similar to: Irq bug

I configured a domU to access to the physical serial port of the dom0 (/dev/ttyS0) typing this in the domU configuration file: irq = [ 4 ] ioports = [ "3f8-3ff" ] The domU starts without any error, but the serial port isn''t recognised. The /dev/ttyS0 device exists on the domU, and I blacklisted the serial_core, the 8250 and 8250_pnp modules on the dom0. What is the problem?

Is serial port "passthrough" possible for the version of xen that ships with centos 5.2? I've disabled the xen hypervisor serial console, and can see the serial port in dom0. I've masked out the 8250, 8250_pnp and serial_core modules on dom0 and rebooted. xm create domain fails with the error that exactly 4 arguments are required and only 3 were given. Steps I followed: 1) I

Hello, With Xen-4, is it still possible to access some serial device (an UPS in my case) from a domU ? I can''t get it to work : ttyS0 is here in dom0 ( as shown by commands like grep serial /proc/ioports ; dmesg | grep ttyS ; stty -aF /dev/ttyS0 ) but not from a domU : $ grep serial /proc/ioports $ dmesg | grep ttyS $ stty -aF /dev/ttyS0 stty: /dev/ttyS0: Input/output error $ ls

Hello, On a xenserver with several (39) domUs, we experience problems with the system clock of the domUs. The clock seems to drift away several seconds up to two minutes from the dom0 clock. We do have set independent_wallclock=0. According to the docs (i.e. http://wiki.xensource.com/xenwiki/InstallationNotes) that way domUs should use the dom0 clock, but apparently that''s not the case.

# HG changeset patch # User Ian Campbell <ian.campbell@citrix.com> # Date 1346428441 -3600 # Node ID ddde6c2c45de8e60518aafa077f0f3867ff68e17 # Parent ccbee5bcb31b72706497725381f4e6836b9df657 libxl/xl: implement support for guest iooprt and irq permissions. This is useful for passing legacy ISA devices (e.g. com ports, parallel ports) to guests. Supported syntax is as described in

I am having problem when I am trying to access serial port in domU. I found a solution from the wiki.xensource.com as in the following lines: ___________________________________________________________________________ To have access to the serial port in DomU, we need to prevent Dom0 from taken hold of this piece of hardware add to /etc/hotplug/blacklist the following modules to exclude from

Hi everyone! I just wanted to share all the bits of information I needed while trying to get a serial modem to work under a Xen guest :) I found other howtos but every one was missing something. So, my setup consists of dom0 and domU with CentOS 5.2, kernel 2.6.18-92.1.10.el5xen and Xen 3.2.1 To get /dev/ttyS0 to work under domU: - Tell Xen to use something else for its console: in

Just something to be added: - This procedure doesn''t work with a Fedora 9 DomU - Maybe you have to blacklist some modules in the Dom0: AFAIK you have to rmmod (better: blacklist on boot using modprobe.conf) these modules: serial_core 8250 and 8250_pnp ----- Ursprüngliche Mail ---- Von: Federico Fanton <fake@panizzolo.it> An: xen-users@lists.xensource.com Gesendet: Freitag, den

Package: src:linux Version: 3.2.41-2 Severity: important Hello, I just discovered a strange bug with serial passthrough in xen 4.1 on Debian Wheezy. The Dom0 has a GSM modem connected to serial port. The serial port is passed through to a DomU with options 'irq = [ 4 ]' and 'ioports = [ '3f8-3ff ]'. This worked as expected on Debian Squeeze with Xen 4.0 and Linux kernel

Hello Can anyone share a known working config for xen which would transfer a serial interface ( add-on card preferably, mine uses e880-e887 : 0000:03:05.0 / ec00-ec07 : 0000:03:05.0 ) to a DomU ? I've been trying with the stock packages from Centos 5.5 ( fully updated) and also with gitco's 3.4.3 but after 2 days of googling and testing we still fail to access the serial

Hello, I just discovered a strange bug with serial passthrough in xen 4.1 on Debian Wheezy. The Dom0 has a GSM modem connected to serial port. The serial port is passed through to a DomU with options 'irq = [ 4 ]' and 'ioports = [ '3f8-3ff ]'. This worked as expected on Debian Squeeze with Xen 4.0 and Linux kernel 2.6.32 (both for Dom0 and DomU). On Debian Wheezy with Xen

Hello, I just discovered a strange bug with serial passthrough in xen 4.1 on Debian Wheezy. The Dom0 has a GSM modem connected to serial port. The serial port is passed through to a DomU with options 'irq = [ 4 ]' and 'ioports = [ '3f8-3ff ]'. This worked as expected on Debian Squeeze with Xen 4.0 and Linux kernel 2.6.32 (both for Dom0 and DomU). On Debian Wheezy with Xen

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Howdy, I'd like an adive on what to use. I have sql users, and i want to have the lastlogin of them, what is the native option for this: * Using last_login plugin which will give me the last login? * Use postlogin for imap and pop3n which will give me besides lastlogin the IP and protocol? Thanks in advanced, -------------- next part -------------- An HTML attachment was

Hi List I'm trying to update to the lastest kernel but I have a dirver that is not inculded in the distrubution, and I had to use the driver disk when installing centos 4.4 in the first place, The driver megasr .ko works fine with the installed kernel but I cannot find on for the updated kernel, any adive would be appreciated. without the updated driver there is a kernel panic on boot due to

Greetings, I have a seemingly simple task which I have not been able to solve today and I checked all of the help archives on this and have been unable to find anything useful. I want to construct a symmetric matrix of arbtriray size w/o using loops. The following I thought would do it: p <- 6 Rmat <- diag(p) dat.cor <- rnorm(p*(p-1)/2) Rmat[outer(1:p, 1:p, "<")] <-

Hi, Cool howto, and for protocol would this have that option also? From: dovecot <dovecot-bounces at dovecot.org> On Behalf Of Adrian Minta via dovecot Sent: Thursday, June 20, 2019 18:37 To: dovecot at dovecot.org Subject: Re: LastLogin update Hi, this seems to work very well: https://docs.iredmail.org/track.user.last.login.html You could also add "rip = $rip" in

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and

Greetings, I have a seemingly simple task which I have not been able to solve today. I want to construct a symmetric matrix of arbtriray size w/o using loops. The following I thought would do it: p <- 6 Rmat <- diag(p) dat.cor <- rnorm(p*(p-1)/2) Rmat[outer(1:p, 1:p, "<")] <- Rmat[outer(1:p, 1:p, ">")] <- dat.cor However, the problem is that the matrix

Hi everyone, I have been googling quite a bit and going through the samba documentation looking for something like a banner for a share and nothing came up. I need to setup a public share on a server that is currently running with server security, so I addedd the nobody account to the smbpasswd with null password, but I want to set a banner on the share that let people know this. Is this