Add a driver for the ACPI VIOT table, which provides topology
information for para-virtual IOMMUs. Enable virtio-iommu on
non-devicetree platforms, including x86.
Since v4 [1]:
* Fixes (comments, wrong argument, unused variable)
* Removed patch 5 that wrongly moved set_dma_ops(dev, NULL) into dma-iommu.
The simplification of limit parameters for x86 callers is now in patch 4.
* Release ACPI table after parsing
* Added review and tested tags, thanks for all the feedback!
You can find a QEMU implementation at [2], with extra support for
testing all VIOT nodes including MMIO-based endpoints and IOMMU.
This series is at [3].
[1] https://lore.kernel.org/linux-iommu/20210610075130.67517-1-jean-philippe at
linaro.org/
[2] https://jpbrucker.net/git/qemu/log/?h=virtio-iommu/acpi
[3] https://jpbrucker.net/git/linux/log/?h=virtio-iommu/acpi
Jean-Philippe Brucker (5):
ACPI: arm64: Move DMA setup operations out of IORT
ACPI: Move IOMMU setup code out of IORT
ACPI: Add driver for the VIOT table
iommu/dma: Pass address limit rather than size to
iommu_setup_dma_ops()
iommu/virtio: Enable x86 support
drivers/acpi/Kconfig | 3 +
drivers/iommu/Kconfig | 4 +-
drivers/acpi/Makefile | 2 +
drivers/acpi/arm64/Makefile | 1 +
include/acpi/acpi_bus.h | 3 +
include/linux/acpi.h | 3 +
include/linux/acpi_iort.h | 14 +-
include/linux/acpi_viot.h | 19 ++
include/linux/dma-iommu.h | 4 +-
arch/arm64/mm/dma-mapping.c | 2 +-
drivers/acpi/arm64/dma.c | 50 +++++
drivers/acpi/arm64/iort.c | 128 ++----------
drivers/acpi/bus.c | 2 +
drivers/acpi/scan.c | 78 +++++++-
drivers/acpi/viot.c | 366 +++++++++++++++++++++++++++++++++++
drivers/iommu/amd/iommu.c | 2 +-
drivers/iommu/dma-iommu.c | 13 +-
drivers/iommu/intel/iommu.c | 5 +-
drivers/iommu/virtio-iommu.c | 11 ++
MAINTAINERS | 8 +
20 files changed, 581 insertions(+), 137 deletions(-)
create mode 100644 include/linux/acpi_viot.h
create mode 100644 drivers/acpi/arm64/dma.c
create mode 100644 drivers/acpi/viot.c
--
2.32.0
Jean-Philippe Brucker
2021-Jun-18 15:20 UTC
[PATCH v5 1/5] ACPI: arm64: Move DMA setup operations out of IORT
Extract generic DMA setup code out of IORT, so it can be reused by VIOT.
Keep it in drivers/acpi/arm64 for now, since it could break x86
platforms that haven't run this code so far, if they have invalid
tables.
Reviewed-by: Eric Auger <eric.auger at redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
---
drivers/acpi/arm64/Makefile | 1 +
include/linux/acpi.h | 3 +++
include/linux/acpi_iort.h | 6 ++---
drivers/acpi/arm64/dma.c | 50 ++++++++++++++++++++++++++++++++++
drivers/acpi/arm64/iort.c | 54 ++++++-------------------------------
drivers/acpi/scan.c | 2 +-
6 files changed, 66 insertions(+), 50 deletions(-)
create mode 100644 drivers/acpi/arm64/dma.c
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
index 6ff50f4ed947..66acbe77f46e 100644
--- a/drivers/acpi/arm64/Makefile
+++ b/drivers/acpi/arm64/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_ACPI_IORT) += iort.o
obj-$(CONFIG_ACPI_GTDT) += gtdt.o
+obj-y += dma.o
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c60745f657e9..7aaa9559cc19 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -259,9 +259,12 @@ void acpi_numa_x2apic_affinity_init(struct
acpi_srat_x2apic_cpu_affinity *pa);
#ifdef CONFIG_ARM64
void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
+void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
#else
static inline void
acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
+static inline void
+acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
#endif
int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 1a12baa58e40..f7f054833afd 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -34,7 +34,7 @@ struct irq_domain *iort_get_device_domain(struct device *dev,
u32 id,
void acpi_configure_pmsi_domain(struct device *dev);
int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id);
/* IOMMU interface */
-void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *size);
+int iort_dma_get_ranges(struct device *dev, u64 *size);
const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
const u32 *id_in);
int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head
*head);
@@ -48,8 +48,8 @@ static inline struct irq_domain *iort_get_device_domain(
{ return NULL; }
static inline void acpi_configure_pmsi_domain(struct device *dev) { }
/* IOMMU interface */
-static inline void iort_dma_setup(struct device *dev, u64 *dma_addr,
- u64 *size) { }
+static inline int iort_dma_get_ranges(struct device *dev, u64 *size)
+{ return -ENODEV; }
static inline const struct iommu_ops *iort_iommu_configure_id(
struct device *dev, const u32 *id_in)
{ return NULL; }
diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
new file mode 100644
index 000000000000..f16739ad3cc0
--- /dev/null
+++ b/drivers/acpi/arm64/dma.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
+#include <linux/device.h>
+#include <linux/dma-direct.h>
+
+void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
+{
+ int ret;
+ u64 end, mask;
+ u64 dmaaddr = 0, size = 0, offset = 0;
+
+ /*
+ * If @dev is expected to be DMA-capable then the bus code that created
+ * it should have initialised its dma_mask pointer by this point. For
+ * now, we'll continue the legacy behaviour of coercing it to the
+ * coherent mask if not, but we'll no longer do so quietly.
+ */
+ if (!dev->dma_mask) {
+ dev_warn(dev, "DMA mask not set\n");
+ dev->dma_mask = &dev->coherent_dma_mask;
+ }
+
+ if (dev->coherent_dma_mask)
+ size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
+ else
+ size = 1ULL << 32;
+
+ ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
+ if (ret == -ENODEV)
+ ret = iort_dma_get_ranges(dev, &size);
+ if (!ret) {
+ /*
+ * Limit coherent and dma mask based on size retrieved from
+ * firmware.
+ */
+ end = dmaaddr + size - 1;
+ mask = DMA_BIT_MASK(ilog2(end) + 1);
+ dev->bus_dma_limit = end;
+ dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
+ *dev->dma_mask = min(*dev->dma_mask, mask);
+ }
+
+ *dma_addr = dmaaddr;
+ *dma_size = size;
+
+ ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
+
+ dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? "
failed!" : "");
+}
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 3912a1f6058e..a940be1cf2af 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1144,56 +1144,18 @@ static int rc_dma_get_range(struct device *dev, u64
*size)
}
/**
- * iort_dma_setup() - Set-up device DMA parameters.
+ * iort_dma_get_ranges() - Look up DMA addressing limit for the device
+ * @dev: device to lookup
+ * @size: DMA range size result pointer
*
- * @dev: device to configure
- * @dma_addr: device DMA address result pointer
- * @dma_size: DMA range size result pointer
+ * Return: 0 on success, an error otherwise.
*/
-void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
+int iort_dma_get_ranges(struct device *dev, u64 *size)
{
- u64 end, mask, dmaaddr = 0, size = 0, offset = 0;
- int ret;
-
- /*
- * If @dev is expected to be DMA-capable then the bus code that created
- * it should have initialised its dma_mask pointer by this point. For
- * now, we'll continue the legacy behaviour of coercing it to the
- * coherent mask if not, but we'll no longer do so quietly.
- */
- if (!dev->dma_mask) {
- dev_warn(dev, "DMA mask not set\n");
- dev->dma_mask = &dev->coherent_dma_mask;
- }
-
- if (dev->coherent_dma_mask)
- size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
+ if (dev_is_pci(dev))
+ return rc_dma_get_range(dev, size);
else
- size = 1ULL << 32;
-
- ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
- if (ret == -ENODEV)
- ret = dev_is_pci(dev) ? rc_dma_get_range(dev, &size)
- : nc_dma_get_range(dev, &size);
-
- if (!ret) {
- /*
- * Limit coherent and dma mask based on size retrieved from
- * firmware.
- */
- end = dmaaddr + size - 1;
- mask = DMA_BIT_MASK(ilog2(end) + 1);
- dev->bus_dma_limit = end;
- dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
- *dev->dma_mask = min(*dev->dma_mask, mask);
- }
-
- *dma_addr = dmaaddr;
- *dma_size = size;
-
- ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
-
- dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? "
failed!" : "");
+ return nc_dma_get_range(dev, size);
}
static void __init acpi_iort_register_irq(int hwirq, const char *name,
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index e10d38ac7cf2..ea613df8f913 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1537,7 +1537,7 @@ int acpi_dma_configure_id(struct device *dev, enum
dev_dma_attr attr,
return 0;
}
- iort_dma_setup(dev, &dma_addr, &size);
+ acpi_arch_dma_setup(dev, &dma_addr, &size);
iommu = iort_iommu_configure_id(dev, input_id);
if (PTR_ERR(iommu) == -EPROBE_DEFER)
--
2.32.0
Jean-Philippe Brucker
2021-Jun-18 15:20 UTC
[PATCH v5 2/5] ACPI: Move IOMMU setup code out of IORT
Extract the code that sets up the IOMMU infrastructure from IORT, since
it can be reused by VIOT. Move it one level up into a new
acpi_iommu_configure_id() function, which calls the IORT parsing
function which in turn calls the acpi_iommu_fwspec_init() helper.
Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
---
include/acpi/acpi_bus.h | 3 ++
include/linux/acpi_iort.h | 8 ++---
drivers/acpi/arm64/iort.c | 74 +++++----------------------------------
drivers/acpi/scan.c | 73 +++++++++++++++++++++++++++++++++++++-
4 files changed, 86 insertions(+), 72 deletions(-)
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 3a82faac5767..41f092a269f6 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -588,6 +588,9 @@ struct acpi_pci_root {
bool acpi_dma_supported(struct acpi_device *adev);
enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
+int acpi_iommu_fwspec_init(struct device *dev, u32 id,
+ struct fwnode_handle *fwnode,
+ const struct iommu_ops *ops);
int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
u64 *size);
int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index f7f054833afd..f1f0842a2cb2 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -35,8 +35,7 @@ void acpi_configure_pmsi_domain(struct device *dev);
int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id);
/* IOMMU interface */
int iort_dma_get_ranges(struct device *dev, u64 *size);
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
- const u32 *id_in);
+int iort_iommu_configure_id(struct device *dev, const u32 *id_in);
int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head
*head);
phys_addr_t acpi_iort_dma_get_max_cpu_address(void);
#else
@@ -50,9 +49,8 @@ static inline void acpi_configure_pmsi_domain(struct device
*dev) { }
/* IOMMU interface */
static inline int iort_dma_get_ranges(struct device *dev, u64 *size)
{ return -ENODEV; }
-static inline const struct iommu_ops *iort_iommu_configure_id(
- struct device *dev, const u32 *id_in)
-{ return NULL; }
+static inline int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
+{ return -ENODEV; }
static inline
int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
{ return 0; }
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index a940be1cf2af..487d1095030d 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -806,23 +806,6 @@ static struct acpi_iort_node
*iort_get_msi_resv_iommu(struct device *dev)
return NULL;
}
-static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev)
-{
- struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
- return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
-}
-
-static inline int iort_add_device_replay(struct device *dev)
-{
- int err = 0;
-
- if (dev->bus && !device_iommu_mapped(dev))
- err = iommu_probe_device(dev);
-
- return err;
-}
-
/**
* iort_iommu_msi_get_resv_regions - Reserved region driver helper
* @dev: Device from iommu_get_resv_regions()
@@ -900,18 +883,6 @@ static inline bool iort_iommu_driver_enabled(u8 type)
}
}
-static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
- struct fwnode_handle *fwnode,
- const struct iommu_ops *ops)
-{
- int ret = iommu_fwspec_init(dev, fwnode, ops);
-
- if (!ret)
- ret = iommu_fwspec_add_ids(dev, &streamid, 1);
-
- return ret;
-}
-
static bool iort_pci_rc_supports_ats(struct acpi_iort_node *node)
{
struct acpi_iort_root_complex *pci_rc;
@@ -946,7 +917,7 @@ static int iort_iommu_xlate(struct device *dev, struct
acpi_iort_node *node,
return iort_iommu_driver_enabled(node->type) ?
-EPROBE_DEFER : -ENODEV;
- return arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
+ return acpi_iommu_fwspec_init(dev, streamid, iort_fwnode, ops);
}
struct iort_pci_alias_info {
@@ -1020,24 +991,13 @@ static int iort_nc_iommu_map_id(struct device *dev,
* @dev: device to configure
* @id_in: optional input id const value pointer
*
- * Returns: iommu_ops pointer on configuration success
- * NULL on configuration failure
+ * Returns: 0 on success, <0 on failure
*/
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
- const u32 *id_in)
+int iort_iommu_configure_id(struct device *dev, const u32 *id_in)
{
struct acpi_iort_node *node;
- const struct iommu_ops *ops;
int err = -ENODEV;
- /*
- * If we already translated the fwspec there
- * is nothing left to do, return the iommu_ops.
- */
- ops = iort_fwspec_iommu_ops(dev);
- if (ops)
- return ops;
-
if (dev_is_pci(dev)) {
struct iommu_fwspec *fwspec;
struct pci_bus *bus = to_pci_dev(dev)->bus;
@@ -1046,7 +1006,7 @@ const struct iommu_ops *iort_iommu_configure_id(struct
device *dev,
node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &bus->dev);
if (!node)
- return NULL;
+ return -ENODEV;
info.node = node;
err = pci_for_each_dma_alias(to_pci_dev(dev),
@@ -1059,7 +1019,7 @@ const struct iommu_ops *iort_iommu_configure_id(struct
device *dev,
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
if (!node)
- return NULL;
+ return -ENODEV;
err = id_in ? iort_nc_iommu_map_id(dev, node, id_in) :
iort_nc_iommu_map(dev, node);
@@ -1068,32 +1028,14 @@ const struct iommu_ops *iort_iommu_configure_id(struct
device *dev,
iort_named_component_init(dev, node);
}
- /*
- * If we have reason to believe the IOMMU driver missed the initial
- * add_device callback for dev, replay it to get things in order.
- */
- if (!err) {
- ops = iort_fwspec_iommu_ops(dev);
- err = iort_add_device_replay(dev);
- }
-
- /* Ignore all other errors apart from EPROBE_DEFER */
- if (err == -EPROBE_DEFER) {
- ops = ERR_PTR(err);
- } else if (err) {
- dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
- ops = NULL;
- }
-
- return ops;
+ return err;
}
#else
int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head)
{ return 0; }
-const struct iommu_ops *iort_iommu_configure_id(struct device *dev,
- const u32 *input_id)
-{ return NULL; }
+int iort_iommu_configure_id(struct device *dev, const u32 *input_id)
+{ return -ENODEV; }
#endif
static int nc_dma_get_range(struct device *dev, u64 *size)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index ea613df8f913..2a2e690040e9 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/acpi_iort.h>
+#include <linux/iommu.h>
#include <linux/signal.h>
#include <linux/kthread.h>
#include <linux/dmi.h>
@@ -1520,6 +1521,76 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
u64 *offset,
return ret >= 0 ? 0 : ret;
}
+#ifdef CONFIG_IOMMU_API
+int acpi_iommu_fwspec_init(struct device *dev, u32 id,
+ struct fwnode_handle *fwnode,
+ const struct iommu_ops *ops)
+{
+ int ret = iommu_fwspec_init(dev, fwnode, ops);
+
+ if (!ret)
+ ret = iommu_fwspec_add_ids(dev, &id, 1);
+
+ return ret;
+}
+
+static inline const struct iommu_ops *acpi_iommu_fwspec_ops(struct device *dev)
+{
+ struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+
+ return fwspec ? fwspec->ops : NULL;
+}
+
+static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev,
+ const u32 *id_in)
+{
+ int err;
+ const struct iommu_ops *ops;
+
+ /*
+ * If we already translated the fwspec there is nothing left to do,
+ * return the iommu_ops.
+ */
+ ops = acpi_iommu_fwspec_ops(dev);
+ if (ops)
+ return ops;
+
+ err = iort_iommu_configure_id(dev, id_in);
+
+ /*
+ * If we have reason to believe the IOMMU driver missed the initial
+ * iommu_probe_device() call for dev, replay it to get things in order.
+ */
+ if (!err && dev->bus && !device_iommu_mapped(dev))
+ err = iommu_probe_device(dev);
+
+ /* Ignore all other errors apart from EPROBE_DEFER */
+ if (err == -EPROBE_DEFER) {
+ return ERR_PTR(err);
+ } else if (err) {
+ dev_dbg(dev, "Adding to IOMMU failed: %d\n", err);
+ return NULL;
+ }
+ return acpi_iommu_fwspec_ops(dev);
+}
+
+#else /* !CONFIG_IOMMU_API */
+
+int acpi_iommu_fwspec_init(struct device *dev, u32 id,
+ struct fwnode_handle *fwnode,
+ const struct iommu_ops *ops)
+{
+ return -ENODEV;
+}
+
+static const struct iommu_ops *acpi_iommu_configure_id(struct device *dev,
+ const u32 *id_in)
+{
+ return NULL;
+}
+
+#endif /* !CONFIG_IOMMU_API */
+
/**
* acpi_dma_configure_id - Set-up DMA configuration for the device.
* @dev: The pointer to the device
@@ -1539,7 +1610,7 @@ int acpi_dma_configure_id(struct device *dev, enum
dev_dma_attr attr,
acpi_arch_dma_setup(dev, &dma_addr, &size);
- iommu = iort_iommu_configure_id(dev, input_id);
+ iommu = acpi_iommu_configure_id(dev, input_id);
if (PTR_ERR(iommu) == -EPROBE_DEFER)
return -EPROBE_DEFER;
--
2.32.0
Jean-Philippe Brucker
2021-Jun-18 15:20 UTC
[PATCH v5 3/5] ACPI: Add driver for the VIOT table
The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger at redhat.com>
Reviewed-by: Eric Auger <eric.auger at redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
---
drivers/acpi/Kconfig | 3 +
drivers/iommu/Kconfig | 1 +
drivers/acpi/Makefile | 2 +
include/linux/acpi_viot.h | 19 ++
drivers/acpi/bus.c | 2 +
drivers/acpi/scan.c | 3 +
drivers/acpi/viot.c | 366 ++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 8 +
8 files changed, 404 insertions(+)
create mode 100644 include/linux/acpi_viot.h
create mode 100644 drivers/acpi/viot.c
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index eedec61e3476..3758c6940ed7 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -526,6 +526,9 @@ endif
source "drivers/acpi/pmic/Kconfig"
+config ACPI_VIOT
+ bool
+
endif # ACPI
config X86_PM_TIMER
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 1f111b399bca..aff8a4830dd1 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -403,6 +403,7 @@ config VIRTIO_IOMMU
depends on ARM64
select IOMMU_API
select INTERVAL_TREE
+ select ACPI_VIOT if ACPI
help
Para-virtualised IOMMU driver with virtio.
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 700b41adf2db..a6e644c48987 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -118,3 +118,5 @@ video-objs += acpi_video.o video_detect.o
obj-y += dptf/
obj-$(CONFIG_ARM64) += arm64/
+
+obj-$(CONFIG_ACPI_VIOT) += viot.o
diff --git a/include/linux/acpi_viot.h b/include/linux/acpi_viot.h
new file mode 100644
index 000000000000..1eb8ee5b0e5f
--- /dev/null
+++ b/include/linux/acpi_viot.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ACPI_VIOT_H__
+#define __ACPI_VIOT_H__
+
+#include <linux/acpi.h>
+
+#ifdef CONFIG_ACPI_VIOT
+void __init acpi_viot_init(void);
+int viot_iommu_configure(struct device *dev);
+#else
+static inline void acpi_viot_init(void) {}
+static inline int viot_iommu_configure(struct device *dev)
+{
+ return -ENODEV;
+}
+#endif
+
+#endif /* __ACPI_VIOT_H__ */
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index a4bd673934c0..d6f4e2f06fdb 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -27,6 +27,7 @@
#include <linux/dmi.h>
#endif
#include <linux/acpi_iort.h>
+#include <linux/acpi_viot.h>
#include <linux/pci.h>
#include <acpi/apei.h>
#include <linux/suspend.h>
@@ -1334,6 +1335,7 @@ static int __init acpi_init(void)
acpi_wakeup_device_init();
acpi_debugger_init();
acpi_setup_sb_notify_handler();
+ acpi_viot_init();
return 0;
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 2a2e690040e9..3e2bb04ab528 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/acpi_iort.h>
+#include <linux/acpi_viot.h>
#include <linux/iommu.h>
#include <linux/signal.h>
#include <linux/kthread.h>
@@ -1556,6 +1557,8 @@ static const struct iommu_ops
*acpi_iommu_configure_id(struct device *dev,
return ops;
err = iort_iommu_configure_id(dev, id_in);
+ if (err && err != -EPROBE_DEFER)
+ err = viot_iommu_configure(dev);
/*
* If we have reason to believe the IOMMU driver missed the initial
diff --git a/drivers/acpi/viot.c b/drivers/acpi/viot.c
new file mode 100644
index 000000000000..d2256326c73a
--- /dev/null
+++ b/drivers/acpi/viot.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Virtual I/O topology
+ *
+ * The Virtual I/O Translation Table (VIOT) describes the topology of
+ * para-virtual IOMMUs and the endpoints they manage. The OS uses it to
+ * initialize devices in the right order, preventing endpoints from issuing DMA
+ * before their IOMMU is ready.
+ *
+ * When binding a driver to a device, before calling the device driver's
probe()
+ * method, the driver infrastructure calls dma_configure(). At that point the
+ * VIOT driver looks for an IOMMU associated to the device in the VIOT table.
+ * If an IOMMU exists and has been initialized, the VIOT driver initializes the
+ * device's IOMMU fwspec, allowing the DMA infrastructure to invoke the
IOMMU
+ * ops when the device driver configures DMA mappings. If an IOMMU exists and
+ * hasn't yet been initialized, VIOT returns -EPROBE_DEFER to postpone
probing
+ * the device until the IOMMU is available.
+ */
+#define pr_fmt(fmt) "ACPI: VIOT: " fmt
+
+#include <linux/acpi_viot.h>
+#include <linux/dma-iommu.h>
+#include <linux/fwnode.h>
+#include <linux/iommu.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+struct viot_iommu {
+ /* Node offset within the table */
+ unsigned int offset;
+ struct fwnode_handle *fwnode;
+ struct list_head list;
+};
+
+struct viot_endpoint {
+ union {
+ /* PCI range */
+ struct {
+ u16 segment_start;
+ u16 segment_end;
+ u16 bdf_start;
+ u16 bdf_end;
+ };
+ /* MMIO */
+ u64 address;
+ };
+ u32 endpoint_id;
+ struct viot_iommu *viommu;
+ struct list_head list;
+};
+
+static struct acpi_table_viot *viot;
+static LIST_HEAD(viot_iommus);
+static LIST_HEAD(viot_pci_ranges);
+static LIST_HEAD(viot_mmio_endpoints);
+
+static int __init viot_check_bounds(const struct acpi_viot_header *hdr)
+{
+ struct acpi_viot_header *start, *end, *hdr_end;
+
+ start = ACPI_ADD_PTR(struct acpi_viot_header, viot,
+ max_t(size_t, sizeof(*viot), viot->node_offset));
+ end = ACPI_ADD_PTR(struct acpi_viot_header, viot, viot->header.length);
+ hdr_end = ACPI_ADD_PTR(struct acpi_viot_header, hdr, sizeof(*hdr));
+
+ if (hdr < start || hdr_end > end) {
+ pr_err(FW_BUG "Node pointer overflows\n");
+ return -EOVERFLOW;
+ }
+ if (hdr->length < sizeof(*hdr)) {
+ pr_err(FW_BUG "Empty node\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __init viot_get_pci_iommu_fwnode(struct viot_iommu *viommu,
+ u16 segment, u16 bdf)
+{
+ struct pci_dev *pdev;
+ struct fwnode_handle *fwnode;
+
+ pdev = pci_get_domain_bus_and_slot(segment, PCI_BUS_NUM(bdf),
+ bdf & 0xff);
+ if (!pdev) {
+ pr_err("Could not find PCI IOMMU\n");
+ return -ENODEV;
+ }
+
+ fwnode = pdev->dev.fwnode;
+ if (!fwnode) {
+ /*
+ * PCI devices aren't necessarily described by ACPI. Create a
+ * fwnode so the IOMMU subsystem can identify this device.
+ */
+ fwnode = acpi_alloc_fwnode_static();
+ if (!fwnode) {
+ pci_dev_put(pdev);
+ return -ENOMEM;
+ }
+ set_primary_fwnode(&pdev->dev, fwnode);
+ }
+ viommu->fwnode = pdev->dev.fwnode;
+ pci_dev_put(pdev);
+ return 0;
+}
+
+static int __init viot_get_mmio_iommu_fwnode(struct viot_iommu *viommu,
+ u64 address)
+{
+ struct acpi_device *adev;
+ struct resource res = {
+ .start = address,
+ .end = address,
+ .flags = IORESOURCE_MEM,
+ };
+
+ adev = acpi_resource_consumer(&res);
+ if (!adev) {
+ pr_err("Could not find MMIO IOMMU\n");
+ return -EINVAL;
+ }
+ viommu->fwnode = &adev->fwnode;
+ return 0;
+}
+
+static struct viot_iommu * __init viot_get_iommu(unsigned int offset)
+{
+ int ret;
+ struct viot_iommu *viommu;
+ struct acpi_viot_header *hdr = ACPI_ADD_PTR(struct acpi_viot_header,
+ viot, offset);
+ union {
+ struct acpi_viot_virtio_iommu_pci pci;
+ struct acpi_viot_virtio_iommu_mmio mmio;
+ } *node = (void *)hdr;
+
+ list_for_each_entry(viommu, &viot_iommus, list)
+ if (viommu->offset == offset)
+ return viommu;
+
+ if (viot_check_bounds(hdr))
+ return NULL;
+
+ viommu = kzalloc(sizeof(*viommu), GFP_KERNEL);
+ if (!viommu)
+ return NULL;
+
+ viommu->offset = offset;
+ switch (hdr->type) {
+ case ACPI_VIOT_NODE_VIRTIO_IOMMU_PCI:
+ if (hdr->length < sizeof(node->pci))
+ goto err_free;
+
+ ret = viot_get_pci_iommu_fwnode(viommu, node->pci.segment,
+ node->pci.bdf);
+ break;
+ case ACPI_VIOT_NODE_VIRTIO_IOMMU_MMIO:
+ if (hdr->length < sizeof(node->mmio))
+ goto err_free;
+
+ ret = viot_get_mmio_iommu_fwnode(viommu,
+ node->mmio.base_address);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ if (ret)
+ goto err_free;
+
+ list_add(&viommu->list, &viot_iommus);
+ return viommu;
+
+err_free:
+ kfree(viommu);
+ return NULL;
+}
+
+static int __init viot_parse_node(const struct acpi_viot_header *hdr)
+{
+ int ret = -EINVAL;
+ struct list_head *list;
+ struct viot_endpoint *ep;
+ union {
+ struct acpi_viot_mmio mmio;
+ struct acpi_viot_pci_range pci;
+ } *node = (void *)hdr;
+
+ if (viot_check_bounds(hdr))
+ return -EINVAL;
+
+ if (hdr->type == ACPI_VIOT_NODE_VIRTIO_IOMMU_PCI ||
+ hdr->type == ACPI_VIOT_NODE_VIRTIO_IOMMU_MMIO)
+ return 0;
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ switch (hdr->type) {
+ case ACPI_VIOT_NODE_PCI_RANGE:
+ if (hdr->length < sizeof(node->pci)) {
+ pr_err(FW_BUG "Invalid PCI node size\n");
+ goto err_free;
+ }
+
+ ep->segment_start = node->pci.segment_start;
+ ep->segment_end = node->pci.segment_end;
+ ep->bdf_start = node->pci.bdf_start;
+ ep->bdf_end = node->pci.bdf_end;
+ ep->endpoint_id = node->pci.endpoint_start;
+ ep->viommu = viot_get_iommu(node->pci.output_node);
+ list = &viot_pci_ranges;
+ break;
+ case ACPI_VIOT_NODE_MMIO:
+ if (hdr->length < sizeof(node->mmio)) {
+ pr_err(FW_BUG "Invalid MMIO node size\n");
+ goto err_free;
+ }
+
+ ep->address = node->mmio.base_address;
+ ep->endpoint_id = node->mmio.endpoint;
+ ep->viommu = viot_get_iommu(node->mmio.output_node);
+ list = &viot_mmio_endpoints;
+ break;
+ default:
+ pr_warn("Unsupported node %x\n", hdr->type);
+ ret = 0;
+ goto err_free;
+ }
+
+ if (!ep->viommu) {
+ pr_warn("No IOMMU node found\n");
+ /*
+ * A future version of the table may use the node for other
+ * purposes. Keep parsing.
+ */
+ ret = 0;
+ goto err_free;
+ }
+
+ list_add(&ep->list, list);
+ return 0;
+
+err_free:
+ kfree(ep);
+ return ret;
+}
+
+/**
+ * acpi_viot_init - Parse the VIOT table
+ *
+ * Parse the VIOT table, prepare the list of endpoints to be used during DMA
+ * setup of devices.
+ */
+void __init acpi_viot_init(void)
+{
+ int i;
+ acpi_status status;
+ struct acpi_table_header *hdr;
+ struct acpi_viot_header *node;
+
+ status = acpi_get_table(ACPI_SIG_VIOT, 0, &hdr);
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND) {
+ const char *msg = acpi_format_exception(status);
+
+ pr_err("Failed to get table, %s\n", msg);
+ }
+ return;
+ }
+
+ viot = (void *)hdr;
+
+ node = ACPI_ADD_PTR(struct acpi_viot_header, viot, viot->node_offset);
+ for (i = 0; i < viot->node_count; i++) {
+ if (viot_parse_node(node))
+ return;
+
+ node = ACPI_ADD_PTR(struct acpi_viot_header, node,
+ node->length);
+ }
+
+ acpi_put_table(hdr);
+}
+
+static int viot_dev_iommu_init(struct device *dev, struct viot_iommu *viommu,
+ u32 epid)
+{
+ const struct iommu_ops *ops;
+
+ if (!viommu)
+ return -ENODEV;
+
+ /* We're not translating ourself */
+ if (viommu->fwnode == dev->fwnode)
+ return -EINVAL;
+
+ ops = iommu_ops_from_fwnode(viommu->fwnode);
+ if (!ops)
+ return IS_ENABLED(CONFIG_VIRTIO_IOMMU) ?
+ -EPROBE_DEFER : -ENODEV;
+
+ return acpi_iommu_fwspec_init(dev, epid, viommu->fwnode, ops);
+}
+
+static int viot_pci_dev_iommu_init(struct pci_dev *pdev, u16 dev_id, void
*data)
+{
+ u32 epid;
+ struct viot_endpoint *ep;
+ u32 domain_nr = pci_domain_nr(pdev->bus);
+
+ list_for_each_entry(ep, &viot_pci_ranges, list) {
+ if (domain_nr >= ep->segment_start &&
+ domain_nr <= ep->segment_end &&
+ dev_id >= ep->bdf_start &&
+ dev_id <= ep->bdf_end) {
+ epid = ((domain_nr - ep->segment_start) << 16) +
+ dev_id - ep->bdf_start + ep->endpoint_id;
+
+ /*
+ * If we found a PCI range managed by the viommu, we're
+ * the one that has to request ACS.
+ */
+ pci_request_acs();
+
+ return viot_dev_iommu_init(&pdev->dev, ep->viommu,
+ epid);
+ }
+ }
+ return -ENODEV;
+}
+
+static int viot_mmio_dev_iommu_init(struct platform_device *pdev)
+{
+ struct resource *mem;
+ struct viot_endpoint *ep;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+
+ list_for_each_entry(ep, &viot_mmio_endpoints, list) {
+ if (ep->address == mem->start)
+ return viot_dev_iommu_init(&pdev->dev, ep->viommu,
+ ep->endpoint_id);
+ }
+ return -ENODEV;
+}
+
+/**
+ * viot_iommu_configure - Setup IOMMU ops for an endpoint described by VIOT
+ * @dev: the endpoint
+ *
+ * Return: 0 on success, <0 on failure
+ */
+int viot_iommu_configure(struct device *dev)
+{
+ if (dev_is_pci(dev))
+ return pci_for_each_dma_alias(to_pci_dev(dev),
+ viot_pci_dev_iommu_init, NULL);
+ else if (dev_is_platform(dev))
+ return viot_mmio_dev_iommu_init(to_platform_device(dev));
+ return -ENODEV;
+}
diff --git a/MAINTAINERS b/MAINTAINERS
index bc0ceef87b73..11f68a07772d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -431,6 +431,14 @@ W: https://01.org/linux-acpi
B: https://bugzilla.kernel.org
F: drivers/acpi/acpi_video.c
+ACPI VIOT DRIVER
+M: Jean-Philippe Brucker <jean-philippe at linaro.org>
+L: linux-acpi at vger.kernel.org
+L: iommu at lists.linux-foundation.org
+S: Maintained
+F: drivers/acpi/viot.c
+F: include/linux/acpi_viot.h
+
ACPI WMI DRIVER
L: platform-driver-x86 at vger.kernel.org
S: Orphan
--
2.32.0
Jean-Philippe Brucker
2021-Jun-18 15:20 UTC
[PATCH v5 4/5] iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
Passing a 64-bit address width to iommu_setup_dma_ops() is valid on
virtual platforms, but isn't currently possible. The overflow check in
iommu_dma_init_domain() prevents this even when @dma_base isn't 0. Pass
a limit address instead of a size, so callers don't have to fake a size
to work around the check.
The base and limit parameters are being phased out, because:
* they are redundant for x86 callers. dma-iommu already reserves the
first page, and the upper limit is already in domain->geometry.
* they can now be obtained from dev->dma_range_map on Arm.
But removing them on Arm isn't completely straightforward so is left for
future work. As an intermediate step, simplify the x86 callers by
passing dummy limits.
Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
---
include/linux/dma-iommu.h | 4 ++--
arch/arm64/mm/dma-mapping.c | 2 +-
drivers/iommu/amd/iommu.c | 2 +-
drivers/iommu/dma-iommu.c | 12 ++++++------
drivers/iommu/intel/iommu.c | 5 +----
5 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/include/linux/dma-iommu.h b/include/linux/dma-iommu.h
index 6e75a2d689b4..758ca4694257 100644
--- a/include/linux/dma-iommu.h
+++ b/include/linux/dma-iommu.h
@@ -19,7 +19,7 @@ int iommu_get_msi_cookie(struct iommu_domain *domain,
dma_addr_t base);
void iommu_put_dma_cookie(struct iommu_domain *domain);
/* Setup call for arch DMA mapping code */
-void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size);
+void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit);
/* The DMA API isn't _quite_ the whole story, though... */
/*
@@ -50,7 +50,7 @@ struct msi_msg;
struct device;
static inline void iommu_setup_dma_ops(struct device *dev, u64 dma_base,
- u64 size)
+ u64 dma_limit)
{
}
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 4bf1dd3eb041..6719f9efea09 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -50,7 +50,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64
size,
dev->dma_coherent = coherent;
if (iommu)
- iommu_setup_dma_ops(dev, dma_base, size);
+ iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
#ifdef CONFIG_XEN
if (xen_swiotlb_detect())
diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c
index 3ac42bbdefc6..216323fb27ef 100644
--- a/drivers/iommu/amd/iommu.c
+++ b/drivers/iommu/amd/iommu.c
@@ -1713,7 +1713,7 @@ static void amd_iommu_probe_finalize(struct device *dev)
/* Domains are initialized for this device - have a look what we ended up with
*/
domain = iommu_get_domain_for_dev(dev);
if (domain->type == IOMMU_DOMAIN_DMA)
- iommu_setup_dma_ops(dev, IOVA_START_PFN << PAGE_SHIFT, 0);
+ iommu_setup_dma_ops(dev, 0, U64_MAX);
else
set_dma_ops(dev, NULL);
}
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 7bcdd1205535..c62e19bed302 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -319,16 +319,16 @@ static bool dev_is_untrusted(struct device *dev)
* iommu_dma_init_domain - Initialise a DMA mapping domain
* @domain: IOMMU domain previously prepared by iommu_get_dma_cookie()
* @base: IOVA at which the mappable address space starts
- * @size: Size of IOVA space
+ * @limit: Last address of the IOVA space
* @dev: Device the domain is being initialised for
*
- * @base and @size should be exact multiples of IOMMU page granularity to
+ * @base and @limit + 1 should be exact multiples of IOMMU page granularity to
* avoid rounding surprises. If necessary, we reserve the page at address 0
* to ensure it is an invalid IOVA. It is safe to reinitialise a domain, but
* any change which could make prior IOVAs invalid will fail.
*/
static int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base,
- u64 size, struct device *dev)
+ dma_addr_t limit, struct device *dev)
{
struct iommu_dma_cookie *cookie = domain->iova_cookie;
unsigned long order, base_pfn;
@@ -346,7 +346,7 @@ static int iommu_dma_init_domain(struct iommu_domain
*domain, dma_addr_t base,
/* Check the domain allows at least some access to the device... */
if (domain->geometry.force_aperture) {
if (base > domain->geometry.aperture_end ||
- base + size <= domain->geometry.aperture_start) {
+ limit < domain->geometry.aperture_start) {
pr_warn("specified DMA range outside IOMMU capability\n");
return -EFAULT;
}
@@ -1308,7 +1308,7 @@ static const struct dma_map_ops iommu_dma_ops = {
* The IOMMU core code allocates the default DMA domain, which the underlying
* IOMMU driver needs to support via the dma-iommu layer.
*/
-void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size)
+void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit)
{
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
@@ -1320,7 +1320,7 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base,
u64 size)
* underlying IOMMU driver needs to support via the dma-iommu layer.
*/
if (domain->type == IOMMU_DOMAIN_DMA) {
- if (iommu_dma_init_domain(domain, dma_base, size, dev))
+ if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
goto out_err;
dev->dma_ops = &iommu_dma_ops;
}
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index be35284a2016..2f7213f0e7a1 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5165,13 +5165,10 @@ static void intel_iommu_release_device(struct device
*dev)
static void intel_iommu_probe_finalize(struct device *dev)
{
- dma_addr_t base = IOVA_START_PFN << VTD_PAGE_SHIFT;
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
- struct dmar_domain *dmar_domain = to_dmar_domain(domain);
if (domain && domain->type == IOMMU_DOMAIN_DMA)
- iommu_setup_dma_ops(dev, base,
- __DOMAIN_MAX_ADDR(dmar_domain->gaw) - base);
+ iommu_setup_dma_ops(dev, 0, U64_MAX);
else
set_dma_ops(dev, NULL);
}
--
2.32.0
Jean-Philippe Brucker
2021-Jun-18 15:21 UTC
[PATCH v5 5/5] iommu/virtio: Enable x86 support
With the VIOT support in place, x86 platforms can now use the
virtio-iommu.
Because the other x86 IOMMU drivers aren't yet ready to use the
acpi_dma_setup() path, x86 doesn't implement arch_setup_dma_ops() at the
moment. Similarly to Vt-d and AMD IOMMU, clear the DMA ops and call
iommu_setup_dma_ops() from probe_finalize().
Acked-by: Joerg Roedel <jroedel at suse.de>
Acked-by: Michael S. Tsirkin <mst at redhat.com>
Tested-by: Eric Auger <eric.auger at redhat.com>
Reviewed-by: Eric Auger <eric.auger at redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
---
drivers/iommu/Kconfig | 3 ++-
drivers/iommu/dma-iommu.c | 1 +
drivers/iommu/virtio-iommu.c | 11 +++++++++++
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index aff8a4830dd1..07b7c25cbed8 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -400,8 +400,9 @@ config HYPERV_IOMMU
config VIRTIO_IOMMU
tristate "Virtio IOMMU driver"
depends on VIRTIO
- depends on ARM64
+ depends on (ARM64 || X86)
select IOMMU_API
+ select IOMMU_DMA
select INTERVAL_TREE
select ACPI_VIOT if ACPI
help
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index c62e19bed302..9dbbc95c8189 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -1330,6 +1330,7 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base,
u64 dma_limit)
pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA
ops\n",
dev_name(dev));
}
+EXPORT_SYMBOL_GPL(iommu_setup_dma_ops);
static struct iommu_dma_msi_page *iommu_dma_get_msi_page(struct device *dev,
phys_addr_t msi_addr, struct iommu_domain *domain)
diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index c6e5ee4d9cef..fe581f0c9b3a 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -10,6 +10,7 @@
#include <linux/amba/bus.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
+#include <linux/dma-map-ops.h>
#include <linux/freezer.h>
#include <linux/interval_tree.h>
#include <linux/iommu.h>
@@ -904,6 +905,15 @@ static struct iommu_device *viommu_probe_device(struct
device *dev)
return ERR_PTR(ret);
}
+static void viommu_probe_finalize(struct device *dev)
+{
+#ifndef CONFIG_ARCH_HAS_SETUP_DMA_OPS
+ /* First clear the DMA ops in case we're switching from a DMA domain */
+ set_dma_ops(dev, NULL);
+ iommu_setup_dma_ops(dev, 0, U64_MAX);
+#endif
+}
+
static void viommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
@@ -940,6 +950,7 @@ static struct iommu_ops viommu_ops = {
.iova_to_phys = viommu_iova_to_phys,
.iotlb_sync = viommu_iotlb_sync,
.probe_device = viommu_probe_device,
+ .probe_finalize = viommu_probe_finalize,
.release_device = viommu_release_device,
.device_group = viommu_device_group,
.get_resv_regions = viommu_get_resv_regions,
--
2.32.0
On Fri, Jun 18, 2021 at 05:20:55PM +0200, Jean-Philippe Brucker wrote:> Jean-Philippe Brucker (5): > ACPI: arm64: Move DMA setup operations out of IORT > ACPI: Move IOMMU setup code out of IORT > ACPI: Add driver for the VIOT table > iommu/dma: Pass address limit rather than size to > iommu_setup_dma_ops() > iommu/virtio: Enable x86 supportApplied all for v5.14, thanks Jean-Philippe for driving this effort and the patience to do it right!