similar to: add device to mirror rpool in sol11exp

I am getting the following error, however as you can see below this is a SMI label... cannot set property for ''rpool'': property ''bootfs'' not supported on EFI labeled devices # zpool get bootfs rpool NAME PROPERTY VALUE SOURCE rpool bootfs - default # zpool set bootfs=rpool/ROOT/s10s_u8wos_08a rpool cannot set property for ''rpool'': property

All, The attached script is causing the following error message ... bash-3.00# ./zmon_bug.d dtrace: error on enabled probe ID 2 (ID 4394: fbt:genunix:copen:entry): invalid address (0xfd91747f) in predicate at DIF offset 120 dtrace: error on enabled probe ID 2 (ID 4394: fbt:genunix:copen:entry): invalid address (0xfef81a3f) in predicate at DIF offset 120 Any ideas? thxs Joe --

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Experts, I''m installing Oracle 9i on Solaris 10 11/06(update 3),I created some zfs volumes which will be used by oracle data file,as: # zfs create -V 200m ora_pool/controlfile01_200m # zfs create -V 800m ora_pool/system_800m ... # ls -l /dev/zvol/rdsk/ora_pool lrwxrwxrwx 1 root root 39 Apr 11 12:23 controlfile01_200m -> ../../../../devices/pseudo/zfs at 0:1c,raw

Team, **Please respond to me and my coworker listed in the Cc, since neither one of us are on this alias** QUICK PROBLEM DESCRIPTION: Cu created a dataset which contains all the zvols for a particular zone. The zone is then given access to all the zvols in the dataset using a match statement in the zoneconfig (see long problem description for details). After the initial boot of the zone

I have a system that I''m trying to bring up with a mirrored rpool. I''m using DarkStar''s ZFS Root Mirror blog post as a guide (http://darkstar-solaris.blogspot.com/2008/09/zfs-root-mirror.html). When I get to step 3 I execute: pfexec prtvtoc /dev/rdsk/c7d0s2 | fmthard -s - /dev/rdsk/c7d1s2 I get: fmthard: Cannot open device /dev/rdsk/c7d1s2 - Permission denied Any

The `lofiadm'' man page describes how to export a file as a block device and then use `mkfs -F pcfs'' to create a FAT filesystem on it. Can''t I do the same thing by first creating a zvol and then creating a FAT filesystem on it? Nothing I''ve tried seems to work. Isn''t the zvol just another block device? -- -Gary Mills- -Unix Group-

Well this is a new one.... Illumos/Openindiana let me add a device as a hot spare that evidently has a different sector alignment than all of the other drives in the array. So now I''m at the point that I /need/ a hot spare and it doesn''t look like I have it. And, worse, the other spares I have are all the same model as said hot spare. Is there anything I can do with this or

Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i? On this page: http://docs.avagotech.com/docs/12351997 there is a curious note on the left that reads: "Integrated MegaRAID support available upon request" After one mostly fruitless round of chatting with LSI/Avago/Broadcom and one completely fruitless round of chatting

OK, I''ve been putting off this question for a while now, but it eating at me, so I can''t hold off any more. I have a nice 8 gig memory stick I''ve formated with the ZFS file system. Works great on all my Solaris PC''s, but refuses to work on my Sparc processor. So I''ve formated it on my Sparc machine (Blade 2500), works great there now, but not on

On 1/30/2015 1:53 AM, Gordon Messmer wrote: > On 01/29/2015 05:07 AM, Jatin Davey wrote: >> Yes , it is a SATA disk. I am not sure of the speed. Can you tell me >> how to find out this information ? Additionally we are using RAID 10 >> configuration with 4 disks. > > What RAID controller are you using? > > # lspci | grep RAID [Jatin] [root at localhost ~]# lspci |

Under Solaris 10 on a 4 core Sun Ultra 40 with 20GB RAM, I am setting up a Sun StorageTek 2540 with 12 300GB 15K RPM SAS drives and connected via load-shared 4Gbit FC links. This week I have tried many different configurations, using firmware managed RAID, ZFS managed RAID, and with the controller cache enabled or disabled. My objective is to obtain the best single-file write performance.

OK, I''ve got a proble I can''t solve by myself. I''ve installed solaris 11 using just one drive. Now I want to create a mirror by attached a second one tot the rpool. However, the first one has NO partition 9 but the second one does. This way the sizes differ if I create a partiotion 0 (needed because it''s a boot disk).. How can I get the second disk look

Hi, in preparation to try zfs boot on sparc I installed all recent patches incl. feature patches comming from s10s_u3wos_10 and after reboot finally 137137-09 (still having everything on UFS). Now it doesn''t boot at anymore: ############################### Sun Fire V240, No Keyboard Copyright 2006 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.23, 2048 MB memory installed,

Folks, I am learning more about zfs storage. It appears, zfs pool can be created on a raw disk. There is no need to create any partitions, etc. on the disk. Does this mean there is no need to run "format" on a raw disk? I have added a new disk to my system. It shows up as /dev/rdsk/c8t1d0s0. Do I need to format it before I convert it to zfs storage? Or, can I simply use it as: # zfs

Hi, as Richard Elling wrote earlier: "For more background, low-cost SSDs intended for the boot market are perfect candidates. Take a X-25V @ 40GB and use 15-20 GB for root and the rest for an L2ARC. For small form factor machines or machines with max capacity of 8GB of RAM (a typical home system) this can make a pleasant improvement over a HDD-only implementation." For the upcoming

On Thursday 02 November 2017 14:10:25 Bowie Bailey wrote: > If you want raid 5 or 6, then you should get a hardware controller. For > raid 1, mdadm should work just fine.? I would suggest trying it before > buying a raid controller.? If it works for you, you save a few hundred > dollars and you have one less piece of hardware to worry about. > > I haven't looked at them in

Hey, I have a portable harddisk Western Digital 120GB USB. Im running Nevada b42a on Thinkpad T43. Is this a supported configuration for setting up ZFS on portable disks ? Found out some old blogs about this topic: http://blogs.sun.com/roller/page/artem?entry=zfs_on_the_go and some other info under: http://www.sun.com/io_technologies/USB-Faq.html Is this information still valid ? Under ZFS FAQ

Hi All, ZPOOL / ZFS commands writes EFI label on a device if we create ZPOOL/ZFS fs on it. Is it true ? I formatted a device with VTOC lable and I created a ZFS file system on it. Now which label the ZFS device has ? is it old VTOC or EFI ? After creating the ZFS file system on a VTOC labeled disk, I am seeing the following warning messages. Feb 3 07:47:00 scoobyb

Hello Peter, The attached patch contains three small (although 2 of them are fundamental :) fixes for pxelinux 1. Alignment error when more than one initramfs are loaded using initrd - the alignment of the last disk is discarded in calculations but is ALWAYS present when the loading procedure is called. As a result - the second image (cpio) is not recognized. 2. On some platforms