Hi, I''m Xen to do my Final Project in the University. My goal is to test Xen as virtual router and also test it as VLAN server. I''m trying to test this environments with Iperf and monitoring Dom0 and DomU CPU''s with SNMP. My problem is with de virtual interfaces. I''ve been tested the packet rate using DomU as router, and physical machines as client and server with Iperf. If I configure the physical interfaces directly to the DomU, there are no problem. The DomU see that as 100Mb/s interfaces and the packet rate is the same that in a physical linux router. The problem is when I configure the network with bridged. The virtual interfaces apears on DomU as 10Mb/s and the packet rate is limited aprox. in 14.000 pack/s without CPU o RAM saturation. See the snmpwalk of IfHighSpeed in DomU(Dom_id=2) and Dom0 Dom0 IF-MIB::ifName.2 = STRING: peth0 IF-MIB::ifName.3 = STRING: peth1 IF-MIB::ifName.4 = STRING: peth2 IF-MIB::ifHighSpeed.2 = Gauge32: 100 IF-MIB::ifHighSpeed.3 = Gauge32: 100 IF-MIB::ifHighSpeed.4 = Gauge32: 100 IF-MIB::ifName.5 = STRING: vif0.0 IF-MIB::ifName.7 = STRING: vif0.1 IF-MIB::ifName.9 = STRING: vif0.2 IF-MIB::ifHighSpeed.5 = Gauge32: 10 IF-MIB::ifHighSpeed.7 = Gauge32: 10 IF-MIB::ifHighSpeed.9 = Gauge32: 10 IF-MIB::ifName.13 = STRING: eth2 IF-MIB::ifName.14 = STRING: eth1 IF-MIB::ifName.15 = STRING: eth0 IF-MIB::ifHighSpeed.13 = Gauge32: 1000 IF-MIB::ifHighSpeed.14 = Gauge32: 1000 IF-MIB::ifHighSpeed.15 = Gauge32: 1000 IF-MIB::ifName.20 = STRING: vif2.0 IF-MIB::ifName.21 = STRING: vif2.1 IF-MIB::ifName.22 = STRING: vif2.2 IF-MIB::ifHighSpeed.20 = Gauge32: 1000 IF-MIB::ifHighSpeed.21 = Gauge32: 1000 IF-MIB::ifHighSpeed.22 = Gauge32: 1000 DomU IF-MIB::ifHighSpeed.1 = Gauge32: 10 IF-MIB::ifHighSpeed.2 = Gauge32: 10 IF-MIB::ifHighSpeed.3 = Gauge32: 10 IF-MIB::ifHighSpeed.4 = Gauge32: 10 IF-MIB::ifName.1 = STRING: lo IF-MIB::ifName.2 = STRING: eth0 IF-MIB::ifName.3 = STRING: eth1 IF-MIB::ifName.4 = STRING: eth2 I know that my network speed is no limited at 10Mb/s but the packet rate yes. I''m trying to change the Virtual Interface configuration but I don''t know how to do this. Thanks -- Wark _______________________________________________ Xen-community mailing list Xen-community@lists.xensource.com http://lists.xensource.com/mailman/listinfo/xen-community