similar to: Need advice for searching vt-d capable mainboard

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

Hi! I wanted to post this to Xen WIKI, but I have no write rights there. I have talked to AsRock support, and they said, that: - all Z87, H87, Q87 and B85 asrock mainboards support vt-d, - you have to check if vt-d is supported by the CPU, - there are no information on vt-d support in future haswell mainboard chipsets, like H81. I''m willing to test it, when I get hands on

Good day to you Im a casual Xen user and am also using I/O Virtualization. I had always trouble getting DMAR tables (and IOMMU) recognized with Asus Mainboards, despite the fact that I always used this boards a lot. Since the Nehalem Intel architecture, I looked into Intel Mainboards due the fact that this seems to work out with Xen, Linux and VT-d. My request is, that someone who tried Asus

Hi, can someone recommends mainboads+cpu combination with working vt and vt-d for a home server ( means reasonably priced) and with at least 3 pci slots besides the mainboards mentioned in http://wiki.xensource.com/xenwiki/VTdHowTo. Would it be worth to wait for AMD iommu technic, which should appear this year ? Thanks Frank _______________________________________________ Xen-users

https://bugs.freedesktop.org/show_bug.cgi?id=63101 Priority: medium Bug ID: 63101 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] NVIDIA GeForce 7300 GT AGP graphics card will not display any text characters on VIA Technologies Apollo MVP3-based mainboard QA Contact:

Hi there, I use P5B-VM mainboard with on baord GPU from manufacturer ASUS. Does anybody know if I have to set special settings in wine to play 3D games or older games like ANNO 1503? Especially Anno 1503 can be started but if the details are set to "high" it works very slow. Or could it be that this GPU "Integrated Intel? Graphics Media Accelerator X3000 (Intel? GMA X3000)"

hi all: When I install CentOS 3.3 x86_64 on a athlon64 with a Gigabyte K8NS mainboard(nForce3 250 chipset), it hangs after detecting IDE controller. I've tried to pass acpi=no to kernel, but the problem still exists. can anyone help me? thanks!

Dear All Can you please do me favor and let me know how can I check for my CentOS mainboard type ? Please be informed that I want to know if it is as EPIA 500 or EPIA 600 and I am seeking a way to check it as we check for our HDD type via /proc/ide/hda/model . Can you please let me know where such an info can be checked via /proc folder ? Let me thank you in advance -------------- next part

Hi, Can anyone recommend an Intel chipset mainboard for Intel Pentium Dual Core 2 CPU which will be able to run CentOS 5? Thanks

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

Hi! Facing a strange problem about not being able to access the floppy drive after booting from a rescue-floppy with 2.2.x kernel on an asus p4te mainboard, i searched the net and found a bug in the bootsector of the 2.2.x kernels. Before control is redirected to the kernel, the floppy drive is shut down in a way, that freezes the FD-Controller on recent mainboards (like the ASUS P4T-E). The

Hello list, I've been using PXE Boot for quite some time now and it has been working without any problems. I'm using a Biostar M7VIZ mainboard with a VIA KM400 chipset, and VIA-Rhine VT6102 NIC. Yesterday I upgrade the Kernel on my net-boot machine from 2.4.24 to 2.6.12. When I power on the machine it boots up normally. However, when I reboot the machine, the mainboards PXE-ROM only

Hello all, this mail is related to a post by Axel Schöner that I found at http://article.gmane.org/gmane.comp.emulators.xen.user/40621 when I was searching the WEB about solutions to my problem. I would like to confirm that VT-d with XEN 3.3 kernel 2.6.18.8 on mainboard Intel DQ45CB seems to be broken. Survey (details are down below) --------------------------------------- Whenever I boot my

Dear R-developers, the following may seem a weird question for R-devel – I try anyway, because it does seem to be related to usage of R and R's way of interacting with the hardware. When running R (2.4.0) on my new dual core Windows XP system (Intel Core 2 Duo E6600, Mainboard ASUS P5B, BeQuiet Power Unit), I observe various types of sounds (not related to fans) when running at full

This is my first time setting up Asterisk in production and we are buying the Digium TE121-card for use with an ISDN-30 connection. We are considering buying a Fujitsu-Siemens Primergy TX200 S4 - http://www.fujitsu-siemens.com/products/standard_servers/tower/primergy_tx200s4.html - for handling the calls. Quad-Core Xeon, 2.5 GHz / 2 x 6 MB / 1333 Mhz. 2 GB RAM, 3.5" SATA II discs. I know this

Hello, I am looking into building a workstation using Xen to host several operating systems. Looking at the pci passthrough requirements of Xen4.1 on the VTdHowTo<http://wiki.xensource.com/xenwiki/VTdHowTo>page, I am a little puzzled with the fact that only Intel Core2Duo (with VT-x), Core2Quad, i7 and Core i5 (vPro Brand) CPU''s are supported while motherboards with the i55x0

Hi, I''ve successfully used VT-d on an ASUS P6T mainboard which is known to have really buggy RMRR tables. I tested passtrough with: - the onboard (fake-)raid-controller (no problems) - a pci card (no problems) - VGA cards (worked only partly - I''ll investigate that) I wrote a little patch to the code parsing the RMRR tables and enabled the following command line options:

Hi again folks! ;) As before, I will transform one E1 30 Channel PRI into 30 FXS channels using Adit 600. Now I'm into choosing server platform. And the two opponents are: * Dell PowerEdge 750 w/ SCSI RAID (or even SATA RAID1) * FujistuSiemens PRIMERGY RX100 S2 (SATA RAID1) As I've seen people having problem with HP server, I havn't looked at it at all. What experience do you

>>(must >>have something to do with my mainboard :) >No, it had nothing to do with hardware or kernel, msi.dll is a Ah. I thought MSI mainboards... >release, when it starts working, you will probably read about it in the >wine weekly news.In the mean time, you can try a native msi.dll if you >have a windows license. Mmm. Sorry. Don't have it. Can you/somebody

Am 16.01.2014 08:17, schrieb Thomas Schmitt: > Another candidate image would be > http://cdimage.debian.org/debian-cd/current/i386/iso-cd/debian-7.3.0-i386-netinst.iso > which would have the advantage of not containing EFI/GPT stuff, that > might introduce more confusion. (I could not figure out whether your > mad board claims to be capable of EFI.) The board first appeared mid