similar to: HVM Windows - handover from qemu network drivers to PV network drivers

Hi Everyone, In my HVM guest''s config file, I have given my guest 3 interface. I have called them fw1, fw2 and fw3. I have joined each interface to a bridge on the Dom0. This does appear when I do a "brctl show". However, there are 3 other interfaces also added called tapx.0,tapx.1 and tapx.2 (Where x is the domain ID for the guest). Furthermore, I am only able to run

Hi, I've been testing the Debian packages ahead of the Debian 7 release (which is very imminent) I believe this is a serious bug[1] in the package, as it appears that HVM networking is broken, or at the very least, requires some undocumented configuration step Specifically: - I can start the HVM domU without any vif - if I attach a vif, the domU will not start Looking at

I am trying to get PV drivers running on both Centos 5.1 and Centos 5.3 HVMs, my DomU is Centos 5.2 with Xen 3.31. For 5.1 I install the kmod-xenpv RPM but for 5.3 the drivers seem to be built-in. For the network drivers to work I had to unload the Realtek NIC driver and renamed its .ko files to stop it loading. Adding the Xen-Vnif alias to modprobe.conf then got the PV NICs working nicely (Much

Subject says it all. How can I get the 1.3 version and 0.9.28 to compile on CentOS 5.8 ??? When I compile the two as modules I get errors. My Makefile is: obj-m += 8139cp.o 8139too.o all: make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules clean: make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean The errors I get are: Entering directory

Hi, I have just installed Slackware64 13.0 Linux as a HVM guest with Xen 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details, please refer to the following link: http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/ There are 83 screenshots so far at

Hi, I have just installed Slackware64 13.0 Linux as a HVM guest with Xen 3.5-unstable changeset 20143 pv-ops dom0 kernel 2.6.31.4. For more details, please refer to the following link: http://enmingteo.wordpress.com/2009/11/01/picture-tutorial-how-to-setup-slackware64-13-0-hvm-domu-with-xen-3-5-unstable-pv-ops-dom0-kernel-2-6-31-4-in-fedora-11-x86-64-dom0/ There are 83 screenshots so far at

Just thought I'd pass along that I have successfully installed FreeBSD 7.0 into a Xen 3.1 HVM. ?This one went as smooth as I expected, considering my experience with 6.3. ?Haven't done any benchmarking or stress testing or port installs or anything. ?But so far it's working nicely. Here's all the info. ?If you'd like to see anything else, let me know. Host hardware: ?

I have set up both Windows XP and Windows 2000 Server clients on Xen under Centos 5.1 and am unable to install an application firewall. I have tried the latest: 1) Agnitum Outpost Commercial Version 2) Comodo Firewall (ver 2 on Windows 2000) 3) Sunbelt Commercial Version With all of these when the firewall starts up it results in a BSOD. With Windows XP and Agnitum I can go back to a previous

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

So I successfully installed the GPLPV drivers in a Windows installation I have running under Xen. Turns out SP2 is needed - I wish this was slightly better documented somewhere, as the machine ended up bluescreening and I had to use /NOGPLPV to get it to boot again so I could upgrade it to SP2. My question is this: I ended up using ''disable'' in device manager for the rtl8139 and

On 14/05/2019 13:09, Jonathan Billings wrote: > On Tue, May 14, 2019 at 10:13:35AM +0800, qw wrote: >> I use the wifi adaptor, Edimax AC1200, and its driver can be >> downloaded from >> >> 'http://www.edimax.com.tw/edimax/download/download/data/edimax/tw/download/for_home/wireless_adapters/wireless_adapters_ac1200_dual-band/ew-7822ulc'. >> >> >>

I found (and fixed) a problem with my realtek onboard 8139 controller. dhcpd server sends filename "pxelinux.0" but realtek requests "pxelinux.0\377" (i.e. the octal character 377 is appended), resulting in a file not found during the tftpd phase. I fixed this by adding a mapping to tftpd: # strip ending garbage from filenames (Realtek PXE bug) r ^([[:graph:]]*)(.+)$ \1

Hello, While testing Fedora 16 Xen PVHVM guests I noticed the following problem: When starting F16 PVHVM guest I can see the vifX.0 and tapX.0 interfaces appear on dom0, but after the guest kernel (Linux 3.1.0) starts and loads PVHVM drivers the vif/tap interfaces disappear from dom0.. so the bridge in dom0 doesn''t have any vifs/taps connected to it anymore. Has anyone seen that

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

Hi, I am trying to run solaris 10 (9/10) on Xen 3.4 (centos5.5 as dom0) in HVM mode. I can see the realtek 8139 network adapters when I do pciscan but ''ifconfig -a'' just lists loopback device. I can load rtls drivers but still these realtek interfaces are not available. I found a link which does say The rtls driver from Realtek still uses version 0 interfaces that are now

Greetings- I'm attempting to get CentOS 5.5 x86 (yes, very specific version required for specific software usage scenario... don't ask) running on an Intel D425KT mini-ITX motherboard. Everything works fine, with the exception of the onboard ethernet, which is a Realtek RTL8105E chip. The stock CentOS installation attempts to use the r8169 driver, which does not work. I've been around

Realtek is "real" good about getting drivers for their chips into the kernels as soon as possible. They are one of the few vendors that I have never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from >

Hi Is it true that the GPLPV drivers is incompatible with QCOW images? The Windows DomU works fine with raw standard "file:/" images, and paravirtualized Linux DomU works fine with QCOW and raw images. If i use QCOW images with my Windows DomU''s i get a stop error: 0x00000007b (inaccessible boot device). It looks like the blkback.3.hda process, that normally starts with

Hi! I?m having trubbles with the speed on my samba server, I just uppgraded to gigabit (Realtek 8169 NIC) at home when i copy stuff from the samba server i get around 5-6Mb/sec and if i use ftp to access the same file on the same server i get almost 30Mb/sec does anyone have a clue what causes this problem? When i used my old 3com 905c for the local net i got normal 100Mbit speed (around

greetings one and all. installing centos 7 32 bit i386 to laptop; specs: toshiba satellite l455d-s5976 amd sempron si-42 2 GB ddr2 250 GB hdd ]$ lspci|grep Realtek 0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. \ RTL8187SE Wireless LAN Controller (rev 22) 14:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. \ RTL8101/2/6E PCI Express Fast/Gigabit Ethernet