similar to: Monitoring hardware in Domain-0 - core temperature specifically

Hi, I just got two new UPS's - GE EP6000R. These have both RS232 and USB connection. As far as I could detect these are not supported by NUT. However, they provide some Linux software and as long as these UPS's are not in production (another week or so) I could 'play' with them to try to get some protocol information. Though I would need some pointers on how to do it... Mind you

Got a problem after upgrading Samba from 3.0 to 3.5 - have a bunch of users and groups in LDAP and things work for the most part. However, when people try to change permissions from within Windows, some usernames or groupnames are shown properly, but other are not - they see the SID. Following up I noticed, that I can get a list of all users with 'wbinfo -u' and that I can get a SID for

Device manufacturer: GE Digital Energy (http://www.gedigitalenergy.com/powerquality/catalog/rackmountnet.htm) Device name: GE EP6000R (http://www.gedigitalenergy.com/powerquality/catalog/rackmountnet.htm) *upsc:* * battery.voltage: 272.40 * battery.voltage.nominal: 240.0 * beeper.status: disabled * device.type: ups * driver.name: blazer_usb * driver.parameter.bus: 004

Hi, recently I got a GE EP6000R UPS. At first I feared it's not supported at all, but after digging in I found out that it's supported by the 'blazer' driver. The UPS has both RS232 and USB connection. To use the RS232 connection, I had to use the 'cablepower = none' as the UPS is using only RX, TX and GND pins. So my 'usp.conf' was a bit like that: > [myups]

Here is my setup. samba+winbind on OpenSuse 11.3 (samba 3.5.4). Using winbind to auth to another samba+ldap server. Authentication works until first failed login: host:~ # wbinfo -a prod\\user%goodpass plaintext password authentication succeeded challenge/response password authentication succeeded host:~ # wbinfo -a prod\\user%badpass plaintext password authentication failed Could not

Hello Everyone! Been looking around the internet but have not found a solution for my problem yet, all i found was a report on opensuse forums with no replays. I have a Xen dom0 running on OpenSuse 11.4 x86_64, on this I’ve created 3 PV instances all running OpenSuse 11.4 x86_64 as well. All 3 PVs were installed the same way with the same package selection and only ONE of this 3 PVs hangs at

Ne mo?ete pro?itati e-mail? Pro?itajte ga ovdje. ( http://www.chm.hr/index.php?option=com_acymailing&ctrl=archive&task=view&mailid=11&key=3PJdxoTH&subid=276400-g7yNcKB2N6CESr&tmpl=component ) Kolovoz 2015 | www.chm.hr ( http://www.chm.hr ) | Tel.: +385 (0) 95 504 30 74 | Odr?avanje ( http://www.chm.hr/odrzavanje/cjelogodisnje-odrzavanje-objekata ) ?i??enje (

-25% popusta + besplatna dostava KLIK Pogledajte ovu poruku online, ako se ovdje ne prikazuje pravilno. Telefon: 091 900 5540 HP ? Canon ? Samsung ? Epson ? Brother ? Kyocera ? Konica ? Minolta ? Xerox Kodu za 25% popusta upi?ite na zavr?etku postupka narud?be. Koda: PROLJE?E15 Koda za popust vrijedi do 14.4.2015 Besplatna dostava za sve narud?be ! Potrebna vam je pomo??

Suppose I have the following list: a <- strsplit(c("John;Smith", "Jane;Doe", "koda", "gunner"), ";") I want to get to these two vectors without looping... firstNames: c("John", "Jane", "koda", "gunner") lastNames: c("Jane", "Doe", NA, NA) Thanks cn [[alternative HTML

I'm having an odd example of shared list. When I look at local network and workgroup under Windows 95 or 98 I see users personal directory and common share. But when i look at workgroup on Windows 2000 i see duplicated shares. Once as "HOMES" share an once as "USERNAME" share. Can i somehow change this ? My smb.conf file is enclosed. Thanks ! [global] client code

I tried making my own repo with just the groups in them and I got an error.... I used: #createrepo -g /root/mygroups.xml /root/myrepo Saving Primary metadata Saving file lists metadata Saving other metadata Generating sqlite DBs Sqlite DBs complete Where /root/mygroup.xml is attached below. Then I made: cat > /etc/yum.repos.d/myrepo.repo << EOF [myrepo] name=My repo for armhfp

BODY { font-family:Arial, Helvetica, sans-serif;font-size:12px; } Dear All, I am trying to use the virt-manager to install Xen Guest OS. I got the virt-manager installed and running on fc7 xen dom0 and am trying to install fc9 domU using virt-manager. I have only been able to find the install URL for fc9 (all other links fc6, fc7 etc does not work), but this URL doesnot complete the

Hi All, I've been banging my head on a small dundi problem... I have two * servers setup, both have almost identical dundi.conf files: root@tsjonge:/opt/asterisk/etc# cat dundi.conf [general] department=thuis organization=pipsworld locality=Amsterdam stateprov=NH country=NL email=remco@pipsworld.nl phone=+31207508308 ;bindaddr=0.0.0.0 ;port=4520 entity=00:02:b3:49:69:5e ttl=16

Well, I've been dicking around with DUNDi for about 4 hours now. I have two systems that I am trying to get to peer with each other. Queries are working one way, but not the other. The server, pbx1, that is refusing to deliver any queries and logs what's below to the console. Why??? I've checked all the config files more times than I can remember. The 'RFC' for DUNDi at

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

Following the posting by spd@gtc1.cps.unizar.es (J.A. Gutierrez) in SAMBA digest 1482 I compiled samba-1.9.17p4 under Irix 6.2 using the -fullwarn flag. There are around 2000 lines of warnings and messages - quite a few are due to 64 bit file systems but there are unused variables, missing prototypes, etc as well. For example: mode_t != int elements of struct statvfs are unsigned long, rather

Hello I am looking for a function to create an Integrated (I) spline basis, somehting similar to the likes of 'bs' and 'ns'. I have come across the funcitons, fda::eval.monfd Values of a Monotone Functional Data Object fda::/.fd FDA internal functions fda::monfn Evaluates a monotone function fda::smooth.monotone Monotone

Hi guys In our implementation of Xapian for one of our sites, we index the title, subtitle, summary and table of contents of around 200,000 products on ReportBuyer.com. When we create each Xapian doc to index this information, we apply a weighting to each of these 'fields' and add these to the doc using index_text with the second parameter passing in a weighting. I've been asked if

Hello all, We just started to look at how we could use LLVM to secure ARM-based mobile system from malware like overriding pointers to system functions and causing memory overflow. I'm wondering how the current ARM backend work on the current LLVM release. Does it have any support for ARM system-level instructions to change the page tables or switching tasks? I appreciate your help and

Thanks, Eli. Also, I wonder specifically if the structure alignment and code padding in the system code works with ARM backend without any problem, so LLVM behaves the same as gcc. Won On Tue, Jun 2, 2009 at 11:58 AM, Won J Jeon<wjjeon at gmail.com<http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>> wrote: >* Hello all, *>* *>* We just started to look at how we could use