> I want to add many ip addresses from the config file.
> I tried this:
>
> cmdline_ip =
"ip="+vfr_ipaddr[0]+":"+nfsserv+":"+gateway+":"+netmask+"::eth0"+vfr_ipaddr[1]+":"+nfsserv+":"+gateway+":"+netmask+"::eth0:60"
>
> But I get the following error:
> IP-Config: Device `eth0192.168.250'' not found.
I''m afraid this is a standard Linux limitation : it''s only
possible to configure one IP address on the kernel command line.
Further addresses have to be configured manually, or by the
/etc/rc scripts. Under RH9, the normal way of doing this would be
to create an /etc/sysconfig/network-scripts/ifcfg-eth0:60 file
something like:
DEVICE=eth0:60
IPADDR=192.168.250.60
Ian
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel