similar to: [PATCH] HVM SMBIOS v3 [5/5]

Add code to generate SMBIOS tables to hvmloader. Signed-off-by: Andrew D. Ball <aball@us.ibm.com> diff -r 1d817bfc5ed9 tools/firmware/hvmloader/Makefile --- a/tools/firmware/hvmloader/Makefile Fri Aug 11 14:22:54 2006 +0100 +++ b/tools/firmware/hvmloader/Makefile Fri Aug 11 14:55:18 2006 -0400 @@ -31,7 +31,7 @@ DEFINES =-DDEBUG DEFINES =-DDEBUG XENINC =-I$(XEN_ROOT)/tools/libxc

If anyone is still interested in this old thread, I have a rh7.3 image running under hvm. It''s a hack, but here''s what I did: Install rh7.3 in a vmware machine with vmware server. Booted off a live cd, ( I used a gentoo installer CD, but any live cd should work) Created a lvm volume on my Xen dom0 >From the liveCD, I use dd to copy the disk image to the lvm image (dd

Hello, I''m trying to run a HVM guest with a hard drive > 33.8 GB and it says it works, but as soon as I start writing data to it I get hundreds of: EXT3-fs error (device ide0(3,65)): ext3_new_block: Allocating block in system zone - block = 8257846 and after a few minutes the hard drive corrupts itself (even superblock lost) Looking at the qemu-dm.log file I can see that no

Hello all Xen devels, I''m writing howto''s in brazilian portuguese language about Xen-3.3.0 stubdom, pv-grub and others configurations. Following what is written in xen-3.3.0/stubdom/README, I tried start a HVM but without success. When I start the virtual machine calling ''xm create hvmtest'' command, in a few seconds the virtual machine is dead (see

DELL PE 830 (Intel Pentium D with VT enabled). xen-unstable latest Trying to boot from CDROM and getting following error: (XEN) (GUEST: 1) Start BIOS ... (XEN) (GUEST: 1) Starting emulated 16-bit real-mode: ip=F000:FFF0 (XEN) (GUEST: 1) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 ->

For some reason, half of the patches I posted on Friday for HVM SMBIOS support haven''t shown up yet. I''m going to try to post a version of them reworked for changeset 11076:f328519053f5a444af475ec10dc8089a0b176e3f in a few moments, so please ignore the previous posts. Thanks! Andrew _______________________________________________ Xen-devel mailing list

This patch set mainly allows the user to build a seabios or rombios only version of hvmloader. In addition, when building a seabios only hvmloader, Option ROMs like vgabios and etherboot are no longer required, and therefore can be disabled from the build. Dependency on the bcc compiler can also be avoided the same way. v2: Separate patches for separate issues Introduced config option to

This patch set mainly allows the user to build a seabios or rombios only version of hvmloader. In addition, when building a seabios only hvmloader, Option ROMs like vgabios and etherboot are no longer required, and therefore can be disabled from the build. Dependency on the bcc compiler can also be avoided the same way. v2: Separate patches for separate issues Introduced config option to

When booting HVMs with SeaBIOS, the BIOS itself takes care of extracting option ROMs from the PCI devices. These ROMs are usually provided with by the device model (qemu). Thus, hvmloader should not require any longer the rombios, stdvga, cirrusvga or etherboot ROMs to be present. Also, the 32bitbios_support.c file is specific to rombios and should not be built when building hvmloader with

I am trying to get QNX working with Xen. I''ve going about it in a similar way as installing windows with Xen, but when I start the guest up to install the OS it hangs on the line: ''Hit Esc for .altboot.......'' If anyone has managed to get this working, or has any ideas/advice for me here it would be greatly appreciated! Bryan

These two fixes are the final two outstanding issues in tools/firmware. They are both quite minor. Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -- 1.7.10.4

Attached simple patch modifies the rombios and hvmloader Makefiles to default to an 8-way bochs bios for the hvmloader. Is there a reason to not define the mp config table by default for >1 processors (8), in the repository? Seems like using the hvm guest config file can the methodolody to describe a UP guest regardless of the mptables. Defaulting the rombios to MP would allow users to

We (Michael Fetterman, George Dunlap and I) have been working over the last while on a full replacement for Xen''s shadow pagetable support. This mail contains some design notes, below; a patch against xen-unstable, giving a snapshot of the current state of the new shadow code, is at http://www.cl.cam.ac.uk/~tjd21/shadow2.patch Comments on both are welcome, although the code is not

A "main" function is defined in Xen-3.1.0-source/tools/firmware/hvmloader/hvmloader.c. In this main function, rombios, vgabios and vmxassist are copied to specified address, with following commands memcpy((void *)ROMBIOS_PHYSICAL_ADDRESS, rombios, rombios_sz); ... memcpy((void *)ETHERBOOT_PHYSICAL_ADDRESS, etherboot, sizeof(etherboot)); .... But after searching the whole

ioemu-remote: The device model needs to write in the ACPI tables when it wakes up from S3 state. Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com> -- Jean Guyader _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

I have a self built system using an Intel D 920 processor and a MB that supports VT. I''m able to run HVM domains fine, but have trouble getting multiple VCPUs for these domains. Here is an example of one of my configs. # -*- mode: python; -*- #============================================================================ # Python configuration setup for ''xm create''. #

I am getting the following build break on changeset 13662. I am compiling on x86_64 SLES10 with gcc 4.1.0. Is there a fix for this? Thanks, Aravindh Puthiyaparambil Xen Development Team Unisys, Tredyffrin PA make[1]: Entering directory `/root/xen/xen-unstable.hg/tools/firmware'' make[2]: Entering directory `/root/xen/xen-unstable.hg/tools/firmware/rombios'' gcc -o biossums

Hi, These set of patches are affected by replacing bios_relocate hook with bios_load hook in hvmloader. The patches for code files config.h and hvmloader.c also contains part of the contents of Enabling UEFI BIOS(OVMF) support in Xen-unstable HVM. Is there any problem with these patches? Thank you very much. # HG changeset patch # User gbtju85@gmail.com # Replace bios_relocate hook with

Hello, I read in the announce of Xen 3.2.0 released that it has "preliminary support for a wider range of bootloaders in fully virtualised (HVM) guests, using full emulation of x86 ''real mode''" . I''d like to know what is the level of the emulation of x86 ''real mode''? I ask that because I tried to install OpenSuse 10.3 (I used the iso file

Thank you. I notice the system then jumps to F000:FFF0 to execute. But because VMX is turned on, switching to real-mode would incur problems? I don’t find any clue to turn on the vm86 mode as Readme in the tools/firmware directory puts. Best regards, Hu Jia Yi Ext: 20430 Tel: 65-67510430 -----Original Message----- From: Cui, Dexuan [mailto:dexuan.cui@intel.com] Sent: Thursday,