similar to: DomU partition resize problem

Hello, I thinking about using PCI passthrough to dedicated a domU as firewall. I understand PCI passthrough concept. When done, my domU will see network card and the dom0 won''t any more. So I''ll be able to filter all trafic from outside, since it will go through network domU. Then, how will I be able to connect other domU (and maybe dom0) to the network domU ? In a normal way,

Hello, Just baught this ups to replace an Ellipse. I've had a look at the nut hardware compatibility list, it's fully compatible and uses the same driver as ellipse (usbhid-ups) Here is the error I get when I "/usr/bin/upsdrvctl start" : Network UPS Tools - UPS driver controller 2.6.5-Unversioned directory Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned

Hello, I''m facing a strange issue with network card PCI passthrough on my openwrt test domU. - With network PCI passthrough, DNS lookup failed for some domains (exemple, google.com) but not for other (free.fr my ISP, or my domain jbfavre.org). I can ping an IP address without any problem. - Starting domU as a "normal" (ie without PCI passthrough), no problem. As far as I can

I often get the message: EXT2-fs warning (device hda6): ext2_fill_super: mounting ext3 filesystem as ext2 I have googled for a reason and a way to solve this - but not found something I could use. Maybe somebody here konws what to do? best regards keld

I get the following warning when running xend start, and a similar warning sometimes when doing xm commands: /usr/lib/python/xen/xend/XendNode.py:26: RuntimeWarning: Python C API version mismatch for module xen.lowlevel.xc: This Python has API version 1012, module xen.lowlevel.xc has version 1011. import xen.lowlevel.xc /usr/lib/python/xen/xend/xenstore/xstransact.py:10: RuntimeWarning:

Hi all, could somebody point me to what is considered a sound way to offer Xen guests on a two node DRBD cluster in combination with Pacemaker? I prefer block devices over images for the DomU''s. I understand that for live migration DRBD 8.3 is needed, but I''m not sure as to what kind of resource agents/technologies are advised (LVM,cLVM, ...) and what kind of DRBD config

Suse 10.1 AMD64 Xen3 New to Xen. The dom0 is up and running. I am trying to get my first domU working. My approach is to use precompiled images from jailtime.org. After some manual tinkering with the .cfg file the domU proceeds to boot but stalls with the following error. I cannot get past this - any ideas ? Brian Using config file "/etc/xen/vm/vm1". Started domain vm1 Bootdata ok

Here I don't want to start a discussion, but rather share a *solution* that took me some days to come up with. The whole stuff started with a power-outage. After reboot, my server (ext3) came back with the dreaded file system error (Ctrl-D to reboot or password for maintenance) - if you've never seen this, consider yourself lucky! In any case, I did the fsck as prescribed, but abandoned

Hello everyone, I''ve managed to configure and start Remus. However, it works only while the protected server is not loaded. As soon as I start a memory-intensive server application, the stream of Remus messages stops, leaving me with an error message. I think the message is not always the same, but here is what I''ve got from the last run: PROF: suspending at

Hi I got a strange error, happening on two of my ext3 partitions. What can be wrong? And why does e2fsck error out, instead of displaying an error message? Best regards keld fsck /dev/hda6 fsck 1.38 (30-Jun-2005) e2fsck 1.38 (30-Jun-2005) Warning... fsck.ext3 for device /dev/hda6 exited with signal 11. also From my dmesg: <1>general protection fault: e7a8 [#3] Modules linked in:

Hi, I was trying to run a guest OS with multiple partitions. I added a line like disk=[''phy:hda6,hda6,w''] in the configuration file. The disk was not mounted in the host OS. However, the kernel refuses to boot with an error message which says "kernel not syncing... attempted to kill init... rebooting...". When I remove that line, everything works. Is there

Hi! Does anyone know how many ACLs can be stored on file system (xfs) using acl_xattr module and in file file_ntacls.tdb? Best regards /Adrian Berlin -- You Rock! Your E-Mail Should Too! Signup Now at Rock.com and get 250MB of Storage! http://webmail.rock.com/signup/

Hi, I tried to convert my root partition from an ext2 to ext3 fs using tune2fs. I'm running a 2.4.10 kernel with ext3 support, but the partition is not mounted ext3. In fact the journal feature is missing from the superblock: # cat /proc/filesystems | grep ext ext3 ext2 # tune2fs -l /dev/hda6 | grep features Filesystem features: filetype sparse_super # ls -l /.journal

I posted this to the Fedora-test list but I''ll try here. If I need to ditch fedora rpms and move to building directly from src before posting here, please let me know and I''ll do so (apologies in advance if this is the case). I have the following Fedora RPMS installed: kernel-xen0-2.6.10-1.1155_FC4 kernel-xenU-2.6.10-1.1155_FC4 xen-2-20050222 I can

Hello, I've got a problem that is not solved after an e2fsck. What happens is that the kernel (vanilla 2.6.12) does this: journal_bmap: journal block not found at offset 1036 on hda6 Aborting journal on device hda6. ext3_abort called. The filesystem is mounted with errors=panic, so the system reboots. At boot-up an e2fsck is run on /dev/hda6. Sometimes it finds errors, sometimes not.

Dear all, I followed the instructions found on http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html to convert / on several of my boxes to ext3. Strange to me, on some boxes it perfectly worked while on others it didn't. One of the differences found is that on the ok-boxes mount reports: /dev/hda3 on / type ext3 (rw,errors=remount-ro) /* Settings: cat /etc/fstab /dev/hda3 / ext3

Background: This is a dual boot (Windows XP and CentOS 5.2 (32 bit) box. There were four (4) NTFS partitions. The C partition got full. I deleted the 4 NTFS partitions and did a clean install of Windows XP, into one (1) NTFS partition. I knew that I would need to install GRUB again and I did that, using the CentOS 5 Installation DVD. When I tried to boot into Linux, no joy. this is the GRUB error

Hi, "Mircea Popescu" <nufarul.alb at go.ro> schrieb am 29.01.02: > I have this problem: > I've partitioned my hard drive with PQMagic 7 in the following way: > hda1 - fat32 > hda2 - ext2 > hda3 - fat16 > hda4 - extended > hda5 - Linux Swap > hda6 - fat32 > hda7 - ext2 > hda8 - fat32 > > I've put syslinux on

HI, I am trying to find out why an old slower machineis faster than a new faster machine. I have a RedHat 6.2 server installation, it runs samba and I have been very happy with it. Filesystem is:- [darryl@keg darryl]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/hda6 1.2G 735M 387M 66% / /dev/hda1 40M 3.0M 35M 8% /boot /dev/hdc1

i have patched the kernel and recompiled the kernel with the ext3 support, however, when i boot up, i get this error below, what have i missed ? request_module[block-major-3]: Root fs not mounted VFS: Cannot open root device "hda6" or 03:06 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 03:06