consistent) with the same results.
--
-Gene
> -----Original Message-----
> From: syslinux-bounces at zytor.com [mailto:syslinux-bounces at zytor.com]
On Behalf Of Alexander
> Sent: 9. september 2010 19:59
> To: ''For discussion of Syslinux and tftp-hpa''
> Subject: Re: [syslinux] ALTERNATE TFTP SERVERS
>
> I think I was able to closer to the error. After removing the IP I was able
> to get some more lines on the screen.
> So first of all, here the farest point, I got to.
>
> TFTP boot: 192.168.112.198 \Boot\x86\pxelinux.cfg\pxelinux.0
>
> PXELINUX 4.02 2010-07-21 [...]
> !PXE entry point found (we hope) at 9E1C:0104 via plan A
> UNDI code segment at 9E1c len 198C
> UNDI data segment at 9C99 len 1830
> Getting cached packet ?01 02 03
> My IP address seems to be C0A87038 192.168.112.56
> Ip=192.168.112.56:192.168.112.198:0.0.0.0:255.255.255.0
> BOOTIF=01-08-00-27-2d-f9-4d
> SYSUUID=[...]
> TFTP prefix: \Boot\x86\pxelinux.cfg\
> Trying to load pxelinux.cfg/[SYSUUID] ? _
>
>
> How far I get here, seems to depend on a randomly short time window.
> Once I even made it to the point, that he tried to load the vesamenu.c32
but
> I didn''t get any closer.
> On bad luck I will just get to the first line (TFTP boot...)
>
> Nearly the same result I get when trying to point to WDS
>
> TFTP boot: 192.168.112.198 \Boot\x86\wdsnbp.com
>
> Press F12 for network service boot
> _
>
> When I try to hit F12, the client is already freezed.
>
> So here is my default file:
> DEFAULT vesamenu.c32
> TIMEOUT 200
> PROMPT 0
> NOESCAPE 1
>
> MENU TITLE PXE Boot
>
> LABEL pxechangelinux
> MENU LABEL PXE Chain Linux
> COMBOOT pxechain.com
> APPEND 192.168.112.198::\Boot\x86\pxelinux.0
>
> LABEL pxechangewds
> MENU LABEL PXE Chain WDS
> COMBOOT pxechain.com
> APPEND 192.168.112.198::\Boot\x86\wdsnbp.com
>
>
>
> PXELinux and co are placed in %Systemroot%\Remoteinstall\Boot\x86
> The WDS Server runs DHCP too.
> WDS/DHCP/tftp-Server-ip: 192.168.112.198
>
> This is my test setup at home. At work I have the same setup but with a
> second wds/tftp-server only running the wds/tftp-role.
> At work it will even freeze earlier. There I''ll just get to the
first line
> (TFTP boot...) after selecting one of the pxechain entries.
> It doesn''t matter if I point to the first or second server.
>
> I even turned off the windows server firewall completely with no effect.
> Everything else is working fine with WDS and PXELinux.
>
> Alex
>
>
> -----Urspr?ngliche Nachricht-----
> Von: syslinux-bounces at zytor.com [mailto:syslinux-bounces at zytor.com]
Im
> Auftrag von Jeffrey Hutzelman
> Gesendet: Donnerstag, 9. September 2010 17:40
> An: For discussion of Syslinux and tftp-hpa
> Cc: jhutz at cmu.edu
> Betreff: Re: [syslinux] ALTERNATE TFTP SERVERS
>
> --On Wednesday, September 08, 2010 11:38:15 PM +0200 Alexander
> <erazoramg at freenet.de> wrote:
>
>> Hello there,
>>
>> I suceeded in setting up WDS with PXELinux.
>> Now I''m trying to point the primary tftp server with
pxechain.com to a
>> second tftp server. Actually it will just load the specified kernel,
which
>> is given through APPEND. After that the tftp client just freezes.
>> Do I need to start with another tftp? The actual used tftp (and DHCP)
>> server comes from Win2008 R2 Server.
>> (Using Syslinux 4.02 package)
>>
>> Any help would be appreciated.
>
> You haven''t told us anything about the configuration that leads to
the
> problem. ?Please send a copy of your PXELINUX config file along with a
> description of which server is which, where the files are, and exactly what
> happens when you try to chain to the second server (what output do you get?
> especially, what are the last lines before it freezes?).
>
> -- Jeffrey T. Hutzelman (N3NHS) <jhutz+ at cmu.edu>
> ? Carnegie Mellon University - Pittsburgh, PA