similar to: prob boot xen-4 2.6.32 megaraid

Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal

i'm configuring a storage server with CentOS 6.2, it uses a LSI MegaRAID SAS controller, I'm using LSI's megacli to configure the storage... Any ideas on how to get drive failure notifications out of this system? I'm configuring hot spares but I'd still like some sort of notification when a drive has failed so the spare can be replaced. -- john r pierce

Everyone, I am trying to install a Centos 6.0 system on a SuperMicro with an LSI MegaRaid SCSI 320-2 controller. I had originally tried to install 6.4, but the 6.4 install DVD does not boot with this configuration. See : http://bugs.centos.org/view.php?id=5377 Fortunately, the 6.0 install DVD worked fine until it failed to identify the hard disc controller. I checked the lsi.com site which

I generally 3Ware controllers get recommended but the servers we are looking at getting use LSI Megaraid SATA 150-4 controllers. I was wonder what experiences there are under CentOS 4 with these positive & negative? Regards, Paul Berger

On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but I am not able to see the disk which is connected to MegaRAID SAS controller when I do fdisk -l (vtd support is enabled in Xen). Looks like the pci device(MegaRAID SAS controller) is getting dedicated successfully as I can see the device in the list of pci devices shown by

Hello, I''m trying to install Xen3 on a server, but I can''t make the MegaRAID driver work. I''ve installed Debian Sarge, the stock kernel (2.6.8.2) works perfectly with the hardware. The SCSI RAID driver is megaraid. Hardware is : - IBM eServer xSeries 330 server - Dell PowerEdge RAID II controller I''ve recompiled the xen dom0 kernel (2.6.12.6) to include

After 4 days of agrevation I felt it was best I post to the list before I break something or hurt myself. It seems that 2.6 from other posts seemed to kill support for this card in particular since LSI has EOL'd it. Although I've managed to download megaraid-2.00.3 which does support this card and build an object on a sperate box. Although the installer seems to require a driver disk and

I have tried many permutations of search terms in google and I haven't been able to find any confirmation that the megaraid* modules in centos4 supports port multipliers/multiplexers. Here is a link to the controller I have in mind at newegg: http://www.newegg.com/product/product.asp?item=N82E16816118032 In case anyone is interested, here is what my research has turned up when looking for

Life is much better now that I'm using -h instead of the manual. I have a new question about policies Direct and DisDskCache makes sense Cached and EnDiskCache makes sense not so sure about Direct and EnDskCache Cached and DisDsk Cache Do they make sense? -- Drew Einhorn

Does anyone have the 'MegaRAID Storage Manager' GUI working on CentOS 5.5? I can run it, but it won't let me log in. The docs state that it requires the local root username and password - but it always rejects this with "Message = Login failed: Invalid username or password!" Thanks James Pearson

Hi all, Does anyone know of a Linux rescue CD with driver for a SLI MegaRAID 8708? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

Hi All: Has anyone tried using an LSI MegaRAID 320-2E PCIe RAID Controller in an HP DL380G5 (of any HP G5 DL for that matter) running CentOS 5? It looks like it should work but it would be nice to know that someone has already done it before I start going to all the effort and expense of building the box. I have a spare DL380 and a couple of IBM EXP400 disk arrays that I would like to configure

On 05/01/2015 15:14, Philippe BOURDEU d'AGUERRE wrote: > Happy new year ! > > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. > I have a similar system, and don't have your problem: #

On 1/5/2015 7:14 AM, Philippe BOURDEU d'AGUERRE wrote: > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. works here fine on the 9261, which is an OEM version of the same card with the connectors in a different orientation... you might check your LSI firmware revision.

Le 05/01/2015 16:14, Philippe BOURDEU d'AGUERRE a ?crit : > > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot > fine. > > The server can't boot due to a bug in LSI megaraid module. Boot log ends

Le 14/01/2015 14:43, Nux! a ?crit : > You should open perhaps a bugzilla issue with redhat about this. Is it possible to post in Redhat bugzilla without a Redhat support contract ? Even when using Centos ? -- Philippe BOURDEU d'AGUERRE AIME - Campus de l'INSA http://www.aime-toulouse.fr/ 135 av. de Rangueil T?l +33 561 559 885 31077 TOULOUSE Cedex 4 - FRANCE

Well I'm pleased that my raid card post brought all the enthusiasts out of the woodwork. So who has installed LSI's MSM software under CentOS 7? I've downloaded the linux-x64 package from: http://www.lsi.com/products/raid-controllers/pages/megaraid-sas-9361-8i.aspx Extracted the files and run "install.csh -a". This installs vivaldiframeworkd under /etc/rc.d/init.d and

On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: > I've been googling, and haven't yet found the answer: does anyone here > know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger > than 2TB? > One way to find out is to plug 4TB drive and take a look. Another is to ask one who has the same controller to do the same for you. I am going to play with

Valeri Galtsev wrote: > > On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: >> I've been googling, and haven't yet found the answer: does anyone here >> know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger >> than 2TB? > > One way to find out is to plug 4TB drive and take a look. Another is to > ask one who has the same controller

On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: > I want to install Centos 7 latest build on NEC Server 5800/120b-2. > > The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. which megaraid card? they've made quite a lot. lspci will list the card type... linux will only see storage on a megaraid thats configured as a logical unit (eg, put in a