similar to: XCP bandwidth management

Hello Everyone, I am new with XCP. I''ve setup several hosts with* XCP 1.0* and manage it through XenCenter and command console. Each host has two NICs, one (xenbr0) connected to a physical switch for Internet (said sw1), the other (xenbr3) connected to a physical switch for internal network (said sw2). I am trying to setup VMs and VLANs on xenbr3. I created a virtual bridge by

Hi All, I tried again with XAPI on Debian last night and this time things went far smoother... I managed to boot into the Xen kernel, xe is working and the XAPI daemon appears to be running. However, I am having trouble connecting to XAPI from XenCenter... it just says the connection was refused without any meaningful errors and nothing in the logs on either side. I can ping the Xen machine from

Hello, I am using XCP 1.0 and am accessing it with XenCenter. I have three NIC''s and I have bonded two of them through the XenCenter frontend. I then create a VLAN using XenCenter and attach it to the bond0. I create a VM and create its NIC to use VLAN 10, which it does and when the VM boots the NIC shows Active inside of XenCenter. When I look at the XCP host it shows VLAN 10 as an

Dear Debian maintainer, The Debian internationalisation team and the Debian English localisation team will soon begin the review of the debconf templates used in xen-api. This review takes place for all packages that use debconf to interact with users and its aims are: - to improve the use of English in all debconf templates; - to make the wording of debconf templates more consistent; - to

Hi Guy, I am trying to figure out how & where can i get the bandwidth usage utilization statistic info for all the VM, so in the end i will be able to use it for metering purpose.. Anyone got any idea ? Regards, Peter -------------- next part -------------- An HTML attachment was scrubbed... URL:

*Hi all,* *I am very new to XCP and I have some questions:* *1. can i use Xencenter to manage XCP host?* *2.**I saw the XCP 1.5 feature:Open vSwitch is now the default networking stack. **does that mean i can create **cross-server private network and **virtual networking policies with vswitch controller? where i can get this tool?* * * *Thanks in advance[?], * *Heuye* * * * *

Dear all, How to make XCP cannot management by XenCenter? We have an environment about 10 XCP host, and provide about 50 vm for users, We notice that some users want to use XenCenter to connect the XCP host, even they don’t have password, so we want to make XCP cannot use XenCenter and only for console management, is it possible? Sorry for the strange question,

Hi all, today i tried to enable HA on xcp 1.6 but when i enable it through xencenter I received the following error in xensource.log: Dec 5 17:56:26 xcp1 xapi: [ info|xcp1|490661|Async.pool.enable_ha R:9119ce88ffcb|xapi_ha] Using statefile: /etc/xensource/static-vdis/0/disk Dec 5 17:56:26 xcp1 xapi: [debug|xcp1|490661|Async.pool.enable_ha R:9119ce88ffcb|xapi_ha]

XCP Users: As many of you are aware, there are several open source products available for everyone to use when working with XCP. I would like to get some feedback on the various tools to get a feeling on how people are using XCP and these tools. Here are the tools that I am aware of (please respond if you are using another tool): * OpenXenManager -

Thanks for all the help... XVP seems quite high on requirements. Like it needs an SMTP server set up. I''m not sure I like that. I found a tool called BixData, it''s proprietary but with a free license for a limited number of managed servers. Being a fully fledged cloud management system, it''s true overkill for me and my 3-4 virtual machines, but at least it seems quite

I have two hosts as Xen Server named host A and host B in the same network. A VM is created on Host A. Host A and B have a shared storage using NFS. While doing migration from host A to host B, how can I see the memory pages being migrated. If I run a small continuous program on the VM residing on host A, will the migration complete first or the sript running will complete first? How can I see

New build with Ubuntu 13.04 and Xen 4.2. Installed XCP-XAPI as the plan was to use XenCenter to manage the installation. I pretty much followed this guide here: https://help.ubuntu.com/community/Setting%20up%20Xen%20and%20XAPI%20(XenAPI)%20on%20Ubuntu%20Server%2012.04%20LTS%20and%20Managing%20it%20With%20Citrix%20XenCenter%20or%20OpenXenManager With a few changes for things that have been fixed

Hi everyone! I have 2 hosts + 1 ISCSI device. I want to create a shared storage repository and both hosts use together. I wont use NFS. prepared sr: xe sr-create host-uuid=xxx content-type=user name-label=NAS1 shared=true type=iscsi device-config:target=xxxx device-config:targetIQN=xxxx hosts see the iscsi device: scsi4 : iSCSI Initiator over TCP/IP scsi 4:0:0:0: Direct-Access NAS

I just noticed OpenXenCenter (aka OpenXenManager) that is an open source replacement for Citrix's XenCenter. This tool works with XenServer. But as per the blog entry: http://blog.xen.org/index.php/2010/02/09/xen-cloud-platform-installation/ it is also supposed to work with Xen Cloud Platform. XCP is licensed GPL2 and is a combination of multiple packages. Has the team looked at the

Hi, In XenServer5.6 FP1 beta, I have switched default bridge to open vswitch, I wonder how to use "xe tunnel-create" to create a GRE tunnel. my commands: xe tunnel-create pif-uuid=eth0_uuid network-uuid=network_created_by_xe_network_create then I got an uuid which is "access-PIF" of output from "xe tunnel-list". what should I do next? how to set remote_ip

Hello, I have been playing with the XCP for a while now, and must say I''m very exited about the technology. I had no prior experience with Xen so it has taken me a while to understand the concepts, but now I feel most important issues are solved and I''ve purchased some hardware to build my (tiny) cloud on. The box is a Supermicro 1026TT-IBXF, so I have 2 x Ethernet and 1 x

Hi, everyone. I''m Guilherme Suzuki (brazillian, by the way) and really interested in xen-vga-passthru. Lately, I bought a brand new Saphire HD 7950 (OC Boost) because I saw in a wiki somewhere that users have been able to passthru these VGA devices to domU (win7, win-xp and so on). But, after I installed it, I executed *lspci -vv* to check if FLR in DevCap was present (which

Hi list, I have recently migrated to XCP from Vmware Server 2 and have run into issues importing the VM''s Following citrix''s guide I tried using XenCenter to do the import directly on the vmdk files this resulted in XenCenter logging this error: "Failed to import. ---> System.Exception: Failed to import virtual disk file. ---> System.Xml.XmlException: Root element

Hi, I''ve trying booting Xen Hypervisor PV with a centos5 template using kernel and initrd from mirror.centos.org/centos/5/os/i386. When i start PV this go to installation mode. However this should boot with template. Please help in this regard what Am i doing wrong. -- Best Regards Asim _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org

Hi, I am a newb to XCP and somewhat to Linux. I set up XCP on a test machine and used xe to configure a couple of VMs. The VMs are working fine but if I deploy XCP with only xe to manage machines, the others here will want my head on a plate. I set up a Fedora client on a different machine and installed Virtual Machine Manager. When trying to connect via SSH, I get an error that says