similar to: installing Windows 2008 R2

Hi all, After loading the GplPV drivers for Windows Server 2008, I wanted to get rid of the annoying F8 option when rebooting each time. I looked at Ready Driver Plus, which seemed to work, but was only a workaround. It also seemed to kill my terminal connection from Dom0. After some research, I found another way: http://www.ngohq.com/home.php?page=dseo Which will disable driver

Hello, I am running xen-3.3.1 with rhel5.3 dom0. I have a rhel5.3 domU that is stuck in the boot process. It seems it is trying to bring up the network. We see this problem only occassionally. This is the last console output: Running configure_os... Warning: Configuring networking... Warning: HOSTNAME is not defined Updating ifcfg-eth0 [ OK ] Allowing IPv4 link local addresses [ OK ]

Hi, Since a week or two I can''t create two of my three WinXP DomU''s anymore, the third one starts just fine. This is the basic error message I get: # xm create WinXPViaLilaGeert Using config file "./WinXPViaLilaGeert". Error: Creating domain failed: name=WinXPViaLilaGeert There is little information in this error message. /var/log/xen/xend.log has a little more:

Hi all, after installing the driver ( I used the Vista-2008-Debug version) and rebooting, the system presents me an interface for recovering the OS using an image. I use Xen 3.3.1 Is there a workaround? Thanks and regards, Francesco Gallo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi all, is there someone who has successfully installed GPLPV driver 0.10.0.130 on Windows 2008 Server R2? Thanks and regards, -- Francesco _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

We have a 10Gbps connection to our server so I need to be able to create VMs using the faster e1000 nics instead of the default Realtek 100Mbps ones but I''m not sure how to go about it. Is there a walkthrough or "howto" or can someone point me at some simple instructions? I''m using xen-3.0.3-105.el5_5.5 and Centos 5.5 kernel 2.6.18-194.32.1.el5.centos.plusxen VMs are

Hi all, I installed Xen 3.4.0 on RH5.3 from the source, It is working fine (Dom0), but when i tried to create new guest (hvm) by the virt-install i got the next message: Wed, 23 Sep 2009 12:02:15 ERROR virConnectOpen() failed Traceback (most recent call last): File "/usr/sbin/virt-install", line 560, in ? main() File "/usr/sbin/virt-install", line 348, in main

I''m having issues with HVM live migration and every xen version I''ve tried - 3.0.1, 3.1.x, 3.3.0 and 3.3.1. Migrations will fail intermittently with messages like this on the receiving hypervisor: [2009-02-02 11:35:19 12629] DEBUG (XendCheckpoint:264) [xc_restore]: /usr/lib64/xen/bin/xc_restore 4 4 2 3 1 1 1 [2009-02-02 11:35:19 12629] INFO (XendCheckpoint:403)

Hello, we are using 3.4.3 from Gitco.de on 64bit Centos 5.8 and we have PV guests 64bit. According to described security bug we are in danger. What do you suggest? Wait for gitco update or build xen own with patch? Br Peter

Guys! I have one fiber channel IBM storage (10T) and 8 HP Proliant servers with 32G of RAM on each and 1 HP with 4G of RAM. My question is: * How to use the same storage (block device) with all my different virtualization servers simultaneously? I have 2 open source Xen with CentOS 5.4, 2 VMWare ESX, 2 Citrix XenServer, 2 KVM powered by Ubuntu and 1 Debian exporting the IBM storage to a SAN

Hey, I''ve been trying to get the gplpv drivers working with Windows 2008 R2 64-bit on both a stock CentOS 5.8 install and CentOS 5.8 w/ Xen 4.1.2 from the gitco repos. I''m getting a BSOD shortly after boot up and it can be seen at http://techmonkeys.org/xen/ -- along with the qemu log. Has anyone had success with these drivers and Windows 2008 R2 64-bit? If so, what am I

Just reporting some iperf results. In each case, Dom0 is iperf server, DomU is iperf client: (1) Dom0: Intel Core2 3.16 GHz, CentOS 5.2, xen 3.0.3. DomU: Windows XP SP3, GPLPV 0.9.12-pre13, file based. Iperf: 1.17 Gbits/sec (2) Dom0: Intel Core2 2.33 GHz, CentOS 5.2, xen 3.0.3. DomU: Windows XP SP3, GPLPV 0.9.12-pre13, file based. Iperf: 725 Mbits/sec (3) Dom0: Intel Core2 2.33 GHz,

Distro: debian unstable Xen version: 4.0.0-2 This is the config: #HVM #still no qemu-dm in debian #kernel = "/usr/lib/xen-4.0/boot/hvmloader" #builder = ''hvm'' #memory = 2048 #name = "webserver" #vif = [''bridge=eth0''] #disk = [''tap:tapdisk:aio:/srv/xen/webserver.img,xvda,w'',''phy:/dev/cdrom,xvdb:cdrom,r'']

Hi I''m wondering what does viridian=1 option actually does? I installed Xen 3.4.1 from Gitco''s and installed Windows 2008 R2 (standard) server, 64-bit, which supposed is hyper-v aware? But looking device manager i dont see anything special, still all using emulation drivers. Should i install Hyper-V IC? Terveisin/Regards, Pekka Panula, Net Servant Oy

Hi, I am having problems creating VMs in virt-manager. I have played with different xen hypervisor versions 3.0 & 3.4 (with rpm -i --force) but have in principle gone back to the originals. - Though I cannot absolutely exclude that something has gone wrong. In principle I am using rhel 5.4 with the gitco xen 3.4 hypervisor. Can anybody put me on the right track with the attached error

Hi, I''m trying to create OpenSolaris (2008.11) domU on RedHat Linux dom0. I''m using a file backed VBD. I used the iso image to first launch and install OpenSolaris into the file VBD. Once that process is complete, I''m trying to run it using the config file below: name = ''opensolaris'' vcpus = 1 memory = "512" vif =

I''ve just uploaded a couple of .bat files to http://www.meadowcourt.org/downloads/gplpv_uninstall_bat.zip that will manually (and forcibly) uninstall GPLPV from your computer, which seems to be necessary before doing upgrades from some versions. Run the uninstaller, reboot, then install. There is a 0.9.x and a 0.10.x uninstaller, which differ slightly, but the basic steps performed are:

I''ve just uploaded a couple of .bat files to http://www.meadowcourt.org/downloads/gplpv_uninstall_bat.zip that will manually (and forcibly) uninstall GPLPV from your computer, which seems to be necessary before doing upgrades from some versions. Run the uninstaller, reboot, then install. There is a 0.9.x and a 0.10.x uninstaller, which differ slightly, but the basic steps performed are:

Hi. Just wondering is someone have been able to connect usb memory sticks in xen 4.1-gitco running hvm windows 7? I use xen 4.1 from gitco, is working without any issue, I need support for a usb memory stick, but I had not been able to make this works. Reading xm commands and process, first my MB Biostar A780L3L v6 wont support IOMMU. Now exist a doc from xen wiki from someone from Fujitso

I have installed the 210 gplpv (debug), when I try to update them with current gplpv I get a BSOD even so when I try to uninstall them. Now I have made a bootentry that specifies NOGPLPV, what gives me a bootable system after such a crash, I found (uninstalling the leftover driver packages after getting bsod during uninstall of the main package) that uninstalling the net driver leads to bsod. Now