similar to: tap(net) device is no longer exists

Hi! I''m not new to Xen but I''m new to this list. I''m having a truely bizarre problem with Xen bridged networking at the moment. This is a new install, on RHEL4. The symptom is that any domU set up simply fails to talk to anything else. It''s there, and running, and it has an ethernet device, but there''s never any response. After digging through the

Hi Shimizu --- Shimizu Miki <> schrieb: > Hello, > > Doesn''t the vircual nic work at all? After the hint of Timo (http://lists.xensource.com/archives/html/xen-users/2006-05/msg00091.html) I got the virtual xen network card show up in yast. However, when I configured it, yast came up with an error message that''no driver module for the device found''

Hey All I''m Using Xen 3.0.3-105 on CentOS 5.5. It Has to Nics: eth0 - Internet eth1 - Internal Lan ( where Dhcp , DNs , Cobbler - Kick Start Server Resides ) I''ve Set xend-config.xsp to create xenbr1 on eth1 and it looks well So Guest May Get Access TO ALl Resources via the Bridge. brctl show bridge name bridge id STP enabled interfaces xenbr1

My very first xen DomU can not ping anything on my network. Well that is not entirely true, it can ping itself. I did not touch any of the scripts in /etc/xen so xen should be using bridging. My pc is running xen-unstable and uses a 3Com PCI 3c905B Just after the ''xen start'' on Dom0 brctl shows: bash-3.00# brctl show xenbr0 bridge name bridge id STP

Hi folks, I read quite some posts about "Destination host unreachable" problems before, but none could help me to solve my issue. So here we go: This is what I am using: SUSE Linux Enterprise Desktop 10 SP1 - Current with all updates Network configuration of my dom0: foobar:~ # ip a 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd

Hello, I am trying to run Xen 3 on FC5, but I cannot have the eth0 interface appear in domU. I have 3 servers running FC3 and Xen 2 with various domUs since a year. Everything is fine on that front. I took one of the server, upgraded it to FC5 and did the following: - yum install xen kernel-xen0 kernel-xenU - grub.conf contains title Fedora Core (2.6.15-1.2054_FC5xen0 root (hd0,0) kernel

I don''t know if there was a problem in the archive or not, I just wanted to link to this post of mine, but I could not find it in the archive. So here''s a re-post. -------- Original-Nachricht -------- Betreff: [Xen-users] Xen, NIC bonding, ARP problem Datum: Fri, 30 Mar 2007 10:05:45 +0200 Von: Dominik Klein <dk@in-telegence.net> An: xen-users@lists.xensource.com Hi

Hello Everyone, I have set up a xen server with 10 physical network devices using the bridge mode of XEN. This is because I want to split and separate the network traffic for security reasons. Maybe the best way is to use pci back hide. But I want to understand what is going on here. For all testings I have only activated eth[0-3]. My first tests were successful. I have created a VM using

Hi, I just installed Xen in Ubuntu Hardy. DomU is not accessible either from Dom0 or external network. I used default set up network-bridge/vif-bridge from xend-conf.sxp. Bridge has got default name eth1 which is my default ethernet interface. Before creating DomU: root@jaguar-0:/home/longina# xm list Name ID Mem VCPUs State Time(s) Domain-0

Hi all, my dom0 is centos5.2 and domU paravirtualized is centos5.1 I can play sound on dom0 but not in domU (name: gasphar), moreover I use wifi as my inet connection and on installing domU cento5.1, I used virt-manager. I know that libvirtd made virbr0 and when changing to xenbr0, I cannot connect to internet but ssh to dom0 is fine! so how do I enable sound device on domU and changing to

I''m having an issue forwarding through an Intel on-board graphics adapter. This is on a Dell Optiplex 780 with 8GB of RAM. The pass-through works perfectly fine if I have 2GB of RAM assigned to the HVM domU. If I try to assign 3GB or 4GB of RAM, I get the following on the console: [ 41.222073] br0: port 2(vif1.0) entering forwarding state [ 41.269854] (cdrom_add_media_watch()

I''m having an issue forwarding through an Intel on-board graphics adapter. This is on a Dell Optiplex 780 with 8GB of RAM. The pass-through works perfectly fine if I have 2GB of RAM assigned to the HVM domU. If I try to assign 3GB or 4GB of RAM, I get the following on the console: [ 41.222073] br0: port 2(vif1.0) entering forwarding state [ 41.269854] (cdrom_add_media_watch()

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

I''m using xen-3.0.3-64.el5_2.1 on centos 5.2. When I installed centos 5.2 at first time, I could see shared physical device (xenbr0). but after updating virtualization package by yum, it disappeared... connection.py is patched at centos 5.2 release time. so I can''t find out what''s wrong.... bridge configuration is below and it''s normal state.

Hi all, I am running Xen 3.0.2-2 (taken from XenSource) with Linux kernel 2.6.16 (taken from Debian Sid), I compiled Xen and 2 kernels (dom0 and domU). Here is the ascii-art of my setup: ------------ ------------- | LAN |------------------------| waste | 192.168.0.94/24 ------------ ------------- | ·····························

Hello, We have a machine (Debian Etch, Xen from Debian repositories, etc.) with two NICs: one for LAN (192.168.0.0/24) and another one with public IP address. After enable Bridging (in /etc/xen/xend-config.sxp): (network-script ''network-bridge netdev=eth0'') (vif-script vif-bridge) # eth0 is the LAN NIC I have eth0, peth0, vif0.1 (I guess that it''s usual for you) and

Here is the situation. I have a xen system with 2 drives setup in a RAID1. I pulled one drive and put it into an identical server. Now, when I boot up the new server, peth1 is not created. [root@dom0 ~]# ifconfig | grep Link eth1 Link encap:Ethernet HWaddr 00:14:38:A7:55:C2 inet6 addr: fe80::214:38ff:fea7:55c2/64 Scope:Link lo Link encap:Local Loopback vif1.0 Link

Hi, I have taken the long and winding road and indeed it lead me to your door. I need your help, please. My Xen includes 2 guests. Xen itself (10.2.0.52) gets free access to the outside world and to its guests. Both guests however (10.2.0.54/10.2.0.55) see each other but stay under house arrest! Not a single ping manages to go past the bridge (xenbr0) and get an answer from the default gateway

Hello, I''ve recently changed my xen network setup and now, almost expectedly, my configuration has broken access to the Domus from the network, and now I need a little help. Previously, I had four interfaces, only one of which was configured to be used by both dom0 and domu. I have since created a bond between eth2 and eth3, expecting that eth0 would be automatically assigned for use

CentOS 5.5 Xen "standard" Xen Installation. I have two nics. I just put the second one to DHCP and modified the ifcfg-et01 and so far I am holding, but I am not confident. Prior they were sequential IP Addrs on same subnet. arpwatch has indicated flip flips. I can find no rhyme or reason to predict them. I know I missed I must have missed a step somewhere. I want to keep the