similar to: R-1.6.0 to 1.6.1 diff?

To all who have an AMD + Windows based PC: I have gotten a few similar bug reports about encoding errors with FLAC. The common features are: - Repeatedly encoding the same file with verify will have verify errors some of the time (looks like aroung 50%) and the verify errors will occur in different places each time. - This is happening on AMD PCs running Windows. More reports come from

When I try to script/generate something I have to wait above 2 minutes befor I get result. Is there some way to fix this? I have Intel Core 2 Duo 6420 with 2GB RAM. On my Slackware Duron 800 MHz it takes about 45 sec... --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to

I am trying to move from IAX2 to SIP for voipbuster, moving at the same time to sip1.voipbuster.com. When I try calling out, I see that there is SIP exchange, and in many cases also RTP data being exchanged. Hover in a very large number of attempts the connection is not established. Half of the time there is no RTP, the rest of the time there *is* RTP data flowing in two ways, but no ringtone is

Hello there ! I have a little problem I hope one of you can help me with. OpenGL won't work with wine, but it works fine under native linux. Here's some output from wine when I tried to run Quake3 Arena: [root@linux q3]# wine quake3.exe Loading required GL library /usr/X11R6/lib/libGL.so.1.2 err:mmsys:MMDRV_InitHardcoded You didn't setup properly the config file for the Wine

Hi, I have a data.frame with 294 columns and 211 rows. I am calculating correlations between all pairs of columns (excluding column 1) and based on these correlation values I delete one column from any pair that shows a R^2 greater than a cuttoff value. (Rather than directly delete the column all I do is store the column number, and do the deletion later) The code I am using is: ndesc

Hi all, I am probably missing something ultimately obvious, but I have a problem configuring freepbx... Using Edgy Eft with the cvs freePBX 2.2.1 and followed the Ubuntu installation guide on freepbx.org. System pxe-boots from a server with NFS root on same Using * 1.2 current (from source, not .deb's) Using mISDN-streams (from source, not .deb's) Using freePBX-2.2.1 (from source, not

Hang on.... there's a non commercial G729 codec that will work with Asterisk? Can someone point me to where I can find it? Thanks, Doug. -----Original Message----- From: Francesco Peeters (Asterisk) [mailto:francesco@fampeeters.com] Sent: Sun 1/22/2006 8:27 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion

helo I am running samba on an 800 Duron / 640MB PC2100 DDR Ram / 40 GB IBM Deskstar with slackware 8 / 2.2.17 Optimized for Duron. Whenever I copy files to the server, my load average gets to be about 6.0-8.0! On the 700 Duron we have at the office where I work, (same specs except it has 768MB of SDRAM and a RAID Array). Would the reason my box runs so slow be because its swap drive and the

Yep I did the same. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Francesco Peeters (Asterisk) Sent: Saturday, 21 January 2006 5:34 PM To: fbraeuer@gmail.com; Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

Hello All, My asterisk installation has now been running for over two months without a hitch, and I've decided it's time to move things around a bit. It's currently installed on a 2.7GHz Celeron under RH9 installed on a 10GB "leftover" drive. Thanks to the strange marketing method called "Mail-In-Rebate", I have a fresh 160GB drive ($50), and I'm itching to

Hello, I''ve setuped an ethernet bridge on a debian sarge 3.1 with l7-filter + ipp2 shapper rules The server is a supermicro p4sci + celeron pentium 4 base 3ghz + 512Mb + 2 ethernet e1000 One interface is connected to a cisco catalyst switch The other interface is connected directly to a CMTS (a sort of router for cable modem) configured as bridge too. More than 20Mbps of bandwith

Does anybody know what went wrong? Wine doesn't seem to work on RedHat 7.0 Hans [root@duron win98]# wine --winver win98 ./winmine.exe err:module:BUILTIN32_dlopen failed to load .so lib for builtin wprocs.dll: symbol __sysconf, version GLIBC_2.2 not defined in file libc.so.6 with link time reference err:int:INT_GetPMHandler could not load wprocs.dll err:seh:UnhandledExceptionFilter

I have been using a laptop computer of Pentium III 1.13 Ghz. I heard that AMD's Athlon has excellent floating point capacity. So I bought a Athlon 2200+ laptop yesterday. I expected that new Athlon 2200+ will be twice as fast as the P III 1.13 GB. I ran a R simulation program and the new computer is only 30% faster, in fact slightly slower than a Celeron 1.50 GB laptop. I am very disappointed

Thanks but this is for a test, I didn't buy the first one as it's a non commercial installation. I'm trying to test bandwidth etc so I need to try out how 4 of them handle the link simultaneously, I just don't know how to add a second test license. Dean ________________________________ From: asterisk-users-bounces@lists.digium.com

Hello, I switched from my PSTN provider to a voip provider. (Voicedata in the Netherlands) >From the moment i switched all inbound calls are terminated after aproximatly 1 minute. The provider tells me it's not their issue since I have no other configuration than all their other users. What can I do. I removed all asterisk functionality by forwarding the inboud call directly to a local

Hi All Apologises if this has been disussed and I missed it. My SetUp I have a sip phone registered to an asterisk box (a1) in one location 1. This phone dials an extension which is in another location, so a1 passes the call via IAX to the other asterisk (a2) in location 2 which then dials the local phone. My Problem The caller ID setup in the sip.conf for the phone registered to a1 is not

Hi everyone, I've been using nut 2.0.3 for more than a year on a Unitek iZi UPS 525 (which is a rebadged Mustek). Everything worked fine and last week, when pressed by RENEL :-) I ran a battery test which showed the system to have 17min of back-up power (yes, still haven't figured out how to use upssched...) The system used for testing was an old PIII/500MHz/512KB cache, 256MB RAM (3 x

Sorry for being a bit of a newbie here but I find the docs or README for downloading the G.729 codec from Digium are not as detailed as I would like or just don't really break down the different versions to a point that I am clear on which one to grab. The choices for 32bit are: drwxr-xr-x 3 0 0 4096 Dec 05 00:21 athlon-xp drwxr-xr-x 3 0 0 4096 Dec

Good morning, I've inherited an old laptop from my wife that I'd like to use when I travel (it's fairly small with a 12" screen). The bad part is that it is maxed out on memory with 384MB. Has anyone played with using Centos5 on systems with little memory? Ideally, I don't need too much - Firefox, Openoffice, a little Perl/Python/C here and there. I was thinking about using

I've spent the past week experimenting with Asterisk@Home 2.6, and then Asterisk 1.2.6 individually, on VMWare Workstation 5.5. I have an entirely IP (hard & soft)phone setup (IAX and SIP) so I have no requirements to support any Digium PCI cards, etc. All in Asterisk works extremely well except for one thing: Playback of sounds (GSM format) such as an ivr greetings, sound terrible.