Darryl Bowler
2007-Dec-19 16:06 UTC
[Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
No one could help me on the other dist lists. Can anyone shed light on this?
----- Forwarded Message ----
From: Darryl Bowler <darryl.bowler@yahoo.com>
To: fedora-xen@redhat.com; xen-users@lists.xensource.com
Sent: Monday, December 17, 2007 11:41:26 PM
Subject: AMD 64 X2 5200 - XEN only detects one core
I have an ACER AM3100-UD5200A which uses an AMD 64 X2 5200.
Xen only detects one of two cores
First I installed Fedora 8 + Xen that ships with the distro and found that only
one core was detected when DOM0 booted. Out of frustration I decided to install
CentOS 5.1 as a quick resolution to the problem, but found the same problem.
checking /proc/cpuinfo
there is only one core
[root@dom0 lib]# more /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 67
model name : AMD Athlon(tm) 64 X2 Dual Core Processor
5200+
stepping : 2
cpu MHz : 2593.594
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush
mmx fxsr sse sse2 ht sysca
ll nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm
cr8_legacy
bogomips :
6485.48
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
Heres dmesg from CentOS
Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
Linux version 2.6.18-53.el5xen (mockbuild@builder6.centos.org) (gcc version
4.1.2 20070626 (Red Hat 4.1.2
-14)) #1 SMP Mon Nov 12 02:46:57 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000a5250000 (usable)
On node 0 totalpages: 676432
DMA zone: 676432 pages, LIFO batch:31
DMI 2.5 present.
ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0
ACPI: RSDT
(v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe3000
ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe3080
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @
0x00000000affe7cc0
ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @
0x00000000affe7f80
ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @
0x00000000affe7fc0
ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe8140
ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe7c40
ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @
0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02]
address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.Kernel command line: ro
root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2593.594 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff880004847000 - 0xffff880008847000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 2563840k/2705728k available (2357k kernel code, 133072k reserved, 1326k
data, 172k init)
Calibrating delay using timer specific routine..
6485.48 BogoMIPS (lpj=12970967)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
ACPI: Core revision 20060707
Brought up 1 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at b4000000
(gap: b0000000:30000000)
Built 1 zonelists. Total pages: 676432
[2007-12-18 01:59:05 xend.XendDomainInfo 3028] DEBUG (XendDomainInfo:756)
Storing VM details: {''shadow_me
mory'': ''0'', ''uuid'':
''00000000-0000-0000-0000-000000000000'',
''on_reboot'': ''restart'',
''on_poweroff'': ''destr
oy'', ''name'': ''Domain-0'',
''xend/restart_count'': ''0'',
''vcpus'': ''1'',
''vcpu_avail'': ''1'',
''memory'': ''2635'', ''o
n_crash'': ''restart'', ''maxmem'':
''2635''}
Never miss a thing. Make Yahoo your homepage.
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Keir Fraser
2007-Dec-19 16:14 UTC
Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
The logs you sent in this email are unfortunately not very useful for this bug. Please send us the output of xm dmesg¹ (this will get us the logs of Xen itself booting) and also (if possible) the dmesg output of booting a native (non-Xen) kernel. -- Keir On 19/12/07 16:06, "Darryl Bowler" <darryl.bowler@yahoo.com> wrote:> No one could help me on the other dist lists. Can anyone shed light on this? > > ----- Forwarded Message ---- > From: Darryl Bowler <darryl.bowler@yahoo.com> > To: fedora-xen@redhat.com; xen-users@lists.xensource.com > Sent: Monday, December 17, 2007 11:41:26 PM > Subject: AMD 64 X2 5200 - XEN only detects one core > > I have an ACER AM3100-UD5200A which uses an AMD 64 X2 5200. > > Xen only detects one of two cores > > First I installed Fedora 8 + Xen that ships with the distro and found that > only one core was detected when DOM0 booted. Out of frustration I decided to > install CentOS 5.1 as a quick resolution to the problem, but found the same > problem. > > > checking /proc/cpuinfo > there is only one core > [root@dom0 lib]# more /proc/cpuinfo > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 67 > model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ > stepping : 2 > cpu MHz : 2593.594 > cache size : 1024 KB > physical id : 0 > siblings : 1 > core id : 0 > cpu cores : 1 > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush > mmx fxsr sse sse2 ht sysca > ll nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm > cr8_legacy > bogomips : 6485.48 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp tm stc > > > Heres dmesg from CentOS > > Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) > Linux version 2.6.18-53.el5xen (mockbuild@builder6.centos.org) (gcc version > 4.1.2 20070626 (Red Hat 4.1.2 > -14)) #1 SMP Mon Nov 12 02:46:57 EST 2007 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 00000000a5250000 (usable) > On node 0 totalpages: 676432 > DMA zone: 676432 pages, LIFO batch:31 > DMI 2.5 present. > ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0 > ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe3000 > ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe3080 > ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ > 0x00000000affe7cc0 > ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @ > 0x00000000affe7f80 > ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @ > 0x00000000affe7fc0 > ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe8140 > ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe7c40 > ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @ > 0x0000000000000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override.Kernel command line: ro > root=/dev/VolGroup00/LogVol00 rhgb quiet > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Xen reported: 2593.594 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Software IO TLB enabled: > Aperture: 64 megabytes > Kernel range: 0xffff880004847000 - 0xffff880008847000 > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > Memory: 2563840k/2705728k available (2357k kernel code, 133072k reserved, > 1326k data, 172k init) > Calibrating delay using timer specific routine.. 6485.48 BogoMIPS > (lpj=12970967) > Security Framework v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > (SMP-)alternatives turned off > ACPI: Core revision 20060707 > Brought up 1 CPUs > sizeof(vma)=168 bytes > sizeof(page)=56 bytes > sizeof(inode)=560 bytes > sizeof(dentry)=216 bytes > sizeof(ext3inode)=760 bytes > sizeof(buffer_head)=96 bytes > sizeof(skbuff)=240 bytes > > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to xen > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at b4000000 (gap: b0000000:30000000) > Built 1 zonelists. Total pages: 676432 > > > > > > [2007-12-18 01:59:05 xend.XendDomainInfo 3028] DEBUG (XendDomainInfo:756) > Storing VM details: {''shadow_me > mory'': ''0'', ''uuid'': ''00000000-0000-0000-0000-000000000000'', ''on_reboot'': > ''restart'', ''on_poweroff'': ''destr > oy'', ''name'': ''Domain-0'', ''xend/restart_count'': ''0'', ''vcpus'': ''1'', > ''vcpu_avail'': ''1'', ''memory'': ''2635'', ''o > n_crash'': ''restart'', ''maxmem'': ''2635''} > > > > > > > Never miss a thing. Make Yahoo your homepage. > <http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs> > > > > > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now. > <http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HD > tDypao8Wcj9tAcJ > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Darryl Bowler
2007-Dec-19 16:54 UTC
Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
As Requested
Xen version 3.1.0-53.1.4.el5 (mockbuild@) (gcc version 4.1.2 20070626 (Red Hat
4.1.2-14)) Fri Nov 30 00:37:12 EST 2007
Latest ChangeSet: unavailable
(XEN) Command line: /xen.gz-2.6.18-53.1.4.el5
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f400 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000affe0000 (usable)
(XEN) 00000000affe0000 - 00000000affe3000 (ACPI NVS)
(XEN) 00000000affe3000 - 00000000afff0000 (ACPI data)
(XEN) 00000000afff0000 - 00000000b0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2815MB (2883068kB)
(XEN) Xen heap: 13MB (14184kB)
(XEN) Domain heap initialised: DMA width 32 bits
(XEN) Processor #0 15:3 APIC version 16
(XEN) Processor #1 15:3 APIC version 16
(XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2593.611 MHz processor.
(XEN) AMD SVM: ASIDs disabled.
(XEN) HVM: SVM enabled
(XEN) CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
(XEN) Mapping cpu 0 to node 255
(XEN) Booting processor 1/1 eip 90000
(XEN) Not responding.
(XEN) Inquiring remote APIC #1...
(XEN) ... APIC #1 ID: 01000000
(XEN) ... APIC #1 VERSION: 80050010
(XEN) ... APIC #1 SPIV: 000000ff
(XEN) Unmapping cpu 1 from all nodes
(XEN) CPU #1 not responding - cannot use it.
(XEN) Total of 1 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 1 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2c3c58
(XEN) elf_parse_binary: phdr: paddr=0xffffffff804c3c80 memsz=0x113270
(XEN) elf_parse_binary: phdr: paddr=0xffffffff805d7000 memsz=0xc08
(XEN) elf_parse_binary: phdr: paddr=0xffffffff805d8000 memsz=0x10af04
(XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff806e2f04
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000
(XEN) elf_xen_parse_note: FEATURES =
"writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0xffffffff80000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xffffffff80200000
(XEN) virt_kend = 0xffffffff806e2f04
(XEN) virt_entry = 0xffffffff80200000
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 ->
0xffffffff806e2f04
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000000aa000000->00000000ac000000 (666192 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff806e2f04
(XEN) Init. ramdisk: ffffffff806e3000->ffffffff80e63200
(XEN) Phys-Mach map: ffffffff80e64000->ffffffff81389280
(XEN) Start info: ffffffff8138a000->ffffffff8138a49c
(XEN) Page tables: ffffffff8138b000->ffffffff8139a000
(XEN) Boot stack: ffffffff8139a000->ffffffff8139b000
(XEN) TOTAL: ffffffff80000000->ffffffff81800000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804c3c58
(XEN) elf_load_binary: phdr 1 at 0xffffffff804c3c80 -> 0xffffffff805d6ef0
(XEN) elf_load_binary: phdr 2 at 0xffffffff805d7000 -> 0xffffffff805d7c08
(XEN) elf_load_binary: phdr 3 at 0xffffffff805d8000 -> 0xffffffff80611388
(XEN) Initrd len 0x780200, start at 0xffffffff806e3000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch
input to Xen).
----------------------------
Linux version 2.6.18-53.1.4.el5 (mockbuild@builder6.centos.org) (gcc version
4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 30 00:45:55 EST 2007
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000affe0000 (usable)
BIOS-e820: 00000000affe0000 - 00000000affe3000 (ACPI NVS)
BIOS-e820: 00000000affe3000 - 00000000afff0000 (ACPI data)
BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.5 present.
ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0
ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe3000
ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe3080
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @
0x00000000affe7cc0
ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @
0x00000000affe7f80
ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @
0x00000000affe7fc0
ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe8140
ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe7c40
ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @
0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 00000000affe0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-00000000affe0000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 709663
DMA zone: 2694 pages, LIFO batch:0
DMA32 zone: 706969 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at b4000000 (gap: b0000000:30000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 709663
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 78a2000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 2829052k/2883456k available (2434k kernel code, 54016k reserved, 1235k
data, 192k init)
Calibrating delay using timer specific routine.. 5339.01 BogoMIPS (lpj=2669506)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12471455
Detected 12.471 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5187.01 BogoMIPS (lpj=2593508)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 617 cycles)
Brought up 2 CPUs
testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer.
time.c: Detected 2594.059 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
migration_cost=435
checking if image is initramfs... it is
Freeing initrd memory: 3109k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq". If it
helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
PCI-DMA: Disabling IOMMU.
pnp: 00:01: ioport range 0x4100-0x411f has been reserved
pnp: 00:01: ioport range 0x228-0x22f has been reserved
pnp: 00:01: ioport range 0x40b-0x40b has been reserved
pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fdd00000-fdefffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:07.0
IO window: e000-efff
MEM window: fdc00000-fdcfffff
PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:00:14.4
IO window: c000-cfff
MEM window: fdb00000-fdbfffff
PREFETCH window: fda00000-fdafffff
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1198060862.578:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key BF23BF4D1917253
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (46 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller at PCI slot 0000:00:14.1
GSI 16 sharing vector 0xB9 and IRQ 16
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185
SB600_PATA: chipset revision 0
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn''t have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors
(2 cpu cores) (version 2.10.00)
powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa
powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xc
powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xe
powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x10
powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 192k freed
Write protecting the kernel read-only data: 468k
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 ''Open'' Host Controller (OHCI)
Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 185
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 185, io mem 0xfe02e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 17 sharing vector 0xC1 and IRQ 17
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 193, io mem 0xfe02d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 sharing vector 0xC9 and IRQ 18
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 201
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.2: irq 201, io mem 0xfe02c000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.3: irq 193, io mem 0xfe02b000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 201
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.4: irq 201, io mem 0xfe02a000
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
GSI 19 sharing vector 0xD1 and IRQ 19
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 209
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 209, io mem 0xfe029000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 10 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ahci 0000:00:12.0: version 2.2
GSI 20 sharing vector 0xD9 and IRQ 20
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 217
ahci 0000:00:12.0: controller can''t do 64bit DMA, forcing 32bit
usb 2-1: USB disconnect, address 2
usb 2-1: new low speed USB device using ohci_hcd and address 4
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000028100 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 217
ata2: SATA max UDMA/133 cmd 0xffffc20000028180 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 217
ata3: SATA max UDMA/133 cmd 0xffffc20000028200 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 217
ata4: SATA max UDMA/133 cmd 0xffffc20000028280 ctl 0x0000000000000000 bmdma
0x0000000000000000 irq 217
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1
usb 2-2: new low speed USB device using ohci_hcd and address 5
usb 2-2: configuration #1 chosen from 1 choice
input: Chicony USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:13.1-2
input: Chicony USB Keyboard as /class/input/input3
input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on
usb-0000:00:13.1-2
ohci_hcd 0000:00:13.2: wakeup
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000AAJS-22YFA0, 12.01C02, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
usb 3-1: new full speed USB device using ohci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
usb 3-1: configuration #1 chosen from 1 choice
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI, max UDMA/66
ata3.00: configured for UDMA/66
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: WDC WD5000AAJS-2 Rev: 12.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
Vendor: Optiarc Model: DVD RW AD-7170S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 05
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usbcore: registered new driver usb-storage
usb-storage: waiting for device to settle before scanning
USB Mass Storage support registered.
Vendor: Generic Model: USB SD Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:0: Attached scsi removable disk sdb
Vendor: Generic Model: USB CF Reader Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:1: Attached scsi removable disk sdc
Vendor: Generic Model: USB SM Reader Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:2: Attached scsi removable disk sdd
Vendor: Generic Model: USB MS Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
sd 4:0:0:3: Attached scsi removable disk sde
usb-storage: device scan complete
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1198060879.953:2): selinux=0 auid=4294967295
EDAC MC: Ver: 2.0.1 Nov 30 2007
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
input: PC Speaker as /class/input/input4
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
sd 4:0:0:2: Attached scsi generic sg4 type 0
sd 4:0:0:3: Attached scsi generic sg5 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
8139too Fast Ethernet driver 0.9.27
GSI 21 sharing vector 0xE1 and IRQ 21
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 225
eth0: RealTek RTL8139 at 0xffffc2000002a000, 00:50:bf:d8:a0:a1, IRQ 225
eth0: Identified 8139 chip type ''RTL-8139C''
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
cannot find the slot for index 0 (range 0-0), error: -16
hda-intel: Error creating card!
HDA Intel: probe of 0000:01:05.2 failed with error -12
FDC 0 is a post-1991 82077
lp0: using parport0 (interrupt-driven).
lp0: console ready
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:2031608k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: no IPv6 routers present
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
virbr0: no IPv6 routers present
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (irq_stat 0x40000001)
ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (irq_stat 0x40000001)
ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (irq_stat 0x40000001)
ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata1.00: configured for UDMA/133
ata1: EH complete
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (irq_stat 0x40000001)
ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (irq_stat 0x40000001)
ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: drive cache: write back
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: (irq_stat 0x40000001)
ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
From: Keir Fraser <Keir.Fraser@cl.cam.ac.uk>
To: Darryl Bowler <darryl.bowler@yahoo.com>; xen-devel@lists.xensource.com
Sent: Wednesday, December 19, 2007 10:14:50 AM
Subject: Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
The logs you sent in this email are unfortunately not very useful for this bug.
Please send us the output of ‘xm dmesg’ (this will get us the logs of Xen itself
booting) and also (if possible) the dmesg output of booting a native (non-Xen)
kernel.
-- Keir
On 19/12/07 16:06, "Darryl Bowler" <darryl.bowler@yahoo.com>
wrote:
No one could help me on the other dist lists. Can anyone shed light on this?
----- Forwarded Message ----
From: Darryl Bowler <darryl.bowler@yahoo.com>
To: fedora-xen@redhat.com; xen-users@lists.xensource.com
Sent: Monday, December 17, 2007 11:41:26 PM
Subject: AMD 64 X2 5200 - XEN only detects one core
I have an ACER AM3100-UD5200A which uses an AMD 64 X2 5200.
Xen only detects one of two cores
First I installed Fedora 8 + Xen that ships with the distro and found that only
one core was detected when DOM0 booted. Out of frustration I decided to install
CentOS 5.1 as a quick resolution to the problem, but found the same problem.
checking /proc/cpuinfo
there is only one core
[root@dom0 lib]# more /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 67
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
stepping : 2
cpu MHz : 2593.594
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush
mmx fxsr sse sse2 ht sysca
ll nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm
cr8_legacy
bogomips : 6485.48
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
Heres dmesg from CentOS
Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
Linux version 2.6.18-53.el5xen (mockbuild@builder6.centos.org) (gcc version
4.1.2 20070626 (Red Hat 4.1.2
-14)) #1 SMP Mon Nov 12 02:46:57 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000a5250000 (usable)
On node 0 totalpages: 676432
DMA zone: 676432 pages, LIFO batch:31
DMI 2.5 present.
ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0
ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe3000
ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe3080
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @
0x00000000affe7cc0
ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @
0x00000000affe7f80
ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @
0x00000000affe7fc0
ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe8140
ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @
0x00000000affe7c40
ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @
0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.Kernel command line: ro
root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2593.594 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff880004847000 - 0xffff880008847000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 2563840k/2705728k available (2357k kernel code, 133072k reserved, 1326k
data, 172k init)
Calibrating delay using timer specific routine.. 6485.48 BogoMIPS (lpj=12970967)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
ACPI: Core revision 20060707
Brought up 1 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at b4000000 (gap: b0000000:30000000)
Built 1 zonelists. Total pages: 676432
[2007-12-18 01:59:05 xend.XendDomainInfo 3028] DEBUG (XendDomainInfo:756)
Storing VM details: {''shadow_me
mory'': ''0'', ''uuid'':
''00000000-0000-0000-0000-000000000000'',
''on_reboot'': ''restart'',
''on_poweroff'': ''destr
oy'', ''name'': ''Domain-0'',
''xend/restart_count'': ''0'',
''vcpus'': ''1'',
''vcpu_avail'': ''1'',
''memory'': ''2635'', ''o
n_crash'': ''restart'', ''maxmem'':
''2635''}
Never miss a thing. Make Yahoo your homepage.
<http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs>
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Michael Heyse
2007-Dec-19 18:06 UTC
Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
Darryl Bowler schrieb:> Xen only detects one of two coresI experience a similar problem on a Intel Core Duo MacBook Pro and xen-unstable (3.2-rc2-pre from today). I use the following workaround: Boot a standard 2.6.23 kernel (which is able to detect both cores) without xen, then use kexec to boot xen with the 2.6.18-xen kernel. Sadly I can''t post a full `xm dmesg''. The kernel also fails to detect my USB harddrive from which I''m booting (booting from USB *does* work when I use the above workaround). But here''s a screenshot of Xen''s boot messages: http://www.boppstrasse.de/xen_cpu_fail.jpg After the 2.6.23 + kexec trick, when everything is working fine, `xm dmesg'' looks like this (I have to use noapic, otherwise it won''t boot at all): (XEN) Xen version 3.2.0-rc2-pre (root@mh-internal.net) (gcc version 4.2.2 (Gentoo 4.2.2 p1.0)) Wed Dec 19 17:59:17 CET 2007 (XEN) Latest ChangeSet: Wed Dec 19 09:51:35 2007 +0000 16633:7c98b9177b15 (XEN) Command line: noapic (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 0 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000ede00 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007f0c8000 (usable) (XEN) 000000007f0c8000 - 000000007f2c9000 (ACPI NVS) (XEN) 000000007f2c9000 - 000000007feb9000 (ACPI data) (XEN) 000000007feb9000 - 000000007feef000 (ACPI NVS) (XEN) 000000007feef000 - 000000007ff00000 (ACPI data) (XEN) 000000007ff00000 - 0000000080000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fed14000 - 00000000fed1a000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) System RAM: 2032MB (2081180kB) (XEN) Xen heap: 9MB (10084kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) PAE enabled, limit: 16 GB (XEN) Processor #0 6:14 APIC version 20 (XEN) Processor #1 6:14 APIC version 20 (XEN) Found and enabled local APIC! (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1997.372 MHz processor. (XEN) HVM: VMX enabled (XEN) CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 (XEN) Booting processor 1/1 eip 8c000 (XEN) CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 (XEN) Total of 2 processors activated. (XEN) Platform timer overflows in 14998 jiffies. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 2 CPUs (XEN) AMD IOMMU: Disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 32-bit, PAE, lsb (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04ba4fc (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003f000000->000000003f800000 (479601 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c04ba4fc (XEN) Init. ramdisk: c04bb000->c04bb000 (XEN) Phys-Mach map: c04bb000->c06915c4 (XEN) Start info: c0692000->c0692474 (XEN) Page tables: c0693000->c069c000 (XEN) Boot stack: c069c000->c069d000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) (XEN) Freed 96kB init memory. Cheers, Michael _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2007-Dec-20 11:12 UTC
Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
This might be an entirely different issue. Macs are a slightly different platform from IBM-compatible PC, and have quite different firmware, and that may affect SMP bringup. -- Keir On 19/12/07 18:06, "Michael Heyse" <mhk@designassembly.de> wrote:> Darryl Bowler schrieb: >> Xen only detects one of two cores > > I experience a similar problem on a Intel Core Duo MacBook Pro and > xen-unstable (3.2-rc2-pre from today). I use the following workaround: > Boot a standard 2.6.23 kernel (which is able to detect both cores) > without xen, then use kexec to boot xen with the 2.6.18-xen kernel. > > Sadly I can''t post a full `xm dmesg''. The kernel also fails to detect my > USB harddrive from which I''m booting (booting from USB *does* work when > I use the above workaround). But here''s a screenshot of Xen''s boot messages: > > http://www.boppstrasse.de/xen_cpu_fail.jpg > > After the 2.6.23 + kexec trick, when everything is working fine, `xm > dmesg'' looks like this (I have to use noapic, otherwise it won''t boot at > all): > > (XEN) Xen version 3.2.0-rc2-pre (root@mh-internal.net) (gcc version > 4.2.2 (Gentoo 4.2.2 p1.0)) Wed Dec 19 17:59:17 CET 2007 > (XEN) Latest ChangeSet: Wed Dec 19 09:51:35 2007 +0000 16633:7c98b9177b15 > (XEN) Command line: noapic > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 0 MBR signatures > (XEN) Found 2 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000ede00 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000007f0c8000 (usable) > (XEN) 000000007f0c8000 - 000000007f2c9000 (ACPI NVS) > (XEN) 000000007f2c9000 - 000000007feb9000 (ACPI data) > (XEN) 000000007feb9000 - 000000007feef000 (ACPI NVS) > (XEN) 000000007feef000 - 000000007ff00000 (ACPI data) > (XEN) 000000007ff00000 - 0000000080000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fec00000 - 00000000fec01000 (reserved) > (XEN) 00000000fed14000 - 00000000fed1a000 (reserved) > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) System RAM: 2032MB (2081180kB) > (XEN) Xen heap: 9MB (10084kB) > (XEN) Domain heap initialised: DMA width 32 bits > (XEN) PAE enabled, limit: 16 GB > (XEN) Processor #0 6:14 APIC version 20 > (XEN) Processor #1 6:14 APIC version 20 > (XEN) Found and enabled local APIC! > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 1997.372 MHz processor. > (XEN) HVM: VMX enabled > (XEN) CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz > stepping 08 > (XEN) Booting processor 1/1 eip 8c000 > (XEN) CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz > stepping 08 > (XEN) Total of 2 processors activated. > (XEN) Platform timer overflows in 14998 jiffies. > (XEN) Platform timer is 14.318MHz HPET > (XEN) Brought up 2 CPUs > (XEN) AMD IOMMU: Disabled > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 32-bit, PAE, lsb > (XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc04ba4fc > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 000000003f000000->000000003f800000 (479601 pages > to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c0100000->c04ba4fc > (XEN) Init. ramdisk: c04bb000->c04bb000 > (XEN) Phys-Mach map: c04bb000->c06915c4 > (XEN) Start info: c0692000->c0692474 > (XEN) Page tables: c0693000->c069c000 > (XEN) Boot stack: c069c000->c069d000 > (XEN) TOTAL: c0000000->c0800000 > (XEN) ENTRY ADDRESS: c0100000 > (XEN) Dom0 has maximum 2 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch > input to Xen) > (XEN) Freed 96kB init memory. > > Cheers, > Michael > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Keir Fraser
2007-Dec-20 11:14 UTC
Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core
I¹m not sure whether you are able to easily build and install more recent versions of Xen. In case not, please grab the xen.gz image from http://www.cl.cam.ac.uk/~kaf24/xen.gz and get GRUB to boot that image instead of the one provided with CentOS. This is a latest snapshot from the development tree. -- Keir On 19/12/07 16:54, "Darryl Bowler" <darryl.bowler@yahoo.com> wrote:> As Requested > > > Xen version 3.1.0-53.1.4.el5 (mockbuild@) (gcc version 4.1.2 20070626 (Red > Hat 4.1.2-14)) Fri Nov 30 00:37:12 EST 2007 > Latest ChangeSet: unavailable > > (XEN) Command line: /xen.gz-2.6.18-53.1.4.el5 > (XEN) 0000000000000000 - 000000000009f000 (usable) > (XEN) 000000000009f400 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000affe0000 (usable) > (XEN) 00000000affe0000 - 00000000affe3000 (ACPI NVS) > (XEN) 00000000affe3000 - 00000000afff0000 (ACPI data) > (XEN) 00000000afff0000 - 00000000b0000000 (reserved) > (XEN) 00000000e0000000 - 00000000f0000000 (reserved) > (XEN) 00000000fec00000 - 0000000100000000 (reserved) > (XEN) System RAM: 2815MB (2883068kB) > (XEN) Xen heap: 13MB (14184kB) > (XEN) Domain heap initialised: DMA width 32 bits > (XEN) Processor #0 15:3 APIC version 16 > (XEN) Processor #1 15:3 APIC version 16 > (XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2593.611 MHz processor. > (XEN) AMD SVM: ASIDs disabled. > (XEN) HVM: SVM enabled > (XEN) CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 > (XEN) Mapping cpu 0 to node 255 > (XEN) Booting processor 1/1 eip 90000 > (XEN) Not responding. > (XEN) Inquiring remote APIC #1... > (XEN) ... APIC #1 ID: 01000000 > (XEN) ... APIC #1 VERSION: 80050010 > (XEN) ... APIC #1 SPIV: 000000ff > (XEN) Unmapping cpu 1 from all nodes > (XEN) CPU #1 not responding - cannot use it. > (XEN) Total of 1 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) Platform timer is 14.318MHz HPET > (XEN) Brought up 1 CPUs > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2c3c58 > (XEN) elf_parse_binary: phdr: paddr=0xffffffff804c3c80 memsz=0x113270 > (XEN) elf_parse_binary: phdr: paddr=0xffffffff805d7000 memsz=0xc08 > (XEN) elf_parse_binary: phdr: paddr=0xffffffff805d8000 memsz=0x10af04 > (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff806e2f04 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000 > (XEN) elf_xen_parse_note: FEATURES > "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_p > gdir_above_4gb|supervisor_mode_kernel" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0xffffffff80000000 > (XEN) virt_offset = 0x0 > (XEN) virt_kstart = 0xffffffff80200000 > (XEN) virt_kend = 0xffffffff806e2f04 > (XEN) virt_entry = 0xffffffff80200000 > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> > 0xffffffff806e2f04 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 00000000aa000000->00000000ac000000 (666192 pages to be > allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff80200000->ffffffff806e2f04 > (XEN) Init. ramdisk: ffffffff806e3000->ffffffff80e63200 > (XEN) Phys-Mach map: ffffffff80e64000->ffffffff81389280 > (XEN) Start info: ffffffff8138a000->ffffffff8138a49c > (XEN) Page tables: ffffffff8138b000->ffffffff8139a000 > (XEN) Boot stack: ffffffff8139a000->ffffffff8139b000 > (XEN) TOTAL: ffffffff80000000->ffffffff81800000 > (XEN) ENTRY ADDRESS: ffffffff80200000 > (XEN) Dom0 has maximum 1 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804c3c58 > (XEN) elf_load_binary: phdr 1 at 0xffffffff804c3c80 -> 0xffffffff805d6ef0 > (XEN) elf_load_binary: phdr 2 at 0xffffffff805d7000 -> 0xffffffff805d7c08 > (XEN) elf_load_binary: phdr 3 at 0xffffffff805d8000 -> 0xffffffff80611388 > (XEN) Initrd len 0x780200, start at 0xffffffff806e3000 > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch > input to Xen). > > ---------------------------- > > Linux version 2.6.18-53.1.4.el5 (mockbuild@builder6.centos.org) (gcc version > 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 30 00:45:55 EST 2007 > Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000affe0000 (usable) > BIOS-e820: 00000000affe0000 - 00000000affe3000 (ACPI NVS) > BIOS-e820: 00000000affe3000 - 00000000afff0000 (ACPI data) > BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > DMI 2.5 present. > ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0 > ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe3000 > ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe3080 > ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ > 0x00000000affe7cc0 > ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @ > 0x00000000affe7f80 > ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @ > 0x00000000affe7fc0 > ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe8140 > ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ > 0x00000000affe7c40 > ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @ > 0x0000000000000000 > Scanning NUMA topology in Northbridge 24 > Number of nodes 1 > Node 0 MemBase 0000000000000000 Limit 00000000affe0000 > NUMA: Using 63 for the hash shift. > Using node hash shift of 63 > Bootmem setup node 0 0000000000000000-00000000affe0000 > Memory for crash kernel (0x0 to 0x0) notwithin permissible range > disabling kdump > On node 0 totalpages: 709663 > DMA zone: 2694 pages, LIFO batch:0 > DMA32 zone: 706969 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x4008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:3 APIC version 16 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:3 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to physical flat > ACPI: HPET id: 0x8300 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Nosave address range: 000000000009f000 - 00000000000a0000 > Nosave address range: 00000000000a0000 - 00000000000f0000 > Nosave address range: 00000000000f0000 - 0000000000100000 > Allocating PCI resources starting at b4000000 (gap: b0000000:30000000) > SMP: Allowing 2 CPUs, 0 hotplug CPUs > Built 1 zonelists. Total pages: 709663 > Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Checking aperture... > CPU 0: aperture @ 78a2000000 size 32 MB > Aperture too small (32 MB) > No AGP bridge found > Memory: 2829052k/2883456k available (2434k kernel code, 54016k reserved, 1235k > data, 192k init) > Calibrating delay using timer specific routine.. 5339.01 BogoMIPS > (lpj=2669506) > Security Framework v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 0/0 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > SMP alternatives: switching to UP code > ACPI: Core revision 20060707 > Using local APIC timer interrupts. > result 12471455 > Detected 12.471 MHz APIC timer. > SMP alternatives: switching to SMP code > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 5187.01 BogoMIPS > (lpj=2593508) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 1/1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 > CPU 1: Syncing TSC to CPU 0. > CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 617 cycles) > Brought up 2 CPUs > testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)! > time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer. > time.c: Detected 2594.059 MHz processor. > sizeof(vma)=176 bytes > sizeof(page)=56 bytes > sizeof(inode)=560 bytes > sizeof(dentry)=216 bytes > sizeof(ext3inode)=760 bytes > sizeof(buffer_head)=96 bytes > sizeof(skbuff)=240 bytes > migration_cost=435 > checking if image is initramfs... it is > Freeing initrd memory: 3109k freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG at e0000000 > PCI: No mmconfig possible on device 0:18 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 > Boot video device is 0000:01:05.0 > PCI: Transparent bridge - 0000:00:14.4 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 15 devices > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn''t work, try "pci=routeirq". If it helps, post a report > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0 > hpet0: 4 32-bit timers, 14318180 Hz > PCI-DMA: Disabling IOMMU. > pnp: 00:01: ioport range 0x4100-0x411f has been reserved > pnp: 00:01: ioport range 0x228-0x22f has been reserved > pnp: 00:01: ioport range 0x40b-0x40b has been reserved > pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved > pnp: 00:01: ioport range 0xc00-0xc01 has been reserved > pnp: 00:01: ioport range 0xc14-0xc14 has been reserved > pnp: 00:01: ioport range 0xc50-0xc52 has been reserved > pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved > PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0 > PCI: Bridge: 0000:00:01.0 > IO window: d000-dfff > MEM window: fdd00000-fdefffff > PREFETCH window: d0000000-dfffffff > PCI: Bridge: 0000:00:07.0 > IO window: e000-efff > MEM window: fdc00000-fdcfffff > PREFETCH window: fdf00000-fdffffff > PCI: Bridge: 0000:00:14.4 > IO window: c000-cfff > MEM window: fdb00000-fdbfffff > PREFETCH window: fda00000-fdafffff > PCI: Setting latency timer of device 0000:00:07.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > audit: initializing netlink socket (disabled) > audit(1198060862.578:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > Initializing Cryptographic API > ksign: Installing public key data > Loading keyring > - Added public key BF23BF4D1917253 > - User ID: CentOS (Kernel Module GPG key) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:07.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:07.0:pcie00] > Allocate Port Service[0000:00:07.0:pcie03] > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ACPI: Fan [FAN] (on) > ACPI: Thermal Zone [THRM] (46 C) > Real Time Clock Driver v1.12ac > hpet_resources: 0xfed00000 is busy > Non-volatile memory driver v1.2 > Linux agpgart interface v0.101 (c) Dave Jones > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > SB600_PATA: IDE controller at PCI slot 0000:00:14.1 > GSI 16 sharing vector 0xB9 and IRQ 16 > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 185 > SB600_PATA: chipset revision 0 > SB600_PATA: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:pio, hdb:pio > Probing IDE interface ide0... > Probing IDE interface ide0... > Probing IDE interface ide1... > ide-floppy driver 0.99.newide > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 > PNP: PS/2 controller doesn''t have KBD irq; using default 1 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > TCP bic registered > Initializing IPsec netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors > (2 cpu cores) (version 2.10.00) > powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xa > powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xc > powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xe > powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x10 > powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 > powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 > ACPI: (supports S0 S3 S4 S5) > Freeing unused kernel memory: 192k freed > Write protecting the kernel read-only data: 468k > USB Universal Host Controller Interface driver v3.0 > ohci_hcd: 2005 April 22 USB 1.1 ''Open'' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 185 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:13.0: irq 185, io mem 0xfe02e000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > GSI 17 sharing vector 0xC1 and IRQ 17 > ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 193 > ohci_hcd 0000:00:13.1: OHCI Host Controller > ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:13.1: irq 193, io mem 0xfe02d000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > GSI 18 sharing vector 0xC9 and IRQ 18 > ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 201 > ohci_hcd 0000:00:13.2: OHCI Host Controller > ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:13.2: irq 201, io mem 0xfe02c000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 193 > ohci_hcd 0000:00:13.3: OHCI Host Controller > ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:13.3: irq 193, io mem 0xfe02b000 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb 2-1: new low speed USB device using ohci_hcd and address 2 > ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 201 > ohci_hcd 0000:00:13.4: OHCI Host Controller > ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 > ohci_hcd 0000:00:13.4: irq 201, io mem 0xfe02a000 > usb 2-1: configuration #1 chosen from 1 choice > input: Logitech Optical USB Mouse as /class/input/input0 > input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > GSI 19 sharing vector 0xD1 and IRQ 19 > ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 209 > ehci_hcd 0000:00:13.5: EHCI Host Controller > ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 > ehci_hcd 0000:00:13.5: debug port 1 > ehci_hcd 0000:00:13.5: irq 209, io mem 0xfe029000 > ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 10 ports detected > SCSI subsystem initialized > libata version 2.21 loaded. > ahci 0000:00:12.0: version 2.2 > GSI 20 sharing vector 0xD9 and IRQ 20 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 217 > ahci 0000:00:12.0: controller can''t do 64bit DMA, forcing 32bit > usb 2-1: USB disconnect, address 2 > usb 2-1: new low speed USB device using ohci_hcd and address 4 > ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode > ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > ata1: SATA max UDMA/133 cmd 0xffffc20000028100 ctl 0x0000000000000000 bmdma > 0x0000000000000000 irq 217 > ata2: SATA max UDMA/133 cmd 0xffffc20000028180 ctl 0x0000000000000000 bmdma > 0x0000000000000000 irq 217 > ata3: SATA max UDMA/133 cmd 0xffffc20000028200 ctl 0x0000000000000000 bmdma > 0x0000000000000000 irq 217 > ata4: SATA max UDMA/133 cmd 0xffffc20000028280 ctl 0x0000000000000000 bmdma > 0x0000000000000000 irq 217 > usb 2-1: configuration #1 chosen from 1 choice > input: Logitech Optical USB Mouse as /class/input/input1 > input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1 > usb 2-2: new low speed USB device using ohci_hcd and address 5 > usb 2-2: configuration #1 chosen from 1 choice > input: Chicony USB Keyboard as /class/input/input2 > input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:13.1-2 > input: Chicony USB Keyboard as /class/input/input3 > input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on > usb-0000:00:13.1-2 > ohci_hcd 0000:00:13.2: wakeup > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-8: WDC WD5000AAJS-22YFA0, 12.01C02, max UDMA/133 > ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) > ata1.00: configured for UDMA/133 > usb 3-1: new full speed USB device using ohci_hcd and address 2 > ata2: SATA link down (SStatus 0 SControl 300) > usb 3-1: configuration #1 chosen from 1 choice > ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata3.00: ATAPI, max UDMA/66 > ata3.00: configured for UDMA/66 > ata4: SATA link down (SStatus 0 SControl 300) > Vendor: ATA Model: WDC WD5000AAJS-2 Rev: 12.0 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 sda4 < sda5 > > sd 0:0:0:0: Attached scsi disk sda > Vendor: Optiarc Model: DVD RW AD-7170S Rev: 1.01 > Type: CD-ROM ANSI SCSI revision: 05 > Initializing USB Mass Storage driver... > scsi4 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usbcore: registered new driver usb-storage > usb-storage: waiting for device to settle before scanning > USB Mass Storage support registered. > Vendor: Generic Model: USB SD Reader Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 00 > sd 4:0:0:0: Attached scsi removable disk sdb > Vendor: Generic Model: USB CF Reader Rev: 1.01 > Type: Direct-Access ANSI SCSI revision: 00 > sd 4:0:0:1: Attached scsi removable disk sdc > Vendor: Generic Model: USB SM Reader Rev: 1.02 > Type: Direct-Access ANSI SCSI revision: 00 > sd 4:0:0:2: Attached scsi removable disk sdd > Vendor: Generic Model: USB MS Reader Rev: 1.03 > Type: Direct-Access ANSI SCSI revision: 00 > sd 4:0:0:3: Attached scsi removable disk sde > usb-storage: device scan complete > device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: > dm-devel@redhat.com > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > audit(1198060879.953:2): selinux=0 auid=4294967295 > EDAC MC: Ver: 2.0.1 Nov 30 2007 > EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 > input: PC Speaker as /class/input/input4 > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > sd 0:0:0:0: Attached scsi generic sg0 type 0 > scsi 2:0:0:0: Attached scsi generic sg1 type 5 > sd 4:0:0:0: Attached scsi generic sg2 type 0 > sd 4:0:0:1: Attached scsi generic sg3 type 0 > sd 4:0:0:2: Attached scsi generic sg4 type 0 > sd 4:0:0:3: Attached scsi generic sg5 type 0 > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 2:0:0:0: Attached scsi CD-ROM sr0 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > 8139too Fast Ethernet driver 0.9.27 > GSI 21 sharing vector 0xE1 and IRQ 21 > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 225 > eth0: RealTek RTL8139 at 0xffffc2000002a000, 00:50:bf:d8:a0:a1, IRQ 225 > eth0: Identified 8139 chip type ''RTL-8139C'' > 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) > ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 185 > hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... > cannot find the slot for index 0 (range 0-0), error: -16 > hda-intel: Error creating card! > HDA Intel: probe of 0000:01:05.2 failed with error -12 > FDC 0 is a post-1991 82077 > lp0: using parport0 (interrupt-driven). > lp0: console ready > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [PWRB] > ibm_acpi: ec object not found > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > device-mapper: multipath: version 1.0.5 loaded > EXT3 FS on dm-0, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 > across:2031608k > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > Bluetooth: Core ver 2.10 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > Bluetooth: HIDP (Human Interface Emulation) ver 1.1 > Bridge firewalling registered > ip_tables: (C) 2000-2006 Netfilter Core Team > eth0: no IPv6 routers present > Netfilter messages via NETLINK v0.30. > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack > virbr0: no IPv6 routers present > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > ata1.00: (irq_stat 0x40000001) > ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 > res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) > ata1.00: configured for UDMA/133 > ata1: EH complete > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > ata1.00: (irq_stat 0x40000001) > ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 > res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) > ata1.00: configured for UDMA/133 > ata1: EH complete > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > ata1.00: (irq_stat 0x40000001) > ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 > res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) > ata1.00: configured for UDMA/133 > ata1: EH complete > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > ata1.00: (irq_stat 0x40000001) > ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 > res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) > ata1.00: configured for UDMA/133 > ata1: EH complete > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > ata1.00: (irq_stat 0x40000001) > ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 > res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) > ata1.00: configured for UDMA/133 > ata1: EH complete > SCSI device sda: drive cache: write back > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > ata1.00: (irq_stat 0x40000001) > ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 > res 51/04:01:b4:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) > ata1.00: configured for UDMA/133 > ata1: EH complete > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > > > > From: Keir Fraser <Keir.Fraser@cl.cam.ac.uk> > To: Darryl Bowler <darryl.bowler@yahoo.com>; xen-devel@lists.xensource.com > Sent: Wednesday, December 19, 2007 10:14:50 AM > Subject: Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core > > Re: [Xen-devel] Fw: AMD 64 X2 5200 - XEN only detects one core The logs you > sent in this email are unfortunately not very useful for this bug. Please send > us the output of xm dmesg¹ (this will get us the logs of Xen itself booting) > and also (if possible) the dmesg output of booting a native (non-Xen) kernel. > > -- Keir > > On 19/12/07 16:06, "Darryl Bowler" <darryl.bowler@yahoo.com> wrote: > >> No one could help me on the other dist lists. Can anyone shed light on this? >> >> ----- Forwarded Message ---- >> From: Darryl Bowler <darryl.bowler@yahoo.com> >> To: fedora-xen@redhat.com; xen-users@lists.xensource.com >> Sent: Monday, December 17, 2007 11:41:26 PM >> Subject: AMD 64 X2 5200 - XEN only detects one core >> >> I have an ACER AM3100-UD5200A which uses an AMD 64 X2 5200. >> >> Xen only detects one of two cores >> >> First I installed Fedora 8 + Xen that ships with the distro and found that >> only one core was detected when DOM0 booted. Out of frustration I decided to >> install CentOS 5.1 as a quick resolution to the problem, but found the same >> problem. >> >> >> checking /proc/cpuinfo >> there is only one core >> [root@dom0 lib]# more /proc/cpuinfo >> processor : 0 >> vendor_id : AuthenticAMD >> cpu family : 15 >> model : 67 >> model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ >> stepping : 2 >> cpu MHz : 2593.594 >> cache size : 1024 KB >> physical id : 0 >> siblings : 1 >> core id : 0 >> cpu cores : 1 >> fpu : yes >> fpu_exception : yes >> cpuid level : 1 >> wp : yes >> flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 >> clflush mmx fxsr sse sse2 ht sysca >> ll nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm >> cr8_legacy >> bogomips : 6485.48 >> TLB size : 1024 4K pages >> clflush size : 64 >> cache_alignment : 64 >> address sizes : 40 bits physical, 48 bits virtual >> power management: ts fid vid ttp tm stc >> >> >> Heres dmesg from CentOS >> >> Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) >> Linux version 2.6.18-53.el5xen (mockbuild@builder6.centos.org) (gcc version >> 4.1.2 20070626 (Red Hat 4.1.2 >> -14)) #1 SMP Mon Nov 12 02:46:57 EST 2007 >> BIOS-provided physical RAM map: >> Xen: 0000000000000000 - 00000000a5250000 (usable) >> On node 0 totalpages: 676432 >> DMA zone: 676432 pages, LIFO batch:31 >> DMI 2.5 present. >> ACPI: RSDP (v002 ACRSYS ) @ 0x00000000000f80c0 >> ACPI: RSDT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ >> 0x00000000affe3000 >> ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ >> 0x00000000affe3080 >> ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ >> 0x00000000affe7cc0 >> ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @ >> 0x00000000affe7f80 >> ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @ >> 0x00000000affe7fc0 >> ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ >> 0x00000000affe8140 >> ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ >> 0x00000000affe7c40 >> ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @ >> 0x0000000000000000 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> ACPI: IRQ0 used by override.Kernel command line: ro >> root=/dev/VolGroup00/LogVol00 rhgb quiet >> Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 32768 bytes) >> Xen reported: 2593.594 MHz processor. >> Console: colour VGA+ 80x25 >> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> Software IO TLB enabled: >> Aperture: 64 megabytes >> Kernel range: 0xffff880004847000 - 0xffff880008847000 >> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> Memory: 2563840k/2705728k available (2357k kernel code, 133072k reserved, >> 1326k data, 172k init) >> Calibrating delay using timer specific routine.. 6485.48 BogoMIPS >> (lpj=12970967) >> Security Framework v1.0.0 initialized >> SELinux: Initializing. >> SELinux: Starting in permissive mode >> selinux_register_security: Registering secondary module capability >> Capability LSM initialized as secondary >> Mount-cache hash table entries: 256 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 1024K (64 bytes/line) >> CPU: Physical Processor ID: 0 >> CPU: Processor Core ID: 0 >> (SMP-)alternatives turned off >> ACPI: Core revision 20060707 >> Brought up 1 CPUs >> sizeof(vma)=168 bytes >> sizeof(page)=56 bytes >> sizeof(inode)=560 bytes >> sizeof(dentry)=216 bytes >> sizeof(ext3inode)=760 bytes >> sizeof(buffer_head)=96 bytes >> sizeof(skbuff)=240 bytes >> >> ACPI: IRQ2 used by override. >> ACPI: IRQ9 used by override. >> Setting APIC routing to xen >> Using ACPI (MADT) for SMP configuration information >> Allocating PCI resources starting at b4000000 (gap: b0000000:30000000) >> Built 1 zonelists. Total pages: 676432 >> >> >> >> >> >> [2007-12-18 01:59:05 xend.XendDomainInfo 3028] DEBUG (XendDomainInfo:756) >> Storing VM details: {''shadow_me >> mory'': ''0'', ''uuid'': ''00000000-0000-0000-0000-000000000000'', ''on_reboot'': >> ''restart'', ''on_poweroff'': ''destr >> oy'', ''name'': ''Domain-0'', ''xend/restart_count'': ''0'', ''vcpus'': ''1'', >> ''vcpu_avail'': ''1'', ''memory'': ''2635'', ''o >> n_crash'': ''restart'', ''maxmem'': ''2635''} >> >> >> >> >> >> >> Never miss a thing. Make Yahoo your homepage. >> <http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs> >> >> >> >> >> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it >> now. >> <http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8H >> DtDypao8Wcj9tAcJ > >> <http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8H >> DtDypao8Wcj9tAcJ%20> >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel > > > > > > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it > now. > <http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HD > tDypao8Wcj9tAcJ >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel