On Sun, Sep 24, 2023 at 1:05?AM Cindy Lu <lulu at redhat.com>
wrote:>
> Hi All
> Really apologize for the delay, this is the draft RFC for
> iommufd support for vdpa, This code provides the basic function
> for iommufd support
>
> The code was tested and passed in device vdpa_sim_net
> The qemu code is
> https://gitlab.com/lulu6/gitlabqemutmp/-/tree/iommufdRFC
> The kernel code is
> https://gitlab.com/lulu6/vhost/-/tree/iommufdRFC
>
> ToDo
> 1. this code is out of date and needs to clean and rebase on the latest
code
> 2. this code has some workaround, I Skip the check for
> iommu_group and CACHE_COHERENCY, also some misc issues like need to add
> mutex for iommfd operations
> 3. only test in emulated device, other modes not tested yet
>
> After addressed these problems I will send out a new version for RFC. I
will
> provide the code in 3 weeks
Something more needs to be done after a quick glance at the codes.
1) The support for device with platform IOMMU support
2) The support for multiple ASes per device
...
Thanks
>
> Thanks
> Cindy
> Signed-off-by: Cindy Lu <lulu at redhat.com>
> The test step is
> 1. create vdpa_sim device
> ...
> vdpa dev add name vdpa15 mgmtdev vdpasim_net
> ...
> 2. load the VM with the command
> -object iommufd,id=iommufd0 \
> -device
virtio-net-pci,netdev=vhost-vdpa1,disable-legacy=on,disable-modern=off\
> -netdev
type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-0,id=vhost-vdpa1,iommufd=iommufd0\
>
> 3. in guest VM you can find the vdpa_sim port works well.
> [root at ubuntunew ~]# ifconfig eth0
> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet6 fe80::5054:ff:fe12:3456 prefixlen 64 scopeid
0x20<link>
> ether 52:54:00:12:34:56 txqueuelen 1000 (Ethernet)
> RX packets 53 bytes 9108 (8.8 KiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 53 bytes 9108 (8.8 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> [root at ubuntunew ~]# ./test.sh eth0
> [ 172.815279] pktgen: Packet Generator for packet performance testing.
Version: 2.75
> Adding queue 0 of eth0
> Configuring devices eth0 at 0
> Running... ctrl^C to stop
>
> [root at ubuntunew ~]# ifconfig eth0
> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet6 fe80::5054:ff:fe12:3456 prefixlen 64 scopeid
0x20<link>
> ether 52:54:00:12:34:56 txqueuelen 1000 (Ethernet)
> RX packets 183455 bytes 11748533 (11.2 MiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 183473 bytes 11749685 (11.2 MiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> Cindy Lu (7):
> vhost/iommufd: Add the functions support iommufd
> Kconfig: Add the new file vhost/iommufd
> vhost: Add 3 new uapi to support iommufd
> vdpa: change the map/unmap process to support iommufd
> vdpa: Add new vdpa_config_ops
> vdpa_sim :Add support for iommufd
> iommufd: Skip the CACHE_COHERENCY and iommu group check
>
> drivers/iommu/iommufd/device.c | 6 +-
> drivers/vdpa/vdpa_sim/vdpa_sim.c | 8 ++
> drivers/vhost/Kconfig | 1 +
> drivers/vhost/Makefile | 1 +
> drivers/vhost/iommufd.c | 151 +++++++++++++++++++++++
> drivers/vhost/vdpa.c | 201 +++++++++++++++++++++++++++++++
> drivers/vhost/vhost.h | 21 ++++
> include/linux/vdpa.h | 34 +++++-
> include/uapi/linux/vhost.h | 71 +++++++++++
> 9 files changed, 490 insertions(+), 4 deletions(-)
> create mode 100644 drivers/vhost/iommufd.c
>
> --
> 2.34.3
>