Displaying 20 results from an estimated 3000 matches similar to: "PCI Passthrough on Xen 3.3"
2008 Jun 20
2
PV DomU kernel 2.4(.34) for IPCop
Hi everyone,
I am currently in the process of setting up a firewall/access point
DomU and I would like to know if there is any way to run a linux
kernel 2.4(.34) based system as a DomU. The primary reason for this
is that I want to run IPCop on such a kernel, but also that I
consider kernel 2.4 based systems to be more suitable for some
applications, especially for use as a firewall.
2008 Nov 16
2
PCI passthrough to domU does not work with XEN 3.3
Hi!
As dom0 I''m running Ubuntu Hardy withe xen 3.3 from backports.
Reason to using xen 3.3 is that I could get Intrepid stock kernel to
work as domu with xen 3.2.
Now the problem I have is that I can''t passthrough PCI-devices to my domu.
If I run lspci in the domu nothing is returned.
I''ve tried to use the kernel from Hardy (2.6.24-21-xen) and stock
kernel from
2008 Nov 02
4
Fw: Re: What packages ubuntu-xen-server & ubuntu-xen-desktop are up to on intrepid
I have installed Ubuntu Intrepid Server on bare metal and successfully ran:-
# apt-get install ubuntu-xen-server.
It installed several packages on system . Now i can see files
/boot/xen-3.3.gz, /etc/init.d/xend, /etc/init.d/xendomains, but no
xenified kernel gets in. Attempt to use vmlinuz-2.6.27-7-server, obviously , fails with system panic.
I do remember recompiling procedure for Xen
2008 Dec 15
5
pci passthrough under xen-3.3 without VT-d
Hi all!
I''m hoping someone here might be able to help. I''m familiar with several UNIX''es, though farily new to Linux...
I''m running RHEL 5.2. I''ve got the RHEL kernel headers installed, etc, and compiled xen-3.3.
Once that was built, I rebuilt libvirt, etc, the kernel, and all the modules. The whole mess boots and runs fine... mostly.
My hardware
2011 May 24
0
Debian and Ubuntu packages of 1.2.5
The Xapian 1.2.5 packages are now in Debian unstable, and I will upload
backports for Debian 6.0 (squeeze) once they've all migrated to testing,
which should happen in a few days time:
http://backports.debian.org/
I've uploaded backported packages of 1.2.5 for hardy, karmic, lucid,
maverick and natty, except for xapian-bindings which failed to build
on hardy:
2008 Nov 04
4
Problems with Wine on Debian
Hello all,
I am fairly new to Linux, so I hope that the following problem is not just me being ... new to Linux.
I have been trying to install Wine on Debian (Etch 4.09 I think it is called). I first tried to use the
apt-get install Wine
command followed by the winecfg (creating the .wine folder), but when I tried to run the notepad.exe (i.e. with the command wine
2016 Dec 24
0
AUTOREPLY Allow direct connection between some (but not all) node...
Sehr geehrte Damen und Herren,
Ab dem 23.12.2016 bis einschließlich 06.01.2017 sind wir im Weihnachtsurlaub.
Ab dem 09.01.2017 stehen wir Ihnen wieder wie gewohnt zur Verfügung.
Wir wünschen Ihnen und Ihrer Familie ein frohes und gesegnetes Weihnachtsfest
und einen Guten Rutsch ins neue Jahr.
Mit freundlichen Grüßen
Ihr Hardy Barth - Team
EDV- u. Elektrotechnik Hardy Barth GmbH
2005 Jan 25
1
Linux distros and PPTP passthrough
Any recommendations for a Linux distro to put Shorewall on top of?
My main concern is to be able to use a Windows NT PPTP VPN server behind
the firewall. If I remember right, there were some issues with passing
GRE traffic through some versions of the Linux kernel. Are they solved
now or do I still have to do some cryptic kernel patches?
Experiences with that?
Thanks!
Tim
2012 Aug 04
2
wheezy VT-d passthrough test: DMAR:[fault reason 06h] PTE Read access is not set
lspci -vvv and -t attached
Serial console output: http://pastebin.ca/2177395
Main error appears to be:
(XEN) [VT-D]iommu.c:858: iommu_fault_status: Primary Pending Fault
(XEN) [VT-D]iommu.c:833: DMAR:[DMA Read] Request device [00:1e.0]
fault addr df8e5000, iommu reg = ffff82c3fff57000
(XEN) DMAR:[fault reason 06h] PTE Read access is not set
onboard nic on the same bus is going
2008 Aug 29
1
[RFC] [PATCH] SCSI passthrough for virtio-blk
Hi all,
I got bored and implemented SCSI passthrough for the virtio-blk driver.
Principle is quite simple, just put the missing fields (cdb, sense and
status header) on the virtio queue and then call the SG_IO ioctl on the
host.
So when using '-drive file=/dev/sgXX,if=virtio,format=host_device' you
can happily call any sg_XX command on the resulting vdX device. Quite
neat, methinks. And
2008 May 08
1
qemu/kvm: support for pci passthrough
Hi,
I saw there was an active discussion about pci passthrough support in
KVM. I'm not a Dev, only a sys admin that need this support. As i saw
on the KVM home page that this feature is plan for 2H2008 in the
roadmap, I wondered if you already have a more precise time frame for
this release? Xen already have this feature but for the rest i prfer
KVM. As this is a key point for the final
2012 Aug 27
0
PCI passthrough amd/ati
Hi,
i have compiled xen from git 26.08.2012, with kernel 3.4.7 ( 3.5 has usb
problems ) and i have passthrough pci-e amd/ati 6670
after installing the drivers for it and reboot windows 7 it automatically
selects amd/ati for primary graphic card, in windows it works fine
i have stress test it a few hours no problem, but with some games the
display driver amdkmdap constantly restarts.
i get black
2007 Mar 25
0
PCI NIC passthrough problem with RH 2.6.19 kernel
Hi,
I have a perfectly running Xen 3.0.4 installation with kernel 2.6.16-42 with
PCI passthrough for my internet interface (ethernet).
But with I boot my 2.6.19 xen kernel on dom0, I''m unable to have the NIC
working in domU. I can see the NIC both in domU and dom0 with lspci. All
other network interfaces are working correctly (ethernet in dom0 and
bridges).
Here is my entry in grub
2008 Mar 14
1
Re: PCI passthrough working on Xen 3!
Hi Jeff.
I read that you use PCI Passthrough and works well, i
was wonder if you can tell me how you do that ''cause i
can''t find how to do it :( and i really need to.
So if you can give some advice about how you do it
would be really helpful.
I appreciate your help Jeff.
Regards
Ivan
____________________________________________________________________________________
2013 Dec 19
0
Broadcasting DTMF to confbridge users or DTMF passthrough
Hi,
Trying to properly broadcast / relay DTMF digits to other confbridge users, but does not appear to work. Goal is to have a conference user be able to receive the DTMF, so it has the effect of being 'broadcasted.'
I have the following set up in 'confbridge.conf':
dtmf_passthrough=yes
From logger.conf, I can see the DTMF tones via setting "console => dtmf". When
2009 Jan 18
0
Asterisk T.38 Passthrough + T38Modem/Hylafax - has anyone had luck with this?
Hi,
I'm trying to get T.38 passthrough to work to T38Modem and Hylafax so
I can terminate T.38 faxes from an ATA.
However I haven't had much luck. I've tried two supposedly T.38
capable ATAs, the Grandstream 206 and the 502.
The 286 seems to connect to T38Modem, but Hylafax doesn't get any fax data.
The 502 never even gets fax tones from Hylafax, so it seems like its
t.38 is broken
2008 May 29
0
Is PCI-Passthrough supported in Linux 2.4 domU kernel?
Hello,
I found that there is no pci frontend module in the Linux 2.4.21 domU
kernel, coming together with Xen 3.1.0. Does that mean Linux 2.4.21
domU kernel cannot use the PCI exported from dom0? Does anyone know
why this is not supported? Is it possible to back-port this feature
from 2.6 domU kernel back to 2.4?
Thanks,
Jimmy Jin
_______________________________________________
Xen-devel
2011 Jul 12
0
NIC PCI passthrough
Hi All,
I have configured a domU (netdom) to connect direct to a NIC using PCI
passthrough. The NIC is now hidden from dom0, and hence dom0 goes off the
network. Is there any way to configure dom0 to connect to the network via
netdom. How do I setup a backend driver in netdom and frontend driver in
dom0 and other domUs for connecting to the network?
I have only one NIC on my host, and I am using
2007 May 31
0
[RFC][PATCH 6/6] HVM PCI Passthrough (non-IOMMU)
libpci.patch:
- A library to access the PCI config space, probe the bus for
devices, etc.
It is basically a copy & paste from the libpci app.
- Uses the 0xcf8/0xcfc method to read the config.
- PIO/MMIO low-level access functions.
Signed-off-by: Alex Novik <alex@neocleus.com>
_______________________________________________
Xen-devel mailing list
2012 Dec 09
0
PCI passthrough: USB device not recognized
Hello,
I''m experimenting with Xen. I managed to get running Windows8 Enterprise
Evaluation in domU and passed through an ExpressCard34 USB3.0 controller to
which I connect things. I have an external USB sound card working in domU
just fine but when I''m trying to connect another USB sound capable device I
get that error. If I open properties of the faulty device in Windows Device