Displaying 20 results from an estimated 1000 matches similar to: "PAE panic on nv75a / Tecra M2"
2008 Feb 08
16
Dom0 issues: snv_79b and Tecra M9
Hi all,
I have a Toshiba Tecra M9 and have not been able to boot it dom0. This
is running SXDE 01/08, snv79b.
After booting under kmdb and setting moddebug=80000000 before booting
the Solaris kernel (with help from Dan Mick), I was able to see
mac_ether as the last thing loading, right after loading the e1000g
driver. I cannot drop into kmdb via F1-A after it hangs. I''ve also
2008 Feb 11
0
Re: achieving deterministic config with xVM (was: Dom0 issues: snv_79b and Tecra M9)
Matt Ingenthron wrote:
> This may be specific to my hardware, but I cannot get things to behave
> reliably on my system. For instance, I''ve had situations under xVM dom0
> where snv81 can see the e1000g interface with dladm show-dev, but not
> plumb it. Then one boot later, I can''t see it with dladm, but can plumb
> and up it with DHCP.
Are there any e1000g
2008 Oct 27
7
Fujitsu Siemens PRIMERGY RX300
Hi all
Opensolaris works perfectly, but I am not able to boot the xvm kernel on this hardware.
I added the -k option in grub, but the system hangs before the hostname line without any debug info.
I''ve tried snv from b94 to b99, with the same results.
If I install Debian with xen kernel I am able to use pvm and hvm guests.
What can I do ?
thanks
Giacomo
--
This message posted from
2008 Jan 31
5
Solaris DomU HVM Network issues
Hi,
I''m running Nevada 75a configured as dom0. I added a domU HVM running
Nevada 75a, on a Sun X4600 with 8 ADM Dual cores. I can get the domU
installed and configured, however, I can not get any network
connectivity. I followed the steps accoding to documents on Open
Solaris. I also followed some of the threads of the list to verify the
configuration, but I can not fix the
2008 May 22
2
Solaris dom0 xen-unstable.hg source for developers
I''m happy to announce that we have moved the xen-unstable.hg
Solaris dom0 development out to the OpenSolaris community.
For hard core developers, you can download, build, and
run Solaris dom0 and xen-unstable bits following the
instructions at the end of this post. We are currently
sync''d up to changeset #17644 (~May 15th). Hopefully we
will sync up with xen-unstable.hg every
2006 Oct 31
0
6324793 pci_autoconfig: duplicate devinfo nodes appear for CardBus bridge in Tecra M3 (fix lint)
Author: myers
Repository: /hg/zfs-crypto/gate
Revision: 868b2dedf16bd7d22452469e5ec4ef496fae2c3f
Log message:
6324793 pci_autoconfig: duplicate devinfo nodes appear for CardBus bridge in Tecra M3 (fix lint)
6326272 power button doesn''t shut down acpi systems (fix lint)
Files:
update: usr/src/uts/common/io/power.c
update: usr/src/uts/i86pc/io/pci/pci_boot.c
update:
2008 Aug 19
1
TECRA-A9 -- devcot LDA/sendmail
FreeBSD 6.3-RELEASE-p3 i386
---------------
sendmail -d0.1
Version 8.14.2
Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8
MIME8TO7
NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS
PIPELINING SASLv2
SCANF STARTTLS TCPWRAPPERS USERDB XDEBUG
------------------
dovecot-1.0.7
dovecot-sieve-1.0.2
_______________________
IMAP-UW was previously used.
2016 Apr 14
9
CentOS 7.2 laptop wireless Intel Corporation Centrino Wireless-N 2230 (rev c4)
With CentOS 7.2 a laptop wireless card is recognized in dmesg, but
nonfunctional. Toggling the hardware wifi switch causes the Bluetooth
icon to appear and disappear. The network configuration window shows
the Wireless tab greyed out. Rebooting with the bluetooth enabled
does not help. It appears the appropriate driver is iwlwifi, which is
what works in Fedora and appears to be available and
2007 Nov 15
11
I can''t use ''virt-install''
Hi
I have installed nevada77 in x4200. But i can''t use ''virt-install'' ro create guest domain. Do I need add more pkg? what''s wrong?
#virt-install --name xmv-test-1 ram 1024 --nographics --file /export/home/xmv-test-1 --location /export/home/software/snv-solarisdvd-x86-77.iso
Traceback (most recent call last):
File "/usr/bin/virt-install", line 657,
2010 Jun 14
7
OpenSolaris Sparc Xen boot problem
I am running OpenSolaris build 134 on a T1000 (Sparc).
It has been an uphill battle getting this far. Many of the commands I
find in the various documentation won''t work for me.
------------------------------------------------------------
steve@t1000:~# pfexec pkg install xvm-gui
Creating Plan
pkg: ''xvm-gui'' matches multiple packages
2007 Oct 31
3
virt-install fails in b75a
After an "exaustive" search on what may be causing this, I still can''t figure it out.
I keep getting this same error when trying to run virt-install:
# virt-install
Traceback (most recent call last):
File "/usr/bin/virt-install", line 666, in ?
main()
File "/usr/bin/virt-install", line 518, in main
conn = libvirt.open(options.connect)
File
2008 Jun 21
12
Bfu xVM to build 92 problems
Bfu 91 to 92 looks good
Proceed with xVM upgrade . After running:-
# sunos.hg/bin/build-all nondebug
bash-3.2# cd packages-nondebug
bash-3.2# pwd
/usr/tmp/packages-nondebug
bash-3.2# ls -l
total 20
drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirt
drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWlibvirtr
drwxr-xr-x 4 root root 512 Jun 21 08:57 SUNWurlgrabber
2009 Nov 16
5
xVM filas on SXCE 127
During boot, I get the following error:
Nov 16 09:16:41 sol11 svc.startd[7]: [ID 652011 daemon.warning] svc:/system xvm/store:default: Method "/lib/svc/method/xenstored start" failed with exit status 96.
Nov 16 09:16:41 sol11 svc.startd[7]: [ID 748625 daemon.error] system/xvm/store:default misconfigured: transitioned to maintenance (see ''svcs -xv'' for details)
It
2006 Aug 28
3
CPU Temprature
Hi;
While using xen-3.0.2 with 2.6.16.28 kernel CPU (Intel(R) Pentium(R) M
processor 1.73GHz) temprature is inreasing up to 104 C
(/proc/acpi/thermal_zone/THRM/trip_points reports 105 C is critical for CPU)
while idle or no domU working with very low system load, and if i
start to use domU, sometimes system freezes or reboots for heat.
But the same kernel just without Xen works normally and
2008 Feb 16
4
Solaris snv81 xVM on a Thinkpad T30
Trying to boot my Thinkpad T30 with Solaris snv_81 xVM it get the error message
This version of Solaris xVM does not support this hardware
The output of "echo ::interrupts | mdb -k" while booted without xVM is
bash-3.2# echo ::interrupts | mdb -k
IRQ Vector IPL(lo/hi) Bus Share ISR(s)
0 0x20 14/14 - 1 cbe_fire
1 0x21 5/5 ISA 1 i8042_intr
3 0x23
2009 Feb 12
4
Two zvol devices one volume?
Hi,
Can anyone explain the following to me?
Two zpool devices points at the same data, I was installing osol
2008.11 in xVM when I saw that there already was a partition on the
installation disk. An old dataset that I deleted since i gave it a
slightly different name than I intended is not removed under /dev. I
should not have used that name, but two device links should perhaps
not
2009 Feb 09
9
virt-manager and virt-install can''t use with new built xvm 3.3
Hi Dave,
I built successfully an xvm 3.3 system. However, I found virt-manager
and virt-install don''t work. I attached the error messages of both as
below.
xm tool seems to work. I can run OpenSolaris200811 LiveCD and install
it onto file based disk.
The error messages of virt-manager:
====start of error message====
Unable to open connection to hypervisor URI ''xen'':
2009 Jun 28
10
pygrub caching issue
https://bugzilla.redhat.com/show_bug.cgi?id=466681
just to be sure that some one in xvm-team notices that before any bits
from xvm-gate are putback ;)
Florian
2013 Mar 09
3
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34)
Hi List,
Any idea how to get wireless lan : 03:00.0 Network controller: Intel
Corporation Centrino Advanced-N 6205 (rev 34)
working on centos 5?
Eero
2007 Nov 19
3
virt-install complains about vnc-password not being set
Hi All,
Im getting the following error when I run virt-install:
bash-3.2# virt-install -n winxp-01 --hvm -r 384 --vnc -f
/etc/opt/vms/winxp-01.img -s 16 -c /etc/opt/images/windowsXP_SP2.iso
Starting install...
libvir: Xen Daemon error : POST operation failed: (xend.err ''Error
creating domain: vncpasswd is not set up in VMconfig and xend-config.'')
Traceback (most recent call