The development tree now contains support for limiting the network transmission rate of individual virtual network interfaces (vif''s). The default is no rate limiting. To set rate limiting for a vif, use: xi_vif_params <domain id> <vif idx> <credit bytes> <credit usec> This allows the VIF to transmit <credit-bytes> bytes every <credit-usec> microseconds. To see the current limit for a vif, use: xi_vif_params <domain id> <vif idx> This will display the current rate-limit parameters, and estimate likely network throughput in Mbps (units == 2^20 bits per second). TODO: Integrate this with xenctl. Currently, x_vif_params must be run independently, after initialising a domain with xenctl. Hope this is useful, Keir ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ Xen-devel mailing list Xen-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xen-devel