similar to: pciback for usb-controller and usb-storage on x86_64 ends in Oops

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

Hello list, After upgrading from BRIstuff 1y-b to 1y-e my ISDN card is suddently detected as 2 ports instead of 4. I still load the driver as "modprobe qozap ports=12" as I've always done. But now it only sees 2 ports. Output of "lspci -vvv" ------ cut -------- 02:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01) Subsystem:

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Hi List, I'm setting up a system with one TDM400P (2*FXO + 2 * FXS) and one Junghanns QuadBRI on a Fedora Core 6 (Kernel 2.6.20-1.2944.fc6). I'm using the bristuff-0.3.0-PRE-1y-e kit. It download zaptel-1.2.16, libpri-1.2.4 and asterisk-1.2.17 When it's the time for ztcfg to do its job it complains with <ZT_SPANCONFIG failed on span 2: No such device or address (6)>

Hi everyone. We have a problem here... Hope somebody can give us some hints. We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem. Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and libpri (1.4.3) is installed. There is a QuadBRI-Card installed: # lspci -vv -s 06:04.0 06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)

I came into an Abit AX8 motherboard and single core AMD Athlon 64 FX. I did a quick install of CentOS 5.0 on it to make sure everything worked and then returned the hard disk and case to the original owner. After getting a new case and hard disk, I downloaded the CentOS 5.1 cd images and installed. For some reason the motherboard's on board sound no longer works (worked with CentOS

I mistakenly only replied to Yijing Wang the first time. Here are the further details. uname -a: Linux p5-133 3.15.2-p5-133 #1 Thu Jun 26 22:56:27 EDT 2014 i586 GNU/Linux Here is the output from lspci -vvvxxx: root at p5-133:~# cat lspci.txt 00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

Yijing, cat /sys/bus/pci/devices/0000\:00\:0e.0/msi_bus returns 1, suggesting that it supports MSI. However, this "00:0e.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)" is a component of the addin card. Wouldn't the lack of support for MSI by the chipset "00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01)"

On Thu, Jul 3, 2014 at 10:35 PM, Yijing Wang <wangyijing at huawei.com> wrote: > Hi Brian, > From your 01:00.0 VGA compatible controller PCI config register, it supports 1 MSI vector, so I think this > card has no problem. But you didn't answer what's the pci_enable_msi() return during it enable MSI fail. > > You can check PCI bus whether support MSI like: > >

I have a new laptop (Dell 9400) that I am trying to work with Xen 3.0. Xen works fine, runs windows XP under HVM. But, the Xen kernel on Dom0 has a few problems with some of the hardware. The network card is a Broadcom 4400 10/100BaseT. Normally loading the b44 module gives this: Apr 28 20:07:53 ipanema kernel: [4294683.185000] b44.c:v0.97 (Nov 30, 2005) Apr 28 20:07:53 ipanema kernel:

Greetings, I am resending this as it doesn't appear in the archives and no one responded...maybe it got routed to /dev/null or something :-) I have asked this question the Scientific Linux mailing list (a few months ago) and got the suggestion I talk to the kernel guys. I pinged a kernel guy I know, and his suggestion was to ask the Nouveau list. So here I am. :-) I have had my work laptop

*RESEND* due to exceeding the mailinglists limit for attachment size. Hi, I''m trying to get secondary vga-passthrough on a HVM guest to work with a AMD HD6570 and the native kernel radeon driver and kernel modesetting. So the guest still gets the emulated stdvga or cirrus device(used in my case here) as primary/boot vga adapter. - When i don''t passthrough the radeon card, the

I have a few oqo2 units that I use for testing, normally using the dongle for ethernet connection. Well supposedly they have atheros wifi. in dmseg I see: ath5k 0000:03:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ath5k 0000:03:04.0: registered as 'phy0' ath5k phy0: Couldn't identify radio revision. ath5k 0000:03:04.0: PCI INT A disabled I press magic <fnc-?> per

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

Hello, A user (cc'd) reported that nouveau's enabling of MSI causes the card to not work on his setup [1]. I think the situation is that MSI is just not supported by the underlying motherboard, even though the card, and probably bridge, support it just fine. It's a very old board. The nouveau code does: pmc->use_msi = pci_enable_msi(device->pdev) == 0; Does it need to do more

Hi, I'm new to asterisk, in order to enable X-lite to make a call, what should i do before making a call? Current stage, 1. i have create a few accounts in sip.conf. 2. Registration are successful. Pls advice me how to continue then... Thanks _________________________________________________________________ Personalize your Live.com homepage with the news, weather, and photos you

Hello, I have a PC Chips A31G board with AGPro slot and found that nouveau does not work properly with it. Console works but reverts to software mode, X11 hangs with mouse cursor only. The slot is physically AGP 1.5V but is wired to PCI bus as the chipset (SiS 761) does not support AGP cards. To further complicate things, the chipset has AGP capability - but only for the integrated video. You can

Hi, The following error message appeared in syslog while the filesharing client overnet was running and writing to the disk. I first only noticed that suddenly Opera was frozen and no new terminals could be started. Regards W. Pichler syslog Jun 15 13:15:34 pc kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000000e Jun 15 13:15:34 pc kernel: printing eip: Jun