similar to: possible to remove a mirror pair from a zpool?

Hi all, I recently created a RAID-Z1 pool out of a set of 7 SCSI disks, using the following command: # zpool create magicant raidz c5t0d0 c5t1d0 c5t2d0 c5t3d0 c5t4d0 c5t5d0 c5t6d0 It worked fine, but I was slightly confused by the size yield (99 GB vs the 116 GB I had on my other RAID-Z1 pool of same-sized disks). I thought one of the disks might have been to blame, so I tried swapping it out

Ciao, the rot filesystem of my thumper is a ZFS with a single disk: bash-3.2# zpool status rpool pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c5t0d0s0 ONLINE 0 0 0 spares c0t7d0 AVAIL c1t6d0 AVAIL c1t7d0

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

Hi all, Sorry for the newbie question, but I''ve looked at the docs and haven''t been able to find an answer for this. I''m working with a system where the pool has already been configured and want to determine what the configuration is. I had thought that''d be with zpool status -v <poolname>, but it doesn''t seem to agree with the

Hey all, I''m not sure if this is a ZFS bug or a hardware issue I''m having - any pointers would be great! Following contents include: - high-level info about my system - my first thought to debugging this - stack trace - format output - zpool status output - dmesg output High-Level Info About My System --------------------------------------------- - fresh

I am curious why zpool status reports a pool to be in the DEGRADED state after a drive in a raidz2 vdev has been successfully replaced. In this particular case drive c0t6d0 was failing so I ran, zpool offline home/c0t6d0 zpool replace home c0t6d0 c8t1d0 and after the resilvering finished the pool reports a degraded state. Hopefully this is incorrect. At this point is the vdev in question now has

Hi experts zpool import shows some weird config of an old zpool bash-3.00# zpool import pool: data1 id: 7539031628606861598 state: FAULTED status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: data1 UNAVAIL insufficient replicas

Hi, Experts: A customer has X4500 and the boot drives mirrored (c5t0d0s0 and c5t4d0s0) by SVM, The ZFS uses the two other partitions on these two drives(c5t0d0s3 and c5t4d0s3). If we need to replace the disk drive c5t0d0, do we need to do anything on the ZFS (c5t0d0s3 and c5t4d0s3) first or just follow the regular boot drive replacement procedure? Below is the summary of their current ZFS

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to

HI, Dear R community, I am trying to created new variables and put into a data frame through a loop. My original data set: head(first) probe_name chr_id position array1 1 C-7SARK 1 849467 10 2 C-4WYLN 1 854278 10 3 C-3BFNY 1 854471 10 4 C-7ONNE 1 874460 10 5 C-6HYCN 1 874571 10 6 C-7SCGC 1 874609 10 I have

I have a customer who has implemented the following layout: As you can see, he has mostly raidz zvols but has one raidz2 in the same zpool. What are the implications here? Is this a bad thing to do? Please elaborate. Thanks, Scott Gaspard Scott.J.Gaspard at Sun.COM > NAME STATE READ WRITE CKSUM > > chipool1 ONLINE 0 0 0 > >

I''ve got a Thumper running snv_57 and a large ZFS pool. I recently noticed a drive throwing some read errors, so I did the right thing and zfs replaced it with a spare. Everything went well, but the resilvering process seems to be taking an eternity: # zpool status pool: bigpool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was

Currently I''m trying to figure out the best zfs layout for a thumper wrt. to read AND write performance. I did some simple mkfile 512G tests and found out, that per average ~ 500 MB/s seems to be the maximum on can reach (tried initial default setup, all 46 HDDs as R0, etc.). According to http://www.amd.com/us-en/assets/content_type/DownloadableAssets/ArchitectureWP_062806.pdf I would

I''m not sure if this is a problem with the iscsitarget or zfs. I''d greatly appreciate it if it gets moved to the proper list. Well I''m just about out of ideas on what might be wrong.. Quick history: I installed OS 2008.05 when it was SNV_86 to try out ZFS with VMWare. Found out that multilun''s were being treated as multipaths so waited till SNV_94 came out to

Running a zpool scrub on our production pool is showing a scrub rate of about 400K/s. (When this pool was first set up we saw rates in the MB/s range during a scrub). Both zpool iostat and an iostat -Xn show lots of idle disk times, no above average service times, no abnormally high busy percentages. Load on the box is .59. 8 x 3GHz, 32GB ram, 96 spindles arranged into raidz zdevs on OI 147.

I am in the middle of converting a FreeBSD 8.0-Release system to OpenSolaris b130 In order to import my stuff, the only way i knew to make it work (from testing in virtualbox) was to do this: label a bunch of drives with an EFI label by using the opensolaris live cd, then use those drives in FreeBSD to create a zpool. This worked fine. (though i did get a warning in freebsd about GPT

Hello. We''re currently using a Sun Blade1000 (2x750MHz, 1G ram, 2x160MB/s mpt scsi buses, skge GigE network) as a NFS backend with ZFS for distribution of free software like Debian (cdimage.debian.org, ftp.se.debian.org) and have run into some performance issues. We are running SX snv_48 and have run with a raidz2 with 7x300G for a while now, just added another 7x300G raidz2 today but