similar to: Getting a Dom0 Kernel Version > 2.6.18 ?

I am getting a series of IOAPIC errors in xl dmesg on a Dell OptiPlex GX100 machine (bought in 2000). I also get an error from traps.c which is very similar to the one in the ''Getting mm.c errors from xl dmesg on certain hardware'' thread. This happens during system startup with no DomUs running. I have attached the xl dmesg log. _______________________________________________

Has anyone had any luck getting this to work? The kernel provide skge, sky2 and sk98lin modules all fail to load. I was able to download the latest version from the syskonnect.de site, and with some hacking/klduging of their install script managed to compile the module in there (a newer version of sk98lin, it seems) which recognised the card... but this isn't really sustainable 'cos new

Hi, I cannot have suspend and hibernate working on a Samsung NC10 (netbook) running CentOS 5.4 i386. When I try suspending/hibernating the screen becomes black (with a few logs, like "shrinking memory" for hibernate) and then the computer hangs and I have to force a shutdown with the power button. This wiki page seems to say that it should work out of the box:

I have been running af Asterisk server Version 0.7.2 for a while now But I I wanted to upgrade my version to the new 0.9.0 or the CVS 1.0 Stable. But when I install one of the new asterisk servers I having lots of troubles with the IAX connection between my servers. When I start the 0.7.2 asterisk server it shows me something lige this == Parsing '/etc/asterisk/iax.conf': Found ==

I'm new to the lists so sorry about any faux pas I may have made. Also I apologize for the length, but I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from

Hello, I''m facing a strange issue with network card PCI passthrough on my openwrt test domU. - With network PCI passthrough, DNS lookup failed for some domains (exemple, google.com) but not for other (free.fr my ISP, or my domain jbfavre.org). I can ping an IP address without any problem. - Starting domU as a "normal" (ie without PCI passthrough), no problem. As far as I can

Hi I?m a new user and I do test with my hardware . I have a x100p and telephone vozip. And when I run this command asterisk ?vvvvc for to test it . My computer show it ?warning? [chan_iax.so] => (Inter Asterisk eXchange) == Manager registered action IAX1peers == Parsing '/etc/asterisk/iax1.conf': Not found (No such file or directory) Apr 2 07:45:12 ERROR[16384]:

Hello, I had noticed strange crackling sound on my phone calls going through my zaptel device (TDM400P), so i decided to check on possible timer issue, and found lots of issues on forums concerning the sensibility of zaptel with IRQs, and tried about everything: moving PCI slots, noapic and acpi=off boot options, play with different kernel options: iosched/preemption/timer/..., play with

Hi all, I were upgrading my system recently. But I met some difficult problems, the biggest one is described in http://permalink.gmane.org/gmane.comp.emulators.xen.user/66971, unfortunately I got no answer yet. My original environment is xen3.4.2(64bit) + dom0 kernel 2.6.18-xen, and 4 domus with kernel 2.6.18-xen, after first upgrade stage, I have Xen4.1.0(64bit)+dom0 kernel 2.6.32.39, and 4 domu

Hi all, I were upgrading my system recently. But I met some difficult problems, the biggest one is described in http://permalink.gmane.org/gmane.comp.emulators.xen.user/66971, unfortunately I got no answer yet. My original environment is xen3.4.2(64bit) + dom0 kernel 2.6.18-xen, and 4 domus with kernel 2.6.18-xen, after first upgrade stage, I have Xen4.1.0(64bit)+dom0 kernel 2.6.32.39, and 4 domu

on an ASUS P5K-E wifi (wifi disabled in bios) board with: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) centos 5.1 did not configure the device. Anyone else see this or have a solution? Tried forcing sky2 module, but init just says device does not seem to be present even tho lspci shows it on the bus. Is there another kernel

I have a CentOS 5.2 install on a machine with the Marvell nic issue outlined in http://bugs.centos.org/view.php?id=2612. I have a few questions regarding this, what does the # echo "11ab 4364" > /sys/bus/pci/drivers/sky2/new_id line do? Obviously it starts right after but what specifically is the "11ab 4364" part? Also, how do I get this to load across reboots? I have the

You must update your gaphic card driver. Yor sistem run defult graphic drver you must update graph.

Hello, I''m trying to setup Xen on a machine with 2 physical network devices using linux bonding without success. I haven''t received any answer on my question on xen-users, the only discussion on this seems to be at http://lists.xensource.com/archives/html/xen-devel/2005-10/msg01174.html Could someone shed some light on state/ plans regarding Xen and bonding? Regards --

On 24/11/2019 14:33, Ebed wrote: > Hi, > > Here it is... > > > 05:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 > PCI-E Fast Ethernet Controller [11ab:4353] (rev 14) Thanks, that device requires the Marvell sky2 driver which is not supported in el8. I have built you a driver for CentOS 8.0 and uploaded it to the elrepo repository. It should be

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

Robert P. J. Day wrote: > Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> > > --- > > diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c Maintainers are apparently those under "PARAVIRT_OPS INTERFACE". CCs added. > index c12720d..e3ce5c8 100644 > --- a/arch/i386/kernel/vmi.c > +++ b/arch/i386/kernel/vmi.c > @@ -235,7 +235,7 @@ static

Robert P. J. Day wrote: > Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> > > --- > > diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c Maintainers are apparently those under "PARAVIRT_OPS INTERFACE". CCs added. > index c12720d..e3ce5c8 100644 > --- a/arch/i386/kernel/vmi.c > +++ b/arch/i386/kernel/vmi.c > @@ -235,7 +235,7 @@ static

Dear List Is there a package for leapfrog plotting (Hamiltonian Monte Carlo estimation) in R? I tried the actual "LEAPFrOG" package which doesn't actually give the plot like this one? http://xianblog.files.wordpress.com/2010/09/hamilton.jpg How doe one plot this in R? So, there semi-circle and dots on that semi-circle. I don't think curve() or plot() would produce such plot.

Which version of the ixgbe driver is included in 5.6? I went through all the RHEL5 release notes, but they only ever state that the driver was updated, not which devices was added. This device is not supported up to CentOS 5.5 (2.0.44-k2), but the latest driver from the Intel web site works fine (3.2.10). 05:00.0 Ethernet controller: Intel Corporation Unknown device 151c (rev 01) 05:00.0