I have an error that''s preventing me from booting x86_64 xen on EM64T.
I get the following error:
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
I can build/boot the same code on a AMD box with exact same kernel
config. Could this be an interrupt delivery problem? Below is the
boot log.
-Andrew
Xen version 3.0-devel (root@ltc.austin.ibm.com) (gcc version 3.4.2
20041017 (Red Hat 3.4.2-6.fc3)) Mon Aug 15 14:18:17 CDT 2005
Latest ChangeSet: Mon Aug 15 10:34:23 2005
f11a31ad22d5d6c594664966ef3a4fb3758478eb
(XEN) Truncating memory map to 3145728kB
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009d400 (usable)
(XEN) 000000000009d400 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000c0000000 (usable)
(XEN) System RAM: 3071MB (3145332kB)
(XEN) Xen heap: 14MB (14668kB)
(XEN) found SMP MP-table at 0009d540
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 IBM ) @
0x00000000000fdfc0
(XEN) ACPI: RSDT (v001 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x00000000d7fcff80
(XEN) ACPI: FADT (v002 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x00000000d7fcfec0
(XEN) ACPI: MADT (v001 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x00000000d7fcfe00
(XEN) ACPI: MCFG (v001 IBM SERBLADE 0x00001000 IBM 0x45444f43) @
0x00000000d7fcfdc0
(XEN) ACPI: DSDT (v001 IBM SERBLADE 0x00001000 INTL 0x02002025) @
0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
(XEN) Processor #7 15:4 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 13, version 32, address 0xfec10000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x0c] address[0xfec81000] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
(XEN) ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
(XEN) IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ11 used by override.
(XEN) Enabling APIC mode: Flat. Using 4 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3600.306 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU0: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
(XEN) Booting processor 2/6 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
(XEN) Booting processor 3/7 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU3: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 4 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80000000,LOADER=generic''
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000007000000->0000000008000000 (225280 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80100000->ffffffff805be086
(XEN) Init. ramdisk: ffffffff805bf000->ffffffff80742200
(XEN) Phys-Mach map: ffffffff80743000->ffffffff80823000
(XEN) Page tables: ffffffff80823000->ffffffff8082c000
(XEN) Start info: ffffffff8082c000->ffffffff8082d000
(XEN) Boot stack: ffffffff8082d000->ffffffff8082e000
(XEN) TOTAL: ffffffff80000000->ffffffff80c00000
(XEN) ENTRY ADDRESS: ffffffff80100000
(XEN) Initrd len 0x183200, start at 0xffffffff805bf000
(XEN) Scrubbing Free RAM: ...............................done.
(XEN) *** Serial input -> DOM0 (type ''CTRL-w'' three times
to switch
input to Xen).
Linux version 2.6.12-xen0-up (root@hs20-1.ltc.austin.ibm.com) (gcc
version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #2
Mon Aug 15 14:26:28 CDT 2005
kernel direct mapping tables upto ffff880038000000 @ c00000-dc2000
No mptable found.
Allocating PCI resources starting at 38000000 (gap: 38000000:c8000000)
Built 1 zonelists
Kernel command line: ro root=/dev/sda2 console=ttyS0,115200n81
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 3600.122 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 888576k/917504k available (2885k kernel code, 14256k reserved,
1128k data, 276k init)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
Grant table initialized
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Initializing Cryptographic API
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.6)
pcnet32.c:v1.30j 29.04.2005 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
WARNING: Failed to register Xen virtual console driver as
''ttyS0''
Event-channel device installed.
Blkif backend is using grant tables.
Initialising Xen netif backend
#### netback tx using grant tables
#### netback rx using grant tables
Blkif frontend is using grant tables.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ICH5: neither IDE port enabled (BIOS)
Red Hat/Adaptec aacraid driver (1.1.2-lk2 Aug 15 2005)
3ware Storage Controller device driver for Linux v1.26.02.001.
Fusion MPT base driver 3.01.20
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel