INT13 LBA48 support for disks bigger than 128GB. The new limit should be
2TB.
Signed-off-by: Samuel Thibault <samuel.thibault@citrix.com>
diff -r d048ef27cb02 tools/firmware/rombios/rombios.c
--- a/tools/firmware/rombios/rombios.c Fri Nov 09 15:21:01 2007 +0000
+++ b/tools/firmware/rombios/rombios.c Mon Nov 12 14:26:16 2007 +0000
@@ -2538,7 +2538,10 @@
case ATA_TYPE_ATA:
printf("ata%d %s: ",channel,slave?"
slave":"master");
i=0; while(c=read_byte(get_SS(),model+i++)) printf("%c",c);
- printf(" ATA-%d Hard-Disk (%d
MBytes)\n",version,(Bit16u)sizeinmb);
+ if (sizeinmb < 1UL<<16)
+ printf(" ATA-%d Hard-Disk (%04u
MBytes)\n",version,(Bit16u)sizeinmb);
+ else
+ printf(" ATA-%d Hard-Disk (%04u
GBytes)\n",version,(Bit16u)(sizeinmb>>10));
break;
case ATA_TYPE_ATAPI:
printf("ata%d %s: ",channel,slave?"
slave":"master");
@@ -2671,8 +2674,28 @@
if (mode == ATA_MODE_PIO32) blksize>>=2;
else blksize>>=1;
+ // Reset count of transferred data
+ write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
+ write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
+ current = 0;
+
+ status = inb(iobase1 + ATA_CB_STAT);
+ if (status & ATA_CB_STAT_BSY) return 1;
+
+ outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
+
// sector will be 0 only on lba access. Convert to lba-chs
if (sector == 0) {
+ if ((count >= 1 << 8) || (lba + count >= 1UL << 28)) {
+ outb(iobase1 + ATA_CB_FR, 0x00);
+ outb(iobase1 + ATA_CB_SC, (count >> 8) & 0xff);
+ outb(iobase1 + ATA_CB_SN, lba >> 24);
+ outb(iobase1 + ATA_CB_CL, 0);
+ outb(iobase1 + ATA_CB_CH, 0);
+ command |= 0x04;
+ count &= (1UL << 8) - 1;
+ lba &= (1UL << 24) - 1;
+ }
sector = (Bit16u) (lba & 0x000000ffL);
lba >>= 8;
cylinder = (Bit16u) (lba & 0x0000ffffL);
@@ -2680,15 +2703,6 @@
head = ((Bit16u) (lba & 0x0000000fL)) | 0x40;
}
- // Reset count of transferred data
- write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
- write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
- current = 0;
-
- status = inb(iobase1 + ATA_CB_STAT);
- if (status & ATA_CB_STAT_BSY) return 1;
-
- outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
outb(iobase1 + ATA_CB_FR, 0x00);
outb(iobase1 + ATA_CB_SC, count);
outb(iobase1 + ATA_CB_SN, sector);
@@ -2814,8 +2828,28 @@
if (mode == ATA_MODE_PIO32) blksize>>=2;
else blksize>>=1;
+ // Reset count of transferred data
+ write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
+ write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
+ current = 0;
+
+ status = inb(iobase1 + ATA_CB_STAT);
+ if (status & ATA_CB_STAT_BSY) return 1;
+
+ outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
+
// sector will be 0 only on lba access. Convert to lba-chs
if (sector == 0) {
+ if ((count >= 1 << 8) || (lba + count >= 1UL << 28)) {
+ outb(iobase1 + ATA_CB_FR, 0x00);
+ outb(iobase1 + ATA_CB_SC, (count >> 8) & 0xff);
+ outb(iobase1 + ATA_CB_SN, lba >> 24);
+ outb(iobase1 + ATA_CB_CL, 0);
+ outb(iobase1 + ATA_CB_CH, 0);
+ command |= 0x04;
+ count &= (1UL << 8) - 1;
+ lba &= (1UL << 24) - 1;
+ }
sector = (Bit16u) (lba & 0x000000ffL);
lba >>= 8;
cylinder = (Bit16u) (lba & 0x0000ffffL);
@@ -2823,15 +2857,6 @@
head = ((Bit16u) (lba & 0x0000000fL)) | 0x40;
}
- // Reset count of transferred data
- write_word(ebda_seg, &EbdaData->ata.trsfsectors,0);
- write_dword(ebda_seg, &EbdaData->ata.trsfbytes,0L);
- current = 0;
-
- status = inb(iobase1 + ATA_CB_STAT);
- if (status & ATA_CB_STAT_BSY) return 1;
-
- outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
outb(iobase1 + ATA_CB_FR, 0x00);
outb(iobase1 + ATA_CB_SC, count);
outb(iobase1 + ATA_CB_SN, sector);
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel