similar to: RE: Fwd: [Cooker] Re: Configure Xen in Mandrake 10.2 cooker

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

I'm trying to install CentOS 2.1 on SATA drive that lives on ICH7R controller. I have the controller setup in BIOS to "compatibility" mode, which means it should look just like regular IDE controller to the OS. In this mode, ide0 and ide1 are PATA controllers, and 4 SATA ports are mapped to ide2 and ide3. If I boot from the 2.1 installation CD, all the drives are detected

Hi all from last few days i got struct in problem.when i try to use setfacl command "setfacl -m u:himmat:r-- /ide2/asd" i get the error setfacl : /ide2/asd : operation not supported i also has mounted acl using -: "mount -f -o remount,acl / " Note: -f option is for force i am using red hat kernel 2.4.20-8 and acl-2.2.3-1 One more thing i have to ask whether acl utility

Hi, I have read this thread and want to say that I have expirienced the same problem. Once, when I was loged in, one of my filesystems ( root filesystem :( ) became read-only with the same symptoms. But results was more tragic. Almost in each directory avg. 10% of files had incorrect attributes, owner, links, etc. But filenames was correct. So, I was obliged to re-create root filesystem :(

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

I installed a 4.1 x86_64 with kernel 2.6.9-11.ELsmp (rpm) initially. My box is tyan 5350 and a SATA harddisk The install was successful and the harddisk was detected as /dev/sdaX But strangely, when I first reboot my machine. The harddisk change to /dev/hdaX What is the problem ? Below are some of dmesg output hda: WDC WD1200JD-00HBB0, ATA DISK drive Probing IDE interface ide1... Probing IDE

Sir or Madam, I am in a new project writing software for embedded apps. We use a single board computer consisting of (a) linux (b) syslinux boot loader (c) compact flash file system (d) x86 processor. (see www.embeddedx86.com) (e) other HW and SW. Using vendor provided files, I can easily prepare a compact flash (CF) system which boots 2.4.23 linux just fine. I can telnet in and so on and so

Would the following be symptoms of hardware problems or just a corrupt fs? Will fsck tonight when a new power supply is going into the machine. Kernel: 2.4.17 Drive: Maxtor D740X-6L 80GB connected via HPT366 Feb 25 21:26:33 viper kernel: hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } Feb 25 21:26:33 viper kernel: hde: dma_intr: error=0x40 { UncorrectableError },

I get a message while booting of: ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports already in use, skipping probe Googling for this, I find it is relatively common, and on different laptops. I thought it might be my internal SD reader causing the problems, but these other notebooks do not have such devices. Then I found: http://www.cl.cam.ac.uk/~pb22/I8600/ and: " IrDA -

I have seen this posted around the list a few times, but have never found my exact error or even a solution to this. I was getting this error every few seconds...... After moving the card to a different PCI slot and turning off some devices that are not needed. I was able to get the messages down to about every 10 minutes and the T1 card now is sitting in it's own intterupt. Apr 25 23:49:15

I've been running Asterisk for months with no problems. I have grown to the point where I need an aditional TE cards. After many attempts I was able to add the second card without affecting the performance of the first. However, the second card is not working properly. Setup ===== - Running on a Dell Server. - RedHat 8 - Asterisk 1.0 - I have two TE410Ps on that box, card 0 assigned to

Hi, First, let me thank you for the excellent documentation and programming work on Syslinux. It has made getting to this point infinitely easier. Unfortunately, I need to request some guidance in troubleshooting a problem I am having using the RedHat installer on their version 7.3, which uses Syslinux as the boot mechanism. A little background: I have an old Micron Powerdigm XsU dual PII

Hi Everybody, I''m a using xen for my first time in a debian sarge using the testing repository of Xen. I have the following problem: When boot with kernel 2.6.11-ksxen0, after a day or some running, the X crash and then the machine reboots. Will it''s running i''m seeing this erros on dmesg: [drm:i830_wait_ring] *ERROR* space: 131056 wanted 131064 [drm:i830_wait_ring]

UPDATE. The circuit has run clean since the 7th. It seems the telco found a problem after all but they can't tell me what they did... cause they think it was fixed as part of another case. Grrr. Well, I never doubted the T400P too much but I went ahead and bought a different card just in case. Haven't had to use it so far. One of the biggest reasons I did not think the Wildcard was at

I strongly suspect that going to the CentosPlus Kernel would be good for my notebook: Not having NTFS support is making moving files from my XP drive to my Linux drive a pain. Suspend is not working. Rather I suspend and never get out of it! My notebook has an internal SD reader that is not recognized. I notice on boot a message that: ide2: I/O resource 0x3EE-0x3EE not free. ide2: ports

At the risk of angering the crash Gods, my sustem has NOT crashed again since I downgraded the kernel from 2.6.18-1.2239.fc5 to 2.6.18-1.2200.fc5. Given that newfound stability, and my lack of time, I'm going to put on hold any further diagnostics, until the next kernel revision is released. I have submitted a report at bugzilla.redhat.com (bug 218128). (Ah, nuts; accidentally created a

Hi, One of my pbx's seems to be having some new issues. crackling interference on the zap channels running through the channel bank, and I noticed that these happen when I hit an "irq miss" in zttool: Current Alarms: No alarms. Sync Source: Digium Wildcard T100P T1/PRI C IRQ Misses: 82695 Bipolar Viol: 0 Tx/Rx Levels: 0/8 3 Total/Conf/Act:

Hi, Apologies, this is going to be quite long - I'm going to provide as much info as possible. I'm running a system with ext3 fs on software RAID. The RAID set-up is as shown below: jlm@nijinsky:~$ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 96256 blocks [2/2] [UU] md5 : active raid1 hdk1[1] hde1[0]

i too am an idiot.. and request help here's the sccop i originally formatted the drive with 3 partitions and installed rh8 /boot / swap everything worked. my plan was to have this drive only be a data drive so i inatlled rh8 on another drive and mounted this one on /share so /share looked like /share /bin /sbin /mp3 /usr /etc /dev and so on so i deleted all the

Hello All, I am getting a set of errors when I boot Asterisk that I have not been able to solve. What is causing these error(s)? Asterisk boot output: ============== Asterisk CVS-04/10/04-21:44:51, Copyright (C) 1999-2001 Linux Support Services, Inc. Written by Mark Spencer <markster@linux-support.net> ========================================================================= [