similar to: installing a pseudo driver in a Solaris DOM U and DOM U reboot

Hello, I''ve installed a OpenSolaris dom0 snv_44 on a x4100 server, and booted a 32-bit xen kernel. I''m trying to create a OpenSolaris DOMU (snv_44) by following the howto described at http://www.opensolaris.org/os/community/xen/howto/create-osox-domu/. I did not manage to create a diskless environment by using SUNWCXall. I''ve created SUNWCreq instead and add the

Hi, I have installed b_78 on a Dell 2950 and booting to bare metal works fine but when I try to boot using the grub entry Solaris xVM it will boot to the point where it displays the uname info and then just stays there. It will not boot past that point. I have enabled VT technology in the BIOS (but only after the installation). Where/what can I look at to trouble shoot this? I am new to xen and

Hardware Supermicro X7DAE (AHCI BIOS) dual Intel Woodcrest processors, 6 x Western Digital Raptor SATA drives. I have installed b62 running 64 bit succesfully on a PATA drive. The BIOS is configured to access the SATA drives in native mode using hte AHCI Bios. I have 6 SATA II drives accessed via the Solaris AHCI driver. I have created a ZFS file system across all 6 drives. This works fine until

Hi, How does the requirement that phi instructions have one value per predecessor basic block interact with indirectbr instructions? For instance, take the following code: L1: br i1 %somevalue, label %L2, label %L3 L2: %ret1 = i8* blockaddress(@myfunction, %L5) br label %L4 L3: %ret2 = i8* blockaddress(@myfunction, %L6) br label %L4 L4: %ret = phi i8* [%ret1, L2], [%ret2, L3]

On 11/12/2009, at 10:43 AM, Anton Korobeynikov wrote: > Hi, Chris > >> That is target independent code, so you should not put sparc specific changes there. It sounds like one of the sparc-specific target hooks is wrong. > Since sparc does not provide any hooks for operation of branches (e.g. > AnalyzeBranch and friends) it might be possible that generic codegen > code is

Hello, I''m using the latest b75 ISO to try and get a solaris dom0 running on my laptop, a Sony SZ-330P. The Xen LiveCD works just fine, so I know that theoretically it should work. Build 75 also works just fine on my Sony, including sound and video, etc. But when I try and boot the Xen kernel, the system hangs. There''s no panic printed to console. If I pass a -v option at

Hi to all, I am trying to run breakpoints() on a fairly large sample (>10.000 observations). The process is very slow, any idea on how to speed this up? I have tried the hpc="foreach" parameter, but this didn't work at all when I tried to run it on a smaller sample. breakpoints(x ~ x.l1 + x.l2 + X.l3 + x.l4 + x.l5 + x.l6 + x.l7 + x.l8 + y.l1 + y.l2 + y.l3 + y.l4 + y.l5 + y.l6

After BFU-ing my system to b75 I ended up with a panicing system when booting into Xen: grub> #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- grub> title Solaris on Xen grub> kernel$ /boot/$ISADIR/xen.gz grub> module$ /platform/i86xpv/kernel/$ISADIR/unix /platform/i86xpv/kernel/$ISADIR/unix -B console=ttyb grub> module$ /platform/i86pc/$ISADIR/boot_archive grub>

On Feb 8, 2010, at 12:37 AM, Nathan Keynes wrote: > Firstly, the BNE/BA pair should be reduced to a BE (I assume this is > the responsibility of AnalyzeBranch and friends that you mention). Right. Implementing AnalyzeBranch will allow a bunch of block layout and branch optimizations to happen. > However I still wouldn't have expected that to result in the label > being

The following IR implements the following nested loop: for (int i = start ; i < end ; ++i ) for (int p = 0 ; p < 4 ; ++p ) a[i*4+p] = b[i*4+p] + c[i*4+p]; define void @main(i64 %arg0, i64 %arg1, i1 %arg2, i64 %arg3, float* noalias %arg4, float* noalias %arg5, float* noalias %arg6) { entrypoint: br i1 %arg2, label %L0, label %L1 L0:

I have a number of systems running solaris10 and i see the package and binary for dtrace installed however whenever we try to run anything we get this error dtrace: failed to initialize dtrace: DTrace device not available on system the only system in which i dont have this error is the development server that has the full solaris 10 install while others are minimized, do i need additional

I found the following document on making R packages. But it is old. I'm wondering if there is more current ones and hopefully more complete ones. http://biosun1.harvard.edu/courses/individual/bio271/lectures/L6/Rpkg.pdf

Hello Dave, Thank you very much for your support and your interest. Actually so few people took a look at the NHW Project, but with this version the NHW Project is becoming very interesting, it is royalty-free and very fast furthermore. Really if you could find time, I would be very interested in any opinion from the Xiph.org community! Cheers, Raphael 2018-04-28 21:40 GMT+02:00 Dave

The loop vectorizer relies on cleanup passes to be run after it: from Transforms/IPO/PassManagerBuilder.cpp: // Add the various vectorization passes and relevant cleanup passes for // them since we are no longer in the middle of the main scalar pipeline. MPM.add(createLoopVectorizePass(DisableUnrollLoops)); MPM.add(createInstructionCombiningPass());

Hi all, I am having memory allocation problem with my R 2.2.1 for Mac OS. The following is the error message that I get. I do not get this message if I break down the large dataset in to sub datasets. I think breaking up the dataset is not a sustainable solution in the long run. The data that I am analysing is essentially big, and it would be reasonable to do the analyis on the whole dataset

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

Thank you so much Sir!!! If you have time, do not hesitate to let us know what you would think of the NHW Project.Any remark, opinion would be very welcome! Many thanks again! Best regards, Raphael 2018-04-28 23:02 GMT+02:00 Dave Johnson Games <davefilms.us at gmail.com>: > Cool, I'll check it out. > > On Sat, Apr 28, 2018, 3:09 PM Raphael Canut <nhwcodec at gmail.com>

Does anyone know of a Linux program, GUI preferred, for managing the phonebook list on the L6 cel phone? -- --- David Woyciesjes

I''ve got a CentOS 5.3 dom0 with Xen 3.4.1-rc5 (or so). I''ve tried the same stuff below with 3.4.0, no difference. I''m trying to install 2009.06 PV domU based on instructions from [1] and [2]. I can run the install fine, I can also get the kernel and boot archive (from [2]) after the install. But for the life of me I can''t get the installed domU to boot. If I

The instcombine pass cleans up a lot. Any idea why there are still shufflevector, insertelement, *and* bitcast (!!) etc. instructions left? The original loop is so clean, a textbook example I'd say. There is no need to shuffle anything.At least I don't see it. Frank vector.ph: ; preds = %L5 %broadcast.splatinsert1 = insertelement <4 x