Ralph Passgang
2008-Jan-11 00:40 UTC
[Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
Hi, I just found that xen 3.1-testing changeset 15577 fails to build on i386 on debian sid/lenny/etch. It seems to compile just fine on amd64/etch. The following happens compiling the 32bit version: [...] gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes -Wno-unused-value -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common -iwithprefix include -Werror -Wno-pointer-arith -pipe -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/include -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/include/asm-x86/mach-generic -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/include/asm-x86/mach-default -msoft-float -fno-stack-protector -g -D__XEN__ -DACM_SECURITY -c vmx.c -o vmx.o cc1: warnings being treated as errors vmx.c: In function ''vmx_install_vlapic_mapping'': vmx.c:2694: warning: right shift count >= width of type vmx.c:2695: warning: right shift count >= width of type make[8]: *** [vmx.o] Error 1 make[8]: Leaving directory `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/arch/x86/hvm/vmx'' make[7]: *** [vmx/built_in.o] Error 2 [...] The last changeset that I tried and that compiled on i386 was 15564. So the last 13 changesets could be the cause. The following 4 changesets changed the vmx.c, so most likely one of them causes this (but I haven''t looked any further): 15565, 15567, 15571, 15575 Would be great if someone could take a look... Thx, Ralph _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-11 00:54 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it tomorrow. Thanks, Keir On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote:> Hi, > > I just found that xen 3.1-testing changeset 15577 fails to build on i386 on > debian sid/lenny/etch. It seems to compile just fine on amd64/etch. > > The following happens compiling the 32bit version: > [...] > gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG -fno-strict-aliasing > -std=gnu99 -Wall -Wstrict-prototypes -Wno-unused-value > -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common -iwithprefix > include -Werror -Wno-pointer-arith -pipe > -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/incl > ude > -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/incl > ude/asm-x86/mach-generic > -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/incl > ude/asm-x86/mach-default -msoft-float -fno-stack-protector -g -D__XEN__ > -DACM_SECURITY -c > vmx.c -o vmx.o > cc1: warnings being treated as errors > vmx.c: In function ''vmx_install_vlapic_mapping'': > vmx.c:2694: warning: right shift count >= width of type > vmx.c:2695: warning: right shift count >= width of type > make[8]: *** [vmx.o] Error 1 > make[8]: Leaving directory > `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xen/arch/ > x86/hvm/vmx'' > make[7]: *** [vmx/built_in.o] Error 2 > [...] > > The last changeset that I tried and that compiled on i386 was 15564. So the > last 13 changesets could be the cause. The following 4 changesets changed > the vmx.c, so most likely one of them causes this (but I haven''t looked any > further): > > 15565, 15567, 15571, 15575 > > Would be great if someone could take a look... > > Thx, > Ralph > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Ralph Passgang
2008-Jan-14 17:14 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
Hi Keir, xen-3.1-testing.hg still doesn''t compile on i386 for the same reason as in my original report. I know that 3.2 is more important, but it would be nice if the 3.1 branch could get fixed. thx, Ralph Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie:> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it tomorrow. > > Thanks, > Keir > > On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: > > Hi, > > > > I just found that xen 3.1-testing changeset 15577 fails to build on > > i386 on debian sid/lenny/etch. It seems to compile just fine on > > amd64/etch. > > > > The following happens compiling the 32bit version: > > [...] > > gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG > > -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes > > -Wno-unused-value > > -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common > > -iwithprefix include -Werror -Wno-pointer-arith -pipe > > -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/x > >en/incl ude > > -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/x > >en/incl ude/asm-x86/mach-generic > > -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/x > >en/incl ude/asm-x86/mach-default -msoft-float -fno-stack-protector -g > > -D__XEN__ -DACM_SECURITY -c > > vmx.c -o vmx.o > > cc1: warnings being treated as errors > > vmx.c: In function ''vmx_install_vlapic_mapping'': > > vmx.c:2694: warning: right shift count >= width of type > > vmx.c:2695: warning: right shift count >= width of type > > make[8]: *** [vmx.o] Error 1 > > make[8]: Leaving directory > > `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xe > >n/arch/ x86/hvm/vmx'' > > make[7]: *** [vmx/built_in.o] Error 2 > > [...] > > > > The last changeset that I tried and that compiled on i386 was 15564. So > > the last 13 changesets could be the cause. The following 4 changesets > > changed the vmx.c, so most likely one of them causes this (but I > > haven''t looked any further): > > > > 15565, 15567, 15571, 15575 > > > > Would be great if someone could take a look... > > > > Thx, > > Ralph > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-14 17:19 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
It was stuck in the staging tree, which I''ve now pushed manually. K. On 14/1/08 17:14, "Ralph Passgang" <xen@debianbase.de> wrote:> Hi Keir, > > xen-3.1-testing.hg still doesn''t compile on i386 for the same reason as in > my original report. I know that 3.2 is more important, but it would be nice > if the 3.1 branch could get fixed. > > thx, > Ralph > > Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie: >> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it tomorrow. >> >> Thanks, >> Keir >> >> On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: >>> Hi, >>> >>> I just found that xen 3.1-testing changeset 15577 fails to build on >>> i386 on debian sid/lenny/etch. It seems to compile just fine on >>> amd64/etch. >>> >>> The following happens compiling the 32bit version: >>> [...] >>> gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG >>> -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes >>> -Wno-unused-value >>> -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common >>> -iwithprefix include -Werror -Wno-pointer-arith -pipe >>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/x >>> en/incl ude >>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/x >>> en/incl ude/asm-x86/mach-generic >>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/x >>> en/incl ude/asm-x86/mach-default -msoft-float -fno-stack-protector -g >>> -D__XEN__ -DACM_SECURITY -c >>> vmx.c -o vmx.o >>> cc1: warnings being treated as errors >>> vmx.c: In function ''vmx_install_vlapic_mapping'': >>> vmx.c:2694: warning: right shift count >= width of type >>> vmx.c:2695: warning: right shift count >= width of type >>> make[8]: *** [vmx.o] Error 1 >>> make[8]: Leaving directory >>> `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/xe >>> n/arch/ x86/hvm/vmx'' >>> make[7]: *** [vmx/built_in.o] Error 2 >>> [...] >>> >>> The last changeset that I tried and that compiled on i386 was 15564. So >>> the last 13 changesets could be the cause. The following 4 changesets >>> changed the vmx.c, so most likely one of them causes this (but I >>> haven''t looked any further): >>> >>> 15565, 15567, 15571, 15575 >>> >>> Would be great if someone could take a look... >>> >>> Thx, >>> Ralph >>> >>> _______________________________________________ >>> Xen-devel mailing list >>> Xen-devel@lists.xensource.com >>> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Ralph Passgang
2008-Jan-15 03:05 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
Hi Keir, thanks, but it seems that I have just bad news for you. now xen 3.1 (cs 15598) compiles on i386 and amd64 but at least on amd64 the hypervisor hangs at boot. I haven''t tested i386 (besides that it compiles) yet. The last known working changeset for the amd64 hypervisor was 15590. The most important part of the errormessage from the hypervisor: Xen call trace: [<ffff828c8015f00c>] vmx_init_vmcs_config+0x1bc/0x1f0 [<ffff828c80160430>] start_vmx+0x70/0x260 [<ffff828c80146509>] identify_cpu+0xa8/0x200 [<ffff828c801bbce6>] __start_xen+0x1ff6/0x24f0 [<ffff828c801000b5>] __high_start+0xa1/0xa3 Panic on CPU 0: Xen Bug at vmcs.c:159 If more information is needed, let me know. Ralph Am Montag, 14. Januar 2008 18:19:24 schrieb Keir Fraser:> It was stuck in the staging tree, which I''ve now pushed manually. > > K. > > On 14/1/08 17:14, "Ralph Passgang" <xen@debianbase.de> wrote: > > Hi Keir, > > > > xen-3.1-testing.hg still doesn''t compile on i386 for the same reason as > > in my original report. I know that 3.2 is more important, but it would > > be nice if the 3.1 branch could get fixed. > > > > thx, > > Ralph > > > > Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie: > >> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it > >> tomorrow. > >> > >> Thanks, > >> Keir > >> > >> On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: > >>> Hi, > >>> > >>> I just found that xen 3.1-testing changeset 15577 fails to build on > >>> i386 on debian sid/lenny/etch. It seems to compile just fine on > >>> amd64/etch. > >>> > >>> The following happens compiling the 32bit version: > >>> [...] > >>> gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG > >>> -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes > >>> -Wno-unused-value > >>> -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common > >>> -iwithprefix include -Werror -Wno-pointer-arith -pipe > >>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386 > >>>/x en/incl ude > >>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386 > >>>/x en/incl ude/asm-x86/mach-generic > >>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386 > >>>/x en/incl ude/asm-x86/mach-default -msoft-float -fno-stack-protector > >>> -g -D__XEN__ -DACM_SECURITY -c > >>> vmx.c -o vmx.o > >>> cc1: warnings being treated as errors > >>> vmx.c: In function ''vmx_install_vlapic_mapping'': > >>> vmx.c:2694: warning: right shift count >= width of type > >>> vmx.c:2695: warning: right shift count >= width of type > >>> make[8]: *** [vmx.o] Error 1 > >>> make[8]: Leaving directory > >>> `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/ > >>>xe n/arch/ x86/hvm/vmx'' > >>> make[7]: *** [vmx/built_in.o] Error 2 > >>> [...] > >>> > >>> The last changeset that I tried and that compiled on i386 was 15564. > >>> So the last 13 changesets could be the cause. The following 4 > >>> changesets changed the vmx.c, so most likely one of them causes this > >>> (but I haven''t looked any further): > >>> > >>> 15565, 15567, 15571, 15575 > >>> > >>> Would be great if someone could take a look... > >>> > >>> Thx, > >>> Ralph > >>> > >>> _______________________________________________ > >>> Xen-devel mailing list > >>> Xen-devel@lists.xensource.com > >>> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-15 08:17 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
What type of CPU are you running? Is it valid retail silicon? Can you add a line before the line that is crashing: printk("vmx_basic_msr == %08x:%08x\n", vmx_msr_high, vmx_msr_low); BUG_ON(((vmx_msr_high >> 18) & 15) == 6); ...and then tell me what that line prints out immediately before the crash? ''cat /proc/cpuinfo'' from booting Linux on that system might also be interesting, also the CPU vendor/version string printed by Linux in dmesg as it boots. -- Keir On 15/1/08 03:05, "Ralph Passgang" <xen@debianbase.de> wrote:> Hi Keir, > > thanks, but it seems that I have just bad news for you. > > now xen 3.1 (cs 15598) compiles on i386 and amd64 but at least on amd64 the > hypervisor hangs at boot. I haven''t tested i386 (besides that it compiles) > yet. The last known working changeset for the amd64 hypervisor was 15590. > > The most important part of the errormessage from the hypervisor: > > Xen call trace: > [<ffff828c8015f00c>] vmx_init_vmcs_config+0x1bc/0x1f0 > [<ffff828c80160430>] start_vmx+0x70/0x260 > [<ffff828c80146509>] identify_cpu+0xa8/0x200 > [<ffff828c801bbce6>] __start_xen+0x1ff6/0x24f0 > [<ffff828c801000b5>] __high_start+0xa1/0xa3 > > Panic on CPU 0: > Xen Bug at vmcs.c:159 > > If more information is needed, let me know. > > Ralph > > Am Montag, 14. Januar 2008 18:19:24 schrieb Keir Fraser: >> It was stuck in the staging tree, which I''ve now pushed manually. >> >> K. >> >> On 14/1/08 17:14, "Ralph Passgang" <xen@debianbase.de> wrote: >>> Hi Keir, >>> >>> xen-3.1-testing.hg still doesn''t compile on i386 for the same reason as >>> in my original report. I know that 3.2 is more important, but it would >>> be nice if the 3.1 branch could get fixed. >>> >>> thx, >>> Ralph >>> >>> Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie: >>>> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it >>>> tomorrow. >>>> >>>> Thanks, >>>> Keir >>>> >>>> On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: >>>>> Hi, >>>>> >>>>> I just found that xen 3.1-testing changeset 15577 fails to build on >>>>> i386 on debian sid/lenny/etch. It seems to compile just fine on >>>>> amd64/etch. >>>>> >>>>> The following happens compiling the 32bit version: >>>>> [...] >>>>> gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG >>>>> -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes >>>>> -Wno-unused-value >>>>> -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common >>>>> -iwithprefix include -Werror -Wno-pointer-arith -pipe >>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386 >>>>> /x en/incl ude >>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386 >>>>> /x en/incl ude/asm-x86/mach-generic >>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386 >>>>> /x en/incl ude/asm-x86/mach-default -msoft-float -fno-stack-protector >>>>> -g -D__XEN__ -DACM_SECURITY -c >>>>> vmx.c -o vmx.o >>>>> cc1: warnings being treated as errors >>>>> vmx.c: In function ''vmx_install_vlapic_mapping'': >>>>> vmx.c:2694: warning: right shift count >= width of type >>>>> vmx.c:2695: warning: right shift count >= width of type >>>>> make[8]: *** [vmx.o] Error 1 >>>>> make[8]: Leaving directory >>>>> `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i386/ >>>>> xe n/arch/ x86/hvm/vmx'' >>>>> make[7]: *** [vmx/built_in.o] Error 2 >>>>> [...] >>>>> >>>>> The last changeset that I tried and that compiled on i386 was 15564. >>>>> So the last 13 changesets could be the cause. The following 4 >>>>> changesets changed the vmx.c, so most likely one of them causes this >>>>> (but I haven''t looked any further): >>>>> >>>>> 15565, 15567, 15571, 15575 >>>>> >>>>> Would be great if someone could take a look... >>>>> >>>>> Thx, >>>>> Ralph >>>>> >>>>> _______________________________________________ >>>>> Xen-devel mailing list >>>>> Xen-devel@lists.xensource.com >>>>> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Ralph Passgang
2008-Jan-15 11:06 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
Am Dienstag, 15. Januar 2008 09:17:46 schrieben Sie: Hi Keir,> What type of CPU are you running?2x Intel Xeon 5120 (Dual-Core), running the 64bit hypervisor.> Is it valid retail silicon?what do you mean by "valid"? at least xen 3.0.x, and 3.1.x worked on it without any problem before. It seems that just a change between 15590 and 15598 must have broken something. It''s not a dell, hp or ibm branded system, but it''s quite a normal intel-based system. intel board (S5000PSL) intel chipset intel e1000 lan lsi megaraid_sas based sata-controller 8GB RAM> Can you add a line before the line that is crashing: > printk("vmx_basic_msr == %08x:%08x\n", vmx_msr_high, vmx_msr_low); > BUG_ON(((vmx_msr_high >> 18) & 15) == 6); > > ...and then tell me what that line prints out immediately before the > crash?yep, it says: vmx_basic_msr == 001a0400:00000007> > ''cat /proc/cpuinfo'' from booting Linux on that system might also be > interesting,processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping : 6 cpu MHz : 1861.973 cache size : 4096 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm bogomips : 3727.86 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: of course, all the same for processor 0-3 (besides the core id).> also the CPU vendor/version string printed by Linux in dmesg > as it boots.xm dmesg (from the last known running version): Xen version 3.1.3-1 (Debian 3.1.3-0-tha10) (ralph@debianbase.de) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Sat Jan 12 02:22:25 UTC 2008 Latest ChangeSet: changeset:15590:f479c2af0825 (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000de2b4000 (usable) (XEN) 00000000de2b4000 - 00000000de375000 (ACPI NVS) (XEN) 00000000de375000 - 00000000dfa42000 (usable) (XEN) 00000000dfa42000 - 00000000dfa9a000 (reserved) (XEN) 00000000dfa9a000 - 00000000dfad1000 (usable) (XEN) 00000000dfad1000 - 00000000dfb1a000 (ACPI NVS) (XEN) 00000000dfb1a000 - 00000000dfb2a000 (usable) (XEN) 00000000dfb2a000 - 00000000dfb3a000 (ACPI data) (XEN) 00000000dfb3a000 - 00000000dfc00000 (usable) (XEN) 00000000dfc00000 - 00000000f0000000 (reserved) (XEN) 00000000ffe00000 - 00000000ffe0c000 (reserved) (XEN) 0000000100000000 - 0000000220000000 (usable) (XEN) System RAM: 8186MB (8382644kB) (XEN) Xen heap: 14MB (14944kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) Processor #0 6:15 APIC version 20 (XEN) Processor #6 6:15 APIC version 20 (XEN) Processor #1 6:15 APIC version 20 (XEN) Processor #7 6:15 APIC version 20 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1861.973 MHz processor. (XEN) HVM: VMX enabled (XEN) VMX: MSR intercept bitmap enabled (XEN) CPU0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 (XEN) Mapping cpu 0 to node 255 (XEN) Booting processor 1/6 eip 90000 (XEN) Mapping cpu 1 to node 255 (XEN) CPU1: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 (XEN) Booting processor 2/1 eip 90000 (XEN) Mapping cpu 2 to node 255 (XEN) CPU2: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 (XEN) Booting processor 3/7 eip 90000 (XEN) Mapping cpu 3 to node 255 (XEN) CPU3: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer overflows in 14998 jiffies. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 4 CPUs (XEN) acm_init: Loading default policy (NULL). (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0x200000 -> 0x5bc9b0 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000214000000->0000000218000000 (2013303 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805bc9b0 (XEN) Init. ramdisk: ffffffff805bd000->ffffffff814cba00 (XEN) Phys-Mach map: ffffffff814cc000->ffffffff824483b8 (XEN) Start info: ffffffff82449000->ffffffff8244949c (XEN) Page tables: ffffffff8244a000->ffffffff82461000 (XEN) Boot stack: ffffffff82461000->ffffffff82462000 (XEN) TOTAL: ffffffff80000000->ffffffff82800000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 4 VCPUs (XEN) Initrd len 0xf0ea00, start at 0xffffffff805bd000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen). (XEN) Freed 100kB init memory. because the system is half in production use, I cannot run a normal linux kernel (without the xen hypervisor running), but my dom0 kernel says: Linux version 2.6.18-tha2-xen-amd64 (root@s1vX) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Jan 15 04:39:44 UTC 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000001f0077000 (usable) DMI 2.5 present. On node 0 totalpages: 2031735 DMA zone: 2031735 pages, LIFO batch:31 ACPI: RSDP (v002 INTEL ) @ 0x00000000000f03c0 ACPI: XSDT (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ 0x00000000dfb39120 ACPI: FADT (v003 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ 0x00000000dfb37000 ACPI: MADT (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ 0x00000000dfb36000 ACPI: SPCR (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ 0x00000000dfb2f000 ACPI: HPET (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ 0x00000000dfb2e000 ACPI: MCFG (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ 0x00000000dfb2d000 ACPI: OEM1 (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ 0x00000000dfb2c000 ACPI: SSDT (v002 INTEL EIST 0x00004000 INTL 0x01000013) @ 0x00000000dfb2b000 ACPI: SSDT (v002 INTEL IPMI 0x00004000 INTL 0x01000013) @ 0x00000000dfb2a000 ACPI: DSDT (v002 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at f1000000 (gap: f0000000:fe00000) Built 1 zonelists. Total pages: 2031735 Kernel command line: root=/dev/sda1 ro console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1861.973 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: ffff88000b059000 - ffff88000f059000 Address size: 27 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 7876732k/8126940k available (1999k kernel code, 241380k reserved, 890k data, 148k init) Calibrating delay using timer specific routine.. 3727.86 BogoMIPS (lpj=7455721) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 migration_cost=11114 checking if image is initramfs... it is Freeing initrd memory: 15418k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:0e:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC32._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0003 pnp: ACPI device : hid IPI0001 pnp: PnP ACPI: found 13 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub [...] --Ralph> > -- Keir > > On 15/1/08 03:05, "Ralph Passgang" <xen@debianbase.de> wrote: > > Hi Keir, > > > > thanks, but it seems that I have just bad news for you. > > > > now xen 3.1 (cs 15598) compiles on i386 and amd64 but at least on amd64 > > the hypervisor hangs at boot. I haven''t tested i386 (besides that it > > compiles) yet. The last known working changeset for the amd64 > > hypervisor was 15590. > > > > The most important part of the errormessage from the hypervisor: > > > > Xen call trace: > > [<ffff828c8015f00c>] vmx_init_vmcs_config+0x1bc/0x1f0 > > [<ffff828c80160430>] start_vmx+0x70/0x260 > > [<ffff828c80146509>] identify_cpu+0xa8/0x200 > > [<ffff828c801bbce6>] __start_xen+0x1ff6/0x24f0 > > [<ffff828c801000b5>] __high_start+0xa1/0xa3 > > > > Panic on CPU 0: > > Xen Bug at vmcs.c:159 > > > > If more information is needed, let me know. > > > > Ralph > > > > Am Montag, 14. Januar 2008 18:19:24 schrieb Keir Fraser: > >> It was stuck in the staging tree, which I''ve now pushed manually. > >> > >> K. > >> > >> On 14/1/08 17:14, "Ralph Passgang" <xen@debianbase.de> wrote: > >>> Hi Keir, > >>> > >>> xen-3.1-testing.hg still doesn''t compile on i386 for the same reason > >>> as in my original report. I know that 3.2 is more important, but it > >>> would be nice if the 3.1 branch could get fixed. > >>> > >>> thx, > >>> Ralph > >>> > >>> Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie: > >>>> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it > >>>> tomorrow. > >>>> > >>>> Thanks, > >>>> Keir > >>>> > >>>> On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: > >>>>> Hi, > >>>>> > >>>>> I just found that xen 3.1-testing changeset 15577 fails to build on > >>>>> i386 on debian sid/lenny/etch. It seems to compile just fine on > >>>>> amd64/etch. > >>>>> > >>>>> The following happens compiling the 32bit version: > >>>>> [...] > >>>>> gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG > >>>>> -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes > >>>>> -Wno-unused-value > >>>>> -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common > >>>>> -iwithprefix include -Werror -Wno-pointer-arith -pipe > >>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i3 > >>>>>86 /x en/incl ude > >>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i3 > >>>>>86 /x en/incl ude/asm-x86/mach-generic > >>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i3 > >>>>>86 /x en/incl ude/asm-x86/mach-default -msoft-float > >>>>> -fno-stack-protector -g -D__XEN__ -DACM_SECURITY -c > >>>>> vmx.c -o vmx.o > >>>>> cc1: warnings being treated as errors > >>>>> vmx.c: In function ''vmx_install_vlapic_mapping'': > >>>>> vmx.c:2694: warning: right shift count >= width of type > >>>>> vmx.c:2695: warning: right shift count >= width of type > >>>>> make[8]: *** [vmx.o] Error 1 > >>>>> make[8]: Leaving directory > >>>>> `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i38 > >>>>>6/ xe n/arch/ x86/hvm/vmx'' > >>>>> make[7]: *** [vmx/built_in.o] Error 2 > >>>>> [...] > >>>>> > >>>>> The last changeset that I tried and that compiled on i386 was > >>>>> 15564. So the last 13 changesets could be the cause. The following > >>>>> 4 changesets changed the vmx.c, so most likely one of them causes > >>>>> this (but I haven''t looked any further): > >>>>> > >>>>> 15565, 15567, 15571, 15575 > >>>>> > >>>>> Would be great if someone could take a look... > >>>>> > >>>>> Thx, > >>>>> Ralph > >>>>> > >>>>> _______________________________________________ > >>>>> Xen-devel mailing list > >>>>> Xen-devel@lists.xensource.com > >>>>> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-15 11:15 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
Argh, I should also have backported c/s 15527. I''ll do that now, and it will definitely fix this crash for you. Thanks for the extra info! -- Keir On 15/1/08 11:06, "Ralph Passgang" <xen@debianbase.de> wrote:> Am Dienstag, 15. Januar 2008 09:17:46 schrieben Sie: > > Hi Keir, > >> What type of CPU are you running? > > 2x Intel Xeon 5120 (Dual-Core), running the 64bit hypervisor. > >> Is it valid retail silicon? > > what do you mean by "valid"? at least xen 3.0.x, and 3.1.x worked on it > without any problem before. It seems that just a change between 15590 and > 15598 must have broken something. > > It''s not a dell, hp or ibm branded system, but it''s quite a normal > intel-based system. > > intel board (S5000PSL) > intel chipset > intel e1000 lan > lsi megaraid_sas based sata-controller > 8GB RAM > >> Can you add a line before the line that is crashing: >> printk("vmx_basic_msr == %08x:%08x\n", vmx_msr_high, vmx_msr_low); >> BUG_ON(((vmx_msr_high >> 18) & 15) == 6); >> >> ...and then tell me what that line prints out immediately before the >> crash? > > yep, it says: > > vmx_basic_msr == 001a0400:00000007 > >> >> ''cat /proc/cpuinfo'' from booting Linux on that system might also be >> interesting, > > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Xeon(R) CPU 5120 @ 1.86GHz > stepping : 6 > cpu MHz : 1861.973 > cache size : 4096 KB > physical id : 0 > siblings : 1 > core id : 0 > cpu cores : 1 > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 > clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni > monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm > bogomips : 3727.86 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > > of course, all the same for processor 0-3 (besides the core id). > >> also the CPU vendor/version string printed by Linux in dmesg >> as it boots. > > xm dmesg (from the last known running version): > > Xen version 3.1.3-1 (Debian 3.1.3-0-tha10) (ralph@debianbase.de) (gcc > version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Sat Jan 12 02:22:25 > UTC 2008 > Latest ChangeSet: changeset:15590:f479c2af0825 > > (XEN) Command line: > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009f000 (usable) > (XEN) 000000000009f000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000de2b4000 (usable) > (XEN) 00000000de2b4000 - 00000000de375000 (ACPI NVS) > (XEN) 00000000de375000 - 00000000dfa42000 (usable) > (XEN) 00000000dfa42000 - 00000000dfa9a000 (reserved) > (XEN) 00000000dfa9a000 - 00000000dfad1000 (usable) > (XEN) 00000000dfad1000 - 00000000dfb1a000 (ACPI NVS) > (XEN) 00000000dfb1a000 - 00000000dfb2a000 (usable) > (XEN) 00000000dfb2a000 - 00000000dfb3a000 (ACPI data) > (XEN) 00000000dfb3a000 - 00000000dfc00000 (usable) > (XEN) 00000000dfc00000 - 00000000f0000000 (reserved) > (XEN) 00000000ffe00000 - 00000000ffe0c000 (reserved) > (XEN) 0000000100000000 - 0000000220000000 (usable) > (XEN) System RAM: 8186MB (8382644kB) > (XEN) Xen heap: 14MB (14944kB) > (XEN) Domain heap initialised: DMA width 32 bits > (XEN) Processor #0 6:15 APIC version 20 > (XEN) Processor #6 6:15 APIC version 20 > (XEN) Processor #1 6:15 APIC version 20 > (XEN) Processor #7 6:15 APIC version 20 > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 1861.973 MHz processor. > (XEN) HVM: VMX enabled > (XEN) VMX: MSR intercept bitmap enabled > (XEN) CPU0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > (XEN) Mapping cpu 0 to node 255 > (XEN) Booting processor 1/6 eip 90000 > (XEN) Mapping cpu 1 to node 255 > (XEN) CPU1: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > (XEN) Booting processor 2/1 eip 90000 > (XEN) Mapping cpu 2 to node 255 > (XEN) CPU2: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > (XEN) Booting processor 3/7 eip 90000 > (XEN) Mapping cpu 3 to node 255 > (XEN) CPU3: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > (XEN) Total of 4 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) Platform timer overflows in 14998 jiffies. > (XEN) Platform timer is 14.318MHz HPET > (XEN) Brought up 4 CPUs > (XEN) acm_init: Loading default policy (NULL). > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, lsb, paddr 0x200000 -> 0x5bc9b0 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000214000000->0000000218000000 (2013303 pages to > be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff80200000->ffffffff805bc9b0 > (XEN) Init. ramdisk: ffffffff805bd000->ffffffff814cba00 > (XEN) Phys-Mach map: ffffffff814cc000->ffffffff824483b8 > (XEN) Start info: ffffffff82449000->ffffffff8244949c > (XEN) Page tables: ffffffff8244a000->ffffffff82461000 > (XEN) Boot stack: ffffffff82461000->ffffffff82462000 > (XEN) TOTAL: ffffffff80000000->ffffffff82800000 > (XEN) ENTRY ADDRESS: ffffffff80200000 > (XEN) Dom0 has maximum 4 VCPUs > (XEN) Initrd len 0xf0ea00, start at 0xffffffff805bd000 > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to > Xen). > (XEN) Freed 100kB init memory. > > because the system is half in production use, I cannot run a normal linux > kernel (without the xen hypervisor running), but my dom0 kernel says: > > Linux version 2.6.18-tha2-xen-amd64 (root@s1vX) (gcc version 4.1.2 20061115 > (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Jan 15 04:39:44 UTC 2008 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 00000001f0077000 (usable) > DMI 2.5 present. > On node 0 totalpages: 2031735 > DMA zone: 2031735 pages, LIFO batch:31 > ACPI: RSDP (v002 INTEL ) @ > 0x00000000000f03c0 > ACPI: XSDT (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > 0x00000000dfb39120 > ACPI: FADT (v003 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > 0x00000000dfb37000 > ACPI: MADT (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > 0x00000000dfb36000 > ACPI: SPCR (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > 0x00000000dfb2f000 > ACPI: HPET (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > 0x00000000dfb2e000 > ACPI: MCFG (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > 0x00000000dfb2d000 > ACPI: OEM1 (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > 0x00000000dfb2c000 > ACPI: SSDT (v002 INTEL EIST 0x00004000 INTL 0x01000013) @ > 0x00000000dfb2b000 > ACPI: SSDT (v002 INTEL IPMI 0x00004000 INTL 0x01000013) @ > 0x00000000dfb2a000 > ACPI: DSDT (v002 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > 0x0000000000000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) > IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to xen > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at f1000000 (gap: f0000000:fe00000) > Built 1 zonelists. Total pages: 2031735 > Kernel command line: root=/dev/sda1 ro console=tty0 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Xen reported: 1861.973 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > Software IO TLB enabled: > Aperture: 64 megabytes > Kernel range: ffff88000b059000 - ffff88000f059000 > Address size: 27 bits > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Memory: 7876732k/8126940k available (1999k kernel code, 241380k reserved, > 890k data, 148k init) > Calibrating delay using timer specific routine.. 3727.86 BogoMIPS > (lpj=7455721) > Security Framework v1.0.0 initialized > SELinux: Disabled at boot. > Capability LSM initialized > Mount-cache hash table entries: 256 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 4096K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > SMP alternatives: switching to UP code > ACPI: Core revision 20060707 > SMP alternatives: switching to SMP code > Initializing CPU#1 > Initializing CPU#2 > Brought up 4 CPUs > Initializing CPU#3 > migration_cost=11114 > checking if image is initramfs... it is > Freeing initrd memory: 15418k freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG at e0000000 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > Boot video device is 0000:0e:0c.0 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC32._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) > ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) > ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11) > ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11) > ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) > ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIX._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: ACPI device : hid PNP0A03 > pnp: ACPI device : hid PNP0C02 > pnp: ACPI device : hid PNP0200 > pnp: ACPI device : hid PNP0B00 > pnp: ACPI device : hid PNP0C04 > pnp: ACPI device : hid PNP0800 > pnp: ACPI device : hid PNP0C02 > pnp: ACPI device : hid PNP0F03 > pnp: ACPI device : hid PNP0303 > pnp: ACPI device : hid PNP0501 > pnp: ACPI device : hid PNP0103 > pnp: ACPI device : hid PNP0003 > pnp: ACPI device : hid IPI0001 > pnp: PnP ACPI: found 13 devices > xen_mem: Initialising balloon driver. > usbcore: registered new driver usbfs > usbcore: registered new driver hub > [...] > > --Ralph > >> >> -- Keir >> >> On 15/1/08 03:05, "Ralph Passgang" <xen@debianbase.de> wrote: >>> Hi Keir, >>> >>> thanks, but it seems that I have just bad news for you. >>> >>> now xen 3.1 (cs 15598) compiles on i386 and amd64 but at least on amd64 >>> the hypervisor hangs at boot. I haven''t tested i386 (besides that it >>> compiles) yet. The last known working changeset for the amd64 >>> hypervisor was 15590. >>> >>> The most important part of the errormessage from the hypervisor: >>> >>> Xen call trace: >>> [<ffff828c8015f00c>] vmx_init_vmcs_config+0x1bc/0x1f0 >>> [<ffff828c80160430>] start_vmx+0x70/0x260 >>> [<ffff828c80146509>] identify_cpu+0xa8/0x200 >>> [<ffff828c801bbce6>] __start_xen+0x1ff6/0x24f0 >>> [<ffff828c801000b5>] __high_start+0xa1/0xa3 >>> >>> Panic on CPU 0: >>> Xen Bug at vmcs.c:159 >>> >>> If more information is needed, let me know. >>> >>> Ralph >>> >>> Am Montag, 14. Januar 2008 18:19:24 schrieb Keir Fraser: >>>> It was stuck in the staging tree, which I''ve now pushed manually. >>>> >>>> K. >>>> >>>> On 14/1/08 17:14, "Ralph Passgang" <xen@debianbase.de> wrote: >>>>> Hi Keir, >>>>> >>>>> xen-3.1-testing.hg still doesn''t compile on i386 for the same reason >>>>> as in my original report. I know that 3.2 is more important, but it >>>>> would be nice if the 3.1 branch could get fixed. >>>>> >>>>> thx, >>>>> Ralph >>>>> >>>>> Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie: >>>>>> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it >>>>>> tomorrow. >>>>>> >>>>>> Thanks, >>>>>> Keir >>>>>> >>>>>> On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: >>>>>>> Hi, >>>>>>> >>>>>>> I just found that xen 3.1-testing changeset 15577 fails to build on >>>>>>> i386 on debian sid/lenny/etch. It seems to compile just fine on >>>>>>> amd64/etch. >>>>>>> >>>>>>> The following happens compiling the 32bit version: >>>>>>> [...] >>>>>>> gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG >>>>>>> -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes >>>>>>> -Wno-unused-value >>>>>>> -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common >>>>>>> -iwithprefix include -Werror -Wno-pointer-arith -pipe >>>>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i3 >>>>>>> 86 /x en/incl ude >>>>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i3 >>>>>>> 86 /x en/incl ude/asm-x86/mach-generic >>>>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i3 >>>>>>> 86 /x en/incl ude/asm-x86/mach-default -msoft-float >>>>>>> -fno-stack-protector -g -D__XEN__ -DACM_SECURITY -c >>>>>>> vmx.c -o vmx.o >>>>>>> cc1: warnings being treated as errors >>>>>>> vmx.c: In function ''vmx_install_vlapic_mapping'': >>>>>>> vmx.c:2694: warning: right shift count >= width of type >>>>>>> vmx.c:2695: warning: right shift count >= width of type >>>>>>> make[8]: *** [vmx.o] Error 1 >>>>>>> make[8]: Leaving directory >>>>>>> `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i38 >>>>>>> 6/ xe n/arch/ x86/hvm/vmx'' >>>>>>> make[7]: *** [vmx/built_in.o] Error 2 >>>>>>> [...] >>>>>>> >>>>>>> The last changeset that I tried and that compiled on i386 was >>>>>>> 15564. So the last 13 changesets could be the cause. The following >>>>>>> 4 changesets changed the vmx.c, so most likely one of them causes >>>>>>> this (but I haven''t looked any further): >>>>>>> >>>>>>> 15565, 15567, 15571, 15575 >>>>>>> >>>>>>> Would be great if someone could take a look... >>>>>>> >>>>>>> Thx, >>>>>>> Ralph >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Xen-devel mailing list >>>>>>> Xen-devel@lists.xensource.com >>>>>>> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Ralph Passgang
2008-Jan-15 18:02 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
you ask for so little but made this great software... there is really no need to thank me. ...and the usual report for such cases: it works now... :) --Ralph p.s.: I am not a great c-coder, but I am pretty sure "==" is really far away from beeing the same as "!=", so you really think it will only fix the crash for _me_? *smile* Am Dienstag, 15. Januar 2008 12:15:26 schrieben Sie:> Argh, I should also have backported c/s 15527. I''ll do that now, and it > will definitely fix this crash for you. > > Thanks for the extra info! > > -- Keir > > On 15/1/08 11:06, "Ralph Passgang" <xen@debianbase.de> wrote: > > Am Dienstag, 15. Januar 2008 09:17:46 schrieben Sie: > > > > Hi Keir, > > > >> What type of CPU are you running? > > > > 2x Intel Xeon 5120 (Dual-Core), running the 64bit hypervisor. > > > >> Is it valid retail silicon? > > > > what do you mean by "valid"? at least xen 3.0.x, and 3.1.x worked on it > > without any problem before. It seems that just a change between 15590 > > and 15598 must have broken something. > > > > It''s not a dell, hp or ibm branded system, but it''s quite a normal > > intel-based system. > > > > intel board (S5000PSL) > > intel chipset > > intel e1000 lan > > lsi megaraid_sas based sata-controller > > 8GB RAM > > > >> Can you add a line before the line that is crashing: > >> printk("vmx_basic_msr == %08x:%08x\n", vmx_msr_high, vmx_msr_low); > >> BUG_ON(((vmx_msr_high >> 18) & 15) == 6); > >> > >> ...and then tell me what that line prints out immediately before the > >> crash? > > > > yep, it says: > > > > vmx_basic_msr == 001a0400:00000007 > > > >> ''cat /proc/cpuinfo'' from booting Linux on that system might also be > >> interesting, > > > > processor : 0 > > vendor_id : GenuineIntel > > cpu family : 6 > > model : 15 > > model name : Intel(R) Xeon(R) CPU 5120 @ 1.86GHz > > stepping : 6 > > cpu MHz : 1861.973 > > cache size : 4096 KB > > physical id : 0 > > siblings : 1 > > core id : 0 > > cpu cores : 1 > > fpu : yes > > fpu_exception : yes > > cpuid level : 10 > > wp : yes > > flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 > > clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc > > pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm > > bogomips : 3727.86 > > clflush size : 64 > > cache_alignment : 64 > > address sizes : 36 bits physical, 48 bits virtual > > power management: > > > > of course, all the same for processor 0-3 (besides the core id). > > > >> also the CPU vendor/version string printed by Linux in dmesg > >> as it boots. > > > > xm dmesg (from the last known running version): > > > > Xen version 3.1.3-1 (Debian 3.1.3-0-tha10) (ralph@debianbase.de) (gcc > > version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Sat Jan 12 > > 02:22:25 UTC 2008 > > Latest ChangeSet: changeset:15590:f479c2af0825 > > > > (XEN) Command line: > > (XEN) Video information: > > (XEN) VGA is text mode 80x25, font 8x16 > > (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds > > (XEN) EDID info not retrieved because no DDC retrieval method detected > > (XEN) Disc information: > > (XEN) Found 1 MBR signatures > > (XEN) Found 1 EDD information structures > > (XEN) Xen-e820 RAM map: > > (XEN) 0000000000000000 - 000000000009f000 (usable) > > (XEN) 000000000009f000 - 0000000000100000 (reserved) > > (XEN) 0000000000100000 - 00000000de2b4000 (usable) > > (XEN) 00000000de2b4000 - 00000000de375000 (ACPI NVS) > > (XEN) 00000000de375000 - 00000000dfa42000 (usable) > > (XEN) 00000000dfa42000 - 00000000dfa9a000 (reserved) > > (XEN) 00000000dfa9a000 - 00000000dfad1000 (usable) > > (XEN) 00000000dfad1000 - 00000000dfb1a000 (ACPI NVS) > > (XEN) 00000000dfb1a000 - 00000000dfb2a000 (usable) > > (XEN) 00000000dfb2a000 - 00000000dfb3a000 (ACPI data) > > (XEN) 00000000dfb3a000 - 00000000dfc00000 (usable) > > (XEN) 00000000dfc00000 - 00000000f0000000 (reserved) > > (XEN) 00000000ffe00000 - 00000000ffe0c000 (reserved) > > (XEN) 0000000100000000 - 0000000220000000 (usable) > > (XEN) System RAM: 8186MB (8382644kB) > > (XEN) Xen heap: 14MB (14944kB) > > (XEN) Domain heap initialised: DMA width 32 bits > > (XEN) Processor #0 6:15 APIC version 20 > > (XEN) Processor #6 6:15 APIC version 20 > > (XEN) Processor #1 6:15 APIC version 20 > > (XEN) Processor #7 6:15 APIC version 20 > > (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > > (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 > > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > (XEN) Detected 1861.973 MHz processor. > > (XEN) HVM: VMX enabled > > (XEN) VMX: MSR intercept bitmap enabled > > (XEN) CPU0: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > > (XEN) Mapping cpu 0 to node 255 > > (XEN) Booting processor 1/6 eip 90000 > > (XEN) Mapping cpu 1 to node 255 > > (XEN) CPU1: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > > (XEN) Booting processor 2/1 eip 90000 > > (XEN) Mapping cpu 2 to node 255 > > (XEN) CPU2: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > > (XEN) Booting processor 3/7 eip 90000 > > (XEN) Mapping cpu 3 to node 255 > > (XEN) CPU3: Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 > > (XEN) Total of 4 processors activated. > > (XEN) ENABLING IO-APIC IRQs > > (XEN) -> Using new ACK method > > (XEN) Platform timer overflows in 14998 jiffies. > > (XEN) Platform timer is 14.318MHz HPET > > (XEN) Brought up 4 CPUs > > (XEN) acm_init: Loading default policy (NULL). > > (XEN) *** LOADING DOMAIN 0 *** > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > (XEN) Dom0 kernel: 64-bit, lsb, paddr 0x200000 -> 0x5bc9b0 > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > (XEN) Dom0 alloc.: 0000000214000000->0000000218000000 (2013303 pages > > to be allocated) > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > (XEN) Loaded kernel: ffffffff80200000->ffffffff805bc9b0 > > (XEN) Init. ramdisk: ffffffff805bd000->ffffffff814cba00 > > (XEN) Phys-Mach map: ffffffff814cc000->ffffffff824483b8 > > (XEN) Start info: ffffffff82449000->ffffffff8244949c > > (XEN) Page tables: ffffffff8244a000->ffffffff82461000 > > (XEN) Boot stack: ffffffff82461000->ffffffff82462000 > > (XEN) TOTAL: ffffffff80000000->ffffffff82800000 > > (XEN) ENTRY ADDRESS: ffffffff80200000 > > (XEN) Dom0 has maximum 4 VCPUs > > (XEN) Initrd len 0xf0ea00, start at 0xffffffff805bd000 > > (XEN) Scrubbing Free RAM: .done. > > (XEN) Xen trace buffers: disabled > > (XEN) Std. Loglevel: Errors and warnings > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > > (XEN) Xen is relinquishing VGA console. > > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch > > input to Xen). > > (XEN) Freed 100kB init memory. > > > > because the system is half in production use, I cannot run a normal > > linux kernel (without the xen hypervisor running), but my dom0 kernel > > says: > > > > Linux version 2.6.18-tha2-xen-amd64 (root@s1vX) (gcc version 4.1.2 > > 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Jan 15 04:39:44 UTC > > 2008 BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 00000001f0077000 (usable) > > DMI 2.5 present. > > On node 0 totalpages: 2031735 > > DMA zone: 2031735 pages, LIFO batch:31 > > ACPI: RSDP (v002 INTEL ) @ > > 0x00000000000f03c0 > > ACPI: XSDT (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > > 0x00000000dfb39120 > > ACPI: FADT (v003 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > > 0x00000000dfb37000 > > ACPI: MADT (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > > 0x00000000dfb36000 > > ACPI: SPCR (v001 INTEL S5000PSL 0x00000000 INTL 0x01000013) @ > > 0x00000000dfb2f000 > > ACPI: HPET (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > > 0x00000000dfb2e000 > > ACPI: MCFG (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > > 0x00000000dfb2d000 > > ACPI: OEM1 (v001 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > > 0x00000000dfb2c000 > > ACPI: SSDT (v002 INTEL EIST 0x00004000 INTL 0x01000013) @ > > 0x00000000dfb2b000 > > ACPI: SSDT (v002 INTEL IPMI 0x00004000 INTL 0x01000013) @ > > 0x00000000dfb2a000 > > ACPI: DSDT (v002 INTEL S5000PSL 0x00000001 INTL 0x01000013) @ > > 0x0000000000000000 > > ACPI: Local APIC address 0xfee00000 > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > > ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) > > IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > > ACPI: IRQ0 used by override. > > ACPI: IRQ2 used by override. > > ACPI: IRQ9 used by override. > > Setting APIC routing to xen > > Using ACPI (MADT) for SMP configuration information > > Allocating PCI resources starting at f1000000 (gap: f0000000:fe00000) > > Built 1 zonelists. Total pages: 2031735 > > Kernel command line: root=/dev/sda1 ro console=tty0 > > Initializing CPU#0 > > PID hash table entries: 4096 (order: 12, 32768 bytes) > > Xen reported: 1861.973 MHz processor. > > Console: colour VGA+ 80x25 > > Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > > Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > > Software IO TLB enabled: > > Aperture: 64 megabytes > > Kernel range: ffff88000b059000 - ffff88000f059000 > > Address size: 27 bits > > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > > Memory: 7876732k/8126940k available (1999k kernel code, 241380k > > reserved, 890k data, 148k init) > > Calibrating delay using timer specific routine.. 3727.86 BogoMIPS > > (lpj=7455721) > > Security Framework v1.0.0 initialized > > SELinux: Disabled at boot. > > Capability LSM initialized > > Mount-cache hash table entries: 256 > > CPU: L1 I cache: 32K, L1 D cache: 32K > > CPU: L2 cache: 4096K > > CPU: Physical Processor ID: 0 > > CPU: Processor Core ID: 0 > > SMP alternatives: switching to UP code > > ACPI: Core revision 20060707 > > SMP alternatives: switching to SMP code > > Initializing CPU#1 > > Initializing CPU#2 > > Brought up 4 CPUs > > Initializing CPU#3 > > migration_cost=11114 > > checking if image is initramfs... it is > > Freeing initrd memory: 15418k freed > > NET: Registered protocol family 16 > > ACPI: bus type pci registered > > PCI: Using MMCONFIG at e0000000 > > ACPI: Interpreter enabled > > ACPI: Using IOAPIC for interrupt routing > > ACPI: PCI Root Bridge [PCI0] (0000:00) > > PCI: Probing PCI hardware (bus 00) > > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > > Boot video device is 0000:0e:0c.0 > > PCI: Transparent bridge - 0000:00:1e.0 > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC32._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > > ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) > > ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) > > ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) > > ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) > > ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11) > > ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11) > > ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) > > ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIX._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT] > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] > > Linux Plug and Play Support v0.97 (c) Adam Belay > > pnp: PnP ACPI init > > pnp: ACPI device : hid PNP0A03 > > pnp: ACPI device : hid PNP0C02 > > pnp: ACPI device : hid PNP0200 > > pnp: ACPI device : hid PNP0B00 > > pnp: ACPI device : hid PNP0C04 > > pnp: ACPI device : hid PNP0800 > > pnp: ACPI device : hid PNP0C02 > > pnp: ACPI device : hid PNP0F03 > > pnp: ACPI device : hid PNP0303 > > pnp: ACPI device : hid PNP0501 > > pnp: ACPI device : hid PNP0103 > > pnp: ACPI device : hid PNP0003 > > pnp: ACPI device : hid IPI0001 > > pnp: PnP ACPI: found 13 devices > > xen_mem: Initialising balloon driver. > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > [...] > > > > --Ralph > > > >> -- Keir > >> > >> On 15/1/08 03:05, "Ralph Passgang" <xen@debianbase.de> wrote: > >>> Hi Keir, > >>> > >>> thanks, but it seems that I have just bad news for you. > >>> > >>> now xen 3.1 (cs 15598) compiles on i386 and amd64 but at least on > >>> amd64 the hypervisor hangs at boot. I haven''t tested i386 (besides > >>> that it compiles) yet. The last known working changeset for the amd64 > >>> hypervisor was 15590. > >>> > >>> The most important part of the errormessage from the hypervisor: > >>> > >>> Xen call trace: > >>> [<ffff828c8015f00c>] vmx_init_vmcs_config+0x1bc/0x1f0 > >>> [<ffff828c80160430>] start_vmx+0x70/0x260 > >>> [<ffff828c80146509>] identify_cpu+0xa8/0x200 > >>> [<ffff828c801bbce6>] __start_xen+0x1ff6/0x24f0 > >>> [<ffff828c801000b5>] __high_start+0xa1/0xa3 > >>> > >>> Panic on CPU 0: > >>> Xen Bug at vmcs.c:159 > >>> > >>> If more information is needed, let me know. > >>> > >>> Ralph > >>> > >>> Am Montag, 14. Januar 2008 18:19:24 schrieb Keir Fraser: > >>>> It was stuck in the staging tree, which I''ve now pushed manually. > >>>> > >>>> K. > >>>> > >>>> On 14/1/08 17:14, "Ralph Passgang" <xen@debianbase.de> wrote: > >>>>> Hi Keir, > >>>>> > >>>>> xen-3.1-testing.hg still doesn''t compile on i386 for the same > >>>>> reason as in my original report. I know that 3.2 is more important, > >>>>> but it would be nice if the 3.1 branch could get fixed. > >>>>> > >>>>> thx, > >>>>> Ralph > >>>>> > >>>>> Am Freitag, 11. Januar 2008 01:54:16 schrieben Sie: > >>>>>> We''re missing xen-unstable:15526 from 3.1-testing. I''ll add it > >>>>>> tomorrow. > >>>>>> > >>>>>> Thanks, > >>>>>> Keir > >>>>>> > >>>>>> On 11/1/08 00:40, "Ralph Passgang" <xen@debianbase.de> wrote: > >>>>>>> Hi, > >>>>>>> > >>>>>>> I just found that xen 3.1-testing changeset 15577 fails to build > >>>>>>> on i386 on debian sid/lenny/etch. It seems to compile just fine > >>>>>>> on amd64/etch. > >>>>>>> > >>>>>>> The following happens compiling the 32bit version: > >>>>>>> [...] > >>>>>>> gcc -O2 -fomit-frame-pointer -m32 -march=i686 -DNDEBUG > >>>>>>> -fno-strict-aliasing -std=gnu99 -Wall -Wstrict-prototypes > >>>>>>> -Wno-unused-value > >>>>>>> -Wdeclaration-after-statement -nostdinc -fno-builtin -fno-common > >>>>>>> -iwithprefix include -Werror -Wno-pointer-arith -pipe > >>>>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_ > >>>>>>>i3 86 /x en/incl ude > >>>>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_ > >>>>>>>i3 86 /x en/incl ude/asm-x86/mach-generic > >>>>>>> -I/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_ > >>>>>>>i3 86 /x en/incl ude/asm-x86/mach-default -msoft-float > >>>>>>> -fno-stack-protector -g -D__XEN__ -DACM_SECURITY -c > >>>>>>> vmx.c -o vmx.o > >>>>>>> cc1: warnings being treated as errors > >>>>>>> vmx.c: In function ''vmx_install_vlapic_mapping'': > >>>>>>> vmx.c:2694: warning: right shift count >= width of type > >>>>>>> vmx.c:2695: warning: right shift count >= width of type > >>>>>>> make[8]: *** [vmx.o] Error 1 > >>>>>>> make[8]: Leaving directory > >>>>>>> `/tmp/buildd/xen-3.1-3.1.3-0/debian/build/build-hypervisor_i386_i > >>>>>>>38 6/ xe n/arch/ x86/hvm/vmx'' > >>>>>>> make[7]: *** [vmx/built_in.o] Error 2 > >>>>>>> [...] > >>>>>>> > >>>>>>> The last changeset that I tried and that compiled on i386 was > >>>>>>> 15564. So the last 13 changesets could be the cause. The > >>>>>>> following 4 changesets changed the vmx.c, so most likely one of > >>>>>>> them causes this (but I haven''t looked any further): > >>>>>>> > >>>>>>> 15565, 15567, 15571, 15575 > >>>>>>> > >>>>>>> Would be great if someone could take a look... > >>>>>>> > >>>>>>> Thx, > >>>>>>> Ralph > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Xen-devel mailing list > >>>>>>> Xen-devel@lists.xensource.com > >>>>>>> http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-15 18:21 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
On 15/1/08 18:02, "Ralph Passgang" <xen@debianbase.de> wrote:> p.s.: I am not a great c-coder, but I am pretty sure "==" is really far away > from beeing the same as "!=", so you really think it will only fix the > crash for _me_? *smile*Indeed. It would explain why the changeset was ''stuck'' in the staging tree because of automated test failures! -- Keir _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Ralph Passgang
2008-Jan-16 16:24 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
Am Dienstag, 15. Januar 2008 19:21:24 schrieb Keir Fraser:> On 15/1/08 18:02, "Ralph Passgang" <xen@debianbase.de> wrote: > > p.s.: I am not a great c-coder, but I am pretty sure "==" is really far > > away from beeing the same as "!=", so you really think it will only fix > > the crash for _me_? *smile* > > Indeed. It would explain why the changeset was ''stuck'' in the staging > tree because of automated test failures!Yep, so you have tests for building xen and for at least booting the hypervisor and most likely dom0, but it clearly shows that you don''t have an automated hvm guest creation tests embedded in your test suite. :) I just noticed that now everything is fine for my system besides the fact that hvm guests doesn''t boot anymore. With a vnc session connected you can see the usual bios part, but then nothing happens. The guest os doesn''t get loaded and with xm top I see the domain using 100% cpu-time. Vnc still and forever only shows the bios messages. I tried Vista 64 and XP (32bit) but exactly the same happens. Lasting known working changeset was 15590. 15598 didn''t booted on my amd64 and now I see this hvm problems on 15600. So between 15590-15600 must be something. Feel a bit like a chess game, now it''s your turn again ;)) --Ralph> -- Keir_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-16 16:27 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
On 16/1/08 16:24, "Ralph Passgang" <xen@debianbase.de> wrote:> Yep, so you have tests for building xen and for at least booting the > hypervisor and most likely dom0, but it clearly shows that you don''t have > an automated hvm guest creation tests embedded in your test suite. :)We do. I ignored the test results and manually pushed!> I just noticed that now everything is fine for my system besides the fact > that hvm guests doesn''t boot anymore. With a vnc session connected you can > see the usual bios part, but then nothing happens. The guest os doesn''t get > loaded and with xm top I see the domain using 100% cpu-time. Vnc still and > forever only shows the bios messages. I tried Vista 64 and XP (32bit) but > exactly the same happens. > > Lasting known working changeset was 15590. 15598 didn''t booted on my amd64 > and now I see this hvm problems on 15600. So between 15590-15600 must be > something.Yes, I think our automated tests are probably choking on the same problem. I''ll have to reproduce this myself, but I''ll probably not have time until next week. -- Keir> Feel a bit like a chess game, now it''s your turn again ;))_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2008-Jan-17 14:36 UTC
Re: [Xen-devel] Xen 3.1-testing 32bit vmx fails to compile(CS 15577/tip)
On 16/1/08 16:24, "Ralph Passgang" <xen@debianbase.de> wrote:> Lasting known working changeset was 15590. 15598 didn''t booted on my amd64 > and now I see this hvm problems on 15600. So between 15590-15600 must be > something. > > Feel a bit like a chess game, now it''s your turn again ;))Current tip of the staging tree fixes this issue (changeset 15602). -- Keir _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel