similar to: ZFS and FM(A)

I am running XCP 0.5. I have an InfiniBand network in place that I would like to use to connect to my NFS server for VM image storage. Has anybody tried getting IB to work with XCP? Is there a document that outlines the steps for getting IB to work with XCP? Also, I don''t need to expose the IB network to any of the domU. I only want to use the IB network to connecting to NFS based

Hi, I know (from the zfs-discuss archives and other places [1,2,3,4]) that a lot of people are looking to use zfs as a storage server in the 10-100TB range. I''m in the same boat, but I''ve found that hardware choice is the biggest issue. I''m struggling to find something which will work nicely under solaris and which meets my expectations in terms of hardware.

Hi all I have installed a new server with 77 2TB drives in 11 7-drive RAIDz2 VDEVs, all on WD Black drives. Now, it seems two of these drives were bad, one of them had a bunch of errors, the other was very slow. After zfs offlining these and then zfs replacing them with online spares, resilver ended and I thought it''d be ok. Appearently not. Albeit the resilver succeeds, the pool status

So, my Areca controller has been complaining via email of read errors for a couple days on SATA channel 8. The disk finally gave up last night at 17:40. I got to say I really appreciate the Areca controller taking such good care of me. For some reason, I wasn''t able to log into the server last night or in the morning, probably because my home dir was on the zpool with the failed disk

Hello, I am curious to know if there is an easy way to guess or identify the device names of disks. Previously the /dev/dsk/c0t0d0s0 system made sense to me... I had a SATA controller card with 8 ports, and they showed up with the numbers 1-8 in the "t" position of the device name. But I just built a new system with two LSI SAS HBAs in it, and my device names are along the lines of:

Hi, I have Dell md1200 connected to two heads ( Dell R710 ). The heads have Perc H800 card and drives are configured in Raid0 ( Virtual Disk) in the RAID controller. One of the drives had crashed and is replaced by a spare. Resilvering was triggered but fails to complete due to drives going offline. I have to reboot the head ( R710) and drives comes online. This happened repeatedly when

Hi all, Space is starting to get a bit tight here, so I''m looking at adding a couple of TB to my home server. I''m considering external USB or FireWire attached drive enclosures. Cost is a real issue, but I also want the data to be managed by ZFS--so enclosures without a JBOD option have been disgarded (i.e., I don''t want to use any internal HW RAID controllers). One

I saw Jeroen''s suggestion on how to use FXSplashWindow on the foxgui-users list and thought I''d try it. My attempt was as follows: require ''fox16'' include Fox app = FXApp.new("App") icon = nil File.open(''icon.gif'', ''rb'') { |f| icon = FXGIFIcon.new(app, f.read) } splash =

I have subclassed a FXDialogBox and put a FXText in it for displaying a hex dump in my application. I want to change the font to a courier type font since it''s a hex dump. When do the following it works as expected: # A little dialog box to use in our tests class FXTextDialog < FXDialogBox def initialize(owner) # Invoke base class initialize function first super(owner,

Apologies for asking something that is probably very obvious, i just started with S4 classes and i guess i am not finding documentation that lays out the grammar rules and gives enough examples. I understand that main method of writing a member function is to write a generic function and setMethod for this particular class. This, however, presumes that there is "virtuality" for this

I have 15x SAS drives in a Dell MD1000 enclosure, attached to an LSI 9200-16e. This has been working well. The system is boothing off of internal drives, on a Dell SAS 6ir. I just tried to add a second storage enclosure, with 15 more SAS drives, and I got a lockup during Loading Kernel. I got the same results, whether I daisy chained the enclosures, or plugged them both directly into the LSI

Tired of "little problems" trying to keep 7 drives working in an old desktop computer, I'm considering an external SATA drive enclosure with a controller card based on the Sil3124. http://www.ipcdirect.net/servlet/Detail?no=152 I'm a bit concerned about long-term support, namely that the company's driver page only lists drivers through RedHat 4.

How would you delete the Menu Pane using FXRuby? -----Original Message----- From: foxgui-users-bounces at lists.sourceforge.net [mailto:foxgui-users-bounces at lists.sourceforge.net] On Behalf Of Jeroen van der Zijp Sent: Thursday, June 12, 2008 10:22 AM To: Dr Gavin Tabor Cc: FOX Users Subject: Re: [Foxgui-users] Segmentation fault on exit On Thursday 12 June 2008, you wrote: > Hi there. I

Hello, The message you posted to the List below contained file enclosure data and consequently was not posted to the List. You will notice that the enclosure is quite large and contains data that many mailer programs can't use. This enclosure also adds far too much 'useless' data to the already huge archive file. If you wish to share files such as photos of your project with the

Apologies - I was not trying to correct you Brian, but to explore how the situation could arise. I'm sure you had a good idea why the namespace (or a reference to it) had been saved, but this was not clear to me and I thought, possibly not to others either. Thanks for putting me right over parent environments vs. enclosures - again I was not trying to correct you with the point I made there,

We have 14 500GB PATA drives left over from another project. Given that ZFS seems to prefer working with jbod''s, does anyone know of an inexpensive enclosure with an fcal interface to host the disks? This message posted from opensolaris.org

Warren Thanks for the thoughts. Even with 'dmesg', I found nothing. The reboot got rid of the problem and it continues to run perfectly in the same configuration. I, too, have a slight dislike for external USB disks, and much prefer internal drives for esveral reasons: - Internal drives are protected by being inside a tower and thus have less chance of falling or being bumped than

Hi all, I'm looking for documentation about the internals of the bridging software. We're putting together a new chip that incorporates, among other things, a core for a managed switch and a processor that will be running Linux. I wanted to have the Linux code (among other things) field SNMP requests and configure the managed switch. I'm hoping that it's as simple as

Hi asterisk-users at lists.digium.com, Add me as a friend on Last.fm so we can share our music taste :)? Check out what I'm listening to: http://www.last.fm/user/shina01/?invitedby=shina01&tp=ff_tp_b -------- I also sent you a personal note: "boo!" Signing up is free and takes less than a minute. Just click the link to automatically become my friend.

hi, 'dag' thanks for the help. i've been able to download all the headers. now i'm in a dilemma. i'm usig an i686 arch. i see that that centos 3.4 is for i386. can i still upgrade to 3.4 or do i've to wait till i get an upgrade for i686. regards. chaitanya. __________________________________ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone.