Stephen Spector
2008-Feb-25 21:51 UTC
[Xen-community] RE: Xen-community Digest, Vol 2, Issue 8
Mark: I would send this email to xen-users@lists.xensource.com as there are many technical people that watch that mailing list for questions such as this. This mailing list is primarily for community announcements such as event, blogs, etc. Thanks. Stephen Spector ------------------------------ Message: 3 Date: Mon, 25 Feb 2008 16:50:40 -0500 From: "mark mclarnon" <mark.mclarnon@gmail.com> Subject: [Xen-community] Xen not recognizing second SATA Hard Disk or CDROM To: xen-community@lists.xensource.com Message-ID: <253738580802251350m4d4fa4dbycd60ab17ae042f5@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" I have encountered a strange situation with Xen 3.1.0 that I cannot seem to resolve. I wonder if anyone in the community has experienced anything similar. Assume for the moment that I have the proper CPU to be running Xen in the first place. My situation is this: Operating System: Debian Etch (Linux debian 2.6.18-6-686-bigmem) Motherboard ASUS P5K 8 GB RAM (hence bigmem kernel) 2 SATA Hard Drive 750 GB 2 SATA DVD Burner Now I am aware of the problems with this particular board (P5K) and SATA devices. Although there was no particular reason to choose SATA DVD drives (a decision I now regret), I believe the use of 2 SATA HD was ok. Incidentally, the only way I could get Debian onto the system was using a USB key method. NOTE: I am running the latest BIOS as downloaded from ASUS support today 0225/08. Sorry I forget the rev number but its dated from Jan 08. All 4 devices are connected to the 4 main mother board SATA channels (read ICH9 connectors) and nothing is connected to the JMicron channel in the back of the board. In addition to this, JMicron controller has been disabled in the BIOS. The order of devices is: 1. SATA HD (/dev/sda) 2. SATA CDROM 3. SATA CDROM 4. SATA HD (/dev/sdb) I follow the instructions to build Xen from source: # apt-get ..... (long list omitted here) # make world # make install # update-rc.d xend defaults 20 21 # update-rc.d xendomains defaults 21 20 I did not use any custom configuration or build options. Its at this point that things get hairy. I see many google/Xen links that you must build an initrd but the recommended way of doing so differs quite a bit. Some links claim you should use mkinitrd, some claim yaird. Others claim mkinitramfs and still others claim update-initramfs. Initially I believe I used mkinitramfs as follows: # depmod 2.6.18-xen # mkinitramfs -o /boot/initrd.img-2.6.18-xen 2.6.18-xen The next step was to run: # update-grub This automatically adds the following stanza to /etc/grub/menu.lst: title Xen 3.1.0 / Debian GNU/Linux, kernel 2.6.18-xen root (hd0,0) kernel /boot/xen-3.1.0.gz module /boot/vmlinuz-2.6.18-xen root=/dev/sda1 ro console=tty0 module /boot/initrd.img-2.6.18-xen savedefault Coincidentally, my existing stanza was: title Debian GNU/Linux, kernel 2.6.18-6-686-bigmem root (hd0,0) kernel /boot/vmlinuz-2.6.18-6-686-bigmem root=/dev/sda1 ro initrd /boot/initrd.img-2.6.18-6-686-bigmem savedefault Note the root=/dev/sda1 in each case. At this point, I reboot and attempt to start the machine with a Xen kernel. Depending on how I have the P5K BIOS setting "SATA Configuration" (detailed in the P5K user manual section 4.3.5) the machine either fails to boot (when set with the SATA Enhanced setting) or boots successfully (with the SATA IDE setting) but never sees the second SATA HD or second DVD writer. In short, the devices connected to the 3rd and 4th ICH9 SATA connectors don''t get recognized. NOTE: When SATA Configuration is set to IDE, the only way Xen will boot is if I change the root=/dev/sda1 to read root=/dev/hda1. Whats even more interesting (to me at least) is that when booting with the Xen kernel, the boot device that used to be known as /dev/sda is recognized by the kernel as /dev/hda. Yet files such as /etc/fstab still reference /dev/sda1! Does the SCSI subsystem provide a mapping of some type from /dev/sda to /dev/hda? Is it a softlink in the /dev directory? In desperation, I have tried grub options such as all-generic-ide and irqpoll to get the second drives recognized but the system never seems to boot properly listing errors with "lost interrupt hda" and the like. The second HD and DVD writer seem to show up as /dev/sde and /dev/sdg (if I recall correctly). My questions are: 1. Is attempting to use a second HD and DVD writer a lost cause? 2. Why does the Xen kernel skip the recognition of the second HD and DVD writer? 3. Why if the boot log reports my boot device was recognized as /dev/hda does my system still boot and reference /dev/sda? 4. Why must /etc/grub/menu.lst be changed but not /etc/fstab? 5. Could this entire problem be attributed to the lack of judgment when procuring a Xen compatible motherboard? Has anyone seen this situation before? Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xensource.com/archives/html/xen-community/attachments/20080 225/5f8a1300/attachment.html ------------------------------ _______________________________________________ Xen-community mailing list Xen-community@lists.xensource.com http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-community End of Xen-community Digest, Vol 2, Issue 8 ******************************************* _______________________________________________ Xen-community mailing list Xen-community@lists.xensource.com http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-community