similar to: Disk IDs and DD

I''m looking at the newly-orderable (via Sun) STEC Zeus SSDs, and they''re outrageously priced. http://www.stec-inc.com/product/zeusssd.php I just looked at the Intel X25-E series, and they look comparable in performance. At about 20% of the cost. http://www.intel.com/design/flash/nand/extreme/index.htm Can anyone enlighten me as to any possible difference between an STEC

Hey all, I''m not sure if this is a ZFS bug or a hardware issue I''m having - any pointers would be great! Following contents include: - high-level info about my system - my first thought to debugging this - stack trace - format output - zpool status output - dmesg output High-Level Info About My System --------------------------------------------- - fresh

After having massive problems with a supermicro X7DBE box using AOC-SAT2-MV8 Marvell controllers and opensolaris snv79 (same as described here: http://sunsolve.sun.com/search/document.do?assetkey=1-66-233341-1) we just start over using new hardware and opensolaris 2008.05 upgraded to snv94. We used again a supermicro X7DBE but now with two LSI SAS3081E SAS controllers. And guess what? Now we get

My setup: A SuperMicro 24-drive chassis with Intel dual-processor motherboard, three LSI SAS3081E controllers, and 24 SATA 2TB hard drives, divided into three pools with each pool a single eight-disk RAID-Z2. (Boot is an SSD connected to motherboard SATA.) This morning I got a cheerful email from my monitoring script: "Zchecker has discovered a problem on bigdawg." The full output is

Hi I keep getting these messages on this one box. There are issues with at least one of the drives in it, but since there are some 80 drives in it, that''s not really an issue. I just want to know, if anyone knows, what this kernel message mean. Anyone? Feb 5 19:35:57 prv-backup scsi: [ID 365881 kern.info] /pci at 7a,0/pci8086,340e at 7/pci1000,3140 at 0 (mpt1): Feb 5 19:35:57

Dear All, It may be this not the correct mailing list, but I''m having a ZFS issue when a disk is failing. The system is a supermicro motherboard X8DTH-6F in a 4U chassis (SC847E1-R1400LPB) and an external SAS2 JBOD (SC847E16-RJBOD1). It makes a system with a total of 4 backplanes (2x SAS + 2x SAS2) each of them connected to a 4 different HBA (2x LSI 3081E-R (1068 chip) + 2x LSI

Hi! I tried to add an other FiweFire Drive to my existing four devices but it turned out, that the OpenSolaris IEEE1394 support doen''t seem to be well-engineered. After not recognizing the new device and exporting and importing the existing zpool, I get this zpool status: pool: tank state: DEGRADED status: One or more devices could not be used because the label is missing or

Hello I have a strange issue, I''m having a setup with 24 disk enclosure connected with LSI3801-R. I created two pools. Pool have 24 healthy disks. I disabled LUN persistency on the LSI adapter. When I cold boot the server (power off by pulling all power cables), a warning is shown on the console during boot: .... WARNING: /pci/path/ ... (mpt0): wwn for traget has changed

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on

At the moment I'm prototyping an advanced ENUM application with PHP fetched from LDAP. When a user enters a full hostname as SIP adress I get loop problems from the AGI EXECUTE DIAL and from a Dial in the extension.conf. -- Executing AGI("SIP/1000-c3c3", "enum.php") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/enum.php enum.php: 123 enum.php:

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

Hi, Yesterday I got all my disks in two zpool disconected. They are not real disks - LUNS from StorageTek 2530 array. What could that be - a failing LSI card or a mpt driver in 2009.06? After reboot got four disks in FAILED state - zpool clear fixed things with resilvering. Here is how it started (/var/adm/messages) Feb 23 12:39:03 nexus scsi: [ID 365881 kern.info] /pci at 0,0/pci10de,5d at

Hello! I''am setup zfs / cifs home storage server, end now have low performance with play movie stored on this zfs from windows client. server hardware is not new , but n windows it perfomance was normal. CPU is AMD Athlon Burton Thunderbird 2500, runing on 1,7GHz, 1024 RAM and storage: usb c4t0d0 ST332062-0A-3.AA-298.09GB /pci at 0,0/pci1458,5004 at 2,2/cdrom at 1/disk at

I''m curious about if there are any potential problems with using LVM metadevices as ZFS zpool targets. I have a couple of situations where using a device directly by ZFS causes errors on the console about "Bus and lots of "stalled" I/O. But as soon as I wrap that device inside an LVM metadevice and then use it in the ZFS zpool things work perfectly fine and smoothly (no

i''ve got a little zpool with a naughty raidz vdev that won''t take a replacement that as far as i can tell should be adequate. a history: this could well be some bizarro edge case, as the pool doesn''t have the cleanest lineage. initial creation happened on NexentaCP inside vmware in linux. i had given the virtual machine raw device access to 4 500gb drives and 1 ~200gb

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

I''m not sure exactly what happened with my box here, but something caused a hiccup on multiple sata disks... May 9 16:40:33 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5c at 9/pci-ide at a/ide at 0 (ata6): May 9 16:47:43 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci-ide at 7/ide at 1 (ata3): May 9 16:47:43 sol timeout: abort request, target=0

Hi all I''m seeing some rather bad resilver times for a pool of WD Green drives (I know, bad drives, but leave that). Does resilver go through the whole pool or just the VDEV in question? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres

Hi all I have this server with some 50TB disk space. It originally had 30TB on WD Greens, was filled quite full, and another storage chassis was added. Now, space problem gone, fine, but what about speed? Three of the VDEVs are quite full, as indicated below. VDEV #3 (the one with the spare active) just spent some 72 hours resilvering a 2TB drive. Now, those green drives suck quite hard, but not