similar to: XCP jumbo frames in vm

Hello, A user (cc'd) reported that nouveau's enabling of MSI causes the card to not work on his setup [1]. I think the situation is that MSI is just not supported by the underlying motherboard, even though the card, and probably bridge, support it just fine. It's a very old board. The nouveau code does: pmc->use_msi = pci_enable_msi(device->pdev) == 0; Does it need to do more

I mistakenly only replied to Yijing Wang the first time. Here are the further details. uname -a: Linux p5-133 3.15.2-p5-133 #1 Thu Jun 26 22:56:27 EDT 2014 i586 GNU/Linux Here is the output from lspci -vvvxxx: root at p5-133:~# cat lspci.txt 00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-

*RESEND* due to exceeding the mailinglists limit for attachment size. Hi, I''m trying to get secondary vga-passthrough on a HVM guest to work with a AMD HD6570 and the native kernel radeon driver and kernel modesetting. So the guest still gets the emulated stdvga or cirrus device(used in my case here) as primary/boot vga adapter. - When i don''t passthrough the radeon card, the

Yijing, cat /sys/bus/pci/devices/0000\:00\:0e.0/msi_bus returns 1, suggesting that it supports MSI. However, this "00:0e.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)" is a component of the addin card. Wouldn't the lack of support for MSI by the chipset "00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01)"

On Thu, Jul 3, 2014 at 10:35 PM, Yijing Wang <wangyijing at huawei.com> wrote: > Hi Brian, > From your 01:00.0 VGA compatible controller PCI config register, it supports 1 MSI vector, so I think this > card has no problem. But you didn't answer what's the pci_enable_msi() return during it enable MSI fail. > > You can check PCI bus whether support MSI like: > >

I tried to install and boot a 2.6.7 Dom0 xenLinux Kernel on an SMP (Dual-Xeon) Machine with 2 3-ware Controllers installed (1 4-channel Controler and 1 8-channel Controler, both Parallel ATA) and no other HDs present (except the ones connected to the 3ware controlers, of course). First of all I got a compilation error after activating the SMP option in the kernel config. After deactivating the

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Is there anything I can do in this regard? /smo On 2016-03-31 23:12, Pierre Moreau wrote: > Oh, hum, GM108 is NV118 and not NV108 which is Gk208… My bad! > > SMF from the bug report seemed to have some working setup, and since he didn't > pinged back, I guess it's working nicely. But some more checking might still be > needed? > > On 04:59 PM - Mar 31 2016, Ilia

Hi, I'm new to asterisk, in order to enable X-lite to make a call, what should i do before making a call? Current stage, 1. i have create a few accounts in sip.conf. 2. Registration are successful. Pls advice me how to continue then... Thanks _________________________________________________________________ Personalize your Live.com homepage with the news, weather, and photos you

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I have a *very* strange problem, unfortunately it's kind of a show stopper regarding the deployment of the machine. :( I have two Intel Gigabit Ethernet NICs on board (Supermicro-based Server), quoting lspci (full output see at the end of the email): 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller

Greetings, I am resending this as it doesn't appear in the archives and no one responded...maybe it got routed to /dev/null or something :-) I have asked this question the Scientific Linux mailing list (a few months ago) and got the suggestion I talk to the kernel guys. I pinged a kernel guy I know, and his suggestion was to ask the Nouveau list. So here I am. :-) I have had my work laptop

Hi, It would seem like it (attachments are from 4.9-rc1, btw), but it doesn't look like there is any support in the Xorg driver. How can I help with that? Best regards, Sune Mølgaard Translucent ApS On 2016-04-22 09:33, Pierre Moreau wrote: > Hello, > > A patch was merged yesterday to recognise GM108 (see >

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

Hey hope this opne is a "make senser". Has anyone tried the "Subject line" combo?, I''ve compiled a dozen src.rpm kernel 3.0 and 3.1 packages with no luck to try native upstream Dom0 kernel support with no success, just a kernel oops and constant reboots. I followed Fedora''s wiki on building a custom kernel, even used F16''s .config which also was a

Hi (Armin)! Does someone knows how to identify the type of the card? The delivery note says it is a V-4BRI-8M, whereas lspci reports a 4BRI-8M. What is it really? Are there any Eicon tools to identify the card type? thanks klaus 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2 (rev 01) Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev

Hi again, It works :-) Reclocking, however, is another kettle of fish. Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. Trying the same with no X running reveals: Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: clk: unable to find matching pll values a number of time as then soft lockup. Very much akin to

Hi, With drm-next from http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-next/2016-12-08/ I don't get the error messages, but I still get a soft cpu lockup. What info would you need from me to get it working? Best regards, Sune Mølgaard On 2016-12-08 08:10, Karol Herbst wrote: > hi, > > give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with

Aha! That seems to do it. If I interpret correctly, it doesn't set it quite to full power, though, but it's certainly an improvement: 07: core 405 MHz memory 810 MHz 0a: core 270-1124 MHz memory 1600 MHz 0f: core 270-1124 MHz memory 2002 MHz AC DC * AC: core 1012 MHz memory 2002 MHz A short run of glmark2 shows aver 100% improvement to ~550 FPS. Interestingly, it's still nowhere