similar to: data aquistion cards

Hello Guys! I've been doing data aquisition of a pressure measurement system that communicates using TCP/IP protocol. R's socket connection has been a blessing for aquiring this data. I've been doing this data aquisition on Linux (where I do most of the development) and Windows. It works fine on both systems but there is only a slight problem (not really a problem, something weird).

Just happy. hardware information: -------------- Some small factor IBM Celetron (coppermine) at 1100 (11*100FSB) 256 RAM 15GB Hard. 1 x Digium E100P - E1 Line from telco with 300 Dids 1 x TDM400P for local phones --------------- Few small machines (mainly brand PII at 233Mhz with TDM400P Cards. --------------- There is a lot of SIP equipment attached: 2 x Micronet SIP Gateways 1 x ata186 1 x

Hi Xen-Users! We run an large HA XEN system based on heartbeat2. Storage base is an infiniband storage cluster exporting iSCSI devices to the frontend HA XEN Machines. The iSCSI devices are used as pysical devices for the domUs using the block-iscsi mechanism (by the way thanks for this cool script). Recently we had a split brain in our heartbeat system. This causes both of our XEN servers to

There was a similar topic of mine regarding this, but I think it got lost or forgotten. Anyway, my question is now clearer, I guess. I'm trying to get Multisim 10.0.1 to work with Wine, already updated to 1.3.7. I first installed it (demo version) on Windows, then copied the entire National Instruments to my /home directory, and installed missing libraries and jet40 from Winetricks. When I

> Also I needed to add several dlls and replace the update executable with a dummy one [just `int main(){return 0;}]. > > Don't forget to copy niini32.dll from the windows directory to remove several errors while starting. Copied the entire National Instruments folder and tried to run Multisim as demo (I leave the licence problems for later). The first log I got suggested

Hi everyone, I'm hoping you can give me some pointers. I have a requirement to draw multiple (103) xy line plots onto one output device. Ideally the plots should be displayed in a hexagonal grid (example at www.maladmin.com/example.jpg). I can calculate the locations for each waveform but am wondering how to create multiple plotting areas. I have come accross references to a package grid

On 17/11/16 13:15, Reinald Gfuellner via samba wrote: > I try to set up a Samba4-based Fileserver in an Samba3-DC enviroment. > Filesystem is ext4, CIFS + NFS4 should be provided. The same ACLs should > be used over both protocols. > > With Samba 3 this was possible (using POSIX 1003.1e DRAFT 17 ACLs only) > . How can I do the same with Samba 4 ? > > Posix-ACLs set on

Hello, I have a usb data aquisition device interfaced by mass storage protocol. I open it like: hEcgDrive=CreateFile("\\\\.\\g:", GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL | FILE_FLAG_NO_BUFFERING | FILE_FLAG_WRITE_THROUGH | FILE_FLAG_OVERLAPPED, NULL); for communication I use DeviceIoControl(hEcgDrive,

Dear all, I need to run a interactive procedure where the user will need click on the screen (over a XY plot) and I need to record the XY coordinate which the user clicked. Roughly I wrote a short code below. You see that I suppose that the user will choose four coordinates inside the region of intersection between three segmentes. On each click, I would like to record the position clicked in a

I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on usb i get frequent communication errors and data aquisition stopped. Mine has a serial connection, also. Operating via serial has no trouble. Maybe it's something related to usb setting in bios, i.e. Legacy mode, speed setting, etc. However on serial mode looks like the eaton or hoe power protector software does not

Hi list, I have a client with a strange requirement: putting a noise gate on the Asterisk channel. For those who are not familiar with them, noise gates are used in musical instruments to avoid entering low-level noise into the amp system. What they basically do is, they measure the volume of the channel, and when it's too low they just let the channel close, i.e send perfect silence,

I try to set up a Samba4-based Fileserver in an Samba3-DC enviroment. Filesystem is ext4, CIFS + NFS4 should be provided. The same ACLs should be used over both protocols. With Samba 3 this was possible (using POSIX 1003.1e DRAFT 17 ACLs only) . How can I do the same with Samba 4 ? Posix-ACLs set on the server with setfacl are recogniced on a windows-client. But every change I do on a

Zitat von nicolae788 <nicolae788 at gmail.com>: > I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on > usb i get frequent communication errors and data aquisition stopped. Mine > has a serial connection, also. Operating via serial has no trouble. Maybe > it's something related to usb setting in bios, i.e. Legacy mode, speed > setting, etc. >

On February 12, 2019 9:37:17 AM UTC, nicolae788 <nicolae788 at gmail.com> wrote: >I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected >on >usb i get frequent communication errors and data aquisition stopped. >Mine >has a serial connection, also. Operating via serial has no trouble. >Maybe >it's something related to usb setting in bios, i.e.

hi everybody and thanks for replying to my previous posts! i have some questions about the new cards announced on digium's website: these cards are 1-4 fxs interfaces, meaning i can take 4 analog phone handsets w/standard rj11's and plug them in to dial via *, right? not until fxo is implemented (is it going to be? when?) can i plug analog phone lines in? if the ports are made fxo/fxs

hello list, i have a problem regarding the synchronisity (clock source) when using multiple cards. e.g. when having connected one PRI port of our TE410P to the telco, i need to have the analog card like the TDM400P or a B410P synchronous to the clock of our telco provider. otherwise faxing on the analog cards does not work or i get cracking noise or even hangups on my BRI lines, due to bit slips.

Hi, everyone: I am developing a system using Asterisk, TDM-400 analog cards, analog lines, and Polycom SIP phones for internal extensions. Initially there was bad echo but after a series of efforts, I've managed to reduce it to a negligible level (it only happens when both parties speak simultaneously, and even there, only for a few hundred milliseconds). From an echo standpoint, things are

I was able to install the curl library with no problems. However, when I tried to install ggplot (install.packages("ggplot2")), I got the same message as earlier, that R can't load internet.so. Thanks for your help! On Wed, Apr 20, 2016 at 1:24 PM, Tom Wright <tom at maladmin.com> wrote: > apt-get install curl libcurl4-openssl-dev > > On Wed, 2016-04-20 at 09:36

Hello Marc, Could you post the install details for the Diva PCI? I have a Diva Pro PCI 3.0 and I am looking to get it working... I am running Debian Testing. So far it appears there are a few things floating around but I am not certain which direction to go. I know I need to load the firmware first. I did manage to load the modules ok. Thanks, Greg -----Original Message----- From:

Can someone please give me a pointer here. I have two matrices matA A B C 1 5 2 4 2 2 4 3 3 1 2 4 matB A B C 1 TRUE FALSE TRUE 2 FALSE TRUE TRUE 3 FALSE FALSE FALSE how do I extract all the values from matA where the coresponding entry in matB == TRUE (or FALSE), perferably in vector form. Many thanks tom