,
which was connected to the SAS controller on the mainboard. You can see the
description of the SAS controller in the both lspci* files,which i added to the
mail. It stays behind a PCIe to PCI/x bridge and this can be the problem. After
i repluged the SATA cable in the right SATA controler and i turned off the SAS
controller in the BIOS, i get the write page fault no more.
Now i'm using the latest xen 3.3 with changeset 18233. I'm trying to
hide the BroadCom PCIe network adapter, but dom0 is not able to unbind it and i
get the message:
Error: pci: PCI Backend does not own device 0000:0f:00.0
See the pciback.hide kernel command-line parameter or
bind your slot/device to the PCI backend using sysfs
I also added my grub configuration and the serial console output. How do you
thing, what can be the reason for this ussue
Mit freundlichen Grüßen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Löscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jürgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und München; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB
6684; WEEE-Reg.-Nr. DE 23691322
________________________________
Von: Cui, Dexuan [mailto:dexuan.cui@intel.com]
Gesendet: Donnerstag, 31. Juli 2008 04:50
An: Han, Weidong; Mitov, Stefan; Keir Fraser
Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner
Betreff: RE: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi Stefan,
Can you try the latest xen-unstable tree (changeset 18178: 21dd1fdb73d8)?
Changeset 18173: b9edc4627944 might fix the issue you meet with.
And please attach the log files of "lspci -tv" and "lspci -xxxx
-vvv".
BTW, for xen 3.3, do you notice the issue recently? Can you find the recent
workable c/s in 3.3 on your platform?
Thanks,
-- Dexuan
________________________________
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Han, Weidong
Sent: 2008年7月31日 10:16
To: Mitov, Stefan; Keir Fraser
Cc: Azem, Gassan; xen-devel@lists.xensource.com; Handfest, Werner
Subject: [Xen-devel] RE: DMA Write Page Fault by using vt-d with Xen
3.3,changeset 18164
Hi Stefan,
The page fault (REASON 2) indicates the present (P) field of context entry is
clear. That means it didn't map context for the device (11:06.0). However,
there is "(XEN) PCI add device 11:06.0" in the log, it should map
context for the device. Can you add a check in intel_iommu_add_device() to see
whether map context for device (11:06.0)?
In our several testing platforms, we didn't meet this issue. Can you attach
the output of lspci -v?
Did you run Xen 3.2.1 on the latest BIOS? If Xen 3.2.1 can work on the same
environment, it may be related to dom0 add/remove device hypercall mechanism.
Randy (Weidong)
________________________________
From: Mitov, Stefan [mailto:stefan.mitov@siemens.com]
Sent: 2008年7月30日 20:26
To: Han, Weidong; Keir Fraser
Cc: xen-devel@lists.xensource.com; Handfest, Werner; Azem, Gassan
Subject: DMA Write Page Fault by using vt-d with Xen 3.3, changeset 18164
Hi all,
i'm using the unstable version of Xen 3.3, changeset 18164. I'm trying
to do some performance measurements of network adapters. Without enabling vt-d
features on my HP xw8600 i have no problems to start dom0 and some domU. But
when i set the parameter "iommu=1" i can not boot even the dom0. It
occurs a Primary Pending Fault by DMA Write request. I'm using the latest
BIOS version (01.24 Rev.a) of the HP machine. Previously i used vt-d on the same
architecture with Xen 3.2.1 and it worked very fine. I've added a log output
from the serial console.
Some suggestions from you?
(XEN) Xen version 3.3.0-rc2-pre (root@) (gcc version 4.1.2 20061115 (prerelease)
(Debian 4.1.1-21)) Wed Jul 30 13:24:27 CEST 2008
(XEN) Latest ChangeSet: Tue Jul 29 13:27:29 2008 +0100 18164:b0ee5e8613e9
(XEN) Command line: iommu=1 com1=115200,8n1 console=com1 apic_verbosity=debug
vga numa=on xenheap_megabytes=64 noreboot dom0_mem=min:512M,max:2048M,1024M
loglvl=all guest_loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e8000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cffc2840 (usable)
(XEN) 00000000cffc2840 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) System RAM: 4095MB (4193664kB)
(XEN) ACPI: RSDP 000E9810, 0024 (r2 HPQOEM)
(XEN) ACPI: XSDT CFFC52EC, 006C (r1 HPQOEM SLIC-WKS 20080701 0)
(XEN) ACPI: FACP CFFC5494, 00F4 (r3 HPQOEM SEABURG 1 0)
(XEN) ACPI Error (tbfadt-0455): 32/64X address mismatch in
"Gpe0Block": [0000F828] [000000000001F030], using 64X [20070126]
(XEN) ACPI: DSDT CFFC5A7A, 26A4 (r1 HPQOEM DSDT 1 MSFT 100000E)
(XEN) ACPI: FACS CFFC5200, 0040
(XEN) ACPI: SSDT CFFC811E, 701D (r1 HPQOEM PROJECT 1 MSFT 100000E)
(XEN) ACPI: APIC CFFC5588, 00D4 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: ASF! CFFC565C, 006A (r32 HPQOEM SEABURG 1 0)
(XEN) ACPI: MCFG CFFC585E, 003C (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: SLIC CFFC589A, 0176 (r1 HPQOEM SLIC-WKS 1 0)
(XEN) ACPI: HPET CFFC5A10, 0038 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: TCPA CFFC5A48, 0032 (r1 HPQOEM SEABURG 1 0)
(XEN) ACPI: DMAR CFFC56C6, 0120 (r1 HPQOEM SEABURG 1 0)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000130000000
(XEN) Xen heap: 9MB (9640kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe700
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0xf808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
(XEN) ACPI: wakeup_vec[cffc520c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:7 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) [VT-D]dmar.c:435: Host address width 36
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe710000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:1.0 sec = 80 sub = 80
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe712000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:3.0 sec = a0 sub = a0
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe714000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:5.0 sec = 60 sub = 60
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe719000
(XEN) [VT-D]dmar.c:252: found bridge: bdf = 0:9.0 sec = 10 sub = 40
(XEN) [VT-D]dmar.c:444: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:317: dmaru->address = fe718000
(XEN) [VT-D]dmar.c:326: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:448: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:266: found endpoint: bdf = 0:1d.3
(XEN) Intel VT-d has been enabled
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fffdf000 (fee00000)
(XEN) mapped IOAPIC to fffde000 (fec00000)
(XEN) mapped IOAPIC to fffdd000 (fec89000)
(XEN) mapped IOAPIC to fffdc000 (fec88000)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2833.483 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 1700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) Booting processor 1/4 eip 8c000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 3/6 eip 8c000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 4/1 eip 8c000
(XEN) Initializing CPU#4
(XEN) masked ExtINT on CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 5/5 eip 8c000
(XEN) Initializing CPU#5
(XEN) masked ExtINT on CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 6/3 eip 8c000
(XEN) Initializing CPU#6
(XEN) masked ExtINT on CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) masked ExtINT on CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23,
2-0, 2-1, 2-2, 2-3, 2-4, 2-5, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12, 2-13, 2-14,
2-15, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4,
3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18,
3-19, 3-20, 3-21, 3-22, 3-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #1 registers: 24.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #1......
(XEN) .... register #00: 01000000
(XEN) ....... : physical APIC id: 01
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 031 01 1 0 0 0 0 0 2 CA
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 1 1 0 0 0 1 1 58
(XEN) 0a 001 01 0 0 0 0 0 1 1 60
(XEN) 0b 001 01 0 0 0 0 0 1 1 68
(XEN) 0c 001 01 0 0 0 0 0 1 1 70
(XEN) 0d 001 01 0 0 0 0 0 1 1 78
(XEN) 0e 001 01 0 0 0 0 0 1 1 88
(XEN) 0f 001 01 0 0 0 0 0 1 1 90
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 071 01 1 0 0 0 0 0 2 8B
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #2......
(XEN) .... register #00: 02000000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 2833.4260 MHz.
(XEN) ..... host bus clock speed is 333.3441 MHz.
(XEN) ..... bus_scale = 0x00015572
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 8 CPUs
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1709: Queued Invalidation hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) [VT-D]iommu.c:1717: Interrupt Remapping hardware not found
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:0.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.3
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:10.4
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:11.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:15.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:16.1
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.3
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.1
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.0
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.0 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.1
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.1 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.2
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.2 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.3
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.3 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.4
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.4 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.5
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.5 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.6
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.6 ->
0:1e.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 1:5.7
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 1:5.7 ->
0:1e.0
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = e:0.0
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = f:0.0
(XEN) [VT-D]iommu.c:1259:d32767 domain_context_mapping:PCI: bdf = 11:6.0
(XEN) [VT-D]iommu.c:1272:d32767 domain_context_mapping:map: bdf = 11:6.0 ->
10:0.3
(XEN) [VT-D]iommu.c:1252:d32767 domain_context_mapping:PCIe: bdf = 60:0.0
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff77000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff76000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff75000
(XEN) [VT-D]iommu.c:664: iommu_enable_translation: iommu->reg = fff74000
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x262438
(XEN) elf_parse_binary: phdr: paddr=0xc0363000 memsz=0x1055fc
(XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc04685fc
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xc0000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xc0000000
(XEN) elf_xen_parse_note: ENTRY = 0xc0100000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xc0101000
(XEN) elf_xen_parse_note: HV_START_LOW = 0xf5800000
(XEN) elf_xen_parse_note: FEATURES =
"writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse: using notes from SHT_NOTE section
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xc0000000
(XEN) elf_paddr_offset = 0xc0000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xc0100000
(XEN) virt_kend = 0xc04685fc
(XEN) virt_entry = 0xc0100000
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04685fc
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (253952 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04685fc
(XEN) Init. ramdisk: c0469000->c1070e00
(XEN) Phys-Mach map: c1071000->c1171000
(XEN) Start info: c1171000->c1171474
(XEN) Page tables: c1172000->c1181000
(XEN) Boot stack: c1181000->c1182000
(XEN) TOTAL: c0000000->c1400000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0362438
(XEN) elf_load_binary: phdr 1 at 0xc0363000 -> 0xc03fc9e4
(XEN) Scrubbing Free RAM: ..............................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 96kB init memory.
Linux version 2.6.18.8-xen (root@debian) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #2 SMP Wed Jul 30 15:07:12 CEST 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000040800000 (usable)
304MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
found SMP MP-table at 000fe700
DMI 2.5 present.
>>> ERROR: Invalid checksum
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec89000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec88000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec88000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Detected 2833.676 MHz processor.
Built 1 zonelists. Total pages: 264192
Kernel command line: root=/dev/sda2 ro splash=silent showopts console=tty0
console=ttyS0,115200,8n1 pciback.hide=('0f:0.0')
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2833.432 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: c1b45000 - c5b45000
Address size: 27 bits
vmalloc area: ee000000-f51fe000, maxmem 2d7fe000
Memory: 954152k/1056768k available (2104k kernel code, 93664k reserved, 728k
data, 196k init, 311304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5668.36 BogoMIPS (lpj=28341813)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#4
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#5
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Initializing CPU#6
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
Brought up 8 CPUs
Initializing CPU#7
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
migration_cost=11520
checking if image is initramfs... it is
Freeing initrd memory: 12319k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) io_apic.c:2228:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 18 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0e: ioport range 0x400-0x41f has been reserved
pnp: 00:0e: ioport range 0x420-0x43f has been reserved
pnp: 00:0e: ioport range 0x440-0x45f has been reserved
pnp: 00:0e: ioport range 0x460-0x47f could not be reserved
pnp: 00:0e: ioport range 0x480-0x48f has been reserved
pnp: 00:0e: ioport range 0x490-0x49f has been reserved
pnp: 00:0e: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
pciback: Error parsing pci_devs_to_hide at "('0f:0.0')"
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:60:00.0
PCI: Bridge: 0000:00:05.0
IO window: 1000-1fff
MEM window: f0000000-f1ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:1e:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:1e:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:10:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:10:00.3
IO window: 2000-2fff
MEM window: f2000000-f20fffff
PREFETCH window: f2600000-f27fffff
PCI: Bridge: 0000:00:09.0
IO window: 2000-2fff
MEM window: f2000000-f21fffff
PREFETCH window: f2600000-f27fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f2300000-f23fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f2200000-f22fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f2400000-f24fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 24 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 26 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 28 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:1e:00.0[A] -> GSI 32 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:1e:01.0[A] -> GSI 46 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 22
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1217426482.084:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Floppy drive(s): fd0 is 1.44M
floppy0: Unable to grab DMA2 for the floppy driver
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as xvc0
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
(XEN) PCI add device 00:1f.1
(XEN) PCI remove device 00:1f.1
(XEN) PCI add device 00:1f.2
(XEN) PCI remove device 00:1f.2
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
(XEN) platform_hypercall.c:183: Domain 0 says that IO-APIC REGSEL is good
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
vga16fb: mapped to 0xf55b6000
fb0: VGA16 VGA frame buffer device
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HPQOEM] OemTableId [ CPU_TM2]
[20060707]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
ACPI: Processor [CPU4] (supports 8 throttling states)
ACPI: Processor [CPU5] (supports 8 throttling states)
ACPI: Processor [CPU6] (supports 8 throttling states)
ACPI: Processor [CPU7] (supports 8 throttling states)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
(XEN) PCI add device 00:1d.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00003000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SAS Host driver 3.04.01
(XEN) PCI add device 00:1d.1
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00003020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
(XEN) PCI add device 00:1d.2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 24
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 24, io base 0x00003040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
(XEN) PCI add device 00:1d.3
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 25
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 25, io base 0x00003060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
(XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) PCI add device 00:1f.2
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 23
ata1: SATA max UDMA/133 cmd 0x30D0 ctl 0x30EA bmdma 0x30B0 irq 23
ata2: SATA max UDMA/133 cmd 0x30D8 ctl 0x30EE bmdma 0x30B8 irq 23
scsi0 : ata_piix
ata1.00: ATAPI, max UDMA/100
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x30DF
Vendor: ASUS Model: DVD-E616A3T Rev: BP08
Type: CD-ROM ANSI SCSI revision: 05
(XEN) PCI add device 00:1d.7
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf2504000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
(XEN) [VT-D]iommu.c:1259:d0 domain_context_mapping:PCI: bdf = 0:1f.1
(XEN) PCI add device 00:1f.1
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 22
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:pio, hdb:pio
(XEN) PCI add device 01:05.0
ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f2404000-f24047ff] Max
Packet=[2048] IR/IT contexts=[4/8]
(XEN) PCI add device 0e:00.0
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:0e:00.0[A] -> GSI 16 (level, low) -> IRQ 21
eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express)
10/100/1000BaseT Ethernet 00:1c:c4:88:0c:98
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
(XEN) PCI add device 0f:00.0
ACPI: PCI Interrupt 0000:0f:00.0[A] -> GSI 17 (level, low) -> IRQ 22
eth1: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI Express)
10/100/1000BaseT Ethernet 00:1c:c4:88:0c:97
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
(XEN) PCI add device 11:06.0
ACPI: PCI Interrupt 0000:11:06.0[A] -> GSI 62 (level, low) -> IRQ 26
mptbase: Initiating ioc0 bringup
udev: renamed network interface eth0 to eth17
udev: renamed network interface eth1 to eth19
ioc0: SAS1068: Capabilities={Initiator}
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c0130100>] lock_timer_base+0x20/0x50
[<c027f7b0>] i8042_timer_func+0x0/0x10
[<c0130244>] __mod_timer+0xa4/0xd0
[<c0130100>] lock_timer_base+0x20/0x50
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
scsi2 : ioc0: LSISAS1068, FwRev=01160100h, Ports=1, MaxQ=286, IRQ=26
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c011d629>] __wake_up_common+0x39/0x70
[<c0130100>] lock_timer_base+0x20/0x50
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0xa0
[<c024e265>] evtchn_do_upcall+0xc5/0x1e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c0108d5b>] raw_safe_halt+0x9b/0x110
[<c01047a9>] xen_idle+0x29/0x60
[<c01036e1>] cpu_idle+0x71/0xd0
[<c03cc843>] start_kernel+0x3a3/0x470
[<c03cc230>] unknown_bootoption+0x0/0x270
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
mptbase: mpt_reply: WARNING - ioc0: Invalid cb_idx (0)!
mptbase: Initiating ioc0 recovery
(XEN) [VT-D]iommu.c:766: iommu_page_fault: iommu->reg = fff78000
(XEN) [VT-D]iommu.c:738: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:720: iommu_fault:DMA Write: 11:6.0 addr 119680000 REASON 2
iommu->reg = fff78000
BUG: soft lockup detected on CPU#0!
[<c0151479>] softlockup_tick+0x99/0xe0
[<c01098ca>] timer_interrupt+0x30a/0x6e0
[<c0105c0d>] hypervisor_callback+0x3d/0x45
[<c01306cc>] run_timer_softirq+0x9c/0x1f0
[<c01517f3>] handle_IRQ_event+0x33/0xb0
[<c0151913>] __do_IRQ+0xa3/0x120
[<c010779f>] do_IRQ+0x3f/0x
Mit freundlichen GrьЯen / Best Regards
Stefan Mitov
Siemens AG
Healthcare Sector
MED CO CHS CS
Mozartstr. 57
91052 Erlangen, Germany
Tel.: +49 (9131) 84-722433
Fax: +49 (9131) 84-2978
stefan.mitov@siemens.com <mailto:stefan.mitov@siemens.com>
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme;
Vorstand: Peter Lцscher, Vorsitzender; Johannes Feldmayer, Heinrich Hiesinger,
Joe Kaeser, Rudi Lamprecht, Eduardo Montes, Jьrgen Radomski, Erich R. Reinhardt,
Hermann Requardt, Uriel J. Sharef, Klaus Wucherer; Sitz der Gesellschaft: Berlin
und Mьnchen; Registergericht: Berlin Charlottenburg, HRB 12300, Mьnchen, HRB
6684; WEEE-Reg.-Nr. DE 23691322
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel