similar to: [SPAM] XCP host with 2 VMs

Hello *, I have an All-In-One intranet server <samba3> and usualy a seperated <router> as default gateway, which connect me using HSPA to the internet Now I have installed an Huawai K3765 on my <samba3>, installed "pppd" + usb-modeswitch and removed the default gateway to <router>. OK I can continue surfing trough the <router> and <samba3> is

Hello, I am looking for ideas and suggestions. I want to use a 16 port GSM gateway as a trunk for outbound/inbound. I will also have two PSTN phone lines coming into the Asterisk server. All calls will go to an IVR on the Asterisk PBX. Outbound from extensions will route to GSM-GW when the dialed number matches a pattern set in the GSM-GW trunk. And accordingly for the PSTN trunks. But that's

* Is there a way to configure NUT so that it recognizes the huge additional battery pack that has been attached to the 2200XL? The 51minutes runtime is a number consistent with the load we have placed on a stock standalone 2200XL. With the extra large battery pack we've added, the runtime should be more than 2.5 hours. * I see the "Bizzare configuration" graphic on the

Hello, since I had delayed the programming of the UPS Device part, now it is time to continue... My Device is "24 V DC modular ATX PSU" which replace the standard ATX Power Supply in PCs and use 15-43 V Input Voltage. The microcontroller is a TI LM3S5T36 Cortex M3 and I get the "UPS" infos using up to 4 Maxim DS1780 and some I?C current sensors. The ATX PSU has 4

Hello *, I have my "24V DC modular ATX PSU" running yet and it collect already the data form the DS1780 and MAX1036/8. The Microcontroller is a Maxim Integrated Device DS89C450 and the USB-Controller a MAX3420E which works over SPI Bit-Banging. OK, this is now working and enumeration is done... ;-) Now since the PSU is a "Function" I was looking into the Linux

I've recently been working a bit on adding PDU (http://en.wikipedia.org/wiki/Power_distribution_unit) support in NUT. Some of you might have seen the Powerman thread, which also deals with adding more PDUs support: http://powerman.sourceforge.net/supported.html The result is that we now have support for 2 Eaton | Powerware ePDUs (Managed and Monitored iirc, check http://www.epdu.com). I plan

Hi Guys, asterisk drive me crazy! Now I have tried to use FreePBX but it require MySQL which I can not install du to a conflict with PostgreSQL. Does someone know, how to configure FreePBX to use PostgreSQL? Or does someone know another Asterisk Web-Frontend, without Database? It is realy not funny, to force users to install this monster on an ARM Microcontroller. I need only enterprise

Title: HOWTO-FreeBSD-on-XCP Author: John D. "Trix" Farrar Date: 2012-02-09 * The Challenge - ParaVirtualized FreeBSD 9.0-RELEASE under XCP 1.1.0 The idea here is to create a PV FreeBSD VM under Xen Cloud Platform (XCP) without starting with an HVM first. The documentation I''''ve been able to find on-line is at least a year old and is mostly written for Xen (under

This option is needed by vdsm for writing the ovf to a specific directory. The default is current directory. Bug-Url: https://bugzilla.redhat.com/show_bug.cgi?id=1176598 Signed-off-by: Shahar Havivi <shaharh@redhat.com> --- v2v/cmdline.ml | 5 +++++ v2v/output_vdsm.ml | 16 +++++++--------- v2v/output_vdsm.mli | 1 + v2v/test-v2v-o-vdsm-options.sh |

This option is needed by vdsm for writing the ovf to a specific directory. The default is current directory. Bug-Url: https://bugzilla.redhat.com/show_bug.cgi?id=1176598 Signed-off-by: Shahar Havivi <shaharh@redhat.com> --- v2v/cmdline.ml | 5 +++++ v2v/output_vdsm.ml | 16 +++++++--------- v2v/output_vdsm.mli | 1 + v2v/test-v2v-o-vdsm-options.sh |

This option is needed by vdsm for writing the ovf to a specific directory. The default is current directory. Bug-Url: https://bugzilla.redhat.com/show_bug.cgi?id=1176598 Signed-off-by: Shahar Havivi <shaharh@redhat.com> --- v2v/cmdline.ml | 5 +++++ v2v/output_vdsm.ml | 16 +++++++--------- v2v/output_vdsm.mli | 1 + v2v/test-v2v-o-vdsm-options.sh |

Hello Developers and *, I am working on a "24V DC ATX PSU" for Photopholtaik Systems which can have input voltages from 18V to 27.7 Volt and is entirely modular, which mean, you can select the desired module/s (up to 6) from ATX (96/144/240/300W), P4 (144W), SATA (82/305W) and Device (34/68/136W) And last not least, I want to build a "PowerWhatch" module which should be

Hello Charles, Am 2008-03-13 19:27:27, schrieb Charles Lepple: > Another advantage of going the HID PDC route (regardless of whether > NUT is involved) is that the device is essentially self-describing. If > the first version does not have a shutdown flag, but later versions > do, then very little driver code needs to change - just device > firmware. > > Also, I believe that

On Thu, 5 Apr 2018 14:53:51 +0200 Pino Toscano <ptoscano@redhat.com> wrote: > @@ -383,8 +581,9 @@ let rec create_ovf source targets guestcaps inspect > ] in > (match ovf_flavour with > | OVirt -> > - e "OperatingSystemSection" ["ovf:id", vm_uuid; > - "ovf:required",

Add oVirt specific elemnt to OVF. It represents the combination of machine type (i440fx/q35) and firmware (BIOS/UEFI). Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> --- v2v/create_ovf.ml | 20 +++++++++++++++++++- v2v/create_ovf.mli | 2 +- v2v/output_rhv.ml | 6 ++---- v2v/output_rhv_upload.ml

Hello Xen-Users, I am running a Debian GNU/Linux Devel-Station (P2/366 MHz, 512MByte) and use currently chroots which give some problems from time to time. I have following configuration: ----8<------------------------------------------------------------------ /dev/sda1 / 7700 GByte # Master System /dev/sda2 swap 256 MByte # Master System /dev/sda3 /var 512 MByte # Master System

Hello, Since I have now nearly all stuff running on my LH7A404 and now I am working on my DS80C411, I like to know, whether NUT show the APC UPS stats like the APC tools. Currently I do not know, HOW NUT triber the USB-Poert to get out the infos of the UPS. In theory I do send out only arround 5-60 lines of data which then NUT or any other programs must parse or something

When writing the OVF in OVirt flavour, add a ovirt:id attribute to the OperatingSystemSection tag: this attribute represents the numeric value of the ostype ID, which is ignored by oVirt when parsing OVFs in API mode. --- v2v/create_ovf.ml | 202 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 201 insertions(+), 1 deletion(-) diff --git a/v2v/create_ovf.ml

When erroring out about duplicated parameters, say "more than once" instead of "twice", since there can be more than two repeated parameters. Thanks to: Xiaodai Wang --- generator/fish.ml | 2 +- generator/perl.ml | 2 +- resize/resize.ml | 4 ++-- tools/virt-tar | 4 ++-- v2v/input_libvirt_vddk.ml | 2 +- v2v/output_rhv_upload.ml | 4 ++--

For historical reasons the OVF used in RHV export domain contains some deviations from the OVF standard. The format used in -o rhv has to remain fixed but for -o vdsm and we could produce much nicer OVF. This patch serves as a preparatory step to this. The main reason for creating different OVF is that it can be used to create VM by oVirt REST API. The RHV export domain flavor cannot be used that