Pasi Kärkkäinen
2004-Oct-21 12:59 UTC
[Xen-devel] Domain0 kernels crashing while loading e100 module
Hi again!
I''m using the latest Debian xen 2 packages for Debian 3.1
(sarge/testing) from Brian Wolfe.
Hardware is Compaq Proliant DL360 server. It has Serverworks chipset, intel
etherexpress pro/100 network card (e100), cpqarray raid and dual Intel P3 / 1
GHz
processors.
The problem happens with both 2.6.8 and 2.4.27 xen domain0 kernels.
If I add e100 module to /etc/modules, for loading it automatically in
the beginning of the boot process, the domain0 crashes during the bootup
when loading the module.
Nothing on the screen, just the normal bootup messages for stuff that has
been done before loading the modules. Powercycle needed to get it booting
(or crashing ;) again. This crash happens during every boot.
Now the weird thing is, If I move the module-init-tools script to the
end of the bootup process (by renaming the /etc/rcS.d/SXXmodule-init-tools
link), the system boots up OK without crashing..
So something that is ran during the bootup enables the e100 module to load
without crashing.. any ideas what that might be? Somebody seeing the same?
I have already disabled the default hotplug and discover scripts from the bootup
sequence.. they seem to have no effect to this problem.
Thanks!
-- Pasi Kärkkäinen
^
. .
Linux
/ - \
Choice.of.the
.Next.Generation.
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel
Pasi Kärkkäinen
2004-Oct-21 13:42 UTC
Re: [Xen-devel] Domain0 kernels crashing while loading e100 module
On Thu, Oct 21, 2004 at 03:59:35PM +0300, Pasi Kärkkäinen wrote:> Hi again! > > I''m using the latest Debian xen 2 packages for Debian 3.1 (sarge/testing) from Brian Wolfe. > > Hardware is Compaq Proliant DL360 server. It has Serverworks chipset, intel > etherexpress pro/100 network card (e100), cpqarray raid and dual Intel P3 / 1 GHz > processors. > > The problem happens with both 2.6.8 and 2.4.27 xen domain0 kernels. > > If I add e100 module to /etc/modules, for loading it automatically in > the beginning of the boot process, the domain0 crashes during the bootup > when loading the module. > > Nothing on the screen, just the normal bootup messages for stuff that has > been done before loading the modules. Powercycle needed to get it booting > (or crashing ;) again. This crash happens during every boot. > > Now the weird thing is, If I move the module-init-tools script to the > end of the bootup process (by renaming the /etc/rcS.d/SXXmodule-init-tools > link), the system boots up OK without crashing.. > > So something that is ran during the bootup enables the e100 module to load > without crashing.. any ideas what that might be? Somebody seeing the same? > > I have already disabled the default hotplug and discover scripts from the bootup > sequence.. they seem to have no effect to this problem. >I did some testing, and the problem is this: If the networking-script (which enables rp_filter, ip_forwarding, syncookies and does ifup -a) is ran _before_ loading network driver modules, then the network modules (e100) will load successfully without crashing. In this case the interface is left unconfigured because the network driver is not loaded when the networking-script is run. But, if the e100-module is loaded first (before the networking-script is ran, the normal case), then the domain0 kernel crashes while loading the module.. So networking-script does something, which enabled the e100 module to load without crashing.. any ideas? -- Pasi Kärkkäinen ^ . . Linux / - \ Choice.of.the .Next.Generation. ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Xen-devel mailing list Xen-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xen-devel
Brian Wolfe
2004-Oct-21 21:34 UTC
Re: [Xen-devel] Domain0 kernels crashing while loading e100 module
Strange, it sounds like the e100 modules themselves at first glance are at fault. Does a native kernel do this crash and burn, or is it just the xenlinux kernel? Under debian I do advise a different network script when xend is started. The curent one seems to have issues (randomly, oddly enough) with the ipv6 being loaded. My fix was to setup eth0 as static, auto, and xen-br0 as static, no auto, then have network script run ifup eth0 && ifconfig eth1 0.0.0.0. Can you post the kernel OOPS message that you are getting on auto-loading? On Thu, 2004-10-21 at 08:42, Pasi Kärkkäinen wrote:> On Thu, Oct 21, 2004 at 03:59:35PM +0300, Pasi Kärkkäinen wrote: > > Hi again! > > > > I''m using the latest Debian xen 2 packages for Debian 3.1 (sarge/testing) from Brian Wolfe. > > > > Hardware is Compaq Proliant DL360 server. It has Serverworks chipset, intel > > etherexpress pro/100 network card (e100), cpqarray raid and dual Intel P3 / 1 GHz > > processors. > > > > The problem happens with both 2.6.8 and 2.4.27 xen domain0 kernels. > > > > If I add e100 module to /etc/modules, for loading it automatically in > > the beginning of the boot process, the domain0 crashes during the bootup > > when loading the module. > > > > Nothing on the screen, just the normal bootup messages for stuff that has > > been done before loading the modules. Powercycle needed to get it booting > > (or crashing ;) again. This crash happens during every boot. > > > > Now the weird thing is, If I move the module-init-tools script to the > > end of the bootup process (by renaming the /etc/rcS.d/SXXmodule-init-tools > > link), the system boots up OK without crashing.. > > > > So something that is ran during the bootup enables the e100 module to load > > without crashing.. any ideas what that might be? Somebody seeing the same? > > > > I have already disabled the default hotplug and discover scripts from the bootup > > sequence.. they seem to have no effect to this problem. > > > > I did some testing, and the problem is this: > > If the networking-script (which enables rp_filter, ip_forwarding, syncookies > and does ifup -a) is ran _before_ loading network driver modules, then the network > modules (e100) will load successfully without crashing. In this case the > interface is left unconfigured because the network driver is not loaded when the > networking-script is run. > > But, if the e100-module is loaded first (before the networking-script is > ran, the normal case), then the domain0 kernel crashes while loading the module.. > > So networking-script does something, which enabled the e100 module to load > without crashing.. any ideas? > > -- Pasi Kärkkäinen > > ^ > . . > Linux > / - \ > Choice.of.the > .Next.Generation. > > > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal > Use IT products in your business? Tell us what you think of them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xen-devel------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Xen-devel mailing list Xen-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xen-devel
Pasi Kärkkäinen
2004-Oct-25 09:23 UTC
Re: [Xen-devel] Domain0 kernels crashing while loading e100 module
On Thu, Oct 21, 2004 at 04:34:18PM -0500, Brian Wolfe wrote:> Strange, it sounds like the e100 modules themselves at first glance are > at fault. Does a native kernel do this crash and burn, or is it just the > xenlinux kernel? >Native Linux-kernel without Xen works well, and doesn''t crash. So it''s only the Xenlinux kernel that crashes while loading the e100-module..> Under debian I do advise a different network script when xend is > started. The curent one seems to have issues (randomly, oddly enough) > with the ipv6 being loaded. My fix was to setup eth0 as static, auto, > and xen-br0 as static, no auto, then have network script run ifup eth0 > && ifconfig eth1 0.0.0.0. >OK..> Can you post the kernel OOPS message that you are getting on > auto-loading? >I''ll check the logs or reboot (and crash) the machine later when I can :) - Pasi Kärkkäinen> On Thu, 2004-10-21 at 08:42, Pasi Kärkkäinen wrote: > > On Thu, Oct 21, 2004 at 03:59:35PM +0300, Pasi Kärkkäinen wrote: > > > Hi again! > > > > > > I''m using the latest Debian xen 2 packages for Debian 3.1 (sarge/testing) from Brian Wolfe. > > > > > > Hardware is Compaq Proliant DL360 server. It has Serverworks chipset, intel > > > etherexpress pro/100 network card (e100), cpqarray raid and dual Intel P3 / 1 GHz > > > processors. > > > > > > The problem happens with both 2.6.8 and 2.4.27 xen domain0 kernels. > > > > > > If I add e100 module to /etc/modules, for loading it automatically in > > > the beginning of the boot process, the domain0 crashes during the bootup > > > when loading the module. > > > > > > Nothing on the screen, just the normal bootup messages for stuff that has > > > been done before loading the modules. Powercycle needed to get it booting > > > (or crashing ;) again. This crash happens during every boot. > > > > > > Now the weird thing is, If I move the module-init-tools script to the > > > end of the bootup process (by renaming the /etc/rcS.d/SXXmodule-init-tools > > > link), the system boots up OK without crashing.. > > > > > > So something that is ran during the bootup enables the e100 module to load > > > without crashing.. any ideas what that might be? Somebody seeing the same? > > > > > > I have already disabled the default hotplug and discover scripts from the bootup > > > sequence.. they seem to have no effect to this problem. > > > > > > > I did some testing, and the problem is this: > > > > If the networking-script (which enables rp_filter, ip_forwarding, syncookies > > and does ifup -a) is ran _before_ loading network driver modules, then the network > > modules (e100) will load successfully without crashing. In this case the > > interface is left unconfigured because the network driver is not loaded when the > > networking-script is run. > > > > But, if the e100-module is loaded first (before the networking-script is > > ran, the normal case), then the domain0 kernel crashes while loading the module.. > > > > So networking-script does something, which enabled the e100 module to load > > without crashing.. any ideas? > > > > -- Pasi Kärkkäinen > > > > ^ > > . . > > Linux > > / - \ > > Choice.of.the > > .Next.Generation. > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal > > Use IT products in your business? Tell us what you think of them. Give us > > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more > > http://productguide.itmanagersjournal.com/guidepromo.tmpl > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xen-devel > > > > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal > Use IT products in your business? Tell us what you think of them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xen-devel------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ Xen-devel mailing list Xen-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xen-devel