Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 0/9] drm: Support simple-framebuffer devices and firmware fbs
This patchset adds support for simple-framebuffer platform devices and a handover mechanism for native drivers to take-over control of the hardware. The new driver, called simpledrm, binds to a simple-frambuffer platform device. The kernel's boot code creates such devices for firmware-provided framebuffers, such as EFI-GOP or VESA. Typically the BIOS, UEFI or boot loader sets up the framebuffers. Description via device tree is also an option. Simpledrm is small enough to be linked into the kernel. The driver's main purpose is to provide graphical output during the early phases of the boot process, before the native DRM drivers are available. Native drivers are typically loaded from an initrd ram disk. Occationally simpledrm can also serve as interim solution on graphics hardware without native DRM driver. So far distributions rely on fbdev drivers, such as efifb, vesafb or simplefb, for early-boot graphical output. However fbdev is deprecated and the drivers do not provide DRM interfaces for modern userspace. Patches 1 and 2 prepare the DRM format helpers for simpledrm. Patches 4 to 8 add the simpledrm driver. It's build on simple DRM helpers and SHMEM. It supports 16-bit, 24-bit and 32-bit RGB framebuffers. During pageflips, SHMEM buffers are copied into the framebuffer memory, similar to cirrus or mgag200. The code in patches 7 and 8 handles clocks and regulators. It's based on the simplefb drivers, but has been modified for DRM. Patches 3 and 9 add a hand-over mechanism. Simpledrm acquires it's framebuffer's I/O-memory range and provides a callback function to be removed by a native driver. The native driver will remove simpledrm before taking over the hardware. The removal is integrated into existing helpers, so drivers use it automatically. I've also been working on fastboot support (i.e., flicker-free booting). This requires state-readout from simpledrm via generic interfaces, as outlined in [1]. I do have some prototype code, but it will take a while to get this ready. Simpledrm will then support it. I've tested simpledrm with x86 EFI and VESA framebuffers, which both work reliably. The fbdev console and Weston work automatically. Xorg requires manual configuration of the device. Xorgs current modesetting driver does not work with both, platform and PCI device, for the same physical hardware. Once configured, X11 works. I looked into X11, but couldn't see an easy way of fixing the problem. With the push towards Wayland+Xwayland I expect the problem to become a non-issue soon. Additional testing has been reported at [2]. One cosmetical issue is that simpledrm's device file is card0 and the native driver's device file is card1. After simpledrm has been kicked out, only card1 is left. This does not seem to be a practical problem however. TODO/IDEAS: * provide deferred takeover * provide bootsplash DRM client * make simplekms usable with ARM-EFI fbs v3: * clear screen to black when disabled (Daniel) * rebase onto existing aperture helpers * detach via hot-unplug via platform_device_unregister() v2: * rename to simpledrm, aperture helpers * reorganized patches * use hotplug helpers for removal (Daniel) * added DT match tables (Rob) * use shadow-plane helpers * lots of minor cleanups [1] https://lore.kernel.org/dri-devel/CAKMK7uHtqHy_oz4W7F+hmp9iqp7W5Ra8CxPvJ=9BwmvfU-O0gg at mail.gmail.com/ [2] https://lore.kernel.org/dri-devel/1761762.3HQLrFs1K7 at nerdopolis/ Thomas Zimmermann (9): drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip() drm/format-helper: Add blitter functions drm/aperture: Add infrastructure for aperture ownership drm: Add simpledrm driver drm/simpledrm: Add fbdev emulation drm/simpledrm: Initialize framebuffer data from device-tree node drm/simpledrm: Acquire clocks from DT device node drm/simpledrm: Acquire regulators from DT device node drm/simpledrm: Acquire memory aperture for framebuffer MAINTAINERS | 7 + drivers/gpu/drm/drm_aperture.c | 216 +++++- drivers/gpu/drm/drm_format_helper.c | 96 ++- drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +- drivers/gpu/drm/tiny/Kconfig | 16 + drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/cirrus.c | 2 +- drivers/gpu/drm/tiny/simpledrm.c | 920 +++++++++++++++++++++++++ include/drm/drm_aperture.h | 36 +- include/drm/drm_format_helper.h | 10 +- 10 files changed, 1279 insertions(+), 27 deletions(-) create mode 100644 drivers/gpu/drm/tiny/simpledrm.c -- 2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 1/9] drm/format-helper: Pass destination pitch to drm_fb_memcpy_dstclip()
The memcpy's destination buffer might have a different pitch than the
source. Support different pitches as function argument.
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/drm_format_helper.c | 9 +++++----
drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +-
drivers/gpu/drm/tiny/cirrus.c | 2 +-
include/drm/drm_format_helper.h | 2 +-
4 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/drm_format_helper.c
b/drivers/gpu/drm/drm_format_helper.c
index c043ca364c86..8d5a683afea7 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -52,6 +52,7 @@ EXPORT_SYMBOL(drm_fb_memcpy);
/**
* drm_fb_memcpy_dstclip - Copy clip buffer
* @dst: Destination buffer (iomem)
+ * @dst_pitch: Number of bytes between two consecutive scanlines within dst
* @vaddr: Source buffer
* @fb: DRM framebuffer
* @clip: Clip rectangle area to copy
@@ -59,12 +60,12 @@ EXPORT_SYMBOL(drm_fb_memcpy);
* This function applies clipping on dst, i.e. the destination is a
* full (iomem) framebuffer but only the clip rect content is copied over.
*/
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
- struct drm_framebuffer *fb,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch,
+ void *vaddr, struct drm_framebuffer *fb,
struct drm_rect *clip)
{
unsigned int cpp = fb->format->cpp[0];
- unsigned int offset = clip_offset(clip, fb->pitches[0], cpp);
+ unsigned int offset = clip_offset(clip, dst_pitch, cpp);
size_t len = (clip->x2 - clip->x1) * cpp;
unsigned int y, lines = clip->y2 - clip->y1;
@@ -73,7 +74,7 @@ void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
for (y = 0; y < lines; y++) {
memcpy_toio(dst, vaddr, len);
vaddr += fb->pitches[0];
- dst += fb->pitches[0];
+ dst += dst_pitch;
}
}
EXPORT_SYMBOL(drm_fb_memcpy_dstclip);
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c
b/drivers/gpu/drm/mgag200/mgag200_mode.c
index cece3e57fb27..9d576240faed 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1554,7 +1554,7 @@ mgag200_handle_damage(struct mga_device *mdev, struct
drm_framebuffer *fb,
{
void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
- drm_fb_memcpy_dstclip(mdev->vram, vmap, fb, clip);
+ drm_fb_memcpy_dstclip(mdev->vram, fb->pitches[0], vmap, fb, clip);
/* Always scanout image at VRAM offset 0 */
mgag200_set_startadd(mdev, (u32)0);
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index e3afb45d9a5c..42611dacde88 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -324,7 +324,7 @@ static int cirrus_fb_blit_rect(struct drm_framebuffer *fb,
const struct dma_buf_
return -ENODEV;
if (cirrus->cpp == fb->format->cpp[0])
- drm_fb_memcpy_dstclip(cirrus->vram,
+ drm_fb_memcpy_dstclip(cirrus->vram, fb->pitches[0],
vmap, fb, rect);
else if (fb->format->cpp[0] == 4 && cirrus->cpp == 2)
diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index 5f9e37032468..2b5036a5fbe7 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -11,7 +11,7 @@ struct drm_rect;
void drm_fb_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb,
struct drm_rect *clip);
-void drm_fb_memcpy_dstclip(void __iomem *dst, void *vaddr,
+void drm_fb_memcpy_dstclip(void __iomem *dst, unsigned int dst_pitch, void
*vaddr,
struct drm_framebuffer *fb,
struct drm_rect *clip);
void drm_fb_swab(void *dst, void *src, struct drm_framebuffer *fb,
--
2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 2/9] drm/format-helper: Add blitter functions
The blitter functions copy a framebuffer to I/O memory using one of
the existing conversion functions.
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/drm_format_helper.c | 87 +++++++++++++++++++++++++++++
include/drm/drm_format_helper.h | 8 +++
2 files changed, 95 insertions(+)
diff --git a/drivers/gpu/drm/drm_format_helper.c
b/drivers/gpu/drm/drm_format_helper.c
index 8d5a683afea7..0e885cd34107 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -344,3 +344,90 @@ void drm_fb_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct
drm_framebuffer *fb,
}
EXPORT_SYMBOL(drm_fb_xrgb8888_to_gray8);
+/**
+ * drm_fb_blit_rect_dstclip - Copy parts of a framebuffer to display memory
+ * @dst: The display memory to copy to
+ * @dst_pitch: Number of bytes between two consecutive scanlines within dst
+ * @dst_format: FOURCC code of the display's color format
+ * @vmap: The framebuffer memory to copy from
+ * @fb: The framebuffer to copy from
+ * @clip: Clip rectangle area to copy
+ *
+ * This function copies parts of a framebuffer to display memory. If the
+ * formats of the display and the framebuffer mismatch, the blit function
+ * will attempt to convert between them.
+ *
+ * Use drm_fb_blit_dstclip() to copy the full framebuffer.
+ *
+ * Returns:
+ * 0 on success, or
+ * -EINVAL if the color-format conversion failed, or
+ * a negative error code otherwise.
+ */
+int drm_fb_blit_rect_dstclip(void __iomem *dst, unsigned int dst_pitch,
+ uint32_t dst_format, void *vmap,
+ struct drm_framebuffer *fb,
+ struct drm_rect *clip)
+{
+ uint32_t fb_format = fb->format->format;
+
+ /* treat alpha channel like filler bits */
+ if (fb_format == DRM_FORMAT_ARGB8888)
+ fb_format = DRM_FORMAT_XRGB8888;
+ if (dst_format == DRM_FORMAT_ARGB8888)
+ dst_format = DRM_FORMAT_XRGB8888;
+
+ if (dst_format == fb_format) {
+ drm_fb_memcpy_dstclip(dst, dst_pitch, vmap, fb, clip);
+ return 0;
+
+ } else if (dst_format == DRM_FORMAT_RGB565) {
+ if (fb_format == DRM_FORMAT_XRGB8888) {
+ drm_fb_xrgb8888_to_rgb565_dstclip(dst, dst_pitch,
+ vmap, fb, clip,
+ false);
+ return 0;
+ }
+ } else if (dst_format == DRM_FORMAT_RGB888) {
+ if (fb_format == DRM_FORMAT_XRGB8888) {
+ drm_fb_xrgb8888_to_rgb888_dstclip(dst, dst_pitch,
+ vmap, fb, clip);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(drm_fb_blit_rect_dstclip);
+
+/**
+ * drm_fb_blit_dstclip - Copy framebuffer to display memory
+ * @dst: The display memory to copy to
+ * @dst_pitch: Number of bytes between two consecutive scanlines within dst
+ * @dst_format: FOURCC code of the display's color format
+ * @vmap: The framebuffer memory to copy from
+ * @fb: The framebuffer to copy from
+ *
+ * This function copies a full framebuffer to display memory. If the formats
+ * of the display and the framebuffer mismatch, the copy function will
+ * attempt to convert between them.
+ *
+ * See drm_fb_blit_rect_dstclip() for more inforamtion.
+ *
+ * Returns:
+ * 0 on success, or a negative error code otherwise.
+ */
+int drm_fb_blit_dstclip(void __iomem *dst, unsigned int dst_pitch,
+ uint32_t dst_format, void *vmap,
+ struct drm_framebuffer *fb)
+{
+ struct drm_rect fullscreen = {
+ .x1 = 0,
+ .x2 = fb->width,
+ .y1 = 0,
+ .y2 = fb->height,
+ };
+ return drm_fb_blit_rect_dstclip(dst, dst_pitch, dst_format, vmap, fb,
+ &fullscreen);
+}
+EXPORT_SYMBOL(drm_fb_blit_dstclip);
diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index 2b5036a5fbe7..4e0258a61311 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -28,4 +28,12 @@ void drm_fb_xrgb8888_to_rgb888_dstclip(void __iomem *dst,
unsigned int dst_pitch
void drm_fb_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
struct drm_rect *clip);
+int drm_fb_blit_rect_dstclip(void __iomem *dst, unsigned int dst_pitch,
+ uint32_t dst_format, void *vmap,
+ struct drm_framebuffer *fb,
+ struct drm_rect *rect);
+int drm_fb_blit_dstclip(void __iomem *dst, unsigned int dst_pitch,
+ uint32_t dst_format, void *vmap,
+ struct drm_framebuffer *fb);
+
#endif /* __LINUX_DRM_FORMAT_HELPER_H */
--
2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 3/9] drm/aperture: Add infrastructure for aperture ownership
Platform devices might operate on firmware framebuffers, such as VESA or
EFI. Before a native driver for the graphics hardware can take over the
device, it has to remove any platform driver that operates on the firmware
framebuffer. Aperture helpers provide the infrastructure for platform
drivers to acquire firmware framebuffers, and for native drivers to remove
them later on.
It works similar to the related fbdev mechanism. During initialization, the
platform driver acquires the firmware framebuffer's I/O memory and provides
a callback to be removed. The native driver later uses this information to
remove any platform driver for it's framebuffer I/O memory.
The aperture removal code is integrated into the existing code for removing
conflicting framebuffers, so native drivers use it automatically.
v3:
* rebase onto existing aperture infrastructure
* release aperture from list during detach; fix dangling apertures
* don't export struct drm_aperture
* document struct drm_aperture_funcs
v2:
* rename plaform helpers to aperture helpers
* tie to device lifetime with devm_ functions
* removed unsued remove() callback
* rename kickout to detach
* make struct drm_aperture private
* rebase onto existing drm_aperture.h header file
* use MIT license only for simplicity
* documentation
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Acked-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/drm_aperture.c | 216 ++++++++++++++++++++++++++++++++-
include/drm/drm_aperture.h | 36 +++---
2 files changed, 232 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/drm_aperture.c b/drivers/gpu/drm/drm_aperture.c
index e034dd7f9b09..aeddf125d2b4 100644
--- a/drivers/gpu/drm/drm_aperture.c
+++ b/drivers/gpu/drm/drm_aperture.c
@@ -1,9 +1,17 @@
// SPDX-License-Identifier: MIT
+#include <linux/device.h>
#include <linux/fb.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/types.h>
#include <linux/vgaarb.h>
#include <drm/drm_aperture.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_print.h>
/**
* DOC: overview
@@ -62,8 +70,196 @@
* framebuffer apertures automatically. Device drivers without knowledge of
* the framebuffer's location shall call
drm_aperture_remove_framebuffers(),
* which removes all drivers for known framebuffer.
+ *
+ * Drivers that are susceptible to being removed by other drivers, such as
+ * generic EFI or VESA drivers, have to register themselves as owners of their
+ * given framebuffer memory. Ownership of the framebuffer memory is achived
+ * by calling devm_aperture_acquire(). On success, the driver is the owner
+ * of the framebuffer range. The function fails if the framebuffer is already
+ * by another driver. See below for an example.
+ *
+ * .. code-block:: c
+ *
+ * static struct drm_aperture_funcs ap_funcs = {
+ * .detach = ...
+ * };
+ *
+ * static int acquire_framebuffers(struct drm_device *dev, struct pci_dev
*pdev)
+ * {
+ * resource_size_t start, len;
+ * struct drm_aperture *ap;
+ *
+ * base = pci_resource_start(pdev, 0);
+ * size = pci_resource_len(pdev, 0);
+ *
+ * ap = devm_acquire_aperture(dev, base, size, &ap_funcs);
+ * if (IS_ERR(ap))
+ * return PTR_ERR(ap);
+ *
+ * return 0;
+ * }
+ *
+ * static int probe(struct pci_dev *pdev)
+ * {
+ * struct drm_device *dev;
+ * int ret;
+ *
+ * // ... Initialize the device...
+ * dev = devm_drm_dev_alloc();
+ * ...
+ *
+ * // ... and acquire ownership of the framebuffer.
+ * ret = acquire_framebuffers(dev, pdev);
+ * if (ret)
+ * return ret;
+ *
+ * drm_dev_register();
+ *
+ * return 0;
+ * }
+ *
+ * The generic driver is now subject to forced removal by other drivers. This
+ * is when the detach function in struct &drm_aperture_funcs comes into
play.
+ * When a driver calls drm_fb_helper_remove_conflicting_framebuffers() et al
+ * for the registered framebuffer range, the DRM core calls struct
+ * &drm_aperture_funcs.detach and the generic driver has to onload itself.
It
+ * may not access the device's registers, framebuffer memory, ROM, etc
after
+ * detach returned. If the driver supports hotplugging, detach can be treated
+ * like an unplug event.
+ *
+ * .. code-block:: c
+ *
+ * static void detach_from_device(struct drm_device *dev,
+ * resource_size_t base,
+ * resource_size_t size)
+ * {
+ * // Signal unplug
+ * drm_dev_unplug(dev);
+ *
+ * // Maybe do other clean-up operations
+ * ...
+ * }
+ *
+ * static struct drm_aperture_funcs ap_funcs = {
+ * .detach = detach_from_device,
+ * };
*/
+/*
+ * struct drm_aperture - Represents a DRM framebuffer aperture
+ */
+struct drm_aperture {
+ struct drm_device *dev;
+ resource_size_t base;
+ resource_size_t size;
+
+ const struct drm_aperture_funcs *funcs;
+
+ struct list_head lh;
+};
+
+static LIST_HEAD(drm_apertures);
+static DEFINE_MUTEX(drm_apertures_lock);
+
+static bool overlap(resource_size_t base1, resource_size_t end1,
+ resource_size_t base2, resource_size_t end2)
+{
+ return (base1 < end2) && (end1 > base2);
+}
+
+static void devm_aperture_acquire_release(void *data)
+{
+ struct drm_aperture *ap = data;
+ bool detached = !ap->dev;
+
+ if (detached)
+ return;
+
+ mutex_lock(&drm_apertures_lock);
+ list_del(&ap->lh);
+ mutex_unlock(&drm_apertures_lock);
+}
+
+/**
+ * devm_aperture_acquire - Acquires ownership of a framebuffer on behalf of a
DRM driver.
+ * @dev: the DRM device to own the framebuffer memory
+ * @base: the framebuffer's byte offset in physical memory
+ * @size: the framebuffer size in bytes
+ * @funcs: callback functions
+ *
+ * Installs the given device as the new owner. The function fails if the
+ * framebuffer range, or parts of it, is currently owned by another driver.
+ * To evict current owners, callers should use
+ * drm_aperture_remove_conflicting_framebuffers() et al. before calling this
+ * function. Acquired apertures are released automatically if the underlying
+ * device goes away.
+ *
+ * Returns:
+ * An instance of struct &drm_aperture on success, or a pointer-encoded
+ * errno value otherwise.
+ */
+int devm_aperture_acquire(struct drm_device *dev, resource_size_t base,
resource_size_t size,
+ const struct drm_aperture_funcs *funcs)
+{
+ size_t end = base + size;
+ struct list_head *pos;
+ struct drm_aperture *ap;
+
+ mutex_lock(&drm_apertures_lock);
+
+ list_for_each(pos, &drm_apertures) {
+ ap = container_of(pos, struct drm_aperture, lh);
+ if (overlap(base, end, ap->base, ap->base + ap->size))
+ return -EBUSY;
+ }
+
+ ap = devm_kzalloc(dev->dev, sizeof(*ap), GFP_KERNEL);
+ if (!ap)
+ return -ENOMEM;
+
+ ap->dev = dev;
+ ap->base = base;
+ ap->size = size;
+ ap->funcs = funcs;
+ INIT_LIST_HEAD(&ap->lh);
+
+ list_add(&ap->lh, &drm_apertures);
+
+ mutex_unlock(&drm_apertures_lock);
+
+ return devm_add_action_or_reset(dev->dev, devm_aperture_acquire_release,
ap);
+}
+EXPORT_SYMBOL(devm_aperture_acquire);
+
+static void drm_aperture_detach_drivers(resource_size_t base, resource_size_t
size)
+{
+ resource_size_t end = base + size;
+ struct list_head *pos, *n;
+
+ mutex_lock(&drm_apertures_lock);
+
+ list_for_each_safe(pos, n, &drm_apertures) {
+ struct drm_aperture *ap + container_of(pos, struct drm_aperture, lh);
+ struct drm_device *dev = ap->dev;
+
+ if (WARN_ON_ONCE(!dev))
+ continue;
+
+ if (!overlap(base, end, ap->base, ap->base + ap->size))
+ continue;
+
+ ap->dev = NULL; /* detach from device */
+ list_del(&ap->lh);
+
+ if (drm_WARN_ON(dev, !ap->funcs->detach))
+ continue;
+ ap->funcs->detach(dev, ap->base, ap->size);
+ }
+
+ mutex_unlock(&drm_apertures_lock);
+}
+
/**
* drm_aperture_remove_conflicting_framebuffers - remove existing framebuffers
in the given range
* @base: the aperture's base address in physical memory
@@ -94,10 +290,13 @@ int
drm_aperture_remove_conflicting_framebuffers(resource_size_t base, resource_
ret = remove_conflicting_framebuffers(a, name, primary);
kfree(a);
- return ret;
-#else
- return 0;
+ if (ret)
+ return ret;
#endif
+
+ drm_aperture_detach_drivers(base, size);
+
+ return 0;
}
EXPORT_SYMBOL(drm_aperture_remove_conflicting_framebuffers);
@@ -115,7 +314,16 @@
EXPORT_SYMBOL(drm_aperture_remove_conflicting_framebuffers);
*/
int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev,
const char *name)
{
- int ret = 0;
+ resource_size_t base, size;
+ int bar, ret = 0;
+
+ for (bar = 0; bar < PCI_STD_NUM_BARS; ++bar) {
+ if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM))
+ continue;
+ base = pci_resource_start(pdev, bar);
+ size = pci_resource_len(pdev, bar);
+ drm_aperture_detach_drivers(base, size);
+ }
/*
* WARNING: Apparently we must kick fbdev drivers before vgacon,
diff --git a/include/drm/drm_aperture.h b/include/drm/drm_aperture.h
index 23cc01647ed3..19743240fac3 100644
--- a/include/drm/drm_aperture.h
+++ b/include/drm/drm_aperture.h
@@ -5,27 +5,31 @@
#include <linux/types.h>
+struct drm_device;
struct pci_dev;
+/**
+ * drm_aperture_funcs - Callback functions for aperture ownership
+ */
+struct drm_aperture_funcs {
+ /**
+ * @detach:
+ *
+ * Informs the aperture owner to detach itself from the memory range. Called
+ * when another driver requrests ownership. The driver should release itself
+ * from the device and maybe unregister the device itself.
+ *
+ * See drm_dev_unplug().
+ */
+ void (*detach)(struct drm_device *dev, resource_size_t base, resource_size_t
size);
+};
+
+int devm_aperture_acquire(struct drm_device *dev, resource_size_t base,
resource_size_t size,
+ const struct drm_aperture_funcs *funcs);
+
int drm_aperture_remove_conflicting_framebuffers(resource_size_t base,
resource_size_t size,
bool primary, const char *name);
int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev,
const char *name);
-/**
- * drm_aperture_remove_framebuffers - remove all existing framebuffers
- * @primary: also kick vga16fb if present
- * @name: requesting driver name
- *
- * This function removes all graphics device drivers. Use this function on
systems
- * that can have their framebuffer located anywhere in memory.
- *
- * Returns:
- * 0 on success, or a negative errno code otherwise
- */
-static inline int drm_aperture_remove_framebuffers(bool primary, const char
*name)
-{
- return drm_aperture_remove_conflicting_framebuffers(0, (resource_size_t)-1,
primary, name);
-}
-
#endif
--
2.31.1
The simpledrm driver is a DRM driver for simplefb framebuffers as
provided by the kernel's boot code. This driver enables basic
graphical output on many different graphics devices that are provided
by the platform (e.g., EFI, VESA, embedded framebuffers).
With the kernel's simplefb infrastructure, the kernel receives a
pre-configured framebuffer from the system (i.e., firmware, boot
loader). It creates a platform device to which simpledrm attaches.
The system's framebuffer consists of a memory range, size and format.
Based on these values, simpledrm creates a DRM devices. No actual
modesetting is possible.
v3:
* add disable function that clears screen to black (Daniel)
* set shadow buffering only for fbdev emulation
* set platform-driver data during device creation
v2:
* rename driver to simpledrm
* add dri-devel to MAINTAINERS entry
* put native format first in primary-plane format list (Daniel)
* inline simplekms_device_cleanup() (Daniel)
* use helpers for shadow-buffered planes
* fix whitespace errors
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
MAINTAINERS | 7 +
drivers/gpu/drm/tiny/Kconfig | 16 +
drivers/gpu/drm/tiny/Makefile | 1 +
drivers/gpu/drm/tiny/simpledrm.c | 545 +++++++++++++++++++++++++++++++
4 files changed, 569 insertions(+)
create mode 100644 drivers/gpu/drm/tiny/simpledrm.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7c45120759e6..4935776250e4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5765,6 +5765,13 @@ S: Orphan / Obsolete
F: drivers/gpu/drm/savage/
F: include/uapi/drm/savage_drm.h
+DRM DRIVER FOR SIMPLE FRAMEBUFFERS
+M: Thomas Zimmermann <tzimmermann at suse.de>
+L: dri-devel at lists.freedesktop.org
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: drivers/gpu/drm/tiny/simplekms.c
+
DRM DRIVER FOR SIS VIDEO CARDS
S: Orphan / Obsolete
F: drivers/gpu/drm/sis/
diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
index 9bbaa1a69050..d46f95d9196d 100644
--- a/drivers/gpu/drm/tiny/Kconfig
+++ b/drivers/gpu/drm/tiny/Kconfig
@@ -38,6 +38,22 @@ config DRM_GM12U320
This is a KMS driver for projectors which use the GM12U320 chipset
for video transfer over USB2/3, such as the Acer C120 mini projector.
+config DRM_SIMPLEDRM
+ tristate "Simple framebuffer driver"
+ depends on DRM
+ select DRM_GEM_SHMEM_HELPER
+ select DRM_KMS_HELPER
+ help
+ DRM driver for simple platform-provided framebuffers.
+
+ This driver assumes that the display hardware has been initialized
+ by the firmware or bootloader before the kernel boots. Scanout
+ buffer, size, and display format must be provided via device tree,
+ UEFI, VESA, etc.
+
+ On x86 and compatible, you should also select CONFIG_X86_SYSFB to
+ use UEFI and VESA framebuffers.
+
config TINYDRM_HX8357D
tristate "DRM support for HX8357D display panels"
depends on DRM && SPI
diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
index bef6780bdd6f..9cc847e756da 100644
--- a/drivers/gpu/drm/tiny/Makefile
+++ b/drivers/gpu/drm/tiny/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus.o
obj-$(CONFIG_DRM_GM12U320) += gm12u320.o
+obj-$(CONFIG_DRM_SIMPLEDRM) += simpledrm.o
obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o
obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o
obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
new file mode 100644
index 000000000000..0473a90a4024
--- /dev/null
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_format_helper.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_gem_shmem_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#define DRIVER_NAME "simpledrm"
+#define DRIVER_DESC "DRM driver for simple-framebuffer platform
devices"
+#define DRIVER_DATE "20200625"
+#define DRIVER_MAJOR 1
+#define DRIVER_MINOR 0
+
+/*
+ * Assume a monitor resolution of 96 dpi to
+ * get a somewhat reasonable screen size.
+ */
+#define RES_MM(d) \
+ (((d) * 254ul) / (96ul * 10ul))
+
+#define SIMPLEDRM_MODE(hd, vd) \
+ DRM_SIMPLE_MODE(hd, vd, RES_MM(hd), RES_MM(vd))
+
+/*
+ * Helpers for simplefb
+ */
+
+static int
+simplefb_get_validated_int(struct drm_device *dev, const char *name,
+ uint32_t value)
+{
+ if (value > INT_MAX) {
+ drm_err(dev, "simplefb: invalid framebuffer %s of %u\n",
+ name, value);
+ return -EINVAL;
+ }
+ return (int)value;
+}
+
+static int
+simplefb_get_validated_int0(struct drm_device *dev, const char *name,
+ uint32_t value)
+{
+ if (!value) {
+ drm_err(dev, "simplefb: invalid framebuffer %s of %u\n",
+ name, value);
+ return -EINVAL;
+ }
+ return simplefb_get_validated_int(dev, name, value);
+}
+
+static const struct drm_format_info *
+simplefb_get_validated_format(struct drm_device *dev, const char *format_name)
+{
+ static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+ const struct simplefb_format *fmt = formats;
+ const struct simplefb_format *end = fmt + ARRAY_SIZE(formats);
+
+ if (!format_name) {
+ drm_err(dev, "simplefb: missing framebuffer format\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ while (fmt < end) {
+ if (!strcmp(format_name, fmt->name))
+ return drm_format_info(fmt->fourcc);
+ ++fmt;
+ }
+
+ drm_err(dev, "simplefb: unknown framebuffer format %s\n",
+ format_name);
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int
+simplefb_get_width_pd(struct drm_device *dev,
+ const struct simplefb_platform_data *pd)
+{
+ return simplefb_get_validated_int0(dev, "width", pd->width);
+}
+
+static int
+simplefb_get_height_pd(struct drm_device *dev,
+ const struct simplefb_platform_data *pd)
+{
+ return simplefb_get_validated_int0(dev, "height", pd->height);
+}
+
+static int
+simplefb_get_stride_pd(struct drm_device *dev,
+ const struct simplefb_platform_data *pd)
+{
+ return simplefb_get_validated_int(dev, "stride", pd->stride);
+}
+
+static const struct drm_format_info *
+simplefb_get_format_pd(struct drm_device *dev,
+ const struct simplefb_platform_data *pd)
+{
+ return simplefb_get_validated_format(dev, pd->format);
+}
+
+/*
+ * Simple Framebuffer device
+ */
+
+struct simpledrm_device {
+ struct drm_device dev;
+ struct platform_device *pdev;
+
+ /* simplefb settings */
+ struct drm_display_mode mode;
+ const struct drm_format_info *format;
+ unsigned int pitch;
+
+ /* memory management */
+ struct resource *mem;
+ void __iomem *screen_base;
+
+ /* modesetting */
+ uint32_t formats[8];
+ size_t nformats;
+ struct drm_connector connector;
+ struct drm_simple_display_pipe pipe;
+};
+
+static struct simpledrm_device *simpledrm_device_of_dev(struct drm_device *dev)
+{
+ return container_of(dev, struct simpledrm_device, dev);
+}
+
+/*
+ * Simplefb settings
+ */
+
+static struct drm_display_mode simpledrm_mode(unsigned int width,
+ unsigned int height)
+{
+ struct drm_display_mode mode = { SIMPLEDRM_MODE(width, height) };
+
+ mode.clock = 60 /* Hz */ * mode.hdisplay * mode.vdisplay;
+ drm_mode_set_name(&mode);
+
+ return mode;
+}
+
+static int simpledrm_device_init_fb(struct simpledrm_device *sdev)
+{
+ int width, height, stride;
+ const struct drm_format_info *format;
+ struct drm_format_name_buf buf;
+ struct drm_device *dev = &sdev->dev;
+ struct platform_device *pdev = sdev->pdev;
+ const struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev);
+
+ if (pd) {
+ width = simplefb_get_width_pd(dev, pd);
+ if (width < 0)
+ return width;
+ height = simplefb_get_height_pd(dev, pd);
+ if (height < 0)
+ return height;
+ stride = simplefb_get_stride_pd(dev, pd);
+ if (stride < 0)
+ return stride;
+ format = simplefb_get_format_pd(dev, pd);
+ if (IS_ERR(format))
+ return PTR_ERR(format);
+ } else {
+ drm_err(dev, "no simplefb configuration found\n");
+ return -ENODEV;
+ }
+
+ sdev->mode = simpledrm_mode(width, height);
+ sdev->format = format;
+ sdev->pitch = stride;
+
+ drm_dbg_kms(dev, "display mode={" DRM_MODE_FMT "}\n",
+ DRM_MODE_ARG(&sdev->mode));
+ drm_dbg_kms(dev,
+ "framebuffer format=\"%s\", size=%dx%d, stride=%d
byte\n",
+ drm_get_format_name(format->format, &buf), width,
+ height, stride);
+
+ return 0;
+}
+
+/*
+ * Memory management
+ */
+
+static int simpledrm_device_init_mm(struct simpledrm_device *sdev)
+{
+ struct platform_device *pdev = sdev->pdev;
+ struct resource *mem;
+ void __iomem *screen_base;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
+
+ screen_base = devm_ioremap_wc(&pdev->dev, mem->start,
+ resource_size(mem));
+ if (!screen_base)
+ return -ENOMEM;
+
+ sdev->mem = mem;
+ sdev->screen_base = screen_base;
+
+ return 0;
+}
+
+/*
+ * Modesetting
+ */
+
+/*
+ * Support all formats of simplefb and maybe more; in order
+ * of preference. The display's update function will do any
+ * conversion necessary.
+ *
+ * TODO: Add blit helpers for remaining formats and uncomment
+ * constants.
+ */
+static const uint32_t simpledrm_default_formats[] = {
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_RGB565,
+ //DRM_FORMAT_XRGB1555,
+ //DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_RGB888,
+ //DRM_FORMAT_XRGB2101010,
+ //DRM_FORMAT_ARGB2101010,
+};
+
+static const uint64_t simpledrm_format_modifiers[] = {
+ DRM_FORMAT_MOD_LINEAR,
+ DRM_FORMAT_MOD_INVALID
+};
+
+static int simpledrm_connector_helper_get_modes(struct drm_connector
*connector)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(connector->dev);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &sdev->mode);
+ if (!mode)
+ return 0;
+
+ if (mode->name[0] == '\0')
+ drm_mode_set_name(mode);
+
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(connector, mode);
+
+ if (mode->width_mm)
+ connector->display_info.width_mm = mode->width_mm;
+ if (mode->height_mm)
+ connector->display_info.height_mm = mode->height_mm;
+
+ return 1;
+}
+
+static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs
= {
+ .get_modes = simpledrm_connector_helper_get_modes,
+};
+
+static const struct drm_connector_funcs simpledrm_connector_funcs = {
+ .reset = drm_atomic_helper_connector_reset,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = drm_connector_cleanup,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int
+simpledrm_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
+ const struct drm_display_mode *mode)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev);
+
+ if (mode->hdisplay != sdev->mode.hdisplay &&
+ mode->vdisplay != sdev->mode.vdisplay)
+ return MODE_ONE_SIZE;
+ else if (mode->hdisplay != sdev->mode.hdisplay)
+ return MODE_ONE_WIDTH;
+ else if (mode->vdisplay != sdev->mode.vdisplay)
+ return MODE_ONE_HEIGHT;
+
+ return MODE_OK;
+}
+
+static void
+simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
+ struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev);
+ struct drm_shadow_plane_state *shadow_plane_state =
to_drm_shadow_plane_state(plane_state);
+ struct drm_framebuffer *fb = plane_state->fb;
+ void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping
abstraction properly */
+
+ if (!fb)
+ return;
+
+ drm_fb_blit_dstclip(sdev->screen_base, sdev->pitch,
+ sdev->format->format, vmap, fb);
+}
+
+static void
+simpledrm_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev);
+ struct drm_device *dev = &sdev->dev;
+ int idx;
+
+ if (!drm_dev_enter(dev, &idx))
+ return;
+
+ /* Clear screen to black if disabled */
+ memset_io(sdev->screen_base, 0, sdev->pitch * sdev->mode.vdisplay);
+
+ drm_dev_exit(idx);
+}
+
+static void
+simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
+ struct drm_plane_state *old_plane_state)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(pipe->crtc.dev);
+ struct drm_plane_state *plane_state = pipe->plane.state;
+ struct drm_shadow_plane_state *shadow_plane_state =
to_drm_shadow_plane_state(plane_state);
+ void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping
abstraction properly */
+ struct drm_framebuffer *fb = plane_state->fb;
+ struct drm_rect clip;
+
+ if (!fb)
+ return;
+
+ if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip))
+ return;
+
+ drm_fb_blit_rect_dstclip(sdev->screen_base, sdev->pitch,
+ sdev->format->format, vmap, fb, &clip);
+}
+
+static const struct drm_simple_display_pipe_funcs
+simpledrm_simple_display_pipe_funcs = {
+ .mode_valid = simpledrm_simple_display_pipe_mode_valid,
+ .enable = simpledrm_simple_display_pipe_enable,
+ .disable = simpledrm_simple_display_pipe_disable,
+ .update = simpledrm_simple_display_pipe_update,
+ DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS,
+};
+
+static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = {
+ .fb_create = drm_gem_fb_create_with_dirty,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static const uint32_t *simpledrm_device_formats(struct simpledrm_device *sdev,
+ size_t *nformats_out)
+{
+ struct drm_device *dev = &sdev->dev;
+ size_t i;
+
+ if (sdev->nformats)
+ goto out; /* don't rebuild list on recurring calls */
+
+ /* native format goes first */
+ sdev->formats[0] = sdev->format->format;
+ sdev->nformats = 1;
+
+ /* default formats go second */
+ for (i = 0; i < ARRAY_SIZE(simpledrm_default_formats); ++i) {
+ if (simpledrm_default_formats[i] == sdev->format->format)
+ continue; /* native format already went first */
+ sdev->formats[sdev->nformats] = simpledrm_default_formats[i];
+ sdev->nformats++;
+ }
+
+ /*
+ * TODO: The simpledrm driver converts framebuffers to the native
+ * format when copying them to device memory. If there are more
+ * formats listed than supported by the driver, the native format
+ * is not supported by the conversion helpers. Therefore *only*
+ * support the native format and add a conversion helper ASAP.
+ */
+ if (drm_WARN_ONCE(dev, i != sdev->nformats,
+ "format conversion helpers required for %p4cc",
+ &sdev->format->format)) {
+ sdev->nformats = 1;
+ }
+
+out:
+ *nformats_out = sdev->nformats;
+ return sdev->formats;
+}
+
+static int simpledrm_device_init_modeset(struct simpledrm_device *sdev)
+{
+ struct drm_device *dev = &sdev->dev;
+ struct drm_display_mode *mode = &sdev->mode;
+ struct drm_connector *connector = &sdev->connector;
+ struct drm_simple_display_pipe *pipe = &sdev->pipe;
+ const uint32_t *formats;
+ size_t nformats;
+ int ret;
+
+ ret = drmm_mode_config_init(dev);
+ if (ret)
+ return ret;
+
+ dev->mode_config.min_width = mode->hdisplay;
+ dev->mode_config.max_width = mode->hdisplay;
+ dev->mode_config.min_height = mode->vdisplay;
+ dev->mode_config.max_height = mode->vdisplay;
+ dev->mode_config.prefer_shadow_fbdev = true;
+ dev->mode_config.preferred_depth = sdev->format->cpp[0] * 8;
+ dev->mode_config.funcs = &simpledrm_mode_config_funcs;
+
+ ret = drm_connector_init(dev, connector, &simpledrm_connector_funcs,
+ DRM_MODE_CONNECTOR_Unknown);
+ if (ret)
+ return ret;
+ drm_connector_helper_add(connector, &simpledrm_connector_helper_funcs);
+
+ formats = simpledrm_device_formats(sdev, &nformats);
+
+ ret = drm_simple_display_pipe_init(dev, pipe,
&simpledrm_simple_display_pipe_funcs,
+ formats, nformats, simpledrm_format_modifiers,
+ connector);
+ if (ret)
+ return ret;
+
+ drm_mode_config_reset(dev);
+
+ return 0;
+}
+
+/*
+ * Init / Cleanup
+ */
+
+static struct simpledrm_device *
+simpledrm_device_create(struct drm_driver *drv, struct platform_device *pdev)
+{
+ struct simpledrm_device *sdev;
+ int ret;
+
+ sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device,
+ dev);
+ if (IS_ERR(sdev))
+ return ERR_CAST(sdev);
+ sdev->pdev = pdev;
+ platform_set_drvdata(pdev, sdev);
+
+ ret = simpledrm_device_init_fb(sdev);
+ if (ret)
+ return ERR_PTR(ret);
+ ret = simpledrm_device_init_mm(sdev);
+ if (ret)
+ return ERR_PTR(ret);
+ ret = simpledrm_device_init_modeset(sdev);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return sdev;
+}
+
+/*
+ * DRM driver
+ */
+
+DEFINE_DRM_GEM_FOPS(simpledrm_fops);
+
+static struct drm_driver simpledrm_driver = {
+ DRM_GEM_SHMEM_DRIVER_OPS,
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+ .driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET,
+ .fops = &simpledrm_fops,
+};
+
+/*
+ * Platform driver
+ */
+
+static int simpledrm_probe(struct platform_device *pdev)
+{
+ struct simpledrm_device *sdev;
+ struct drm_device *dev;
+ int ret;
+
+ sdev = simpledrm_device_create(&simpledrm_driver, pdev);
+ if (IS_ERR(sdev))
+ return PTR_ERR(sdev);
+ dev = &sdev->dev;
+
+ ret = drm_dev_register(dev, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int simpledrm_remove(struct platform_device *pdev)
+{
+ struct simpledrm_device *sdev = platform_get_drvdata(pdev);
+ struct drm_device *dev = &sdev->dev;
+
+ drm_dev_unregister(dev);
+
+ return 0;
+}
+
+static struct platform_driver simpledrm_platform_driver = {
+ .driver = {
+ .name = "simple-framebuffer", /* connect to sysfb */
+ },
+ .probe = simpledrm_probe,
+ .remove = simpledrm_remove,
+};
+
+module_platform_driver(simpledrm_platform_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
--
2.31.1
This displays a console on simpledrm's framebuffer. The default framebuffer format is being used. Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch> Tested-by: nerdopolis <bluescreen_avenger at verizon.net> --- drivers/gpu/drm/tiny/simpledrm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c index 0473a90a4024..64e8a8581d9a 100644 --- a/drivers/gpu/drm/tiny/simpledrm.c +++ b/drivers/gpu/drm/tiny/simpledrm.c @@ -8,6 +8,7 @@ #include <drm/drm_damage_helper.h> #include <drm/drm_device.h> #include <drm/drm_drv.h> +#include <drm/drm_fb_helper.h> #include <drm/drm_format_helper.h> #include <drm/drm_gem_atomic_helper.h> #include <drm/drm_gem_framebuffer_helper.h> @@ -518,6 +519,8 @@ static int simpledrm_probe(struct platform_device *pdev) if (ret) return ret; + drm_fbdev_generic_setup(dev, 0); + return 0; } -- 2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 6/9] drm/simpledrm: Initialize framebuffer data from device-tree node
A firmware framebuffer might also be specified via device-tree files. If
no device platform data is given, try the DT device node.
v2:
* add Device Tree match table
* clean-up parser wrappers
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/tiny/simpledrm.c | 89 ++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 64e8a8581d9a..53d6bec7d0b2 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -114,6 +114,74 @@ simplefb_get_format_pd(struct drm_device *dev,
return simplefb_get_validated_format(dev, pd->format);
}
+static int
+simplefb_read_u32_of(struct drm_device *dev, struct device_node *of_node,
+ const char *name, u32 *value)
+{
+ int ret = of_property_read_u32(of_node, name, value);
+
+ if (ret)
+ drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n",
+ name, ret);
+ return ret;
+}
+
+static int
+simplefb_read_string_of(struct drm_device *dev, struct device_node *of_node,
+ const char *name, const char **value)
+{
+ int ret = of_property_read_string(of_node, name, value);
+
+ if (ret)
+ drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n",
+ name, ret);
+ return ret;
+}
+
+static int
+simplefb_get_width_of(struct drm_device *dev, struct device_node *of_node)
+{
+ u32 width;
+ int ret = simplefb_read_u32_of(dev, of_node, "width", &width);
+
+ if (ret)
+ return ret;
+ return simplefb_get_validated_int0(dev, "width", width);
+}
+
+static int
+simplefb_get_height_of(struct drm_device *dev, struct device_node *of_node)
+{
+ u32 height;
+ int ret = simplefb_read_u32_of(dev, of_node, "height", &height);
+
+ if (ret)
+ return ret;
+ return simplefb_get_validated_int0(dev, "height", height);
+}
+
+static int
+simplefb_get_stride_of(struct drm_device *dev, struct device_node *of_node)
+{
+ u32 stride;
+ int ret = simplefb_read_u32_of(dev, of_node, "stride", &stride);
+
+ if (ret)
+ return ret;
+ return simplefb_get_validated_int(dev, "stride", stride);
+}
+
+static const struct drm_format_info *
+simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node)
+{
+ const char *format;
+ int ret = simplefb_read_string_of(dev, of_node, "format",
&format);
+
+ if (ret)
+ return ERR_PTR(ret);
+ return simplefb_get_validated_format(dev, format);
+}
+
/*
* Simple Framebuffer device
*/
@@ -166,6 +234,7 @@ static int simpledrm_device_init_fb(struct simpledrm_device
*sdev)
struct drm_device *dev = &sdev->dev;
struct platform_device *pdev = sdev->pdev;
const struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev);
+ struct device_node *of_node = pdev->dev.of_node;
if (pd) {
width = simplefb_get_width_pd(dev, pd);
@@ -180,6 +249,19 @@ static int simpledrm_device_init_fb(struct simpledrm_device
*sdev)
format = simplefb_get_format_pd(dev, pd);
if (IS_ERR(format))
return PTR_ERR(format);
+ } else if (of_node) {
+ width = simplefb_get_width_of(dev, of_node);
+ if (width < 0)
+ return width;
+ height = simplefb_get_height_of(dev, of_node);
+ if (height < 0)
+ return height;
+ stride = simplefb_get_stride_of(dev, of_node);
+ if (stride < 0)
+ return stride;
+ format = simplefb_get_format_of(dev, of_node);
+ if (IS_ERR(format))
+ return PTR_ERR(format);
} else {
drm_err(dev, "no simplefb configuration found\n");
return -ENODEV;
@@ -534,9 +616,16 @@ static int simpledrm_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id simpledrm_of_match_table[] = {
+ { .compatible = "simple-framebuffer", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, simpledrm_of_match_table);
+
static struct platform_driver simpledrm_platform_driver = {
.driver = {
.name = "simple-framebuffer", /* connect to sysfb */
+ .of_match_table = simpledrm_of_match_table,
},
.probe = simpledrm_probe,
.remove = simpledrm_remove,
--
2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 7/9] drm/simpledrm: Acquire clocks from DT device node
Make sure required hardware clocks are enabled while the firmware
framebuffer is in use.
The basic code has been taken from the simplefb driver and adapted
to DRM. Clocks are released automatically via devres helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/tiny/simpledrm.c | 108 +++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 53d6bec7d0b2..996318500abf 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -1,5 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/clk.h>
+#include <linux/of_clk.h>
#include <linux/platform_data/simplefb.h>
#include <linux/platform_device.h>
@@ -190,6 +192,12 @@ struct simpledrm_device {
struct drm_device dev;
struct platform_device *pdev;
+ /* clocks */
+#if defined CONFIG_OF && defined CONFIG_COMMON_CLK
+ unsigned int clk_count;
+ struct clk **clks;
+#endif
+
/* simplefb settings */
struct drm_display_mode mode;
const struct drm_format_info *format;
@@ -211,6 +219,103 @@ static struct simpledrm_device
*simpledrm_device_of_dev(struct drm_device *dev)
return container_of(dev, struct simpledrm_device, dev);
}
+/*
+ * Hardware
+ */
+
+#if defined CONFIG_OF && defined CONFIG_COMMON_CLK
+/*
+ * Clock handling code.
+ *
+ * Here we handle the clocks property of our "simple-framebuffer" dt
node.
+ * This is necessary so that we can make sure that any clocks needed by
+ * the display engine that the bootloader set up for us (and for which it
+ * provided a simplefb dt node), stay up, for the life of the simplefb
+ * driver.
+ *
+ * When the driver unloads, we cleanly disable, and then release the clocks.
+ *
+ * We only complain about errors here, no action is taken as the most likely
+ * error can only happen due to a mismatch between the bootloader which set
+ * up simplefb, and the clock definitions in the device tree. Chances are
+ * that there are no adverse effects, and if there are, a clean teardown of
+ * the fb probe will not help us much either. So just complain and carry on,
+ * and hope that the user actually gets a working fb at the end of things.
+ */
+
+static void simpledrm_device_release_clocks(void *res)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(res);
+ unsigned int i;
+
+ for (i = 0; i < sdev->clk_count; ++i) {
+ if (sdev->clks[i]) {
+ clk_disable_unprepare(sdev->clks[i]);
+ clk_put(sdev->clks[i]);
+ }
+ }
+}
+
+static int simpledrm_device_init_clocks(struct simpledrm_device *sdev)
+{
+ struct drm_device *dev = &sdev->dev;
+ struct platform_device *pdev = sdev->pdev;
+ struct device_node *of_node = pdev->dev.of_node;
+ struct clk *clock;
+ unsigned int i;
+ int ret;
+
+ if (dev_get_platdata(&pdev->dev) || !of_node)
+ return 0;
+
+ sdev->clk_count = of_clk_get_parent_count(of_node);
+ if (!sdev->clk_count)
+ return 0;
+
+ sdev->clks = drmm_kzalloc(dev, sdev->clk_count *
sizeof(sdev->clks[0]),
+ GFP_KERNEL);
+ if (!sdev->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < sdev->clk_count; ++i) {
+ clock = of_clk_get(of_node, i);
+ if (IS_ERR(clock)) {
+ ret = PTR_ERR(clock);
+ if (ret == -EPROBE_DEFER)
+ goto err;
+ drm_err(dev, "clock %u not found: %d\n", i, ret);
+ continue;
+ }
+ ret = clk_prepare_enable(clock);
+ if (ret) {
+ drm_err(dev, "failed to enable clock %u: %d\n",
+ i, ret);
+ clk_put(clock);
+ }
+ sdev->clks[i] = clock;
+ }
+
+ return devm_add_action_or_reset(&pdev->dev,
+ simpledrm_device_release_clocks,
+ sdev);
+
+err:
+ while (i) {
+ --i;
+ if (sdev->clks[i]) {
+ clk_disable_unprepare(sdev->clks[i]);
+ clk_put(sdev->clks[i]);
+ }
+ }
+ return ret;
+}
+#else
+static int simpledrm_device_init_clocks(struct simpledrm_device *sdev)
+{
+ return 0;
+}
+#endif
+
/*
* Simplefb settings
*/
@@ -552,6 +657,9 @@ simpledrm_device_create(struct drm_driver *drv, struct
platform_device *pdev)
sdev->pdev = pdev;
platform_set_drvdata(pdev, sdev);
+ ret = simpledrm_device_init_clocks(sdev);
+ if (ret)
+ return ERR_PTR(ret);
ret = simpledrm_device_init_fb(sdev);
if (ret)
return ERR_PTR(ret);
--
2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 8/9] drm/simpledrm: Acquire regulators from DT device node
Make sure required hardware regulators are enabled while the firmware
framebuffer is in use.
The basic code has been taken from the simplefb driver and adapted
to DRM. Regulators are released automatically via devres helpers.
v2:
* use strscpy()
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/tiny/simpledrm.c | 128 +++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 996318500abf..9d522473cd7c 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -4,6 +4,7 @@
#include <linux/of_clk.h>
#include <linux/platform_data/simplefb.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_connector.h>
@@ -197,6 +198,11 @@ struct simpledrm_device {
unsigned int clk_count;
struct clk **clks;
#endif
+ /* regulators */
+#if defined CONFIG_OF && defined CONFIG_REGULATOR
+ unsigned int regulator_count;
+ struct regulator **regulators;
+#endif
/* simplefb settings */
struct drm_display_mode mode;
@@ -316,6 +322,125 @@ static int simpledrm_device_init_clocks(struct
simpledrm_device *sdev)
}
#endif
+#if defined CONFIG_OF && defined CONFIG_REGULATOR
+
+#define SUPPLY_SUFFIX "-supply"
+
+/*
+ * Regulator handling code.
+ *
+ * Here we handle the num-supplies and vin*-supply properties of our
+ * "simple-framebuffer" dt node. This is necessary so that we can
make sure
+ * that any regulators needed by the display hardware that the bootloader
+ * set up for us (and for which it provided a simplefb dt node), stay up,
+ * for the life of the simplefb driver.
+ *
+ * When the driver unloads, we cleanly disable, and then release the
+ * regulators.
+ *
+ * We only complain about errors here, no action is taken as the most likely
+ * error can only happen due to a mismatch between the bootloader which set
+ * up simplefb, and the regulator definitions in the device tree. Chances are
+ * that there are no adverse effects, and if there are, a clean teardown of
+ * the fb probe will not help us much either. So just complain and carry on,
+ * and hope that the user actually gets a working fb at the end of things.
+ */
+
+static void simpledrm_device_release_regulators(void *res)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(res);
+ unsigned int i;
+
+ for (i = 0; i < sdev->regulator_count; ++i) {
+ if (sdev->regulators[i]) {
+ regulator_disable(sdev->regulators[i]);
+ regulator_put(sdev->regulators[i]);
+ }
+ }
+}
+
+static int simpledrm_device_init_regulators(struct simpledrm_device *sdev)
+{
+ struct drm_device *dev = &sdev->dev;
+ struct platform_device *pdev = sdev->pdev;
+ struct device_node *of_node = pdev->dev.of_node;
+ struct property *prop;
+ struct regulator *regulator;
+ const char *p;
+ unsigned int count = 0, i = 0;
+ int ret;
+
+ if (dev_get_platdata(&pdev->dev) || !of_node)
+ return 0;
+
+ /* Count the number of regulator supplies */
+ for_each_property_of_node(of_node, prop) {
+ p = strstr(prop->name, SUPPLY_SUFFIX);
+ if (p && p != prop->name)
+ ++count;
+ }
+
+ if (!count)
+ return 0;
+
+ sdev->regulators = drmm_kzalloc(dev,
+ count * sizeof(sdev->regulators[0]),
+ GFP_KERNEL);
+ if (!sdev->regulators)
+ return -ENOMEM;
+
+ for_each_property_of_node(of_node, prop) {
+ char name[32]; /* 32 is max size of property name */
+ size_t len;
+
+ p = strstr(prop->name, SUPPLY_SUFFIX);
+ if (!p || p == prop->name)
+ continue;
+ len = strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1;
+ strscpy(name, prop->name, min(sizeof(name), len));
+
+ regulator = regulator_get_optional(&pdev->dev, name);
+ if (IS_ERR(regulator)) {
+ ret = PTR_ERR(regulator);
+ if (ret == -EPROBE_DEFER)
+ goto err;
+ drm_err(dev, "regulator %s not found: %d\n",
+ name, ret);
+ continue;
+ }
+
+ ret = regulator_enable(regulator);
+ if (ret) {
+ drm_err(dev, "failed to enable regulator %u: %d\n",
+ i, ret);
+ regulator_put(regulator);
+ }
+
+ sdev->regulators[i++] = regulator;
+ }
+ sdev->regulator_count = i;
+
+ return devm_add_action_or_reset(&pdev->dev,
+ simpledrm_device_release_regulators,
+ sdev);
+
+err:
+ while (i) {
+ --i;
+ if (sdev->regulators[i]) {
+ regulator_disable(sdev->regulators[i]);
+ regulator_put(sdev->regulators[i]);
+ }
+ }
+ return ret;
+}
+#else
+static int simpledrm_device_init_regulators(struct simpledrm_device *sdev)
+{
+ return 0;
+}
+#endif
+
/*
* Simplefb settings
*/
@@ -658,6 +783,9 @@ simpledrm_device_create(struct drm_driver *drv, struct
platform_device *pdev)
platform_set_drvdata(pdev, sdev);
ret = simpledrm_device_init_clocks(sdev);
+ if (ret)
+ return ERR_PTR(ret);
+ ret = simpledrm_device_init_regulators(sdev);
if (ret)
return ERR_PTR(ret);
ret = simpledrm_device_init_fb(sdev);
--
2.31.1
Thomas Zimmermann
2021-Apr-15 08:53 UTC
[PATCH v3 9/9] drm/simpledrm: Acquire memory aperture for framebuffer
We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.
The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.
v3:
* use platform_device_unregister() and handle detachment
like hot-unplug event (Daniel)
v2:
* adapt to aperture changes
* use drm_dev_unplug() and drm_dev_enter/exit()
* don't split error string
Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
Tested-by: nerdopolis <bluescreen_avenger at verizon.net>
---
drivers/gpu/drm/tiny/simpledrm.c | 49 +++++++++++++++++++++++++++++++-
1 file changed, 48 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 9d522473cd7c..14473e1bccab 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -6,6 +6,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <drm/drm_aperture.h>
#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_damage_helper.h>
@@ -515,16 +516,49 @@ static int simpledrm_device_init_fb(struct
simpledrm_device *sdev)
* Memory management
*/
+static void simpledrm_aperture_detach(struct drm_device *dev, resource_size_t
base,
+ resource_size_t size)
+{
+ struct simpledrm_device *sdev = simpledrm_device_of_dev(dev);
+ struct platform_device *pdev = sdev->pdev;
+
+ /*
+ * Remove the device from the bus itself. This is the right thing to
+ * do for the generic DRM drivers, such as EFI, VESA or VGA. When the
+ * new driver takes over the hardware, the generic device's state will
+ * be lost.
+ *
+ * If the aperture helpers need to handle native drivers, this call
+ * would only have to unplug the DRM device, so that the hardware device
+ * stays around after detachment.
+ */
+ platform_device_unregister(pdev);
+}
+
+static const struct drm_aperture_funcs simpledrm_aperture_funcs = {
+ .detach = simpledrm_aperture_detach,
+};
+
static int simpledrm_device_init_mm(struct simpledrm_device *sdev)
{
+ struct drm_device *dev = &sdev->dev;
struct platform_device *pdev = sdev->pdev;
struct resource *mem;
void __iomem *screen_base;
+ int ret;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem)
return -EINVAL;
+ ret = devm_aperture_acquire(dev, mem->start, resource_size(mem),
+ &simpledrm_aperture_funcs);
+ if (ret) {
+ drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error
%d\n",
+ mem->start, mem->end, ret);
+ return ret;
+ }
+
screen_base = devm_ioremap_wc(&pdev->dev, mem->start,
resource_size(mem));
if (!screen_base)
@@ -625,12 +659,18 @@ simpledrm_simple_display_pipe_enable(struct
drm_simple_display_pipe *pipe,
struct drm_shadow_plane_state *shadow_plane_state =
to_drm_shadow_plane_state(plane_state);
struct drm_framebuffer *fb = plane_state->fb;
void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping
abstraction properly */
+ struct drm_device *dev = &sdev->dev;
+ int idx;
if (!fb)
return;
+ if (!drm_dev_enter(dev, &idx))
+ return;
+
drm_fb_blit_dstclip(sdev->screen_base, sdev->pitch,
sdev->format->format, vmap, fb);
+ drm_dev_exit(idx);
}
static void
@@ -658,7 +698,9 @@ simpledrm_simple_display_pipe_update(struct
drm_simple_display_pipe *pipe,
struct drm_shadow_plane_state *shadow_plane_state =
to_drm_shadow_plane_state(plane_state);
void *vmap = shadow_plane_state->map[0].vaddr; /* TODO: Use mapping
abstraction properly */
struct drm_framebuffer *fb = plane_state->fb;
+ struct drm_device *dev = &sdev->dev;
struct drm_rect clip;
+ int idx;
if (!fb)
return;
@@ -666,8 +708,13 @@ simpledrm_simple_display_pipe_update(struct
drm_simple_display_pipe *pipe,
if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip))
return;
+ if (!drm_dev_enter(dev, &idx))
+ return;
+
drm_fb_blit_rect_dstclip(sdev->screen_base, sdev->pitch,
sdev->format->format, vmap, fb, &clip);
+
+ drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs
@@ -847,7 +894,7 @@ static int simpledrm_remove(struct platform_device *pdev)
struct simpledrm_device *sdev = platform_get_drvdata(pdev);
struct drm_device *dev = &sdev->dev;
- drm_dev_unregister(dev);
+ drm_dev_unplug(dev);
return 0;
}
--
2.31.1