Vitaly Kuznetsov
2017-Feb-08 17:07 UTC
[PATCH RFC 0/2] x86/vdso: Add Hyper-V TSC page clocksource support
Hi, Hyper-V TSC page clocksource is suitable for vDSO, however, the protocol defined by the hypervisor is different from VCLOCK_PVCLOCK. I implemented the required support re-using pvclock_page VVAR. Simple sysbench test shows the following results: Before: # time sysbench --test=memory --max-requests=500000 run ... real 1m22.618s user 0m50.193s sys 0m32.268s After: # time sysbench --test=memory --max-requests=500000 run ... real 0m50.218s user 0m50.171s sys 0m0.016s So it seems it is worth it. What do you think? Vitaly Kuznetsov (2): hyperv: implement hv_get_tsc_page() x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method arch/x86/entry/vdso/vclock_gettime.c | 48 ++++++++++++++++++++++++++++++++++++ arch/x86/entry/vdso/vma.c | 26 +++++++++++++------ arch/x86/hyperv/hv_init.c | 8 ++++++ arch/x86/include/asm/clocksource.h | 3 ++- arch/x86/include/asm/mshyperv.h | 8 ++++++ drivers/hv/Kconfig | 5 ++++ 6 files changed, 90 insertions(+), 8 deletions(-) -- 2.9.3
Vitaly Kuznetsov
2017-Feb-08 17:07 UTC
[PATCH RFC 1/2] hyperv: implement hv_get_tsc_page()
To use Hyper-V TSC page clocksource from vDSO we need to make tsc_pg available. Implement hv_get_tsc_page() and add CONFIG_HYPERV_CLOCK to make #ifdef-s simple. Signed-off-by: Vitaly Kuznetsov <vkuznets at redhat.com> --- arch/x86/hyperv/hv_init.c | 5 +++++ arch/x86/include/asm/mshyperv.h | 8 ++++++++ drivers/hv/Kconfig | 5 +++++ 3 files changed, 18 insertions(+) diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index b371d0e..aa36049 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -31,6 +31,11 @@ static struct ms_hyperv_tsc_page *tsc_pg; +struct ms_hyperv_tsc_page *hv_get_tsc_page(void) +{ + return tsc_pg; +} + static u64 read_hv_clock_tsc(struct clocksource *arg) { u64 current_tick; diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index f8dc370..005d0bc 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -173,4 +173,12 @@ void hyperv_report_panic(struct pt_regs *regs); bool hv_is_hypercall_page_setup(void); void hyperv_cleanup(void); #endif +#ifdef CONFIG_HYPERV_CLOCK +struct ms_hyperv_tsc_page *hv_get_tsc_page(void); +#else +static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void) +{ + return NULL; +} +#endif #endif diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig index 0403b51..3b45e69 100644 --- a/drivers/hv/Kconfig +++ b/drivers/hv/Kconfig @@ -3,10 +3,15 @@ menu "Microsoft Hyper-V guest support" config HYPERV tristate "Microsoft Hyper-V client drivers" depends on X86 && ACPI && PCI && X86_LOCAL_APIC && HYPERVISOR_GUEST + select HYPERV_CLOCK help Select this option to run Linux as a Hyper-V client operating system. +config HYPERV_CLOCK + bool + depends on X86_64 + config HYPERV_UTILS tristate "Microsoft Hyper-V Utilities driver" depends on HYPERV && CONNECTOR && NLS -- 2.9.3
Vitaly Kuznetsov
2017-Feb-08 17:07 UTC
[PATCH RFC 2/2] x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
Hyper-V TSC page clocksource is suitable for vDSO, however, the protocol defined by the hypervisor is different from VCLOCK_PVCLOCK. Implement the required support re-using pvclock_page VVAR as VCLOCK_PVCLOCK is mutually exclusive with VCLOCK_HVCLOCK at run time. Signed-off-by: Vitaly Kuznetsov <vkuznets at redhat.com> --- arch/x86/entry/vdso/vclock_gettime.c | 48 ++++++++++++++++++++++++++++++++++++ arch/x86/entry/vdso/vma.c | 26 +++++++++++++------ arch/x86/hyperv/hv_init.c | 3 +++ arch/x86/include/asm/clocksource.h | 3 ++- 4 files changed, 72 insertions(+), 8 deletions(-) diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c index 9d4d6e1..93e9dcd 100644 --- a/arch/x86/entry/vdso/vclock_gettime.c +++ b/arch/x86/entry/vdso/vclock_gettime.c @@ -17,6 +17,7 @@ #include <asm/unistd.h> #include <asm/msr.h> #include <asm/pvclock.h> +#include <asm/mshyperv.h> #include <linux/math64.h> #include <linux/time.h> #include <linux/kernel.h> @@ -141,6 +142,49 @@ static notrace u64 vread_pvclock(int *mode) return last; } #endif +#ifdef CONFIG_HYPERV_CLOCK +/* (a * b) >> 64 implementation */ +static inline u64 mul64x64_hi(u64 a, u64 b) +{ + u64 a_lo, a_hi, b_lo, b_hi, p1, p2; + + a_lo = (u32)a; + a_hi = a >> 32; + b_lo = (u32)b; + b_hi = b >> 32; + p1 = a_lo * b_hi; + p2 = a_hi * b_lo; + + return a_hi * b_hi + (p1 >> 32) + (p2 >> 32) + + ((((a_lo * b_lo) >> 32) + (u32)p1 + (u32)p2) >> 32); + +} + +static notrace u64 vread_hvclock(int *mode) +{ + const struct ms_hyperv_tsc_page *tsc_pg + (const struct ms_hyperv_tsc_page *)&pvclock_page; + u64 sequence, scale, offset, current_tick, cur_tsc; + + while (1) { + sequence = READ_ONCE(tsc_pg->tsc_sequence); + if (!sequence) + break; + + scale = READ_ONCE(tsc_pg->tsc_scale); + offset = READ_ONCE(tsc_pg->tsc_offset); + rdtscll(cur_tsc); + + current_tick = mul64x64_hi(cur_tsc, scale) + offset; + + if (READ_ONCE(tsc_pg->tsc_sequence) == sequence) + return current_tick; + } + + *mode = VCLOCK_NONE; + return 0; +} +#endif notrace static u64 vread_tsc(void) { @@ -173,6 +217,10 @@ notrace static inline u64 vgetsns(int *mode) else if (gtod->vclock_mode == VCLOCK_PVCLOCK) cycles = vread_pvclock(mode); #endif +#ifdef CONFIG_HYPERV_CLOCK + else if (gtod->vclock_mode == VCLOCK_HVCLOCK) + cycles = vread_hvclock(mode); +#endif else return 0; v = (cycles - gtod->cycle_last) & gtod->mask; diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c index 10820f6..4b9d90c 100644 --- a/arch/x86/entry/vdso/vma.c +++ b/arch/x86/entry/vdso/vma.c @@ -21,6 +21,7 @@ #include <asm/page.h> #include <asm/desc.h> #include <asm/cpufeature.h> +#include <asm/mshyperv.h> #if defined(CONFIG_X86_64) unsigned int __read_mostly vdso64_enabled = 1; @@ -112,13 +113,24 @@ static int vvar_fault(const struct vm_special_mapping *sm, ret = vm_insert_pfn(vma, vmf->address, __pa_symbol(&__vvar_page) >> PAGE_SHIFT); } else if (sym_offset == image->sym_pvclock_page) { - struct pvclock_vsyscall_time_info *pvti - pvclock_pvti_cpu0_va(); - if (pvti && vclock_was_used(VCLOCK_PVCLOCK)) { - ret = vm_insert_pfn( - vma, - vmf->address, - __pa(pvti) >> PAGE_SHIFT); + if (vclock_was_used(VCLOCK_PVCLOCK)) { + struct pvclock_vsyscall_time_info *pvti + pvclock_pvti_cpu0_va(); + if (pvti) { + ret = vm_insert_pfn( + vma, + vmf->address, + __pa(pvti) >> PAGE_SHIFT); + } + } else if (vclock_was_used(VCLOCK_HVCLOCK)) { + struct ms_hyperv_tsc_page *tsc_pg + hv_get_tsc_page(); + if (tsc_pg) { + ret = vm_insert_pfn( + vma, + vmf->address, + vmalloc_to_pfn(tsc_pg)); + } } } diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index aa36049..3d534d2 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -157,6 +157,9 @@ void hyperv_init(void) tsc_msr.guest_physical_address = vmalloc_to_pfn(tsc_pg); wrmsrl(HV_X64_MSR_REFERENCE_TSC, tsc_msr.as_uint64); + + hyperv_cs_tsc.archdata.vclock_mode = VCLOCK_HVCLOCK; + clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100); return; } diff --git a/arch/x86/include/asm/clocksource.h b/arch/x86/include/asm/clocksource.h index eae33c7..47bea8c 100644 --- a/arch/x86/include/asm/clocksource.h +++ b/arch/x86/include/asm/clocksource.h @@ -6,7 +6,8 @@ #define VCLOCK_NONE 0 /* No vDSO clock available. */ #define VCLOCK_TSC 1 /* vDSO should use vread_tsc. */ #define VCLOCK_PVCLOCK 2 /* vDSO should use vread_pvclock. */ -#define VCLOCK_MAX 2 +#define VCLOCK_HVCLOCK 3 /* vDSO should use vread_hvclock. */ +#define VCLOCK_MAX 3 struct arch_clocksource_data { int vclock_mode; -- 2.9.3
Andy Lutomirski
2017-Feb-08 17:12 UTC
[PATCH RFC 2/2] x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
On Wed, Feb 8, 2017 at 9:07 AM, Vitaly Kuznetsov <vkuznets at redhat.com> wrote:> Hyper-V TSC page clocksource is suitable for vDSO, however, the protocol > defined by the hypervisor is different from VCLOCK_PVCLOCK. Implement the > required support re-using pvclock_page VVAR as VCLOCK_PVCLOCK is mutually > exclusive with VCLOCK_HVCLOCK at run time. > > Signed-off-by: Vitaly Kuznetsov <vkuznets at redhat.com> > --- > arch/x86/entry/vdso/vclock_gettime.c | 48 ++++++++++++++++++++++++++++++++++++ > arch/x86/entry/vdso/vma.c | 26 +++++++++++++------ > arch/x86/hyperv/hv_init.c | 3 +++ > arch/x86/include/asm/clocksource.h | 3 ++- > 4 files changed, 72 insertions(+), 8 deletions(-) > > diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c > index 9d4d6e1..93e9dcd 100644 > --- a/arch/x86/entry/vdso/vclock_gettime.c > +++ b/arch/x86/entry/vdso/vclock_gettime.c > @@ -17,6 +17,7 @@ > #include <asm/unistd.h> > #include <asm/msr.h> > #include <asm/pvclock.h> > +#include <asm/mshyperv.h> > #include <linux/math64.h> > #include <linux/time.h> > #include <linux/kernel.h> > @@ -141,6 +142,49 @@ static notrace u64 vread_pvclock(int *mode) > return last; > } > #endif > +#ifdef CONFIG_HYPERV_CLOCK > +/* (a * b) >> 64 implementation */ > +static inline u64 mul64x64_hi(u64 a, u64 b) > +{ > + u64 a_lo, a_hi, b_lo, b_hi, p1, p2; > + > + a_lo = (u32)a; > + a_hi = a >> 32; > + b_lo = (u32)b; > + b_hi = b >> 32; > + p1 = a_lo * b_hi; > + p2 = a_hi * b_lo; > + > + return a_hi * b_hi + (p1 >> 32) + (p2 >> 32) + > + ((((a_lo * b_lo) >> 32) + (u32)p1 + (u32)p2) >> 32); > + > +}Unless GCC is waaay more clever than I think, this is hugely suboptimal on 64-bit. x86 can do this in a single instruction, and gcc can express it cleanly using __uint128_t. I wouldn't be terribly surprised if the 32-bit generated code was fine, too.> + > +static notrace u64 vread_hvclock(int *mode) > +{ > + const struct ms_hyperv_tsc_page *tsc_pg > + (const struct ms_hyperv_tsc_page *)&pvclock_page; > + u64 sequence, scale, offset, current_tick, cur_tsc; > + > + while (1) { > + sequence = READ_ONCE(tsc_pg->tsc_sequence); > + if (!sequence) > + break; > + > + scale = READ_ONCE(tsc_pg->tsc_scale); > + offset = READ_ONCE(tsc_pg->tsc_offset); > + rdtscll(cur_tsc); > + > + current_tick = mul64x64_hi(cur_tsc, scale) + offset; > + > + if (READ_ONCE(tsc_pg->tsc_sequence) == sequence) > + return current_tick; > + }Can you explain better what's going on here? What protocol does the hypervisor use to update this bizarro seqlock? What exactly does sequence==0 mean?> + > + *mode = VCLOCK_NONE; > + return 0; > +} > +#endif > > notrace static u64 vread_tsc(void) > { > @@ -173,6 +217,10 @@ notrace static inline u64 vgetsns(int *mode) > else if (gtod->vclock_mode == VCLOCK_PVCLOCK) > cycles = vread_pvclock(mode); > #endif > +#ifdef CONFIG_HYPERV_CLOCK > + else if (gtod->vclock_mode == VCLOCK_HVCLOCK) > + cycles = vread_hvclock(mode); > +#endif > else > return 0; > v = (cycles - gtod->cycle_last) & gtod->mask; > diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c > index 10820f6..4b9d90c 100644 > --- a/arch/x86/entry/vdso/vma.c > +++ b/arch/x86/entry/vdso/vma.c > @@ -21,6 +21,7 @@ > #include <asm/page.h> > #include <asm/desc.h> > #include <asm/cpufeature.h> > +#include <asm/mshyperv.h> > > #if defined(CONFIG_X86_64) > unsigned int __read_mostly vdso64_enabled = 1; > @@ -112,13 +113,24 @@ static int vvar_fault(const struct vm_special_mapping *sm, > ret = vm_insert_pfn(vma, vmf->address, > __pa_symbol(&__vvar_page) >> PAGE_SHIFT); > } else if (sym_offset == image->sym_pvclock_page) { > - struct pvclock_vsyscall_time_info *pvti > - pvclock_pvti_cpu0_va(); > - if (pvti && vclock_was_used(VCLOCK_PVCLOCK)) { > - ret = vm_insert_pfn( > - vma, > - vmf->address, > - __pa(pvti) >> PAGE_SHIFT); > + if (vclock_was_used(VCLOCK_PVCLOCK)) { > + struct pvclock_vsyscall_time_info *pvti > + pvclock_pvti_cpu0_va(); > + if (pvti) { > + ret = vm_insert_pfn( > + vma, > + vmf->address, > + __pa(pvti) >> PAGE_SHIFT); > + } > + } else if (vclock_was_used(VCLOCK_HVCLOCK)) { > + struct ms_hyperv_tsc_page *tsc_pg > + hv_get_tsc_page(); > + if (tsc_pg) { > + ret = vm_insert_pfn( > + vma, > + vmf->address, > + vmalloc_to_pfn(tsc_pg)); > + }This is IMO just too weird and fragile. Why not allocate another page and avoid this strange aliasing? --Andy
Reasonably Related Threads
- [PATCH RFC 2/2] x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
- [PATCH RFC 0/2] x86/vdso: Add Hyper-V TSC page clocksource support
- [PATCH RFC 0/2] x86/vdso: Add Hyper-V TSC page clocksource support
- [PATCH RFC 2/2] x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
- [PATCH 01/10] bios/fan: add support for maxwell's fan management table v2