similar to: OCFS2 / XEN / Snapshots

Hello all, I've got heavy troubles with my ocfs2 environment. Cluster filesystem worked fine for about 3-6 weeks after initial setup, but since 1 week performance issues occurs. I've already searched long time in google and on this mailing list but I wasn't able to found any solution. I've found a lot of posts with "same" problems but without the magic answer :-)

Hello, I have a question about ocfs2 global heartbeat mode In my cluster 17 nodes with 4 FC luns and global heartbeat mode, but when one node disconnect from ethernet network it go to reboot. This is the correct behavior for global heatbeat mode? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I also sent this to OCFS2-devel but no response so far. So... I noticed that OCFS2 got updated in the last few days. I just tried to do a build and got this: [root@linuxjohn2 trunk]# make make -C src make[1]: Entering directory `/root/ocfs2/trunk/src' make[1]: *** No rule to make target `inc/io.h', needed by `alloc.c'. Stop. make[1]: Leaving directory `/root/ocfs2/trunk/src'

Hi All, Is there any one know if OCFS2 will be certified on RedHat AS3 or 2.1? On http://oss.oracle.com I see OCFS2 Beta is available for RHAS 4 only. Rgds, Huy. == Nguyen Quang Huy Sr. Technical Sales Consultant Oracle Vietnam 53 Quang Trung St, Hanoi Email: quang.huy.nguyen@oracle.com Phone: +84 4 943 2595 Fax: +84 4 943 2592 == -----Original Message----- From:

Good day Guys We just had an issue on one of our clients servers, whereby the server was claiming there was no more space, but df showed there there plenty of space (even checked the inodes). We were really stummped, but after Googling around, the following command was needed to be run tunefs.ocfs2 --fs-features=discontig-bg /dev/drbd0 Here is the output before tunefs.ocfs2 was run user at

We are in the process of upgrading to OCFS2. We have recently restored our Production Database to a Development platform configured with OCFS2 with RMAN. No problems. As for the Production migration, we understand that you cannot mount an OCFS volume (our current configuration) with OCFS2. We are interested in mounting an EXT3 file system, performing a cold RMAN backup, copying the datafiles

I currenlty have the setup below, both nodes can see the shared drive ( confirmed with fdisk -l ) However I am unable to mount the shared device from node (2) after I mounted from node(1) I get the follwoign error mount.ocfs2: Transport endpoint is not connected while mounting /dev/sdb1 on /u02/oradata/orcl OS Red Hat uname -r --------------------------------- 2.6.9-22.ELsmp OCFS version

Hello, I have a 1TB ocfs partition mounted on mail server. It was a cluster before, but as one of the machines failed, the cluster has been taken by only one machine for ages. This server has courier-pop and imap, postfix and maildrop to deliver messages to the mailboxes. System is debian Etch, ocfs2-tools version 2.1. Recently, I tryed to insert a new machine into this cluster. Just right

Ok guys & gals here is the scenario: 1.) Host RHEL 4 U3 2.6.9-34.0.2.EL 2.) OCFS2 latest version 3.) Successfully formatted & mounted OCFS2 filesystems on 2 nodes /dev/sdb1 /u02/oradata/usdev/voting /dev/sdc1 /u02/oradata/usdev/data01 /dev/sdd1 /u02/oradata/usdev/data02 /dev/sde1 /u02/oradata/usdev/data03 4.) Downloaded & installed ASMLib 2.0 on both nodes 5.) Ran

I have installed OCFS2 on two nodes SuSE 10. Seems all works superb and nice from the first sight. But, /dev/sda ocfs2 rac1 is not sharing through net (port 7777) with rac0. On both nodes I have 500Mb /dev/sda disks that are mounted (and are ocfs2). But they did not share the content with each other (files and folders in it). So when I am creating the file in one node I am expecting to

Hello all, are there any issues concerning ocfs2 (v 1.2.3) and device-mapper-multipath-0.4.5-12.0.RHEL4? I've build a 4 node cluster with two ocfs2 mounts on /dev/dm-0 and /dev/dm-1. Under heavy load the nodes dies after about two minutes reproducably ;-(( Once I've loaded the ocfs2 modules it seems to me that both modules (device-mapper-multipath related as well as ocfs related) are

I also sent this to OCFS2-devel but no response so far. So... I noticed that OCFS2 got updated in the last few days. I just tried to do a build and got this: [root@linuxjohn2 trunk]# make make -C src make[1]: Entering directory `/root/ocfs2/trunk/src' make[1]: *** No rule to make target `inc/io.h', needed by `alloc.c'. Stop. make[1]: Leaving directory `/root/ocfs2/trunk/src'

Hi Yuvrajsinh, thank you for the reply, yes it was a kernel issue and we have done an upgrade to 2.6.18.308 and used the packges that match the version number, and I have done a update post this evening as below Hi All, since the post I have made some kind of a progress 1. I upgraded the kernel to 2.6.18-308.1.1.el5 same I was able to download the ocfs2 module is

Hi, First of all great project You are developing, really usefull,but.... Compiling the OCFS System under a clean RedHat 8 Installaton renders an error during compilation: make -C format make[2]: Entering directory `/root/ocfs-1.0.8/tools/format' gcc -g -O2 -pipe -I../../ocfs2/Common/inc -Iinc -I../../tools/debugocfs -I../../ocfs2/Linux/inc -DLINUX -DUSERSPACE_TOOL -o format.o -c

Hi all, We just finished up the last of the work to change the on-disk format of ocfs2 and we are about to move this from the branch into trunk in svn. We tried very hard to make every conceivable change that we would want in this last pass so that this would be the final on-disk change. What this means for any of you who are tracking this project is that you will need to reformat before picking

Hi, On 12/05/2017 11:19 PM, BASSAGET C?dric wrote: > Hello > Retried from scratch; and still have an error when trying to bring up > the second cluster : > > root at LAB-virtm6:/# o2cb register-cluster ocfs2new > o2cb: Internal logic failure while registering cluster 'ocfs2new' > > root at LAB-virtm6:/mnt/vol1_iscsi_san1# o2cb list-clusters > ocfs2 >

Hi, On 12/05/2017 11:19 PM, BASSAGET C?dric wrote: > Hello > Retried from scratch; and still have an error when trying to bring up > the second cluster : > > root at LAB-virtm6:/# o2cb register-cluster ocfs2new > o2cb: Internal logic failure while registering cluster 'ocfs2new' > > root at LAB-virtm6:/mnt/vol1_iscsi_san1# o2cb list-clusters > ocfs2 >

I also sent this to OCFS2-devel but no response so far. So... I noticed that OCFS2 got updated in the last few days. I just tried to do a build and got this: [root@linuxjohn2 trunk]# make make -C src make[1]: Entering directory `/root/ocfs2/trunk/src' make[1]: *** No rule to make target `inc/io.h', needed by `alloc.c'. Stop. make[1]: Leaving directory `/root/ocfs2/trunk/src'

Seems RPM compatibility issue with OS Kernel. Check OS Kernel and download RPM (4 Nos) for same kernel. Regards, Yuvrajsinh Chauhan || Sr. DBA || CRESTEL-PSG Elitecore Technologies Pvt. Ltd. 904, Silicon Tower || Off C.G.Road Behind Pariseema Building || Ahmedabad || INDIA [GSM]: +91 9727746022 -----Original Message----- From: ocfs2-users-bounces at oss.oracle.com [mailto:ocfs2-users-bounces

Hi! Seems we're facing some memory leak here. This is vanilla 2.6.19-rc6 on a x86_64 box, 4GB RAM. A simple `ls -Rn' on a filesystem with lots of files makes the box leak so much RAM that the OOM killer starts to kick in. With slab alloc debugging turned on, we see this: # mount; ls -Rn; wait some seconds; Ctrl-C [root@lnxp-1038:/backend1]$ cat /proc/slab_allocators | egrep