Hello all, I am having problems booting my board with a M-System DiskOnChip 2000 Module with Syslinux. I was able to format and write to the module, but when I try to boot it does not start. Find below the messages I am getting: BIOS Messages ============DOC Socket Services - Version 0.2 (C) Copyright 1992-1996, M-Systems Ltd. TrueFFS-BIOS -- Version 3.3.9 for DiskOnChip 2000 (V4.3) Copryright (C) M-Systems, 1992-2001 Linux Boot Messages (Floppy Boot) ================================Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/mtdcore.o Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/nand/nand_ids.o Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/devices/docecc.o Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/devices/doc2000.o Using /opt/files/lib/modules/2.4.23/kernel/drivers/mtd/mtd_bkl_devs.o DiskOnChip 2000 found at address 0xD8000 Flash chip foind: Manufacturer ID: 98, Chip ID: E6 (Toshiba: NAND 8MiB 3,3V) 3 flash chips found. Total DiskOnChip size: 24 MiB Ignoring DiskOnChip 2000 at 0xDA000 - already configured Ignoring DiskOnChip 2000 at 0xDC000 - already configured Ignoring DiskOnChip 2000 at 0xDE000 - already configured Using /opt/files/lib/modules/2.4.23/kernel/drivers/devices/docprobe.o NFTL driver: nftlcore.c $Revision: 1.94 $, nftlmount.c $Revision: 1.34 $ NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we know what it means ... Linux Boot Messages (Doc2000 Boot) =================================SYSLINUX 1.76 0x3d93445f ... System dies after the message above. Does anybody have an idea ? Any help greatly appreciated thanks Thorsten