similar to: Failed to setup NAT network

I''m using Xen 4.1 and here''s what I did: 1.comment network-script and vif-script about bridge in /etc/xen/xend-config.sxp, uncomment the lines about nat 2.set vm config, add something like vif = [ ''mac=00:16:3e:00:00:11, ip=10.0.0.1'' ] 3.set /etc/network/interfaces in domU, add lines as follows: auto eth0 iface eth0 inet static address 10.0.0.1 gateway

Hi, I've been testing the Debian packages ahead of the Debian 7 release (which is very imminent) I believe this is a serious bug[1] in the package, as it appears that HVM networking is broken, or at the very least, requires some undocumented configuration step Specifically: - I can start the HVM domU without any vif - if I attach a vif, the domU will not start Looking at

My impression of this bug is that HVM networking is not possible with XCP, or at least it is not possible without some undocumented configuration setting or missing dependency package If there is a workaround from upstream, I would propose lowering the severity to important again. I am happy to test any proposed work around and provide quick feedback. The log output in my previous post suggests

I''ve looked everywhere for the error message I''ve posted in the title, doesn''t seem like anyone else has it (lots of missing hotplugs scripts). We''re using network-nat. ifconfig -a outputs this: eth0 Link encap:Ethernet HWaddr 00:19:99:a8:f4:5c inet addr:X.X.X.X Bcast:X.X.X.X Mask:255.255.255.255 inet6 addr: X::X:X:X:X/64 Scope:Link

errors from /var/log/xcp-xapi.log: 652Z|debug||1227 UNIX /var/lib/xcp/xapi|VM.start R:0b98978366e4|xapi] creating device emulator 652Z|debug||1227 UNIX /var/lib/xcp/xapi|VM.start R:0b98978366e4|xenops] Device.Dm.start domid=10 661Z|debug||1227 UNIX /var/lib/xcp/xapi|VM.start R:0b98978366e4|xenops] qemu-dm: should be running in the background (stdout redirected to syslog) 661Z|debug||1227 UNIX

Hello, I''m trying to setup an 8 port wan configuration (pptp+pppoe) with one vlan trunk. My internal networks are : LAN(eth9): 10.0.0.0/16 VLAN10(eth9) 10.10.0.0/24 VLAN20(eth9) 10.20.0.0/24 VLAN30(eth9) 10.30.0.0/24 VLAN100(eth9) 10.100.0.0/24 I would like to post my configuration here since i don''t success to do the following: 1. Communicate between VLANxx to LAN

I''m attempting to put together a Xen box, which has multiple VLANs running into it, on one bridged interface. I mostly copied the way it was done here: http://renial.net/weblog/2007/02/27/xen-vlan/ I basically have: bond0 is the bond device (composed of eth0 and eth1), vlan757 is the vlan device for vlan 757 on bond0, and "xen757" is a bridge created by the above scripts,

I installed 64-bit xen 3.1.0 (from xensource.com tarballs) on three new machines today, using a configuration setup that I''ve used successfully many times before. However, I encountered a new problem. These are Dell Poweredge 1950 servers, by the way. >From lspci 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) 08:00.0 Ethernet

Hi, I followed this guide<http://wiki.kartbuilding.net/index.php/Xen_Networking#Routed_Networking_with_NAT_2>, and started my xend service with nat-network support: (network-script network-nat) (vif-script vif-nat) Then I started my domU with the following vif configure: vif = [''ip=10.0.0.1'' ] my domU is a win7 system, and I configured the network as: ip:

Hello, There is a xen setup in which "brctl show" gives the following output. bridge name bridge id STP enabled interfaces eth1 8000.003048c9d4df no peth1 vif1.0 vif2.0

Hi list. I started with Xen yesterday, but I am facing a bit of a problem. My system had always configure eth0 with 10.0.0.4/8 I am using Xen unstable source (on Debian sid) Now I installed Xen, rebooted the machine, and first the usual network is coming up and then the xend will be started. I''ll end up with this, but I am wondering if this should be the way of things to be

Hi! I have a problem with my new Xen setup. I have installed Debian etch with netinstall and I''m using 2.6.18-6-xen-amd64 kernel in my dom0 and 3.0.3-0-4 version xen hypervisor. I''m using four network cards on my system and using three of them as xen bridges and dom0 is using the fourth one only for it''s own. So basicly both of my virtual servers use a network card

Hi! Please help me. # xm create win7.hvm Using config file "./win7.hvm". Error: Device 768 (vbd) could not be connected. Path closed or removed during hotplug add: backend/vbd/9/768 state: 1 grep -v ^# /etc/xen/win7.hvm | grep -vx '''' kernel = "/usr/lib/xen/boot/hvmloader" builder=''hvm'' memory = 2048 name = "win7" vif = [

Hello everybody, I''m new to Xen so forgive me if this is already well known issue. I''m using Ubuntu server 7.04 (feisty) with Xen 3.0.3 Everything works perfectly, apart from networking in NAT mode. With bridging it works, with NAT it works, well, quite strange. Namely, pings go through and name resolution works. But when I try to use anything substantial, then

Hi, I''m trying to set up networking on a new machine. I''m not getting any networking from the domU''s I notice that I have two bridges being created: xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:3024 errors:0 dropped:0

Hello, my current network setup looks like the following: dom2-eth0 (172.30.1.22) netmask /24 | | xen-br1 (no ip) | dom1-eth0 (172.30.1.21) netmask /24 dom1-eth1 (172.30.0.21) netmask /24 | | xen-br10 (172.30.0.1) netmask /24 | dom0 | | xen-br0 (normal IP) | eth0 (same IP as xen-br0) |

Well where do I start...I have a domU (ubuntu) booting and appears well but I don''t have an eth0 listed at all, dom) looks good. DomU: eth0 Link encap:Ethernet HWaddr 00:06:5B:15:C5:0B inet addr:10.99.99.5 Bcast:10.99.99.7 Mask:255.255.255.248 inet6 addr: fe80::206:5bff:fe15:c50b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Hi all, I have a very strange situation, which I can''t explain. On a Core 2Quad server with 8GB RAM, we have 10 xen domU''s, as follows: vps.animalsaregreat.info login: root@zaxen01:[~]$ xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 512 4 r----- 232.2 actionco.vm

Greetings! I finally got the install done for a couple of gust OSs (Win 2003 server & Suse Enterprise 10) Bothe gusts are up and running, but - no networking. My setup: Hardware - AMD Athlon 4200+, ABIT Motherboard, 4 GB of DDR2 RAM, 2 onboard GB NICs Host OS- Suse Linux Enterprise server 10 Xen - 3.0.2_09749-0.4 Config file for Win 2003 server guest: # -*- mode: python; -*-

I am running Fedora 16 64bit and installed libvirt. I have the VM running with arm emulation with this one issue I can't figure out. I used Virtual Machine Manager to manage the VM and can access its console there. The Ethernet appears to be eth1 and the guest can set an IP on it etc. However, I cannot see any traffic from the Host when dumping any of the interfaces. I've tried