similar to: Xen breaks aacraid

I've got myself an Adaptec 2200 HW RAID card to play for couple of days. Tha card uses aacraid device driver. Seems to work nicely, however just wandering if there's a tool (prefferably CLI) for CentOS that can read out RAID configuration data, status of individual drives, maybe even manage (create/delete) RAID devices? Thanks for any and all pointers.

I'm trying to use the Dell/Redhat CLI to manage a pair of mirrored disks in a Dell PowerEdge 2650 but I get: FASTCMD> open afa0 Executing: open "afa0" Command Error: <The driver could not execute the requested IOCTL SENDFIB, 22=Invalid argument.> I have "options AAC_COMPAT_LINUX" in the kernel config and dmesg shows: aac0: <Dell PERC 3/Di> mem

Does Centos include any runtime monitor/control software for raid arrays on AACRAID devices as on IBM 3650's? -- Les Mikesell lesmikesell at gmail.com

I have just built a new SunFire X4100 server with an Adaptec 2230SLP RAID card using FreeBSD 6.2-PRE kernel (from September 20). Everything is working extremely well except I cannot run the aaccli utility on this controller. When I try to open the controller, it gives this error: Command Error: <The current AFAAPI.DLL is too old to work with the current controller software.> On

This isn't exactly a Centos question but maybe someone here can help: Does the AACRAID controller (as in an IBM 3550) store its config info on the drives or internally? I only have one of the boxes and want to load Centos 3.x on several drives which can be swapped into servers at another location. With SCSI, all that took was a full disk dd copy and a little fiddling with the HWADDR for the

Hi, Upon upgrading xen-kernel I see the following error/warnings at the end , though the upgrade process went fine. Installing : kernel-xen 1/1 /etc/sysconfig/kernel: line 7: alias: scsi_hostadapter0: not found /etc/sysconfig/kernel: line 7: alias: aacraid: not found Detailed logs : #################################################### --> Running transaction check

Hi there, I'm currently trying to install a server with Centos 4.3 x86_64. I have issues installing drivers from a Driver disk, I got a driver(2810SA) from the Adaptec site, I started it up with "linux dd" It reads the disk fine .... I can see the aacraid module in the list but as soon as I choose it. Then I get a screen saying "Do you wish to load more Driver Disks?" I

Hello, does anyone run xen on an dell poweredge 750 ? I am getting the following scsi errors on the raid driver on hight I/O load. aacraid: Host adapter reset request. SCSI hang ? aacraid: SCSI bus appears hung with kernel 2.6.8 the whole maschine hang on this error. now I am using xen 2.0.6 with kernel 2.6.11.10 and the latest aacraid driver from adaptect. so the device only hang ca 1:30

Hey guys, I am posting this again....because i didnt get any replay. Please I am doing my thesis and I am stack installing a guest machine from Yocto, a unix like machine. It boots successfully on the same host without xen. thank you again, Nas On Tue, Jun 4, 2013 at 5:37 PM, nesredin mahmud <nasmitlinux@gmail.com>wrote: > hello everyone, > > I am experiencing DomU booting

Hi Allen, Hi All, I''m looking into SR-IOV on Xen and in particular getting the VFs of the Intel 82756 initialised in dom0. One problem that I am coming up against is that the SRIOV extended PCIe capability does not show up for the PF (physical PCI function). Actually, the extended PCIe capability space doesn''t show up at all for any device. This seems to be related to a

I have just recently (physically) moved a system with 16 hard drives (for the array) and 1 OS drive; and in doing so, I needed to pull out the 16 drives so that it would be light enough for me to lift. When I plugged the drives back in, initially, it went into a panic-reboot loop. After doing some digging, I deleted the file /etc/zfs/zpool.cache. When I try to import the pool using the zpool

Hello Wei, On Sun, Jun 9, 2013 at 1:26 PM, Wei Liu <wei.liu2@citrix.com> wrote: > On Sun, Jun 09, 2013 at 11:58:26AM +0200, nesredin mahmud wrote: > > Hey guys, > > > > I am posting this again....because i didnt get any replay. Please I am > > doing my thesis and I am stack installing a guest machine from Yocto, a > > unix like machine. It boots

Hi, I've installed a FreeBSD (stable 9.2) as a guest on ESXi 5.5. I've added Adaptec Controller via passthrough. Unfortunately FreeBSD does not show hard drives. Any clue? aac0: <Adaptec RAID 5805> mem 0xfd200000-0xfd3fffff irq 18 at device 0.0 on pci3 aac0: Enabling 64-bit address support aac0: Enable Raw I/O aac0: Enable 64-bit array aac0: New comm. interface enabled aac0:

I am hoping I can get a little light she on a problem I am having trying to bring up a guest domain. I suspect that the problem is in my supplied file system First the environment. VT enabled dual core EM64T processor, Asus Mb (I can get the exact chipset infor if relevant) 2 Gig of DRAM SATA drives. I have build and booted the domain 0 using 3.0.2-2 version of xen. This seems ok.

Folks, Mercurial is selectable as an installation in OpenSUSE 10.3 YAST. I have done the following: hg clone http://xenbits.xensource.com/xen-unstable.hg hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg make dist sh ./install.sh I tried running the following to create the initrd but it failed: Depending on your config, you may need to use ''mkinitrd'' to

Hi, I had 6 crash in 3 hours with exactly the same messages is my aac controler dead ? aac0: COMMAND 0xc4c9d900 TIMEOUT AFTER 512 SECONDS aac0: WARNING! Controller is no longer running! code= 0x100 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 01 fault virtual address = 0x5a fault code = supervisor read, page not present instruction pointer =

Hi, I am running a Xeon with hyperthreading support. Until last week's HTT modifications, according to ps(1) and top(1) both logicals CPUs were in use. (Processes in CPU0 and CPU1 state; "C" column showing "0" or "1".) This has changed with a recent -STABLE kernel which includes last week's changes to HTT (removing "options HTT"). I am only seeing

Hi all I?ve got a few Intel Z87 chipset machines with Adaptec 5405 raid cards (latest firmware), they work fine on 3.18 but during Dom0 boot using kernel 4.9.13 it hangs at ?Using clocksource tsc? and the aacraid driver keeps trying to reset Has anyone seen anything like this? I?ve tried specifying clocksource=xen in grub instead of the default of tsc, and that has the same issue. HPET is

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

This isn't really a Centos question but it affects the systems so I'll ask here anyway. I've noticed when swapping disks around on IBM 3550 boxes that some of them see one more cylinder on drives than others but I can't find any settings or differences that might control this. It's an obvious problem when you fdisk/format on the one that sees the additional cylinder,