thr3ads.net - Virtualization - [PATCH linux-next 0/9] vdpa: Enable user to set mac address, [Feb 2021]

If this information is useful, please help other people find it:
Share via:

Parav Pandit

2021-Feb-24 06:18 UTC

[PATCH linux-next 0/9] vdpa: Enable user to set mac address,

Currently user cannot set the mac address and mtu of the vdpa device.
This patchset enables users to set the mac address and mtu of the vdpa
device once the device is created.
If a vendor driver supports such configuration user can set it otherwise
user gets unsupported error.

vdpa mac address and mtu are device configuration layout fields.
To keep interface generic enough for multiple types of vdpa devices, mac
address and mtu setting is implemented as configuration layout config
knobs.
This enables to use similar config layout for other virtio devices.

An example of query & set of config layout fields for vdpa_sim_net
driver:

Configuration layout fields are set after device is created.
This enables user to change such fields at later point without destroying and
recreating the device for new config.

$ vdpa mgmtdev show
vdpasim_net:
  supported_classes net

Add the device:
$ vdpa dev add name bar mgmtdev vdpasim_net

Configure mac address and mtu:
$ vdpa dev config set bar mac 00:11:22:33:44:55 mtu 9000

In above command only mac address or only mtu can also be set.

View the config after setting:
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 speed 0 duplex 0

Patch summary:
Patch-1 uses read only features bit to detect endianness
Patch-2 implements new config layout query command
Patch-3 implements callback for setting vdpa net config fields
Patch-4 extends vdpa_sim_net driver to implement mac, mtu setting
Patch-5 removed redundant get_config callback
Patch-6 mlx5 vdpa driver migrates to user created vdpa device
Patch-7 mlx5 vdpa driver uses random mac address when not configured
Patch-8 mlx5 vdpa driver supports user provided mac config
Patch-9 mlx5 vdpa driver uses user provided mac during rx flow steering

Eli Cohen (4):
  vdpa/mlx5: Enable user to add/delete vdpa device
  vdpa/mlx5: Provide device generated random MAC address
  vdpa/mlx5: Support configuration of MAC
  vdpa/mlx5: Forward only packets with allowed MAC address

Parav Pandit (5):
  vdpa_sim: Consider read only supported features instead of current
  vdpa: Introduce query of device config layout
  vdpa: Enable user to set mac and mtu of vdpa device
  vdpa_sim_net: Enable user to set mac address and mtu
  vdpa_sim_net: Remove redundant get_config callback

 drivers/vdpa/mlx5/net/mlx5_vnet.c    | 185 ++++++++++++++----
 drivers/vdpa/vdpa.c                  | 270 +++++++++++++++++++++++++++
 drivers/vdpa/vdpa_sim/vdpa_sim.h     |   4 +-
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c |  49 +++--
 include/linux/vdpa.h                 |  16 ++
 include/uapi/linux/vdpa.h            |  12 ++
 6 files changed, 476 insertions(+), 60 deletions(-)

-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 1/9] vdpa_sim: Consider read only supported features instead of current

To honor VIRTIO_F_VERSION_1 feature bit, during endianness detection,
consider the read only supported features bit instead of current
features bit which can be modified by the driver.

This enables vdpa_sim_net driver to invoke cpu_to_vdpasim16() early
enough just after vdpasim device creation in subsequent patch.

Signed-off-by: Parav Pandit <parav at nvidia.com>
Reviewed-by: Eli Cohen <elic at nvidia.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.h b/drivers/vdpa/vdpa_sim/vdpa_sim.h
index 6d75444f9948..176d641a0939 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim.h
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim.h
@@ -11,6 +11,7 @@
 #include <linux/virtio_byteorder.h>
 #include <linux/vhost_iotlb.h>
 #include <uapi/linux/virtio_config.h>
+#include <linux/bits.h>
 
 #define VDPASIM_FEATURES	((1ULL << VIRTIO_F_ANY_LAYOUT) | \
 				 (1ULL << VIRTIO_F_VERSION_1)  | \
@@ -71,7 +72,8 @@ struct vdpasim *vdpasim_create(struct vdpasim_dev_attr *attr);
 static inline bool vdpasim_is_little_endian(struct vdpasim *vdpasim)
 {
 	return virtio_legacy_is_little_endian() ||
-		(vdpasim->features & (1ULL << VIRTIO_F_VERSION_1));
+		(vdpasim->dev_attr.supported_features &
+		 BIT_ULL(VIRTIO_F_VERSION_1));
 }
 
 static inline u16 vdpasim16_to_cpu(struct vdpasim *vdpasim, __virtio16 val)
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 2/9] vdpa: Introduce query of device config layout

Introduce a command to query a device config layout.

An example query of network vdpa device:

$ vdpa dev add name bar mgmtdev vdpasim_net

$ vdpa dev config show
bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500 speed 0 duplex 0

$ vdpa dev config show -jp
{
    "config": {
        "bar": {
            "mac": "00:35:09:19:48:05",
            "link ": "up",
            "link_announce ": false,
            "mtu": 1500,
            "speed": 0,
            "duplex": 0
        }
    }
}

Signed-off-by: Parav Pandit <parav at nvidia.com>
Reviewed-by: Eli Cohen <elic at nvidia.com>
---
changelog:
v1->v2:
 - read whole net config layout instead of individual fields
 - added error extack for unmanaged vdpa device
---
 drivers/vdpa/vdpa.c       | 181 ++++++++++++++++++++++++++++++++++++++
 include/uapi/linux/vdpa.h |  11 +++
 2 files changed, 192 insertions(+)

diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 3d997b389345..cebbba500638 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -14,6 +14,8 @@
 #include <uapi/linux/vdpa.h>
 #include <net/genetlink.h>
 #include <linux/mod_devicetable.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ids.h>
 
 static LIST_HEAD(mdev_head);
 /* A global mutex that protects vdpa management device and device level
operations. */
@@ -603,6 +605,179 @@ static int vdpa_nl_cmd_dev_get_dumpit(struct sk_buff *msg,
struct netlink_callba
 	return msg->len;
 }
 
+static int vdpa_dev_net_mq_config_fill(struct vdpa_device *vdev,
+				       struct sk_buff *msg,
+				       const struct virtio_net_config *config)
+{
+	u32 hash_types;
+	u16 rss_field;
+	u64 features;
+
+	features = vdev->config->get_features(vdev);
+	if ((features & (1ULL << VIRTIO_NET_F_MQ)) == 0)
+		return 0;
+
+	if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MAX_VQP,
+			config->max_virtqueue_pairs))
+		return -EMSGSIZE;
+	if (nla_put_u8(msg, VDPA_ATTR_DEV_NET_CFG_RSS_MAX_KEY_LEN,
+		       config->rss_max_key_size))
+		return -EMSGSIZE;
+
+	rss_field = le16_to_cpu(config->rss_max_key_size);
+	if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_RSS_MAX_IT_LEN, rss_field))
+		return -EMSGSIZE;
+
+	hash_types = le32_to_cpu(config->supported_hash_types);
+	if (nla_put_u32(msg, VDPA_ATTR_DEV_NET_CFG_RSS_HASH_TYPES,
+			config->supported_hash_types))
+		return -EMSGSIZE;
+	return 0;
+}
+
+static int vdpa_dev_net_config_fill(struct vdpa_device *vdev, struct sk_buff
*msg)
+{
+	struct virtio_net_config config = {};
+
+	vdev->config->get_config(vdev, 0, &config, sizeof(config));
+	if (nla_put(msg, VDPA_ATTR_DEV_NET_CFG_MACADDR, sizeof(config.mac),
config.mac))
+		return -EMSGSIZE;
+	if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_STATUS, config.status))
+		return -EMSGSIZE;
+	if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MTU, config.mtu))
+		return -EMSGSIZE;
+	if (nla_put_u32(msg, VDPA_ATTR_DEV_NET_CFG_SPEED, config.speed))
+		return -EMSGSIZE;
+	if (nla_put_u8(msg, VDPA_ATTR_DEV_NET_CFG_DUPLEX, config.duplex))
+		return -EMSGSIZE;
+
+	return vdpa_dev_net_mq_config_fill(vdev, msg, &config);
+}
+
+static int
+vdpa_dev_config_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 portid,
u32 seq,
+		     int flags, struct netlink_ext_ack *extack)
+{
+	u32 device_id;
+	void *hdr;
+	int err;
+
+	hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags,
+			  VDPA_CMD_DEV_CONFIG_GET);
+	if (!hdr)
+		return -EMSGSIZE;
+
+	if (nla_put_string(msg, VDPA_ATTR_DEV_NAME, dev_name(&vdev->dev))) {
+		err = -EMSGSIZE;
+		goto msg_err;
+	}
+
+	device_id = vdev->config->get_device_id(vdev);
+	if (nla_put_u32(msg, VDPA_ATTR_DEV_ID, device_id)) {
+		err = -EMSGSIZE;
+		goto msg_err;
+	}
+
+	switch (device_id) {
+	case VIRTIO_ID_NET:
+		err = vdpa_dev_net_config_fill(vdev, msg);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+	if (err)
+		goto msg_err;
+
+	genlmsg_end(msg, hdr);
+	return 0;
+
+msg_err:
+	genlmsg_cancel(msg, hdr);
+	return err;
+}
+
+static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct
genl_info *info)
+{
+	struct vdpa_device *vdev;
+	struct sk_buff *msg;
+	const char *devname;
+	struct device *dev;
+	int err;
+
+	if (!info->attrs[VDPA_ATTR_DEV_NAME])
+		return -EINVAL;
+	devname = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
+	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	mutex_lock(&vdpa_dev_mutex);
+	dev = bus_find_device(&vdpa_bus, NULL, devname, vdpa_name_match);
+	if (!dev) {
+		NL_SET_ERR_MSG_MOD(info->extack, "device not found");
+		err = -ENODEV;
+		goto dev_err;
+	}
+	vdev = container_of(dev, struct vdpa_device, dev);
+	if (!vdev->mdev) {
+		NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
+		err = -EINVAL;
+		goto mdev_err;
+	}
+	err = vdpa_dev_config_fill(vdev, msg, info->snd_portid, info->snd_seq,
+				   0, info->extack);
+	if (!err)
+		err = genlmsg_reply(msg, info);
+
+mdev_err:
+	put_device(dev);
+dev_err:
+	mutex_unlock(&vdpa_dev_mutex);
+	if (err)
+		nlmsg_free(msg);
+	return err;
+}
+
+static int vdpa_dev_config_dump(struct device *dev, void *data)
+{
+	struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
+	struct vdpa_dev_dump_info *info = data;
+	int err;
+
+	if (!vdev->mdev)
+		return 0;
+	if (info->idx < info->start_idx) {
+		info->idx++;
+		return 0;
+	}
+	err = vdpa_dev_config_fill(vdev, info->msg,
NETLINK_CB(info->cb->skb).portid,
+				   info->cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				   info->cb->extack);
+	if (err)
+		return err;
+
+	info->idx++;
+	return 0;
+}
+
+static int
+vdpa_nl_cmd_dev_config_get_dumpit(struct sk_buff *msg, struct netlink_callback
*cb)
+{
+	struct vdpa_dev_dump_info info;
+
+	info.msg = msg;
+	info.cb = cb;
+	info.start_idx = cb->args[0];
+	info.idx = 0;
+
+	mutex_lock(&vdpa_dev_mutex);
+	bus_for_each_dev(&vdpa_bus, NULL, &info, vdpa_dev_config_dump);
+	mutex_unlock(&vdpa_dev_mutex);
+	cb->args[0] = info.idx;
+	return msg->len;
+}
+
 static const struct nla_policy vdpa_nl_policy[VDPA_ATTR_MAX + 1] = {
 	[VDPA_ATTR_MGMTDEV_BUS_NAME] = { .type = NLA_NUL_STRING },
 	[VDPA_ATTR_MGMTDEV_DEV_NAME] = { .type = NLA_STRING },
@@ -634,6 +809,12 @@ static const struct genl_ops vdpa_nl_ops[] = {
 		.doit = vdpa_nl_cmd_dev_get_doit,
 		.dumpit = vdpa_nl_cmd_dev_get_dumpit,
 	},
+	{
+		.cmd = VDPA_CMD_DEV_CONFIG_GET,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = vdpa_nl_cmd_dev_config_get_doit,
+		.dumpit = vdpa_nl_cmd_dev_config_get_dumpit,
+	},
 };
 
 static struct genl_family vdpa_nl_family __ro_after_init = {
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 66a41e4ec163..5c31ecc3b956 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -17,6 +17,7 @@ enum vdpa_command {
 	VDPA_CMD_DEV_NEW,
 	VDPA_CMD_DEV_DEL,
 	VDPA_CMD_DEV_GET,		/* can dump */
+	VDPA_CMD_DEV_CONFIG_GET,	/* can dump */
 };
 
 enum vdpa_attr {
@@ -33,6 +34,16 @@ enum vdpa_attr {
 	VDPA_ATTR_DEV_MAX_VQS,			/* u32 */
 	VDPA_ATTR_DEV_MAX_VQ_SIZE,		/* u16 */
 
+	VDPA_ATTR_DEV_NET_CFG_MACADDR,		/* binary */
+	VDPA_ATTR_DEV_NET_STATUS,		/* u8 */
+	VDPA_ATTR_DEV_NET_CFG_MAX_VQP,		/* u16 */
+	VDPA_ATTR_DEV_NET_CFG_MTU,		/* u16 */
+	VDPA_ATTR_DEV_NET_CFG_SPEED,		/* u16 */
+	VDPA_ATTR_DEV_NET_CFG_DUPLEX,		/* u16 */
+	VDPA_ATTR_DEV_NET_CFG_RSS_MAX_KEY_LEN,	/* u8 */
+	VDPA_ATTR_DEV_NET_CFG_RSS_MAX_IT_LEN,	/* u16 */
+	VDPA_ATTR_DEV_NET_CFG_RSS_HASH_TYPES,	/* u32 */
+
 	/* new attributes must be added above here */
 	VDPA_ATTR_MAX,
 };
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 3/9] vdpa: Enable user to set mac and mtu of vdpa device

$ vdpa dev add name bar mgmtdev vdpasim_net

$ vdpa dev config set bar mac 00:11:22:33:44:55 mtu 9000

$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 speed 0 duplex 0

$ vdpa dev config show -jp
{
    "config": {
        "bar": {
            "mac": "00:11:22:33:44:55",
            "link ": "up",
            "link_announce ": false,
            "mtu": 9000,
            "speed": 0,
            "duplex": 0
        }
    }
}

Signed-off-by: Parav Pandit <parav at nvidia.com>
Reviewed-by: Eli Cohen <elic at nvidia.com>
---
 drivers/vdpa/vdpa.c       | 89 +++++++++++++++++++++++++++++++++++++++
 include/linux/vdpa.h      | 16 +++++++
 include/uapi/linux/vdpa.h |  1 +
 3 files changed, 106 insertions(+)

diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index cebbba500638..ae4656dcea16 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -778,10 +778,93 @@ vdpa_nl_cmd_dev_config_get_dumpit(struct sk_buff *msg,
struct netlink_callback *
 	return msg->len;
 }
 
+static void build_dev_net_config_attrs(struct genl_info *info,
+				       struct vdpa_dev_config_set_attr *attrs)
+{
+	struct nlattr **nl_attrs = info->attrs;
+	const u8 *macaddr;
+
+	if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
+		macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
+		memcpy(attrs->cfg.mac, macaddr, sizeof(attrs->cfg.mac));
+		attrs->mask.mac_valid = true;
+	}
+	if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MTU]) {
+		attrs->cfg.mtu +			nla_get_u16(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MTU]);
+		attrs->mask.mtu_valid = true;
+	}
+}
+
+static int
+vdpa_dev_net_config_set(struct vdpa_device *vdev,
+			const struct vdpa_dev_config_set_attr *attrs)
+{
+	struct vdpa_mgmt_dev *mdev = vdev->mdev;
+
+	if (!mdev->ops->dev_config_set)
+		return -EOPNOTSUPP;
+	return mdev->ops->dev_config_set(mdev, vdev, attrs);
+}
+
+static int vdpa_dev_config_set(struct vdpa_device *vdev, struct genl_info
*info)
+{
+	struct vdpa_dev_config_set_attr attrs = {};
+	int err = -EOPNOTSUPP;
+	u32 device_id;
+
+	if (!vdev->mdev)
+		return -EOPNOTSUPP;
+
+	device_id = vdev->config->get_device_id(vdev);
+	switch (device_id) {
+	case VIRTIO_ID_NET:
+		build_dev_net_config_attrs(info, &attrs);
+		err = vdpa_dev_net_config_set(vdev, &attrs);
+		break;
+	default:
+		break;
+	}
+	return err;
+}
+
+static int vdpa_nl_cmd_dev_config_set_doit(struct sk_buff *skb, struct
genl_info *info)
+{
+	struct vdpa_device *vdev;
+	const char *devname;
+	struct device *dev;
+	int err;
+
+	if (!info->attrs[VDPA_ATTR_DEV_NAME])
+		return -EINVAL;
+	devname = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
+
+	mutex_lock(&vdpa_dev_mutex);
+	dev = bus_find_device(&vdpa_bus, NULL, devname, vdpa_name_match);
+	if (!dev) {
+		mutex_unlock(&vdpa_dev_mutex);
+		NL_SET_ERR_MSG_MOD(info->extack, "device not found");
+		return -ENODEV;
+	}
+	vdev = container_of(dev, struct vdpa_device, dev);
+	if (!vdev->mdev) {
+		mutex_unlock(&vdpa_dev_mutex);
+		put_device(dev);
+		return -EINVAL;
+	}
+	err = vdpa_dev_config_set(vdev, info);
+	put_device(dev);
+	mutex_unlock(&vdpa_dev_mutex);
+	return err;
+}
+
 static const struct nla_policy vdpa_nl_policy[VDPA_ATTR_MAX + 1] = {
 	[VDPA_ATTR_MGMTDEV_BUS_NAME] = { .type = NLA_NUL_STRING },
 	[VDPA_ATTR_MGMTDEV_DEV_NAME] = { .type = NLA_STRING },
 	[VDPA_ATTR_DEV_NAME] = { .type = NLA_STRING },
+	[VDPA_ATTR_DEV_NET_CFG_MACADDR] = NLA_POLICY_EXACT_LEN(ETH_ALEN),
+	/* virtio spec 1.1 section 5.1.4.1 for valid MTU range */
+	[VDPA_ATTR_DEV_NET_CFG_MTU] = NLA_POLICY_RANGE(NLA_U16, 68, 65535),
 };
 
 static const struct genl_ops vdpa_nl_ops[] = {
@@ -815,6 +898,12 @@ static const struct genl_ops vdpa_nl_ops[] = {
 		.doit = vdpa_nl_cmd_dev_config_get_doit,
 		.dumpit = vdpa_nl_cmd_dev_config_get_dumpit,
 	},
+	{
+		.cmd = VDPA_CMD_DEV_CONFIG_SET,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = vdpa_nl_cmd_dev_config_set_doit,
+		.flags = GENL_ADMIN_PERM,
+	},
 };
 
 static struct genl_family vdpa_nl_family __ro_after_init = {
diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h
index 4ab5494503a8..c43a9e86c0ee 100644
--- a/include/linux/vdpa.h
+++ b/include/linux/vdpa.h
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/vhost_iotlb.h>
+#include <linux/virtio_net.h>
 
 /**
  * vDPA callback definition.
@@ -343,6 +344,14 @@ static inline void vdpa_get_config(struct vdpa_device
*vdev, unsigned offset,
 	ops->get_config(vdev, offset, buf, len);
 }
 
+struct vdpa_dev_config_set_attr {
+	struct virtio_net_config cfg;
+	struct {
+		u8 mac_valid : 1;
+		u8 mtu_valid : 1;
+	} mask;
+};
+
 /**
  * vdpa_mgmtdev_ops - vdpa device ops
  * @dev_add:	Add a vdpa device using alloc and register
@@ -356,10 +365,17 @@ static inline void vdpa_get_config(struct vdpa_device
*vdev, unsigned offset,
  *		@dev: vdpa device to remove
  *		Driver need to remove the specified device by calling
  *		_vdpa_unregister_device().
+ * @dev_config_set: Setup one or more fields of the device configuration layout
+ *		    @mdev: management device of the vdpa device
+ *		    @dev: vdpa device whose config fields to setup/modify
+ *		    @attrs: attributes to updated
  */
 struct vdpa_mgmtdev_ops {
 	int (*dev_add)(struct vdpa_mgmt_dev *mdev, const char *name);
 	void (*dev_del)(struct vdpa_mgmt_dev *mdev, struct vdpa_device *dev);
+	int (*dev_config_set)(struct vdpa_mgmt_dev *mdev,
+			      struct vdpa_device *dev,
+			      const struct vdpa_dev_config_set_attr *attrs);
 };
 
 struct vdpa_mgmt_dev {
diff --git a/include/uapi/linux/vdpa.h b/include/uapi/linux/vdpa.h
index 5c31ecc3b956..ec349789b8d1 100644
--- a/include/uapi/linux/vdpa.h
+++ b/include/uapi/linux/vdpa.h
@@ -18,6 +18,7 @@ enum vdpa_command {
 	VDPA_CMD_DEV_DEL,
 	VDPA_CMD_DEV_GET,		/* can dump */
 	VDPA_CMD_DEV_CONFIG_GET,	/* can dump */
+	VDPA_CMD_DEV_CONFIG_SET,
 };
 
 enum vdpa_attr {
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 4/9] vdpa_sim_net: Enable user to set mac address and mtu

Enable user to set the mac address and mtu so that each vdpa device
can have its own user specified mac address and mtu.
This is done by implementing the management device's configuration
layout fields setting callback routine.

Now that user is enabled to set the mac address, remove the module
parameter for same.

And example of setting mac addr and mtu:
$ vdpa mgmtdev show

$ vdpa dev add name bar mgmtdev vdpasim_net
$ vdpa dev config set bar mac 00:11:22:33:44:55 mtu 9000

View the config after setting:
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 speed 0 duplex 0

Signed-off-by: Parav Pandit <parav at nvidia.com>
Reviewed-by: Eli Cohen <elic at nvidia.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 39 ++++++++++++++++------------
 1 file changed, 22 insertions(+), 17 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
index 240a5f1306b5..6e941b0e7935 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -29,12 +29,6 @@
 
 #define VDPASIM_NET_VQ_NUM	2
 
-static char *macaddr;
-module_param(macaddr, charp, 0);
-MODULE_PARM_DESC(macaddr, "Ethernet MAC address");
-
-static u8 macaddr_buf[ETH_ALEN];
-
 static void vdpasim_net_work(struct work_struct *work)
 {
 	struct vdpasim *vdpasim = container_of(work, struct vdpasim, work);
@@ -113,9 +107,7 @@ static void vdpasim_net_get_config(struct vdpasim *vdpasim,
void *config)
 	struct virtio_net_config *net_config  		(struct virtio_net_config *)config;
 
-	net_config->mtu = cpu_to_vdpasim16(vdpasim, 1500);
 	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
-	memcpy(net_config->mac, macaddr_buf, ETH_ALEN);
 }
 
 static void vdpasim_net_mgmtdev_release(struct device *dev)
@@ -134,6 +126,7 @@ static struct device vdpasim_net_mgmtdev_dummy = {
 
 static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev, const char *name)
 {
+	struct virtio_net_config *cfg;
 	struct vdpasim_dev_attr dev_attr = {};
 	struct vdpasim *simdev;
 	int ret;
@@ -152,6 +145,10 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev,
const char *name)
 	if (IS_ERR(simdev))
 		return PTR_ERR(simdev);
 
+	cfg = simdev->config;
+	eth_random_addr(cfg->mac);
+	cfg->mtu = cpu_to_vdpasim16(simdev, 1500);
+
 	ret = _vdpa_register_device(&simdev->vdpa);
 	if (ret)
 		goto reg_err;
@@ -171,9 +168,25 @@ static void vdpasim_net_dev_del(struct vdpa_mgmt_dev *mdev,
 	_vdpa_unregister_device(&simdev->vdpa);
 }
 
+static int
+vdpasim_net_dev_config_set(struct vdpa_mgmt_dev *mdev,
+			   struct vdpa_device *dev,
+			   const struct vdpa_dev_config_set_attr *attrs)
+{
+	struct vdpasim *simdev = container_of(dev, struct vdpasim, vdpa);
+	struct virtio_net_config *dev_cfg = simdev->config;
+
+	if (attrs->mask.mac_valid)
+		memcpy(dev_cfg->mac, attrs->cfg.mac, sizeof(dev_cfg->mac));
+	if (attrs->mask.mtu_valid)
+		dev_cfg->mtu = cpu_to_vdpasim16(simdev, attrs->cfg.mtu);
+	return 0;
+}
+
 static const struct vdpa_mgmtdev_ops vdpasim_net_mgmtdev_ops = {
 	.dev_add = vdpasim_net_dev_add,
-	.dev_del = vdpasim_net_dev_del
+	.dev_del = vdpasim_net_dev_del,
+	.dev_config_set = vdpasim_net_dev_config_set,
 };
 
 static struct virtio_device_id id_table[] = {
@@ -198,14 +211,6 @@ static int __init vdpasim_net_init(void)
 {
 	int ret;
 
-	if (macaddr) {
-		mac_pton(macaddr, macaddr_buf);
-		if (!is_valid_ether_addr(macaddr_buf))
-			return -EADDRNOTAVAIL;
-	} else {
-		eth_random_addr(macaddr_buf);
-	}
-
 	ret = device_register(&vdpasim_net_mgmtdev);
 	if (ret)
 		return ret;
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 5/9] vdpa_sim_net: Remove redundant get_config callback

Now that mac address and mtu are set in the vdpa_sim allocated config
space and read from the vdpa_sim maintained memory area, remove
get_config callback implementation.

Link status is setup only once, set up once after config space is
allocated by the vdpa_sim.

Signed-off-by: Parav Pandit <parav at nvidia.com>
Reviewed-by: Eli Cohen <elic at nvidia.com>
---
 drivers/vdpa/vdpa_sim/vdpa_sim_net.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
index 6e941b0e7935..61f1d37d8d60 100644
--- a/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
+++ b/drivers/vdpa/vdpa_sim/vdpa_sim_net.c
@@ -102,14 +102,6 @@ static void vdpasim_net_work(struct work_struct *work)
 	spin_unlock(&vdpasim->lock);
 }
 
-static void vdpasim_net_get_config(struct vdpasim *vdpasim, void *config)
-{
-	struct virtio_net_config *net_config -		(struct virtio_net_config *)config;
-
-	net_config->status = cpu_to_vdpasim16(vdpasim, VIRTIO_NET_S_LINK_UP);
-}
-
 static void vdpasim_net_mgmtdev_release(struct device *dev)
 {
 }
@@ -137,7 +129,6 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev,
const char *name)
 	dev_attr.supported_features = VDPASIM_NET_FEATURES;
 	dev_attr.nvqs = VDPASIM_NET_VQ_NUM;
 	dev_attr.config_size = sizeof(struct virtio_net_config);
-	dev_attr.get_config = vdpasim_net_get_config;
 	dev_attr.work_fn = vdpasim_net_work;
 	dev_attr.buffer_size = PAGE_SIZE;
 
@@ -148,6 +139,7 @@ static int vdpasim_net_dev_add(struct vdpa_mgmt_dev *mdev,
const char *name)
 	cfg = simdev->config;
 	eth_random_addr(cfg->mac);
 	cfg->mtu = cpu_to_vdpasim16(simdev, 1500);
+	cfg->status = cpu_to_vdpasim16(simdev, VIRTIO_NET_S_LINK_UP);
 
 	ret = _vdpa_register_device(&simdev->vdpa);
 	if (ret)
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 6/9] vdpa/mlx5: Enable user to add/delete vdpa device

From: Eli Cohen <elic at nvidia.com>

Allow to control vdpa device creation and destruction using the vdpa
management tool.

Examples:
1. List the management devices
$ vdpa mgmtdev show
pci/0000:3b:00.1:
  supported_classes net

2. Create vdpa instance
$ vdpa dev add mgmtdev pci/0000:3b:00.1 name vdpa0

3. Show vdpa devices
$ vdpa dev show
vdpa0: type network mgmtdev pci/0000:3b:00.1 vendor_id 5555 max_vqs 16 \
max_vq_size 256

Signed-off-by: Eli Cohen <elic at nvidia.com>
Reviewed-by: Parav Pandit <parav at nvidia.com>
Acked-by: Jason Wang <jasowang at redhat.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 79 +++++++++++++++++++++++++++----
 1 file changed, 70 insertions(+), 9 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 10e9b09932eb..b67bba581dfd 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1966,23 +1966,32 @@ static void init_mvqs(struct mlx5_vdpa_net *ndev)
 	}
 }
 
-static int mlx5v_probe(struct auxiliary_device *adev,
-		       const struct auxiliary_device_id *id)
+struct mlx5_vdpa_mgmtdev {
+	struct vdpa_mgmt_dev mgtdev;
+	struct mlx5_adev *madev;
+	struct mlx5_vdpa_net *ndev;
+};
+
+static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
 {
-	struct mlx5_adev *madev = container_of(adev, struct mlx5_adev, adev);
-	struct mlx5_core_dev *mdev = madev->mdev;
+	struct mlx5_vdpa_mgmtdev *mgtdev = container_of(v_mdev, struct
mlx5_vdpa_mgmtdev, mgtdev);
 	struct virtio_net_config *config;
 	struct mlx5_vdpa_dev *mvdev;
 	struct mlx5_vdpa_net *ndev;
+	struct mlx5_core_dev *mdev;
 	u32 max_vqs;
 	int err;
 
+	if (mgtdev->ndev)
+		return -ENOSPC;
+
+	mdev = mgtdev->madev->mdev;
 	/* we save one virtqueue for control virtqueue should we require it */
 	max_vqs = MLX5_CAP_DEV_VDPA_EMULATION(mdev, max_num_virtio_queues);
 	max_vqs = min_t(u32, max_vqs, MLX5_MAX_SUPPORTED_VQS);
 
 	ndev = vdpa_alloc_device(struct mlx5_vdpa_net, mvdev.vdev, mdev->device,
&mlx5_vdpa_ops,
-				 2 * mlx5_vdpa_max_qps(max_vqs), NULL);
+				 2 * mlx5_vdpa_max_qps(max_vqs), name);
 	if (IS_ERR(ndev))
 		return PTR_ERR(ndev);
 
@@ -2009,11 +2018,12 @@ static int mlx5v_probe(struct auxiliary_device *adev,
 	if (err)
 		goto err_res;
 
-	err = vdpa_register_device(&mvdev->vdev);
+	mvdev->vdev.mdev = &mgtdev->mgtdev;
+	err = _vdpa_register_device(&mvdev->vdev);
 	if (err)
 		goto err_reg;
 
-	dev_set_drvdata(&adev->dev, ndev);
+	mgtdev->ndev = ndev;
 	return 0;
 
 err_reg:
@@ -2026,11 +2036,62 @@ static int mlx5v_probe(struct auxiliary_device *adev,
 	return err;
 }
 
+static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev *v_mdev, struct vdpa_device
*dev)
+{
+	struct mlx5_vdpa_mgmtdev *mgtdev = container_of(v_mdev, struct
mlx5_vdpa_mgmtdev, mgtdev);
+
+	_vdpa_unregister_device(dev);
+	mgtdev->ndev = NULL;
+}
+
+static const struct vdpa_mgmtdev_ops mdev_ops = {
+	.dev_add = mlx5_vdpa_dev_add,
+	.dev_del = mlx5_vdpa_dev_del,
+};
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_NET, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+static int mlx5v_probe(struct auxiliary_device *adev,
+		       const struct auxiliary_device_id *id)
+
+{
+	struct mlx5_adev *madev = container_of(adev, struct mlx5_adev, adev);
+	struct mlx5_core_dev *mdev = madev->mdev;
+	struct mlx5_vdpa_mgmtdev *mgtdev;
+	int err;
+
+	mgtdev = kzalloc(sizeof(*mgtdev), GFP_KERNEL);
+	if (!mgtdev)
+		return -ENOMEM;
+
+	mgtdev->mgtdev.ops = &mdev_ops;
+	mgtdev->mgtdev.device = mdev->device;
+	mgtdev->mgtdev.id_table = id_table;
+	mgtdev->madev = madev;
+
+	err = vdpa_mgmtdev_register(&mgtdev->mgtdev);
+	if (err)
+		goto reg_err;
+
+	dev_set_drvdata(&adev->dev, mgtdev);
+
+	return 0;
+
+reg_err:
+	kfree(mdev);
+	return err;
+}
+
 static void mlx5v_remove(struct auxiliary_device *adev)
 {
-	struct mlx5_vdpa_dev *mvdev = dev_get_drvdata(&adev->dev);
+	struct mlx5_vdpa_mgmtdev *mgtdev;
 
-	vdpa_unregister_device(&mvdev->vdev);
+	mgtdev = dev_get_drvdata(&adev->dev);
+	vdpa_mgmtdev_unregister(&mgtdev->mgtdev);
+	kfree(mgtdev);
 }
 
 static const struct auxiliary_device_id mlx5v_id_table[] = {
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 7/9] vdpa/mlx5: Provide device generated random MAC address

From: Eli Cohen <elic at nvidia.com>

Use a randomly generated MAC address to be applied in case it is not
configured by management tool.

The value queried through mlx5_query_nic_vport_mac_address() is not
relelavnt to vdpa since it is the mac that should be used by the regular
NIC driver.

Signed-off-by: Eli Cohen <elic at nvidia.com>
Reviewed-by: Parav Pandit <parav at nvidia.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index b67bba581dfd..ece2183e7b20 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -2005,10 +2005,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev
*v_mdev, const char *name)
 	if (err)
 		goto err_mtu;
 
-	err = mlx5_query_nic_vport_mac_address(mdev, 0, 0, config->mac);
-	if (err)
-		goto err_mtu;
-
+	eth_random_addr(config->mac);
 	mvdev->vdev.dma_dev = mdev->device;
 	err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
 	if (err)
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 8/9] vdpa/mlx5: Support configuration of MAC

From: Eli Cohen <elic at nvidia.com>

Add code to accept MAC configuration through vdpa tool. The MAC is
written into the config struct and later can be retrieved through
get_config().

Examples:
1. Configure MAC:
$ vdpa dev config set vdpa0 mac 00:11:22:33:44:55

2. Show configured params:
$ vdpa dev config show
vdpa0: mac 00:11:22:33:44:55 link down link_announce false mtu 0 speed 0 duplex
0

Signed-off-by: Eli Cohen <elic at nvidia.com>
Reviewed-by: Parav Pandit <parav at nvidia.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index ece2183e7b20..51a3fc4cde4d 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1972,6 +1972,22 @@ struct mlx5_vdpa_mgmtdev {
 	struct mlx5_vdpa_net *ndev;
 };
 
+static int mlx5_vdpa_net_dev_config_set(struct vdpa_mgmt_dev *v_mdev,
+					struct vdpa_device *vdev,
+					const struct vdpa_dev_config_set_attr *attrs)
+{
+	struct mlx5_vdpa_mgmtdev *mgtdev = container_of(v_mdev, struct
mlx5_vdpa_mgmtdev, mgtdev);
+	struct mlx5_vdpa_net *ndev = mgtdev->ndev;
+
+	if (attrs->mask.mtu_valid)
+		return -EOPNOTSUPP;
+
+	if (attrs->mask.mac_valid)
+		memcpy(ndev->config.mac, attrs->cfg.mac, ETH_ALEN);
+
+	return 0;
+}
+
 static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name)
 {
 	struct mlx5_vdpa_mgmtdev *mgtdev = container_of(v_mdev, struct
mlx5_vdpa_mgmtdev, mgtdev);
@@ -2044,6 +2060,7 @@ static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev
*v_mdev, struct vdpa_device *
 static const struct vdpa_mgmtdev_ops mdev_ops = {
 	.dev_add = mlx5_vdpa_dev_add,
 	.dev_del = mlx5_vdpa_dev_del,
+	.dev_config_set = mlx5_vdpa_net_dev_config_set,
 };
 
 static struct virtio_device_id id_table[] = {
-- 
2.26.2

Parav Pandit

2021-Feb-24 06:18 UTC

head link

[PATCH linux-next 9/9] vdpa/mlx5: Forward only packets with allowed MAC address

From: Eli Cohen <elic at nvidia.com>

Add rules to forward packets to the net device's TIR only if the
destination MAC is equal to the configured MAC. This is required to
prevent the netdevice from receiving traffic not destined to its
configured MAC.

Signed-off-by: Eli Cohen <elic at nvidia.com>
Reviewed-by: Parav Pandit <parav at nvidia.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 84 +++++++++++++++++++++++--------
 1 file changed, 64 insertions(+), 20 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 51a3fc4cde4d..9b580c67acda 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -147,7 +147,8 @@ struct mlx5_vdpa_net {
 	struct mutex reslock;
 	struct mlx5_flow_table *rxft;
 	struct mlx5_fc *rx_counter;
-	struct mlx5_flow_handle *rx_rule;
+	struct mlx5_flow_handle *rx_rule_ucast;
+	struct mlx5_flow_handle *rx_rule_mcast;
 	bool setup;
 	u16 mtu;
 };
@@ -1294,21 +1295,34 @@ static int add_fwd_to_tir(struct mlx5_vdpa_net *ndev)
 	struct mlx5_flow_table_attr ft_attr = {};
 	struct mlx5_flow_act flow_act = {};
 	struct mlx5_flow_namespace *ns;
+	struct mlx5_flow_spec *spec;
+	void *headers_c;
+	void *headers_v;
+	u8 *dmac_c;
+	u8 *dmac_v;
 	int err;
 
-	/* for now, one entry, match all, forward to tir */
-	ft_attr.max_fte = 1;
-	ft_attr.autogroup.max_num_groups = 1;
+	spec = kvzalloc(sizeof(*spec), GFP_KERNEL);
+	if (!spec)
+		return -ENOMEM;
+
+	spec->match_criteria_enable = MLX5_MATCH_OUTER_HEADERS;
+	ft_attr.max_fte = 2;
+	ft_attr.autogroup.max_num_groups = 2;
 
-	ns = mlx5_get_flow_namespace(ndev->mvdev.mdev, MLX5_FLOW_NAMESPACE_BYPASS);
+	ns = mlx5_get_flow_namespace(ndev->mvdev.mdev,
+				     MLX5_FLOW_NAMESPACE_BYPASS);
 	if (!ns) {
-		mlx5_vdpa_warn(&ndev->mvdev, "get flow namespace\n");
-		return -EOPNOTSUPP;
+		mlx5_vdpa_warn(&ndev->mvdev, "failed to get flow
namespace\n");
+		err = -EOPNOTSUPP;
+		goto err_ns;
 	}
 
 	ndev->rxft = mlx5_create_auto_grouped_flow_table(ns, &ft_attr);
-	if (IS_ERR(ndev->rxft))
-		return PTR_ERR(ndev->rxft);
+	if (IS_ERR(ndev->rxft)) {
+		err = PTR_ERR(ndev->rxft);
+		goto err_ns;
+	}
 
 	ndev->rx_counter = mlx5_fc_create(ndev->mvdev.mdev, false);
 	if (IS_ERR(ndev->rx_counter)) {
@@ -1316,37 +1330,67 @@ static int add_fwd_to_tir(struct mlx5_vdpa_net *ndev)
 		goto err_fc;
 	}
 
-	flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
MLX5_FLOW_CONTEXT_ACTION_COUNT;
+	headers_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
outer_headers);
+	dmac_c = MLX5_ADDR_OF(fte_match_param, headers_c, outer_headers.dmac_47_16);
+	memset(dmac_c, 0xff, ETH_ALEN);
+	headers_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
outer_headers);
+	dmac_v = MLX5_ADDR_OF(fte_match_param, headers_v, outer_headers.dmac_47_16);
+	ether_addr_copy(dmac_v, ndev->config.mac);
+
+	flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST |
+			  MLX5_FLOW_CONTEXT_ACTION_COUNT;
 	dest[0].type = MLX5_FLOW_DESTINATION_TYPE_TIR;
 	dest[0].tir_num = ndev->res.tirn;
 	dest[1].type = MLX5_FLOW_DESTINATION_TYPE_COUNTER;
 	dest[1].counter_id = mlx5_fc_id(ndev->rx_counter);
-	ndev->rx_rule = mlx5_add_flow_rules(ndev->rxft, NULL, &flow_act,
dest, 2);
-	if (IS_ERR(ndev->rx_rule)) {
-		err = PTR_ERR(ndev->rx_rule);
-		ndev->rx_rule = NULL;
-		goto err_rule;
+	ndev->rx_rule_ucast = mlx5_add_flow_rules(ndev->rxft, spec,
&flow_act,
+						  dest, 2);
+
+	if (IS_ERR(ndev->rx_rule_ucast)) {
+		err = PTR_ERR(ndev->rx_rule_ucast);
+		ndev->rx_rule_ucast = NULL;
+		goto err_rule_ucast;
+	}
+
+	memset(dmac_c, 0, ETH_ALEN);
+	memset(dmac_v, 0, ETH_ALEN);
+	dmac_c[0] = 1;
+	dmac_v[0] = 1;
+	flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
+	ndev->rx_rule_mcast = mlx5_add_flow_rules(ndev->rxft, spec,
&flow_act,
+						  dest, 1);
+	if (IS_ERR(ndev->rx_rule_mcast)) {
+		err = PTR_ERR(ndev->rx_rule_mcast);
+		ndev->rx_rule_mcast = NULL;
+		goto err_rule_mcast;
 	}
 
+	kvfree(spec);
 	return 0;
 
-err_rule:
+err_rule_mcast:
+	mlx5_del_flow_rules(ndev->rx_rule_ucast);
+	ndev->rx_rule_ucast = NULL;
+err_rule_ucast:
 	mlx5_fc_destroy(ndev->mvdev.mdev, ndev->rx_counter);
 err_fc:
 	mlx5_destroy_flow_table(ndev->rxft);
+err_ns:
+	kvfree(spec);
 	return err;
 }
 
 static void remove_fwd_to_tir(struct mlx5_vdpa_net *ndev)
 {
-	if (!ndev->rx_rule)
+	if (!ndev->rx_rule_ucast)
 		return;
 
-	mlx5_del_flow_rules(ndev->rx_rule);
+	mlx5_del_flow_rules(ndev->rx_rule_mcast);
+	ndev->rx_rule_mcast = NULL;
+	mlx5_del_flow_rules(ndev->rx_rule_ucast);
+	ndev->rx_rule_ucast = NULL;
 	mlx5_fc_destroy(ndev->mvdev.mdev, ndev->rx_counter);
 	mlx5_destroy_flow_table(ndev->rxft);
-
-	ndev->rx_rule = NULL;
 }
 
 static void mlx5_vdpa_kick_vq(struct vdpa_device *vdev, u16 idx)
-- 
2.26.2

Michael S. Tsirkin

2021-Feb-24 06:51 UTC

head link

[PATCH linux-next 0/9] vdpa: Enable user to set mac address,

On Wed, Feb 24, 2021 at 08:18:35AM +0200, Parav Pandit
wrote:> Currently user cannot set the mac address and mtu of the vdpa device.
> This patchset enables users to set the mac address and mtu of the vdpa
> device once the device is created.
> If a vendor driver supports such configuration user can set it otherwise
> user gets unsupported error.
> 
> vdpa mac address and mtu are device configuration layout fields.
> To keep interface generic enough for multiple types of vdpa devices, mac
> address and mtu setting is implemented as configuration layout config
> knobs.
> This enables to use similar config layout for other virtio devices.
> 
> An example of query & set of config layout fields for vdpa_sim_net
> driver:
> 
> Configuration layout fields are set after device is created.
> This enables user to change such fields at later point without destroying
and
> recreating the device for new config.
> 
> $ vdpa mgmtdev show
> vdpasim_net:
>   supported_classes net
> 
> Add the device:
> $ vdpa dev add name bar mgmtdev vdpasim_net
> 
> Configure mac address and mtu:
> $ vdpa dev config set bar mac 00:11:22:33:44:55 mtu 9000
> 
> In above command only mac address or only mtu can also be set.
> 
> View the config after setting:
> $ vdpa dev config show
> bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 speed 0
duplex 0
> 
> Patch summary:
> Patch-1 uses read only features bit to detect endianness
> Patch-2 implements new config layout query command
> Patch-3 implements callback for setting vdpa net config fields
> Patch-4 extends vdpa_sim_net driver to implement mac, mtu setting
> Patch-5 removed redundant get_config callback
> Patch-6 mlx5 vdpa driver migrates to user created vdpa device
> Patch-7 mlx5 vdpa driver uses random mac address when not configured
> Patch-8 mlx5 vdpa driver supports user provided mac config
> Patch-9 mlx5 vdpa driver uses user provided mac during rx flow steering
which tree is this for? does not seem to apply to linux-next branch of
vhost ...
> Eli Cohen (4):
>   vdpa/mlx5: Enable user to add/delete vdpa device
>   vdpa/mlx5: Provide device generated random MAC address
>   vdpa/mlx5: Support configuration of MAC
>   vdpa/mlx5: Forward only packets with allowed MAC address
> 
> Parav Pandit (5):
>   vdpa_sim: Consider read only supported features instead of current
>   vdpa: Introduce query of device config layout
>   vdpa: Enable user to set mac and mtu of vdpa device
>   vdpa_sim_net: Enable user to set mac address and mtu
>   vdpa_sim_net: Remove redundant get_config callback
> 
>  drivers/vdpa/mlx5/net/mlx5_vnet.c    | 185 ++++++++++++++----
>  drivers/vdpa/vdpa.c                  | 270 +++++++++++++++++++++++++++
>  drivers/vdpa/vdpa_sim/vdpa_sim.h     |   4 +-
>  drivers/vdpa/vdpa_sim/vdpa_sim_net.c |  49 +++--
>  include/linux/vdpa.h                 |  16 ++
>  include/uapi/linux/vdpa.h            |  12 ++
>  6 files changed, 476 insertions(+), 60 deletions(-)
> 
> -- 
> 2.26.2

Virtualization - Feb 2021 - [PATCH linux-next 0/9] vdpa: Enable user to set mac address,

[PATCH linux-next 0/9] vdpa: Enable user to set mac address,

[PATCH linux-next 1/9] vdpa_sim: Consider read only supported features instead of current

[PATCH linux-next 2/9] vdpa: Introduce query of device config layout

[PATCH linux-next 3/9] vdpa: Enable user to set mac and mtu of vdpa device

[PATCH linux-next 4/9] vdpa_sim_net: Enable user to set mac address and mtu

[PATCH linux-next 5/9] vdpa_sim_net: Remove redundant get_config callback

[PATCH linux-next 6/9] vdpa/mlx5: Enable user to add/delete vdpa device

[PATCH linux-next 7/9] vdpa/mlx5: Provide device generated random MAC address

[PATCH linux-next 8/9] vdpa/mlx5: Support configuration of MAC

[PATCH linux-next 9/9] vdpa/mlx5: Forward only packets with allowed MAC address

[PATCH linux-next 0/9] vdpa: Enable user to set mac address,