thr3ads.net - Xen devel - [Xen-devel] booting on a Compaq Proliant 1600 [Jun 2004]

If this information is useful, please help other people find it:
Share via:

James Harper

2004-Jun-11 12:24 UTC

[Xen-devel] booting on a Compaq Proliant 1600

Hi all!

I''m trying to test Xen on a Compaq Proliant 1600 (P2@350Mhz) but it
just
reboots on startup.

It appears to start Xen up okay, then I see Domain0 start to boot and
the last thing I see before the screen goes blank is ''Calibrating Delay
Loop...''. The fact that I see that means that it probably prints
''xxx.xx
bogomips'' and then next bit before it actually crashes.

I think the next thing it gets to is the report on available memory and
then a report on the cpu. 

I have tried the ''ignorebiostables'' option to xen with no
luck. I have
also tried both the debian default 1.2 version and the debian 1.3
package available at http://www.terrabox.com/debian/. Both fail in the
same way.

Anything obvious anyone can suggest? Is there a list of supported
hardware somewhere?

Tia

James



-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield
X.>From Windows to Linux, servers to mobile, InstallShield X is theone installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel

James Harper

2004-Jun-11 12:31 UTC

head link

[Xen-devel] booting on a Compaq Proliant 1600

(This might end up arriving twice as I sent it from the wrong email
address. Much apologies if this occurs)

Hi all!

I''m trying to test Xen on a Compaq Proliant 1600 (P2@350Mhz) but it
just
reboots on startup.

It appears to start Xen up okay, then I see Domain0 start to boot and
the last thing I see before the screen goes blank is ''Calibrating Delay
Loop...''. The fact that I see that means that it probably prints
''xxx.xx
bogomips'' and then next bit before it actually crashes.

I think the next thing it gets to is the report on available memory and
then a report on the cpu. 

I have tried the ''ignorebiostables'' option to xen with no
luck. I have
also tried both the debian default 1.2 version and the debian 1.3
package available at http://www.terrabox.com/debian/. Both fail in the
same way.

Anything obvious anyone can suggest? Is there a list of supported
hardware somewhere?

Tia

James



-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield
X.>From Windows to Linux, servers to mobile, InstallShield X is theone installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel

Ian Pratt

2004-Jun-11 21:43 UTC

head link

Re: [Xen-devel] booting on a Compaq Proliant 1600

> I''m trying to test Xen on a Compaq Proliant 1600 (P2@350Mhz) but
it just
> reboots on startup.
> 
> It appears to start Xen up okay, then I see Domain0 start to boot and
> the last thing I see before the screen goes blank is ''Calibrating
Delay
> Loop...''. The fact that I see that means that it probably prints
''xxx.xx
> bogomips'' and then next bit before it actually crashes.
> 
> I think the next thing it gets to is the report on available memory and
> then a report on the cpu. 
Interesting -- I haven''t heard of anything like this.

How much memory does the machine have? How much memory are you
starting dom0 with (on the xen command line)? Have you tried
varying this?

Please can you post the dmesg output of an SMP linux kernel
booting on the same machine.

Do you get a crash message out or does it just reboot? Could you
hook up a serial line to the machine (and configure xen with a
serial console) to capture the xen and domain0 boot messages?
> Anything obvious anyone can suggest? Is there a list of supported
> hardware somewhere?
It doesn''t sound like a driver issue, and Xen should work on
anything newer than a PPro.

Ian






-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield
X.>From Windows to Linux, servers to mobile, InstallShield X is theone installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel

James Harper

2004-Jun-12 04:04 UTC

head link

RE: [Xen-devel] booting on a Compaq Proliant 1600

I am starting Xen with the following GRUB configuration:

title Xen
kernel /xen.gz dom0_mem=131072 ser_baud=115200 ignorebiostables ifname=dummy
module /xenolinux.gz root=/dev/discs/disc0/part6 ro console=tty0

If there is a crash message then it's too quick for me to see, I will try
and attempt a serial capture of the boot process tonight.

Here's the dmesg output of a UP kernel. I will also load a SMP kernel
tonight and send you that.

thanks for the speedy response.

James

Linux version 2.4.26-1-686 (herbert@gondolin) (gcc version 3.3.3 (Debian
20040401)) #1 Sat May 1 18:04:05 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
448MB LOWMEM available.
On node 0 totalpages: 114688
zone(0): 4096 pages.
zone(1): 110592 pages.
zone(2): 0 pages.
DMI not present.
ACPI: Unable to locate RSDP
Kernel command line: root=/dev/discs/disc0/part6 ro devfs=mount 
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 349.188 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 696.32 BogoMIPS
Memory: 446504k/458752k available (1220k kernel code, 11860k reserved, 459k
data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 349.1846 MHz.
..... host bus clock speed is 99.7667 MHz.
cpu: 0, clocks: 997667, slice: 498833
CPU0<T0:997664,T1:498816,D:15,S:498833,C:997667>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf0080, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4368 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 4368k freed
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 112k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Compaq SMART2 Driver (v 2.4.28)
cpqarray: Device 0xae10 has been found at bus 2 dev 0 func 0
cpqarray: Finding drives on ida0 (SMART-2SL)
cpqarray ida/c0d0: blksz=512 nr_blks=53309280
blk: queue c02edac0, I/O limit 4095Mb (mask 0xffffffff)
Partition check:
 ida/c0d0: p1 p2 p3 < p5 p6 >
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 501816k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ida0(72,6), internal journal
Real Time Clock Driver v1.10f
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  originally by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/natsemi.html
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xdc88b000, 00:40:f4:5f:cf:f2, IRQ 15.
eth1: NatSemi DP8381[56] at 0xdc88d000, 00:40:f4:5f:cf:95, IRQ 15.
eth2: NatSemi DP8381[56] at 0xdc88f000, 00:40:f4:5f:cf:05, IRQ 5.
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
GRE over IPv4 tunneling driver
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ida0(72,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET4: Ethernet Bridge 008 for NET4.0



-----Original Message-----
From: Ian Pratt [mailto:Ian.Pratt@cl.cam.ac.uk]
Sent: Sat 12/06/2004 7:43 AM
To: James Harper
Cc: xen-devel@lists.sourceforge.net; Ian.Pratt@cl.cam.ac.uk
Subject: Re: [Xen-devel] booting on a Compaq Proliant 1600
 
> I'm trying to test Xen on a Compaq Proliant 1600 (P2@350Mhz) but it
just
> reboots on startup.
> 
> It appears to start Xen up okay, then I see Domain0 start to boot and
> the last thing I see before the screen goes blank is 'Calibrating Delay
> Loop...'. The fact that I see that means that it probably prints
'xxx.xx
> bogomips' and then next bit before it actually crashes.
> 
> I think the next thing it gets to is the report on available memory and
> then a report on the cpu. 
Interesting -- I haven't heard of anything like this.

How much memory does the machine have? How much memory are you
starting dom0 with (on the xen command line)? Have you tried
varying this?

Please can you post the dmesg output of an SMP linux kernel
booting on the same machine.

Do you get a crash message out or does it just reboot? Could you
hook up a serial line to the machine (and configure xen with a
serial console) to capture the xen and domain0 boot messages?
> Anything obvious anyone can suggest? Is there a list of supported
> hardware somewhere?
It doesn't sound like a driver issue, and Xen should work on
anything newer than a PPro.

Ian

Ian Pratt

2004-Jun-12 07:58 UTC

head link

Re: [Xen-devel] booting on a Compaq Proliant 1600

> I am starting Xen with the following GRUB configuration:
> 
> title Xen
> kernel /xen.gz dom0_mem=131072 ser_baud=115200 ignorebiostables
ifname=dummy
> module /xenolinux.gz root=/dev/discs/disc0/part6 ro console=tty0
Our default kernel build doesn''t include devfs, so I''m not
sure
whether using that syntax for root= will work. Have you tried
''hda6'' (or should that be hda7 for part6, I can''t
remember)?

More importantly, the default Xen build doesn''t contain support
for your cpqarray controller, or your Nat Semi DP83816 ethernet
controller.

That means that you''re going to have to build your own
bleeding edge xeno-unstable.bk tree. 

 bk clone bk://xen.bkbits.net/xeno-unstable.bk
 cd xeno-unstable.bk
 make -j4 world

The above will give you a default build of everything, populating
the ''install'' directory. You''re then going to
configure the linux
kernel that is used for domain 0.

 cd linux-2.4.26-xen
 ARCH=xen make xen0_config  (this copies arch/xen/defconfig-xen0 to defconfig)
 ARCH=xen make xconfig      <enable cpqarray and dp83816>
 ARCH=xen make dep
 ARCH=xen make bzImage
 ARCH=xen INSTALL_NAME=2.4.26-xen0 make dist
 cd ..

[for reference, the last step does the following:]
 cp arch/xen/boot/bzImage ../install/boot/vmlinuz-2.4.26-xen0
 cp vmlinux ../install/boot/vmlinux-syms-2.4.26-xen0
 cp .config ../install/boot/config-2.4.26-xen0

You should then be able to install these kernels and binaries
with ''make install''.

You''ll need to edit your grub.conf to replace
''xenolinux.gz'' with
''vmlinuz-2.4.26-xen0'' to follow the normal linux convention.

Boot it, and let me know how you get on!
> If there is a crash message then it''s too quick for me to see, I
will try and attempt a serial capture of the boot process tonight.
You can use ''noreboot'' to stop it rebooting, though capturing
the
serial output will make life much easier.


Ian


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield
X.>From Windows to Linux, servers to mobile, InstallShield X is theone installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel

Xen devel - Jun 2004 - booting on a Compaq Proliant 1600

[Xen-devel] booting on a Compaq Proliant 1600

[Xen-devel] booting on a Compaq Proliant 1600

Re: [Xen-devel] booting on a Compaq Proliant 1600

RE: [Xen-devel] booting on a Compaq Proliant 1600

Re: [Xen-devel] booting on a Compaq Proliant 1600