similar to: domU using dom0 loop interface

I recently noticed that after starting xend ethtool no longer work for my e1000 card. In my 2.X box which is a P4, ethtool is working after xend start. Same version of e1000 on both boxes. The unstable box is a Tyan 2462 SMP, FC4 dom0 The 2.X box is Dell P330 UP, Centos 4.1 domO Until xend start ethtool is fine, in both setups I am using the e1000 as eth0. Regards, Ted

If I try to ifup eth0, I get the following: Device eth0 does not seem to be present, delaying initialization. DomU: Linux fedora1 2.6.16-1.2133_FC5xenU #1 SMP Tue Jun 6 02:58:27 EDT 2006 i686 i686 i386 GNU/Linux config: kernel = "/boot/vmlinuz-2.6-xenU" #ramdisk="/boot/initrd-2.6.16-1.2133_FC5xenU.img" memory = 128 name = "fedora1" #dhcp = "dhcp" disk =

I have a Redhat 8.0 box with many external connections. Several nfs and 3 samba. Today I tried to reattach to one on my mounts and I am geting "Could not resolve mount point /mnt/dir". If I do an ls -a I can see the dir, but when adding the l option to ls it does not show up. fuser returns for the dir, Input/output error I apologize if this has nothing to do with Samba, but I am

thanks for the head up. what os are you running on the blades?? Phillip James System Administrator The Garden City Group, Inc. 105 Maxess Road Melville, NY 11747-3836 Phone: (631) 470-5044 Fax: (631) 940-6561 E-mail: Phillip.James at GardenCityGroup.com ==================================================== This communication (including any attachments) is intended for the use of the intended

Fc4 domO, tyan 2462 SMP xen_changeset : Thu Sep 29 14:59:18 2005 +0100 7f732bba3ed4 domU''s will not start, they try to and hang. Regards, Ted _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Situation peth0 = internet peth1 = local private network Dom0 is only configured to use peth1 and works fine as such I have a DomU setup as a NAT box for the local network to the internet and it is functioning as well. DomU is also running a caching DNS and DHCP for the local network The problem I have is DomO''s gateway is set to the local network IP of the DomU, as is

I am battling an issue with use of bridging with xen. For some yet undetermined reason supposedly relating to stp, they assign a mac address of fe:ff:ff:ff:ff:ff to the bridge. Was hoping someone here may be able to elaborate on that. If I enslave a bridge to an ethernet, and than restart that network interface, should the bridge operation behave the same after the ip interface is restarted?

Hi. I compiled the xen binaries and the kernel with the sources. DomO starts without any problems, but when I run domU, it stops and freeze. My domU is a clone of my domO. ___________________________________________ unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting rtc: IRQ 8 is not free. modprobe: FATAL: Error inserting rtc

Before starting xend (xen 3.0) these are my correct network interfaces: eth0 Link encap:Ethernet HWaddr 00:14:5E:0A:53:04 inet addr:192.168.1.51 Bcast:192.168.1.255 Mask:255.255.255.0 eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 lo Link encap:Local Loopback inet

Hi, I am experiencing a strange network problem. It looks like some packets get lost on the way from frontend network device in domU to the backend vifx.x in dom0. But first my configuration: - Xen 3.4.0 from the gentoo ebuild and the pvops dom0 kernel from jeremy/xen.git - The system has two physical network interfaces called gblan (Gigabit Ethernet) and felan (Fast Ethernet) - Two network

Hello, I see the new Xen packages now really in Sid and even in Lenny on packages.debian.org: http://packages.debian.org/search?keywords=linux-image+xen+amd64&searchon=names&suite=testing&section=all http://packages.debian.org/lenny/xen-linux-system-2.6.26-1-xen-amd64 Does this mean there is now official Xen amb64 and dom0 support in Lenny? I am running it now for a while without

If a PCI device has been passed to a domU is it possible to set its latency from the domU or does it have to be done from the domO? When I attempt to set a devices latency from the domU with setpci I do not receive an error message back indicating a problem, however the latency as viewed with lspci -v is not changed. The same setpci command from the dom0 successfully changes the latency and the

Hi all, I can''t find any good talk about this subject and would like some insights and advices on the cache side in xen. I discovered that a domO power outage can lead to a severe filesystem corruption of the domUs. The domO is a dual disk dell server with a PERC controler in writethrough cache mode, the disk cache is disabled, the scheduler in the domO/domU is NOOP, the domO is holding

I am using dovecot-0.99.14-4.fc4 on FC4, was testing using mbox and than switched to using Maildir. default_mail_env = maildir:~/Maildir >From evolution when I create a folder the folder is created in ~/mail instead of ~/Maildir I am still rather new to dovecot, but this does not make sense. I made sure to restart dovecot, even added a .procmailrc. cat .procmailrc

Is anyone running FC4 SMP domU''s? I don''t recall if I tested this before and today I noticed that I can only bring up FC4 domU''s as UP even though vcpus = 2. xm list and /proc/cpuinfo are in agreement :-) Regards, Ted _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Jerry, Refer to console=hvc0 from (https://wiki.xen.org/wiki/Xen_FAQ_Console)which is dedicated for domO after Xen kernel loaded, so if it hangs it means somewhere the booting process with xen is not right. Suggest you to close look at the dmsg or log for debugging. Hope that helps and cheers. Xlord On Wed, May 17, 2017 at 11:26 AM, Jerry <jerryubi at gmail.com> wrote: > Howdy, >

I get the following warning when running xend start, and a similar warning sometimes when doing xm commands: /usr/lib/python/xen/xend/XendNode.py:26: RuntimeWarning: Python C API version mismatch for module xen.lowlevel.xc: This Python has API version 1012, module xen.lowlevel.xc has version 1011. import xen.lowlevel.xc /usr/lib/python/xen/xend/xenstore/xstransact.py:10: RuntimeWarning:

Hi, I am using xen 3.1.3 on a Celeron, a netbsd 4.0 dom0, and netbsd 4.0 and slackware 11 (with 2.6.18.8-xen kernel) domU''s, and a bridge to communicate between those. I noticed traffic between (both ways) netbsd dom0/domU is rather slow (4Mb/s max), and traffic from the linux domU to dom0 is about 18Mb/s, while traffic from dom0 to the linux domU is rather slow again (4Mb/s max). Any

Hello. Is it available a communication interface between Dom0 and DomU to get some parameteres about DomU without connection via ssh? For example i need to get information about IP addresses that are allocated in DomU. I found following mail-thread: http://xen.1045712.n5.nabble.com/How-to-get-domU-IP-address-td2510278.html Keir Fraser said about xenstore, but as i understand to use xenstore

Hi All, This is very urgent, please help me. I have a redhat machine (2.4.9-e.24) which is acting as a samba server (samba - 2.2.7) Everything was going smoothly until we changes the ip address of our windows machines. Now if i try to connect to the server it gives me the error: "windows cannot find '\\titan". Check the spelling and try again." I have tried connecting by