Virtualization - Jan 2018 - [PATCH v23 2/2] virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_VQ

This patch series is separated from the previous "Virtio-balloon
Enhancement" series. The new feature, VIRTIO_BALLOON_F_FREE_PAGE_VQ,  
implemented by this series enables the virtio-balloon driver to report
hints of guest free pages to the host. It can be used to accelerate live
migration of VMs. Here is an introduction of this usage:

Live migration needs to transfer the VM's memory from the source machine
to the destination round by round. For the 1st round, all the VM's memory
is transferred. From the 2nd round, only the pieces of memory that were
written by the guest (after the 1st round) are transferred. One method
that is popularly used by the hypervisor to track which part of memory is
written is to write-protect all the guest memory.

The second feature enables the optimization of the 1st round memory
transfer - the hypervisor can skip the transfer of guest free pages in the
1st round. It is not concerned that the memory pages are used after they
are given to the hypervisor as a hint of the free pages, because they will
be tracked by the hypervisor and transferred in the next round if they are
used and written.

ChangeLog:
v22->v23:
    - change to kick the device when the vq is half-way full;
    - open-code batch_free_page_sg into add_one_sg;
    - change cmd_id from "uint32_t" to "__virtio32";
    - reserver one entry in the vq for teh driver to send cmd_id, instead
      of busywaiting for an available entry;
    - add "stop_update" check before queue_work for prudence purpose
for
      now, will have a separate patch to discuss this flag check later;
    - init_vqs: change to put some variables on stack to have simpler
      implementation;
    - add destroy_workqueue(vb->balloon_wq);

v21->v22:
    - add_one_sg: some code and comment re-arrangement
    - send_cmd_id: handle a cornercase

For previous ChangeLog, please reference
https://lwn.net/Articles/743660/

Wei Wang (2):
  mm: support reporting free page blocks
  virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_VQ

 drivers/virtio/virtio_balloon.c     | 228 ++++++++++++++++++++++++++++++------
 include/linux/mm.h                  |   6 +
 include/uapi/linux/virtio_balloon.h |   6 +
 mm/page_alloc.c                     |  91 ++++++++++++++
 4 files changed, 298 insertions(+), 33 deletions(-)

-- 
2.7.4

This patch adds support to walk through the free page blocks in the
system and report them via a callback function. Some page blocks may
leave the free list after zone->lock is released, so it is the caller's
responsibility to either detect or prevent the use of such pages.

One use example of this patch is to accelerate live migration by skipping
the transfer of free pages reported from the guest. A popular method used
by the hypervisor to track which part of memory is written during live
migration is to write-protect all the guest memory. So, those pages that
are reported as free pages but are written after the report function
returns will be captured by the hypervisor, and they will be added to the
next round of memory transfer.

Signed-off-by: Wei Wang <wei.w.wang at intel.com>
Signed-off-by: Liang Li <liang.z.li at intel.com>
Cc: Michal Hocko <mhocko at kernel.org>
Cc: Michael S. Tsirkin <mst at redhat.com>
Acked-by: Michal Hocko <mhocko at kernel.org>
---
 include/linux/mm.h |  6 ++++
 mm/page_alloc.c    | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 97 insertions(+)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index ea818ff..b3077dd 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1938,6 +1938,12 @@ extern void free_area_init_node(int nid, unsigned long *
zones_size,
 		unsigned long zone_start_pfn, unsigned long *zholes_size);
 extern void free_initmem(void);
 
+extern void walk_free_mem_block(void *opaque,
+				int min_order,
+				bool (*report_pfn_range)(void *opaque,
+							 unsigned long pfn,
+							 unsigned long num));
+
 /*
  * Free reserved pages within range [PAGE_ALIGN(start), end & PAGE_MASK)
  * into the buddy system. The freed pages will be poisoned with pattern
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 76c9688..705de22 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4899,6 +4899,97 @@ void show_free_areas(unsigned int filter, nodemask_t
*nodemask)
 	show_swap_cache_info();
 }
 
+/*
+ * Walk through a free page list and report the found pfn range via the
+ * callback.
+ *
+ * Return false if the callback requests to stop reporting. Otherwise,
+ * return true.
+ */
+static bool walk_free_page_list(void *opaque,
+				struct zone *zone,
+				int order,
+				enum migratetype mt,
+				bool (*report_pfn_range)(void *,
+							 unsigned long,
+							 unsigned long))
+{
+	struct page *page;
+	struct list_head *list;
+	unsigned long pfn, flags;
+	bool ret;
+
+	spin_lock_irqsave(&zone->lock, flags);
+	list = &zone->free_area[order].free_list[mt];
+	list_for_each_entry(page, list, lru) {
+		pfn = page_to_pfn(page);
+		ret = report_pfn_range(opaque, pfn, 1 << order);
+		if (!ret)
+			break;
+	}
+	spin_unlock_irqrestore(&zone->lock, flags);
+
+	return ret;
+}
+
+/**
+ * walk_free_mem_block - Walk through the free page blocks in the system
+ * @opaque: the context passed from the caller
+ * @min_order: the minimum order of free lists to check
+ * @report_pfn_range: the callback to report the pfn range of the free pages
+ *
+ * If the callback returns false, stop iterating the list of free page blocks.
+ * Otherwise, continue to report.
+ *
+ * Please note that there are no locking guarantees for the callback and
+ * that the reported pfn range might be freed or disappear after the
+ * callback returns so the caller has to be very careful how it is used.
+ *
+ * The callback itself must not sleep or perform any operations which would
+ * require any memory allocations directly (not even GFP_NOWAIT/GFP_ATOMIC)
+ * or via any lock dependency. It is generally advisable to implement
+ * the callback as simple as possible and defer any heavy lifting to a
+ * different context.
+ *
+ * There is no guarantee that each free range will be reported only once
+ * during one walk_free_mem_block invocation.
+ *
+ * pfn_to_page on the given range is strongly discouraged and if there is
+ * an absolute need for that make sure to contact MM people to discuss
+ * potential problems.
+ *
+ * The function itself might sleep so it cannot be called from atomic
+ * contexts.
+ *
+ * In general low orders tend to be very volatile and so it makes more
+ * sense to query larger ones first for various optimizations which like
+ * ballooning etc... This will reduce the overhead as well.
+ */
+void walk_free_mem_block(void *opaque,
+			 int min_order,
+			 bool (*report_pfn_range)(void *opaque,
+						  unsigned long pfn,
+						  unsigned long num))
+{
+	struct zone *zone;
+	int order;
+	enum migratetype mt;
+	bool ret;
+
+	for_each_populated_zone(zone) {
+		for (order = MAX_ORDER - 1; order >= min_order; order--) {
+			for (mt = 0; mt < MIGRATE_TYPES; mt++) {
+				ret = walk_free_page_list(opaque, zone,
+							  order, mt,
+							  report_pfn_range);
+				if (!ret)
+					return;
+			}
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(walk_free_mem_block);
+
 static void zoneref_set_zone(struct zone *zone, struct zoneref *zoneref)
 {
 	zoneref->zone = zone;
-- 
2.7.4

Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_VQ feature indicates the
support of reporting hints of guest free pages to host via virtio-balloon.

Host requests the guest to report free pages by sending a new cmd
id to the guest via the free_page_report_cmd_id configuration register.

When the guest starts to report, the first element added to the free page
vq is the cmd id given by host. When the guest finishes the reporting
of all the free pages, VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID is added
to the vq to tell host that the reporting is done. Host may also requests
the guest to stop the reporting in advance by sending the stop cmd id to
the guest via the configuration register.

Signed-off-by: Wei Wang <wei.w.wang at intel.com>
Signed-off-by: Liang Li <liang.z.li at intel.com>
Cc: Michael S. Tsirkin <mst at redhat.com>
Cc: Michal Hocko <mhocko at kernel.org>
---
 drivers/virtio/virtio_balloon.c     | 228 ++++++++++++++++++++++++++++++------
 include/uapi/linux/virtio_balloon.h |   6 +
 2 files changed, 201 insertions(+), 33 deletions(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index a1fb52c..d038f4a 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -51,9 +51,21 @@ MODULE_PARM_DESC(oom_pages, "pages to free on
OOM");
 static struct vfsmount *balloon_mnt;
 #endif
 
+/* The number of virtqueues supported by virtio-balloon */
+#define VIRTIO_BALLOON_VQ_NUM		4
+#define VIRTIO_BALLOON_VQ_ID_INFLATE	0
+#define VIRTIO_BALLOON_VQ_ID_DEFLATE	1
+#define VIRTIO_BALLOON_VQ_ID_STATS	2
+#define VIRTIO_BALLOON_VQ_ID_FREE_PAGE	3
+
 struct virtio_balloon {
 	struct virtio_device *vdev;
-	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
+	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq, *free_page_vq;
+
+	/* Balloon's own wq for cpu-intensive work items */
+	struct workqueue_struct *balloon_wq;
+	/* The free page reporting work item submitted to the balloon wq */
+	struct work_struct report_free_page_work;
 
 	/* The balloon servicing is delegated to a freezable workqueue. */
 	struct work_struct update_balloon_stats_work;
@@ -63,6 +75,13 @@ struct virtio_balloon {
 	spinlock_t stop_update_lock;
 	bool stop_update;
 
+	/* Start to report free pages */
+	bool report_free_page;
+	/* Stores the cmd id given by host to start the free page reporting */
+	__virtio32 start_cmd_id;
+	/* Stores STOP_ID as a sign to tell host that the reporting is done */
+	__virtio32 stop_cmd_id;
+
 	/* Waiting for host to ack the pages we released. */
 	wait_queue_head_t acked;
 
@@ -281,6 +300,56 @@ static unsigned int update_balloon_stats(struct
virtio_balloon *vb)
 	return idx;
 }
 
+static void add_one_sg(struct virtqueue *vq, unsigned long pfn, uint32_t len)
+{
+	struct scatterlist sg;
+	unsigned int unused;
+	int err;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, pfn_to_page(pfn), len, 0);
+
+	/* Detach all the used buffers from the vq */
+	while (virtqueue_get_buf(vq, &unused))
+		;
+
+	/*
+	 * Since this is an optimization feature, losing a couple of free
+	 * pages to report isn't important. We simply return without adding
+	 * the page if the vq is full.
+	 * We are adding one entry each time, which essentially results in no
+	 * memory allocation, so the GFP_KERNEL flag below can be ignored.
+	 * There is always one entry reserved for the cmd id to use.
+	 */
+	if (vq->num_free > 1) {
+		err = virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
+		/*
+		 * This is expected to never fail, because there is always an
+		 * entry available on the vq.
+		 */
+		BUG_ON(err);
+	}
+
+	if (vq->num_free == virtqueue_get_vring_size(vq) / 2)
+		virtqueue_kick(vq);
+}
+
+static void send_cmd_id(struct virtqueue *vq, __virtio32 *cmd_id)
+{
+	struct scatterlist sg;
+	int err;
+
+	sg_init_one(&sg, cmd_id, sizeof(*cmd_id));
+
+	err = virtqueue_add_outbuf(vq, &sg, 1, vq, GFP_KERNEL);
+	/*
+	 * This is expected to never fail, because there is always an
+	 * entry reserved for the cmd id.
+	 */
+	BUG_ON(err);
+	virtqueue_kick(vq);
+}
+
 /*
  * While most virtqueues communicate guest-initiated requests to the
hypervisor,
  * the stats queue operates in reverse.  The driver initializes the virtqueue
@@ -316,17 +385,6 @@ static void stats_handle_request(struct virtio_balloon *vb)
 	virtqueue_kick(vq);
 }
 
-static void virtballoon_changed(struct virtio_device *vdev)
-{
-	struct virtio_balloon *vb = vdev->priv;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vb->stop_update_lock, flags);
-	if (!vb->stop_update)
-		queue_work(system_freezable_wq, &vb->update_balloon_size_work);
-	spin_unlock_irqrestore(&vb->stop_update_lock, flags);
-}
-
 static inline s64 towards_target(struct virtio_balloon *vb)
 {
 	s64 target;
@@ -343,6 +401,42 @@ static inline s64 towards_target(struct virtio_balloon *vb)
 	return target - vb->num_pages;
 }
 
+static void virtballoon_changed(struct virtio_device *vdev)
+{
+	struct virtio_balloon *vb = vdev->priv;
+	unsigned long flags;
+	__u32 cmd_id;
+	s64 diff = towards_target(vb);
+
+	if (diff) {
+		spin_lock_irqsave(&vb->stop_update_lock, flags);
+		if (!vb->stop_update)
+			queue_work(system_freezable_wq,
+				   &vb->update_balloon_size_work);
+		spin_unlock_irqrestore(&vb->stop_update_lock, flags);
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
+		virtio_cread(vdev, struct virtio_balloon_config,
+			     free_page_report_cmd_id, &cmd_id);
+		if (cmd_id == VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID) {
+			vb->report_free_page = false;
+		} else if (cmd_id != virtio32_to_cpu(vdev, vb->start_cmd_id)) {
+			/*
+			 * Host requests to start the reporting by sending a
+			 * new cmd id.
+			 */
+			vb->report_free_page = true;
+			vb->start_cmd_id = cpu_to_virtio32(vdev, cmd_id);
+			spin_lock_irqsave(&vb->stop_update_lock, flags);
+			if (!vb->stop_update)
+				queue_work(vb->balloon_wq,
+					   &vb->report_free_page_work);
+			spin_unlock_irqrestore(&vb->stop_update_lock, flags);
+		}
+	}
+}
+
 static void update_balloon_size(struct virtio_balloon *vb)
 {
 	u32 actual = vb->num_pages;
@@ -417,42 +511,91 @@ static void update_balloon_size_func(struct work_struct
*work)
 
 static int init_vqs(struct virtio_balloon *vb)
 {
-	struct virtqueue *vqs[3];
-	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
-	static const char * const names[] = { "inflate",
"deflate", "stats" };
-	int err, nvqs;
+	struct virtqueue *vqs[VIRTIO_BALLOON_VQ_NUM];
+	vq_callback_t *callbacks[VIRTIO_BALLOON_VQ_NUM];
+	const char *names[VIRTIO_BALLOON_VQ_NUM];
+	struct scatterlist sg;
+	int ret;
 
 	/*
-	 * We expect two virtqueues: inflate and deflate, and
-	 * optionally stat.
+	 * Inflateq and deflateq are used unconditionally. stats_vq and
+	 * free_page_vq uses names[2] and names[3], respectively. The names[]
+	 * will be NULL if the related feature is not enabled, which will
+	 * cause no allocation for the corresponding virtqueue in find_vqs.
 	 */
-	nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 : 2;
-	err = virtio_find_vqs(vb->vdev, nvqs, vqs, callbacks, names, NULL);
-	if (err)
-		return err;
+	callbacks[VIRTIO_BALLOON_VQ_ID_INFLATE] = balloon_ack;
+	names[VIRTIO_BALLOON_VQ_ID_INFLATE] = "inflate";
+	callbacks[VIRTIO_BALLOON_VQ_ID_DEFLATE] = balloon_ack;
+	names[VIRTIO_BALLOON_VQ_ID_DEFLATE] = "deflate";
+	names[VIRTIO_BALLOON_VQ_ID_STATS] = NULL;
+	names[VIRTIO_BALLOON_VQ_ID_FREE_PAGE] = NULL;
 
-	vb->inflate_vq = vqs[0];
-	vb->deflate_vq = vqs[1];
 	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
-		struct scatterlist sg;
-		unsigned int num_stats;
-		vb->stats_vq = vqs[2];
+		names[VIRTIO_BALLOON_VQ_ID_STATS] = "stats";
+		callbacks[VIRTIO_BALLOON_VQ_ID_STATS] = stats_request;
+	}
+
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
+		names[VIRTIO_BALLOON_VQ_ID_FREE_PAGE] = "free_page_vq";
+		callbacks[VIRTIO_BALLOON_VQ_ID_FREE_PAGE] = NULL;
+	}
+
+	ret = vb->vdev->config->find_vqs(vb->vdev, VIRTIO_BALLOON_VQ_NUM,
+					 vqs, callbacks, names, NULL, NULL);
+	if (ret)
+		return ret;
 
+	vb->inflate_vq = vqs[VIRTIO_BALLOON_VQ_ID_INFLATE];
+	vb->deflate_vq = vqs[VIRTIO_BALLOON_VQ_ID_DEFLATE];
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
+		vb->stats_vq = vqs[VIRTIO_BALLOON_VQ_ID_STATS];
 		/*
 		 * Prime this virtqueue with one buffer so the hypervisor can
 		 * use it to signal us later (it can't be broken yet!).
 		 */
-		num_stats = update_balloon_stats(vb);
-
-		sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
-		if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
-		    < 0)
-			BUG();
+		sg_init_one(&sg, vb->stats, sizeof(vb->stats));
+		ret = virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb,
+					   GFP_KERNEL);
+		if (ret) {
+			dev_warn(&vb->vdev->dev, "%s: add stat_vq failed\n",
+				 __func__);
+			return ret;
+		}
 		virtqueue_kick(vb->stats_vq);
 	}
+
+	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ))
+		vb->free_page_vq = vqs[VIRTIO_BALLOON_VQ_ID_FREE_PAGE];
+
 	return 0;
 }
 
+static bool virtio_balloon_send_free_pages(void *opaque, unsigned long pfn,
+					   unsigned long nr_pages)
+{
+	struct virtio_balloon *vb = (struct virtio_balloon *)opaque;
+	uint32_t len = nr_pages << PAGE_SHIFT;
+
+	if (!vb->report_free_page)
+		return false;
+
+	add_one_sg(vb->free_page_vq, pfn, len);
+
+	return true;
+}
+
+static void report_free_page_func(struct work_struct *work)
+{
+	struct virtio_balloon *vb;
+
+	vb = container_of(work, struct virtio_balloon, report_free_page_work);
+	/* Start by sending the obtained cmd id to the host with an outbuf */
+	send_cmd_id(vb->free_page_vq, &vb->start_cmd_id);
+	walk_free_mem_block(vb, 0, &virtio_balloon_send_free_pages);
+	/* End by sending the stop id to the host with an outbuf */
+	send_cmd_id(vb->free_page_vq, &vb->stop_cmd_id);
+}
+
 #ifdef CONFIG_BALLOON_COMPACTION
 /*
  * virtballoon_migratepage - perform the balloon page migration on behalf of
@@ -537,6 +680,7 @@ static struct file_system_type balloon_fs = {
 static int virtballoon_probe(struct virtio_device *vdev)
 {
 	struct virtio_balloon *vb;
+	__u32 poison_val;
 	int err;
 
 	if (!vdev->config->get) {
@@ -566,6 +710,21 @@ static int virtballoon_probe(struct virtio_device *vdev)
 	if (err)
 		goto out_free_vb;
 
+	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
+		vb->balloon_wq = alloc_workqueue("balloon-wq",
+					WQ_FREEZABLE | WQ_CPU_INTENSIVE, 0);
+		INIT_WORK(&vb->report_free_page_work, report_free_page_func);
+		vb->stop_cmd_id = cpu_to_virtio32(vdev,
+				VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID);
+		if (IS_ENABLED(CONFIG_PAGE_POISONING_NO_SANITY) ||
+		    !page_poisoning_enabled())
+			poison_val = 0;
+		else
+			poison_val = PAGE_POISON;
+		virtio_cwrite(vb->vdev, struct virtio_balloon_config,
+			      poison_val, &poison_val);
+	}
+
 	vb->nb.notifier_call = virtballoon_oom_notify;
 	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
 	err = register_oom_notifier(&vb->nb);
@@ -630,6 +789,8 @@ static void virtballoon_remove(struct virtio_device *vdev)
 	spin_unlock_irq(&vb->stop_update_lock);
 	cancel_work_sync(&vb->update_balloon_size_work);
 	cancel_work_sync(&vb->update_balloon_stats_work);
+	cancel_work_sync(&vb->report_free_page_work);
+	destroy_workqueue(vb->balloon_wq);
 
 	remove_common(vb);
 #ifdef CONFIG_BALLOON_COMPACTION
@@ -682,6 +843,7 @@ static unsigned int features[] = {
 	VIRTIO_BALLOON_F_MUST_TELL_HOST,
 	VIRTIO_BALLOON_F_STATS_VQ,
 	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
+	VIRTIO_BALLOON_F_FREE_PAGE_VQ,
 };
 
 static struct virtio_driver virtio_balloon_driver = {
diff --git a/include/uapi/linux/virtio_balloon.h
b/include/uapi/linux/virtio_balloon.h
index 343d7dd..5861876 100644
--- a/include/uapi/linux/virtio_balloon.h
+++ b/include/uapi/linux/virtio_balloon.h
@@ -34,15 +34,21 @@
 #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
 #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
 #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
+#define VIRTIO_BALLOON_F_FREE_PAGE_VQ	3 /* VQ to report free pages */
 
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
 
+#define VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID		0
 struct virtio_balloon_config {
 	/* Number of pages host wants Guest to give up. */
 	__u32 num_pages;
 	/* Number of pages we've actually got in balloon. */
 	__u32 actual;
+	/* Free page report command id, readonly by guest */
+	__u32 free_page_report_cmd_id;
+	/* Stores PAGE_POISON if page poisoning with sanity check is in use */
+	__u32 poison_val;
 };
 
 #define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
-- 
2.7.4

On Wed, Jan 24, 2018 at 10:50:27AM +0800, Wei Wang
wrote:
> Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_VQ feature indicates the
> support of reporting hints of guest free pages to host via virtio-balloon.
> 
> Host requests the guest to report free pages by sending a new cmd
> id to the guest via the free_page_report_cmd_id configuration register.
> 
> When the guest starts to report, the first element added to the free page
> vq is the cmd id given by host. When the guest finishes the reporting
> of all the free pages, VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID is added
> to the vq to tell host that the reporting is done. Host may also requests
> the guest to stop the reporting in advance by sending the stop cmd id to
> the guest via the configuration register.
> 
> Signed-off-by: Wei Wang <wei.w.wang at intel.com>
> Signed-off-by: Liang Li <liang.z.li at intel.com>
> Cc: Michael S. Tsirkin <mst at redhat.com>
> Cc: Michal Hocko <mhocko at kernel.org>
> ---
>  drivers/virtio/virtio_balloon.c     | 228
++++++++++++++++++++++++++++++------
>  include/uapi/linux/virtio_balloon.h |   6 +
>  2 files changed, 201 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c
b/drivers/virtio/virtio_balloon.c
> index a1fb52c..d038f4a 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -51,9 +51,21 @@ MODULE_PARM_DESC(oom_pages, "pages to free on
OOM");
>  static struct vfsmount *balloon_mnt;
>  #endif
>  
> +/* The number of virtqueues supported by virtio-balloon */
> +#define VIRTIO_BALLOON_VQ_NUM		4
> +#define VIRTIO_BALLOON_VQ_ID_INFLATE	0
> +#define VIRTIO_BALLOON_VQ_ID_DEFLATE	1
> +#define VIRTIO_BALLOON_VQ_ID_STATS	2
> +#define VIRTIO_BALLOON_VQ_ID_FREE_PAGE	3
> +
>  struct virtio_balloon {
>  	struct virtio_device *vdev;
> -	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
> +	struct virtqueue *inflate_vq, *deflate_vq, *stats_vq, *free_page_vq;
> +
> +	/* Balloon's own wq for cpu-intensive work items */
> +	struct workqueue_struct *balloon_wq;
> +	/* The free page reporting work item submitted to the balloon wq */
> +	struct work_struct report_free_page_work;
>  
>  	/* The balloon servicing is delegated to a freezable workqueue. */
>  	struct work_struct update_balloon_stats_work;
> @@ -63,6 +75,13 @@ struct virtio_balloon {
>  	spinlock_t stop_update_lock;
>  	bool stop_update;
>  
> +	/* Start to report free pages */
> +	bool report_free_page;
> +	/* Stores the cmd id given by host to start the free page reporting */
> +	__virtio32 start_cmd_id;
> +	/* Stores STOP_ID as a sign to tell host that the reporting is done */
> +	__virtio32 stop_cmd_id;
> +
>  	/* Waiting for host to ack the pages we released. */
>  	wait_queue_head_t acked;
>  
> @@ -281,6 +300,56 @@ static unsigned int update_balloon_stats(struct
virtio_balloon *vb)
>  	return idx;
>  }
>  
> +static void add_one_sg(struct virtqueue *vq, unsigned long pfn, uint32_t
len)
> +{
> +	struct scatterlist sg;
> +	unsigned int unused;
> +	int err;
> +
> +	sg_init_table(&sg, 1);
> +	sg_set_page(&sg, pfn_to_page(pfn), len, 0);
> +
> +	/* Detach all the used buffers from the vq */
> +	while (virtqueue_get_buf(vq, &unused))
> +		;
> +
> +	/*
> +	 * Since this is an optimization feature, losing a couple of free
> +	 * pages to report isn't important. We simply return without adding
> +	 * the page if the vq is full.
> +	 * We are adding one entry each time, which essentially results in no
> +	 * memory allocation, so the GFP_KERNEL flag below can be ignored.
> +	 * There is always one entry reserved for the cmd id to use.
> +	 */
> +	if (vq->num_free > 1) {
> +		err = virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
> +		/*
> +		 * This is expected to never fail, because there is always an
> +		 * entry available on the vq.
> +		 */
> +		BUG_ON(err);
> +	}
> +
> +	if (vq->num_free == virtqueue_get_vring_size(vq) / 2)
> +		virtqueue_kick(vq);
This will not DTRT in all cases. It's quite possible
that host does not need the kick when ring is half full but
does need it later when ring is full.
You can kick at ring half full as optimization but you absolutely
still must kick on ring full. Something like:

if (vq->num_free == virtqueue_get_vring_size(vq) / 2 ||
	vq->num_free <= 2)
> +}
> +
> +static void send_cmd_id(struct virtqueue *vq, __virtio32 *cmd_id)
> +{
> +	struct scatterlist sg;
> +	int err;
> +
> +	sg_init_one(&sg, cmd_id, sizeof(*cmd_id));
> +
> +	err = virtqueue_add_outbuf(vq, &sg, 1, vq, GFP_KERNEL);
> +	/*
> +	 * This is expected to never fail, because there is always an
> +	 * entry reserved for the cmd id.
> +	 */
> +	BUG_ON(err);
> +	virtqueue_kick(vq);
Actually add can fail if device becomes broken. I'd like to see us
bail out gracefully rather than BUG_ON.
> +}
> +
>  /*
>   * While most virtqueues communicate guest-initiated requests to the
hypervisor,
>   * the stats queue operates in reverse.  The driver initializes the
virtqueue
> @@ -316,17 +385,6 @@ static void stats_handle_request(struct virtio_balloon
*vb)
>  	virtqueue_kick(vq);
>  }
>  
> -static void virtballoon_changed(struct virtio_device *vdev)
> -{
> -	struct virtio_balloon *vb = vdev->priv;
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&vb->stop_update_lock, flags);
> -	if (!vb->stop_update)
> -		queue_work(system_freezable_wq, &vb->update_balloon_size_work);
> -	spin_unlock_irqrestore(&vb->stop_update_lock, flags);
> -}
> -
>  static inline s64 towards_target(struct virtio_balloon *vb)
>  {
>  	s64 target;
> @@ -343,6 +401,42 @@ static inline s64 towards_target(struct virtio_balloon
*vb)
>  	return target - vb->num_pages;
>  }
>  
> +static void virtballoon_changed(struct virtio_device *vdev)
> +{
> +	struct virtio_balloon *vb = vdev->priv;
> +	unsigned long flags;
> +	__u32 cmd_id;
> +	s64 diff = towards_target(vb);
> +
> +	if (diff) {
> +		spin_lock_irqsave(&vb->stop_update_lock, flags);
> +		if (!vb->stop_update)
> +			queue_work(system_freezable_wq,
> +				   &vb->update_balloon_size_work);
> +		spin_unlock_irqrestore(&vb->stop_update_lock, flags);
> +	}
> +
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
> +		virtio_cread(vdev, struct virtio_balloon_config,
> +			     free_page_report_cmd_id, &cmd_id);
> +		if (cmd_id == VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID) {
> +			vb->report_free_page = false;
> +		} else if (cmd_id != virtio32_to_cpu(vdev, vb->start_cmd_id)) {
> +			/*
> +			 * Host requests to start the reporting by sending a
> +			 * new cmd id.
> +			 */
> +			vb->report_free_page = true;
> +			vb->start_cmd_id = cpu_to_virtio32(vdev, cmd_id);
> +			spin_lock_irqsave(&vb->stop_update_lock, flags);
> +			if (!vb->stop_update)
> +				queue_work(vb->balloon_wq,
> +					   &vb->report_free_page_work);
> +			spin_unlock_irqrestore(&vb->stop_update_lock, flags);
> +		}
> +	}
> +}
> +
>  static void update_balloon_size(struct virtio_balloon *vb)
>  {
>  	u32 actual = vb->num_pages;
> @@ -417,42 +511,91 @@ static void update_balloon_size_func(struct
work_struct *work)
>  
>  static int init_vqs(struct virtio_balloon *vb)
>  {
> -	struct virtqueue *vqs[3];
> -	vq_callback_t *callbacks[] = { balloon_ack, balloon_ack, stats_request };
> -	static const char * const names[] = { "inflate",
"deflate", "stats" };
> -	int err, nvqs;
> +	struct virtqueue *vqs[VIRTIO_BALLOON_VQ_NUM];
> +	vq_callback_t *callbacks[VIRTIO_BALLOON_VQ_NUM];
> +	const char *names[VIRTIO_BALLOON_VQ_NUM];
> +	struct scatterlist sg;
> +	int ret;
>  
>  	/*
> -	 * We expect two virtqueues: inflate and deflate, and
> -	 * optionally stat.
> +	 * Inflateq and deflateq are used unconditionally. stats_vq and
> +	 * free_page_vq uses names[2] and names[3], respectively. The names[]
> +	 * will be NULL if the related feature is not enabled, which will
> +	 * cause no allocation for the corresponding virtqueue in find_vqs.
>  	 */
> -	nvqs = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ) ? 3 :
2;
> -	err = virtio_find_vqs(vb->vdev, nvqs, vqs, callbacks, names, NULL);
> -	if (err)
> -		return err;
> +	callbacks[VIRTIO_BALLOON_VQ_ID_INFLATE] = balloon_ack;
> +	names[VIRTIO_BALLOON_VQ_ID_INFLATE] = "inflate";
> +	callbacks[VIRTIO_BALLOON_VQ_ID_DEFLATE] = balloon_ack;
> +	names[VIRTIO_BALLOON_VQ_ID_DEFLATE] = "deflate";
> +	names[VIRTIO_BALLOON_VQ_ID_STATS] = NULL;
> +	names[VIRTIO_BALLOON_VQ_ID_FREE_PAGE] = NULL;
>  
> -	vb->inflate_vq = vqs[0];
> -	vb->deflate_vq = vqs[1];
>  	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
> -		struct scatterlist sg;
> -		unsigned int num_stats;
> -		vb->stats_vq = vqs[2];
> +		names[VIRTIO_BALLOON_VQ_ID_STATS] = "stats";
> +		callbacks[VIRTIO_BALLOON_VQ_ID_STATS] = stats_request;
> +	}
> +
> +	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
> +		names[VIRTIO_BALLOON_VQ_ID_FREE_PAGE] = "free_page_vq";
> +		callbacks[VIRTIO_BALLOON_VQ_ID_FREE_PAGE] = NULL;
> +	}
> +
> +	ret = vb->vdev->config->find_vqs(vb->vdev,
VIRTIO_BALLOON_VQ_NUM,
> +					 vqs, callbacks, names, NULL, NULL);
> +	if (ret)
> +		return ret;
>  
> +	vb->inflate_vq = vqs[VIRTIO_BALLOON_VQ_ID_INFLATE];
> +	vb->deflate_vq = vqs[VIRTIO_BALLOON_VQ_ID_DEFLATE];
> +	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
> +		vb->stats_vq = vqs[VIRTIO_BALLOON_VQ_ID_STATS];
>  		/*
>  		 * Prime this virtqueue with one buffer so the hypervisor can
>  		 * use it to signal us later (it can't be broken yet!).
>  		 */
> -		num_stats = update_balloon_stats(vb);
> -
> -		sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
> -		if (virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb, GFP_KERNEL)
> -		    < 0)
> -			BUG();
> +		sg_init_one(&sg, vb->stats, sizeof(vb->stats));
> +		ret = virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb,
> +					   GFP_KERNEL);
> +		if (ret) {
> +			dev_warn(&vb->vdev->dev, "%s: add stat_vq
failed\n",
> +				 __func__);
> +			return ret;
> +		}
>  		virtqueue_kick(vb->stats_vq);
>  	}
> +
> +	if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ))
> +		vb->free_page_vq = vqs[VIRTIO_BALLOON_VQ_ID_FREE_PAGE];
> +
>  	return 0;
>  }
>  
> +static bool virtio_balloon_send_free_pages(void *opaque, unsigned long
pfn,
> +					   unsigned long nr_pages)
> +{
> +	struct virtio_balloon *vb = (struct virtio_balloon *)opaque;
> +	uint32_t len = nr_pages << PAGE_SHIFT;
> +
> +	if (!vb->report_free_page)
> +		return false;
> +
> +	add_one_sg(vb->free_page_vq, pfn, len);
> +
> +	return true;
> +}
> +
> +static void report_free_page_func(struct work_struct *work)
> +{
> +	struct virtio_balloon *vb;
> +
> +	vb = container_of(work, struct virtio_balloon, report_free_page_work);
> +	/* Start by sending the obtained cmd id to the host with an outbuf */
> +	send_cmd_id(vb->free_page_vq, &vb->start_cmd_id);
> +	walk_free_mem_block(vb, 0, &virtio_balloon_send_free_pages);
> +	/* End by sending the stop id to the host with an outbuf */
> +	send_cmd_id(vb->free_page_vq, &vb->stop_cmd_id);
> +}
> +
>  #ifdef CONFIG_BALLOON_COMPACTION
>  /*
>   * virtballoon_migratepage - perform the balloon page migration on behalf
of
> @@ -537,6 +680,7 @@ static struct file_system_type balloon_fs = {
>  static int virtballoon_probe(struct virtio_device *vdev)
>  {
>  	struct virtio_balloon *vb;
> +	__u32 poison_val;
>  	int err;
>  
>  	if (!vdev->config->get) {
> @@ -566,6 +710,21 @@ static int virtballoon_probe(struct virtio_device
*vdev)
>  	if (err)
>  		goto out_free_vb;
>  
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_VQ)) {
> +		vb->balloon_wq = alloc_workqueue("balloon-wq",
> +					WQ_FREEZABLE | WQ_CPU_INTENSIVE, 0);
why don't you check the return value here?
> +		INIT_WORK(&vb->report_free_page_work, report_free_page_func);
> +		vb->stop_cmd_id = cpu_to_virtio32(vdev,
> +				VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID);
> +		if (IS_ENABLED(CONFIG_PAGE_POISONING_NO_SANITY) ||
> +		    !page_poisoning_enabled())
> +			poison_val = 0;
> +		else
> +			poison_val = PAGE_POISON;
> +		virtio_cwrite(vb->vdev, struct virtio_balloon_config,
> +			      poison_val, &poison_val);
I think we should differentiate between 0 and not poison.
How about we use a separate feature bit for the poison flag?
> +	}
> +
>  	vb->nb.notifier_call = virtballoon_oom_notify;
>  	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
>  	err = register_oom_notifier(&vb->nb);
> @@ -630,6 +789,8 @@ static void virtballoon_remove(struct virtio_device
*vdev)
>  	spin_unlock_irq(&vb->stop_update_lock);
>  	cancel_work_sync(&vb->update_balloon_size_work);
>  	cancel_work_sync(&vb->update_balloon_stats_work);
> +	cancel_work_sync(&vb->report_free_page_work);
> +	destroy_workqueue(vb->balloon_wq);
>  
>  	remove_common(vb);
>  #ifdef CONFIG_BALLOON_COMPACTION
> @@ -682,6 +843,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_FREE_PAGE_VQ,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h
b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..5861876 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,15 +34,21 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages
*/
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_FREE_PAGE_VQ	3 /* VQ to report free pages */
I'd call it something like FREE_PAGE_HINT
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
>  
> +#define VIRTIO_BALLOON_FREE_PAGE_REPORT_STOP_ID		0
>  struct virtio_balloon_config {
>  	/* Number of pages host wants Guest to give up. */
>  	__u32 num_pages;
>  	/* Number of pages we've actually got in balloon. */
>  	__u32 actual;
> +	/* Free page report command id, readonly by guest */
> +	__u32 free_page_report_cmd_id;
> +	/* Stores PAGE_POISON if page poisoning with sanity check is in use */
> +	__u32 poison_val;
>  };
>  
>  #define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
> -- 
> 2.7.4